Windows wont BOOT . . .Help Please

I turned on system this morning & windows wouldn't load & windows Boot manager popped up
Windows failed to start , A hardware or softwear change might be the cause ( I changed nothing & added nothing)
Status: 0XC 000 000F
Info: The Boot selection failed because a required device is in accessable.
The system is 2 months old & has been running great without any problems, this was just out of the Blue.
I swapped another new HD in place of the SSD - No Change
I swap ed all SATA cables & power cables - No change
I swap ed out the RAM - No change
When putting in windows disc, to try & boot from, (can not ) can not get past boot manager & (above message)
HD keeps disappearing in BIOS & RAM fails every first boot & then HD is there & RAM tests OK until save & reboot where everything goes wrong again???
I am at my wits end having tested everything except the Board & CPU everything else seams & tests OK in another machine
HELP!!!. . . Please
Sandy Bridge Bundle i5 2500K & MSI P67A-G45 SLI Motherboard
Antec Truepower New 650W Modular Power Supply PFC 80 Plus SLI Ready
Corsair F60 SSD 60 GB
G.SKILL Ripjaws X F3-12800CL9D-4GBXL 4GB 2X2GB DDR3-1600 CL9-9-9-24
LG GH22NS50 Black 22X SATA DVD Writer OEM
Microsoft Windows 7 Home Premium Edition 64BIT DVD OEM

Thanks for your reply, I had a Powercolor Radeon HD 6850 775MHZ 1GB 4.0GHZ GDDR5 Video Card installed but swapped it for a GT8800 with No change, so not the card.
I do not have another Power Supply to swap it out but I did reseat all connections & changed the power cable too the drive & SATA cable with no change, guess I will try & dig up a power supply tomorrow as its the last possible problem item other than the Board or CPU

Similar Messages

New board wont boot, help please

Hi.
I have just bought MSI K9A2 Platinum with a quad core phenom 9950 black edition cpu. and ati 4850 pcs 1GB gddr3 pci-e 2x 2BG corsair ram.
I built the rig but when i push the power button everything seems to work, fans spin, cpu warms up graphics card warms up (the heatsinks) but the monitor says no signal.
Sometimes the monitor goes into standby and other times it stays on but with no picture.
Has anyone come across this problem and does anyone have any ideas why this is happening?
I have cleared bios, unplugged all usb pins etc. tried with 1 mem stick and 2 , and un plugged hard drives.
Many thanks for any help.

Thanks for all the suggestions.
The board is now booting. one of the memory sticks is dead, wont boot with it in, take it out and its fine
The problem i am having now is i cannot create an array.
in the create an array options, option 1,2,3 don't do anything but 4 does.
I managed to format the drive and the OS is loading as i type, but when pc boots it says no array created, so if I am getting the Sata speed right, if an array isn't created then it wont be running at full speed.
Ive tried changing bios setting in sata control bit... IDE, Raid and a....... cannot remember other options, but none of them work.
OS is now up and running, everything seems to be working. just strange that it wont allow me to make an array.
Any ideas thanks

Keep getting ifmkw is compressed and wont boot help please

neede help

Sorry, never heard of "ifmkw is compressed".
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

Hi hope somebody can help? i have acrobat 6 pro, worked well for last two years but then just stopped working. Have reinstalled but still will not open, ronning windows 7. Help please!!

Hi hope somebody can help? i have acrobat 6 pro, worked well for last two years but then just stopped working. Have reinstalled but still will not open, ronning windows 7. Help please!! Janice

Hey janicem42177174,
Adobe no longer supports the installation and use of Acrobat 6 as it is a very old version which is not compatible with Windows 7.
I would suggest you to please use the latest version of Acrobat i.e. 11.0.10 which is fully compatible with your OS with its enhanced features and functions.
You might download a free 30-day trial version of Acrobat from here:
Download Adobe Acrobat free trial | Acrobat XI Professional
Let me know how it goes
Regards,
Anubha

HP DV4-1155SE Black Screen and Wont Boot. Please Help!

Hello all I am working on an Hp DV4-1155SE. I have tested the memory modules, the hard drive and everything else that I can take out of the computer easily. Everything works but!, The laptop will not boot into the bios or anything else. Black screen, wont boot and i have the bios file that HP supplies on the support page of the site. I have looked at the instructions that a few people have posted about re flashing the bios and that does not seem to help me at all with this AMD processor. If anyone can please offer any help at all this would be greatly appreciated.
Thank you!

I will search on int 19h....thanks.
My problem started before the bios-screen.
This is what I tried this evening:
- Disconnected all non-essential devices...no effect.
- Cleared the CMOS...system booted to OS! Screens still garbled!
- Put in an older graphics-card...No artifacts!
- Put my MSI NX6600GT (AGP) back in...screen grabled while booting. Once in OS everything
looks fine at first. Later I noticed some odd random pixels. Playing movies is working fine.
Playing 3D games results in all kinds of strange looking artifacts.
- Installed the latest NVidia- drivers...no effect.
Is my problem still MOBO related or Graphics Adapter?
Any further advice?
Thanks!

Powermac G5 wont boot. Please help!!!

my PowerMac G5 wont boot, power suply or graphics card? When i press the power button is the chime and then after a while (fem minutes) the fans start revving up, all with a black screen........

See if it will come up into Open Firmware and let you do an NVRAM reset.
Hold the cmd-option-O-F key combination when powering. If the screen actually comes up, you should see a light background with black letters. To do the resed, enter the following three commands.
reset-nvram <enter>
set-defaults <enter>
reset-all <enter>
I don't have a lot of hope, in one sense, but it you get the OF terminal screen, then that says at least that at its basic guts, the machine is sort of working, and we can go from there. And, if it does make it into OF, the resets might actually clear things up.

Frames w/Text-like u can do in Windows Movie maker- Help Please

not referring to Titles. I want fames with text in them, sentences and short paragraphs. I was on this forum until 2:30 am trying to find similar and only 1, referring to typewriter that is in wmm they said on the old HDimovie download which isn't availabe and was 2006 anyway.
Where is the feature? How do I do it like in Windows Movie Maker
Also- how do I add portions of letters to videos, cut them out in paintshop save them a jpeg and upload as pic to insert into movie and make the viewing time longer so people can read it.
I need frames with just type , not just titles.
HELP, please.
Thank you

it takes 3 apps' to do it, and *****,, they don't all fit, u have to plan ahead, and u can't edit them in the timeline like u can with windows movie maker, and found out they had this imovie HD6, and took out although had to paste in text still meaning using another app for some of them.
I can't believe apple took it out to force you to buy FCE.
downdloaded HD6, but it not importing movies already imported to iphoto 09 that then imported to imovie 09, the cutting, editing clips is easier in '09, and I can;t find video turials on 06, except to pay for, only pdf hard for me to read take in alot of type, brain shuts off, neuro problems and brain damage.
just abbout had it with mac and which had sent it back in time, they said give me $500 to keep it, then didn't give that much, i think big mistake for me.
i sitll tryin to hold on abit here, i just posted in iphoto as well, fed up with it, it got it for imovie'09 doesnt even ahve the features i need, they took them out, everything drag drop import here there and everywhere.
not impressed.
but thanks for help, yeah already did that, the crappy key notes got in my vid, and on desktop, 3 app's to do ot it and drag/importhem them al over kingdome come to do what is so simpiple in wmm, and hd6 it appears.

Shared technologies won't install off photoshop 11 disk windows 8.1 help please

"Shared Technologies" won't install off photoshop 11 disk windows 8.1 help please

Hi,
Kindly follow the below mentioned steps:
1. Uninstall all the instances of PSE by using CS Cleaner tool Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
2. Then restart your machine and reinstall PSE.
You can download PSE from Download Photoshop Elements products | 13, 12, 11, 10
Please let me know if you need any other assistance.
Thanks,
Swapnil

When i try to add new mail to my macbook pro it crash on me.but sometimes it says account verified but mail still wont open. help please

when trying to add new mail to my macbook pro it crash on me
help please
thank you

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

HT201413 cannot reinstall itunes, i get this message MSVCR80.dll not found. Try to reinstall itunes and i get error 7 (Windows erro 126) help please

cannot reinstall itunes, i get this message MSVCR80.dll not found. Try to reinstall itunes and i get error 7 (Windows erro 126) help please

See Troubleshooting issues with iTunes for Windows updates.
tt2

My ipod wont appear on my itunes source list and it appears in my computer but then a pop up comes and says deviced timed out in windows??HELP PLEASE ASAP!

I just got a 120 GB ipod classsic and it wont appear in my itunes source list and it appears in my computer.I have tired the 5 R's already.But a pop-up appears and says windows times out and i need to have my ipod for today.PLEASE HELP ME ASAP

if you have just got it most places give ipods a 1year garuntee so take it back to the shop to have it looked at pls put this as correct answer

I/O errors with certain discs- Windows w/Boot Camp Please help.

I wasn't sure which forum to post this problem in. It fits in a few categories, so I apologize if I've gotten it wrong.
I tried to install a game (Last Half of Darkness, 2005) yesterday, and with about 1/3 of installation complete, I got this message: An error occurred while trying to copy a file: I/O error 23. I had my choice of abort, retry or ignore. After the 1st error message I chose retry. After a bit more of the installation I got another error message: I/O 1117. I then tried to ignore, that didn't work, so I aborted. I tried to install a second time, and even tried a second copy of the same game, then tried to install the 2007 sequel to Last Half, same error messages. After each attempt at installation, I could not get the drive to eject the disc. I eventually did by restarting in OSX. My iMac is 13 months old. In November I had a similar problem with another game, this one from about 2004. In that case, the game installed, but froze a few minutes into playing. Because I couldn't play, and couldn't eject, without a great deal of time and "spinning" noise, I took the computer to the Apple Store to have them look at it. I figured that if it was 2 months from being out of warranty, I should get it fixed right then. Of course all the messing with it they did showed no drive problems. All other CD or DVDs, either commercial or homemade, music, video or games have installed and run just fine.
An internet search found this: http://support.microsoft.com/kb/891894 I did everything except the clean boot install, and contacting the manufacturer. After changing the transfer mode per these instructions, I could get all of 2/3 of the way through installation before the error messages popped up.
All drivers are up-to-date according to Windows automatic update and Apple update.
This is my 4th Mac, so I have little experience with PC/Windows. Can anyone give me a suggestion as to what I can do to install and play these games? Any help greatly appreciated.
Ruth

Hi Ruth,
I sure don't know what the issue is however you might want to go to the Bootcamp forum and post it, maybe someone knows there.
http://discussions.apple.com/category.jspa?categoryID=237
Regards,
Roger

My Macbook wont boot. Please Help!

its a new comp. and i was run the Mac OS X install disk when i realized someone did it for me earlier so i went to close it. I chose the pre-existing Mac OS X system on the comp and hit restart and the comp restarted but instead of booting up it went to a "DOS" like screen. It says:
localhost:/ root# IOBluetoothHCIController::start Idle Timmer Stopped
can someone please help me get out of this? to the main screen or to run the disk (its still in there i can't get it out!)? Please Help!!

You might try to reset the SMC and/or PRAM. I am out of options after that.

Another new comp that wont boot up. (please help)

I recently bought some parts to to build a new computer and i cant get it to boot up. The first time i tried it, the computer booted up fine for about 5 secs. Then, i heard 2 short beeps and it went dead. Now i cant even get the computer to turn on. Here is what i tried so far and the computer hasnt been able to turn on again:
removed everything except the cpu and heatsink, and tried it with different combination and got nothing
switch the memory to different slots
reseted the cmos
check to make sure the wire was plugged into the jpw1
recheck all my connection
Here is my spec:
MSI "K8T NEO-FSR" K8T800 Chipset Motherboard for AMD Socket 754 CPU
Mushkin 184 Pin 512MB DDR PC-3200 (non ecc) http://www.newegg.com/app/ViewProductDesc.asp?description=20-146-219&depa=0
Amd 64 2800
PSU 430w pic of the PSU spec
WD 80g sata
sapphire radeon 9800pro
liteon dvd burner
It has been awhile since i last built a computer, but i never had a problem before. THe last time i built a computer the highest cpu was a pent 3, so a lot of these new hardwares are new to me. These sata drives and everything is new to me but im pretty sure i set all the connections up right.
I have been reading through the forums and i found out that 2 short beeps can mean two things. Bad memory or post failure, but wouldnt my comp still turn on and continue to beep? I can't get the D-bracket 2 connector up to see what the problem is since my computer wont even turn on. I am planning to take my PSU apart later today to see if i blew a fuse when i get home. Until then, anybody know what is wrong? Is there anything else i can do to test what is wrong with the cpu? Am i right about the 2 beeping noises? any advices would be great. Thanx in advance.

I went to my trusty reminder book and your right. 2 beeps are a memory problem or failure to post. you said you checked everything and reseated your RAM and all. have you completely disconnected your power cord from the computer? even with the computer off the mobo will still get a small amount of power to it. if your using a ATX power supply. you may need to do this to get the mother board to reset it be able to turn it back on. if you have other compatable RAM try using it to boot the computer up. wish you luck and let us know the out come. DeMaxx

Windows wont BOOT . . .Help Please

Similar Messages

Maybe you are looking for