Windows Won't Run Application

I tried to download iTunes for my new iPod (since they no longer come with the disc) but when I try to run the application I get a notification that pops up and it says "/iTunesSetup.exe is not a valid Win32 application."
If anyone can help me I'd appriciate it greatly seeing as I can't even use my iPod until I download iTunes 7. Thank you.
Windows XP

what are web accelerators?????????/ i turned off virus software and pop up controls, and i tried internett explorer??? help......... now i have version 6 on one computer (the one without the childrens library) and version 7 on the other computer (the one they have heretofore used for itunes). i'm so smart; was trying to get their library on both our computers. now i'm afraid to plug in either ipod.........

Similar Messages

Compiler won't run application

I downloaded Java 1.3.1_04 and I believed i installed it correctly when I compile a class the message is cannot run application. I set all paths correctly My dos prompt says the the Jre is installed. Why won't it run

try putting the full path before the javac command:
example:
c:\jdk1.1.4\bin\javac MyClass.java
if this works, then put that path:
example:
c:\jdk1.1.4\bin\
into your environmental path settings either through right clicking on my computer, or using your autoexec.bat in your c: drive:
example:
SET PATH=c:\jdk1.1.4\bin\
or by using the command msconfig at the command prompt.
Good luck,
Tim

Updating BIOS, Windows won't run the exe

I'm running Win7 Pro x64 and I want to update the BIOS on a a55m-p33 mobo. Live update just says 'download fail', so I've downloaded the file separately and put it on a pen drive as per the BIOS Update SOP. When I run the exe it says it isn't compatible with this version of Windows.
Anyone know why that would be?
Thanks.

>>Use the MSI HQ Forum USB flasher<< and point to the uncompressed archive from MSI or create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0), put the .exe on it and start it in dos (also described in the BIOS Update SOP).

Authorization window behind the running application

Hello.
My problem is that when launching my application with javawebstart,
it happens that the authorization window appears first, then my application appears then, and hide the authorization window.
The consequence of this is that the application is blocked until authorization has been completed. Unfortunately, the auth window is hidden behind the application and you have to use ctrl-tab to search for it.
If someone has found a solution, I'll be glad to hear from it.

Are you seeing this in 1.4.2_06 or 1.5.0 , or in some earlier version of Java Web Start ? There were similar plroblems with the shortcut dialog in early 1.4.2 versions, but they should all be fixed.
Is this "Authorization" window the TrustDeciderDialog shown for signed code ?
if so can you foward you jnlp file(s) ?
/Andy

Cron won't run applications

I use LuckBackup and have it setup to run every night at a certain time using cron and I noticed that Luckybackup will no longer start as scheduled. It seems like any application that requires the "X server" will not run. I tried the following test schedules to see if they would work and the only one that works is the "touch" command which doesn't use the X server.
12 23 * * * touch /home/gumper/crontest.txt
02 21 * * * export DISPLAY=:0.0 ; /usr/bin/gcalctool
02 21 * * * export DISPLAY=:0.0 ; /usr/bin/luckybackup
After cron tries to run gcalctool and luckybackup I get the following messages emailed to me:
Invalid MIT-MAGIC-COOKIE-1 key
(gcalctool:4124): Gtk-WARNING **: cannot open display: :0.0
And
Invalid MIT-MAGIC-COOKIE-1 keyluckybackup: cannot connect to X server :0.0
From comparing my pacman log and when Luckybackup stopped running as scheduled, it appears that it started immediately after installing Gnome shell and Gnome 3.
Any ideas on how to fix this?

ewaller wrote:I don't have a solution, but did you try the other solutions for X Apps the in the cron wiki page ??
I'll give the "xhost" command a try to see if it helps.

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this?

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.

What computer do you have? is it 32 or 64 bit operating system?

What windows applications won't run on a mac?

I'm about to go from PC to Mac and would like to get an understanding of what common applications won't run on a Mac. I'm not interested in things like MS Office and such which I know have Apple version, but I'm interested in Adobe Acrobat, Flash Player, Others such as Garmin, eBay Turbo Lister, Nikon View, etc. Seems to me I've heard that Flash files won't work on Apple Products. Are there apps that will allow some of these to run?
I don't think I have too many to worry about but I'd appreciate hearing what challenges others have had and what to expect in general.

All Office and Adobe products available on both platforms. Flash works fine on a Mac, just not on iDevices like iPads or iPhones.
Others that you've listed just find out if the developers have a Mac version. Do some research.

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

Why won't Firefox 4 on Mac OSX 10.6.7 quit when QUIT is selected? The window closes, but the application remains open necessitating a forced-quit. Until recently it worked fine. I've reinstalled Firefox but the problem persists.

Firefox 4 on Mac OSX 10.6.7 won't quit when QUIT is selected.
The window closes, but the application remains open necessitating a forced-quit. Until recently it worked fine. I've Downloaded Firefox again and reinstalled but the problem persists.

Perform the suggestions mentioned in the following articles:
* [[Firefox is already running but is not responding]]
-> Profile in use
* [http://kb.mozillazine.org/Profile_in_use]
Check and tell if its working.

I am having trouble running the New York Times Reader (Times Reader) application. It runs on adobe air. I've reloaded adobe air and the application, but it won't run. Any ideas?

I can't figure out why the Times Reader won't run on my Mac (OS 10.8.5). The application opens, but doesn't run. Nothing shows up on the screen except the menu bar at the top.
I have reloaded the application, and uninstalled and reinstalled Adobe Air, but neither has helped.
Loooking for ideas.

If it happens again then try to reload the website or clear the cache and the cookies from that website.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://support.mozilla.com/kb/Deleting+cookies
*http://support.mozilla.com/kb/How+to+clear+the+cache

HP Utility won't run in Windows 7

The HP Utility application for an HP Designjet Z3200 won't run in Windows 7. I browse to the application and nothing happens when I try to open it. I've rebotted several times as well as uninstalled and reinstalled the latest version of the app downloaded from HP.
Anyone have any clues as to why this is happening?
Tony

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

In DCOMCnfg "Run application on this computer" is grayed out for my application on two Windows 7 machines, but it works fine on all other machines

We have a COM application that is installed on hundreds of machines around the country. We have instructions included in our install doc of how to set up DCOMCnfg. On one machine in the field and one machine in our lab (both happen to be Windows 7 machines) the checkbox "Run application on this computer" on the location tab in DCOMCnfg is grayed out and therefore we cannot access our engine remotely.
I turned off UAC before installing (we found that the install works much better than way) and it is actually still off. I do not get any DCOM errors in the Windows Event logs when I try to access via DCOM, I just get the standard -2147023174 Server Error. I have added CallFailureLoggingLevel to HKLM\Software\Microsoft\OLE and set it to 1 to enable logging, but still no errors in the event logs.
I pulled a DCOMTest utility off of the Microsoft site. Initially it failed, but there were entries in the event logs indicating that it did not have the permissions it needed. I opened up those permissions and now that test utility works fine. So, DCOM is functioning between the two computers.
This application is used with DCOM by hundreds of people, so I know the application should be working properly. I have uninstalled and reinstalled to verify that everything is registered properly. I have tried turning off the firewall and the anti-virus. I am logged in as an administrator
I am at a loss. Any ideas?
Thanks

Hi,
This issue can occur if the current user profile does not have enough permission or related system file is corrupted. Please try the following steps to troubleshoot the issue.
1. Assure the current user account has administrator permission. If not, please add it to Administrators Group and then test the issue again.
2. Restart the machine in Safe Mode and logon to the machine with the account: administrator. Then, please check whether the option is grayed out.
3. If the option is still grayed out, please try this step.
a. Open C:\Windows\System32 folder and change the ownership of the ComUID.dll file from "trusted installer" to administrators group.
b. Rename that file as ComUID.dll.org
c. Copy the attached ComUID.dl_ file from the Windows 7 installation disk to C:\Windows\System32 folder and rename it to ComUID.dll
Thanks,
Novak

Just bought new PC running Windows 8.1. I have Install discs for Photoshop 4 and an upgrade to Photoshop 7. Unfortunately the Photoshop 4 Install disc won't run as it's incompatible with 64 bit. How do I install Photoshop 7 on my new PC? Is there a place

Just bought new PC running Windows 8.1. I have Install discs for Photoshop 4 and an upgrade to Photoshop 7. Unfortunately the Photoshop 4 Install disc won't run as it's incompatible with 64 bit. How do I install Photoshop 7 on my new PC? Is there a place I can download the Install files from?

Pagemaker is ancient, obsolete and unsupported. It was discontinued over 10 years ago. (Though why it is still sold is a mystery.)
If you want to run PageMaker, your best bet is to use a Win2K or WinXP PC.
Otherwise move to Indesign or look at Serif's PagePlus or Scribus.

Windows Won't Run Application

Similar Messages

Maybe you are looking for