Windows wont recognize my ipod touch!!!!!!!!!!!
after i updated itunes,windows wont recognize my ipod.
Did that include this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Is the AMDS running?
Does the iPod apear in in My Computer (if PC)?
Have you tried other cables?
Have yu tried another computer to verify yu have a comouter problem?
You do have iTunes versio 10. 6 installed?
Similar Messages
-
Itunes wont recognize my ipod touch 5th generation and i tried updating itunes to 11.0.1 but i cant
itunes wont recognize my ipod touch 5th generation and i tried updating itunes to 11.0.1 but i cant what should i do?
it says somethings wrong with "apple moblie device"
-
Pc wont recognize my ipod touch
what do i do if my pc wont recognize my ipod touch
I had the same problems following the updater update on my ipod and pc. it became so bad that the mini pod became fried and i brought it back under warranty for a new one (and service charge of about $35 to swap them out!). When I got home I reinstalled all of the software from installation to itunes and it seemed to work. then i updated as prompted to the newer ipod software and got a serious error message again like before on my ipod and off and on recognition on itunes. i erased software again, reset pod a few times, and reinstalled without allowing the ipod updater to do anything to the original software. now it works again. warning against the updater. keep it old and simple.
-
My laptop wont recognize my ipod touch
my laptop wont recognize my ipod touch
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem
Your profile says iPod touch, Windows 98. You need XP or later -
Why won't windows 7 recognize my ipod touch after the latest updates?
I have tried everything in the apple support links and nothing is working. My computer used to recognize the ipod as a device and in itunes but now it is not recognized anywhere it only charges. Is there anything that was done in the last set of windows updates that is making this happen? How do I get my ipod to be recognized again?
You tried everything here:
iOS: Device not recognized in iTunes for Windows
including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
What does diagnostics show?
iTunes for Windows: Gathering and using iTunes Diagnostics -
when i plug in my ipod into the right usb port it makes the connecting noise but nothing pops up and itunes does nothing. then when i look into the devices list it is under a category called unspecified and says that it needs troubleshooting. if i run the troubleshooting program it says it could not find a solution to the problem. i want to know how to fix this.
I was struggling with this since my latest Itunes update. Fiirst it would not recognize my IPad as a device, after correcting that, it would list the Ipad in my device but my Sync had no options (summry, info, etc). and it kept saying it was "Accessing Itunes store". reading your question I suddently tried deleting the itunes task (alt-ctrl, delete, processes) and delete Itunes. (By the way, I had rebooted my computer several times over the last few days). I opened up Itunes, and voila. Device is there. No "accessing windows" and my sync has the normal options.
****..feels good to actually write an answer rather than writing a questions.
Eman -
Why wont my vista pc wont recognize my ipod touch
same question
I honestly don't know, However I would try the usaul suspects of disconnecting my device and swithing off the computer and on again as well as switching on and off the device. Then reconnect the device via the usb cable.
-
HELP!! itunes doesn't recognize my ipod touch and i've tried everything!!!
Alright, so i got an ipod touch this morning and came home to put music on it. first things first, it read it as a camera. i downloaded the new version of itunes and that seemed to take care of that problem. I tried everything on the apple website to try and fix the problem but it just won't read it. It works fine on my mom's computer but all my music is on this computer. what can i do??
Ok people after messing up three days with my jailbroken ipod touch cauze my itunes didn't recognize it i figured out that the problem is first windows recognized it as a imaging device o as a camera, i found in the device manager was listed mi apple ipod under portable devices and there was the problem it has to be listed under universal serial bus controllers named as a apple ipod so this is what i did but first make sure u have correctly installed itunes and the apple mobile device support:
1 open the device manager or windows button + r is run and then type devmgmt.msc
2 look for the portable devices and find the apple ipod or wherever that is listed on your pc.
3 once u find the apple ipod do a right click on it and click on uptade driver software
4 take the manualy opcion or browse on my computer and then look for this folder on your computer C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
there should be the driver that itunes recognize and your windows wont recognize your ipod as a camera again but i repeat u have to make sure u have installed the apple mobile device support u can get it by extracting the itunes+quicktime package using winrar. so click on update or next what ever on the update process and next time itunes will open your ipod for sincying thanks to forums ilounge.com -
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Windows 7 does not recognize my iPod touch 5--doesn't even charge the device. HELP!
My computer at work will not recognize my iPod touch generation 5. I've had increasing problems and now today when I plug it into the USB port, it will not recognize it.
I've uninstalled all the Apple, iTunes etc. software and reinstalled, I've rebooted the computer 3-4 times. I've uninstalled and reinstalled the USB driver.
It will not work. Ideas?Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
i have a white screen and i tried rebooting the ipod touch by holding the home and sleep button simoltaneously but it still jus tappears white. i also attempted to connect my ipod to itunes but my itunes wont even recognize my ipod touch 4g. What should I do now?
Just let the battery drain until the screen shuts off. When you charge it back up it should boot up normally.
-
My itunes on my windows 8 will not recognize my ipod touch
I have a new computer that runs windows 8. My itunes is installed but will not recognize my ipod touch. Any suggestions?
You want this link
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Also
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar -
Itunes does not recognize my iPod Touch using Windows 7 - 64bit
Itunes does not recognize my iPod Touch using Windows 7 - 64bit. Is this a driver issue? Has anyone else had this problem? Is there a fix?
Message was edited by: Mark DiGiacomohi sally,
see if this user tip by Yorkwill helps:
+In the end what works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:+
+1. First off you need to have iTunes installed and the ipod touch plugged in+
+and recognized as ‘something’ e.g. digital camera (it shouldn’t really+
+matter what it’s recognized as, but it needs to be found by windows).+
+2. Search for usbaapl in the C:\WINDOWS system folder:+
+o open windows explorer (e.g. Right-click Start and then click ‘explore’)+
+o right-click the WINDOWS folder and select ‘Search’).+
+o type in usbaapl and hit Search – try to ignore the dog!+
+You should find the driver info in a sub folder of+
+C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B+
+Remember that location (either leave the search box open or copy the folder+
+name into note pad – you’ll need it later)+
+If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not+
+been installed with the iTunes install and you’ll have to reinstall iTunes.+
+3. Locate the ipod-camera device:+
+o Open the device manager, e.g. using Start > Control Panel >+
+Performance and Maintenance > System > Hardware Tab > Device Manager+
+o Look for a device called ‘ipod’ - if your ipod shows up as+
+‘digital camera’ it will be under something like ‘imaging devices’.+
+4. Update the driver:+
+o Right click the ‘ipod-camera’ in device manager and click on+
+‘Update Driver’ – the Hardware Update Wizard will open.+
+o Check the ‘Install from a list or specific location’ then click ‘Next’+
+o Check ‘Search for the best driver in these locations’. Un-check+
+‘Search removable media’ and check ‘Include this location in the search’.+
+In the text box below type (or better copy and paste) the folder+
+containing the ipod driver information found in step 1 (in the example+
+above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B), +
+then click Next.+
+You should now see something like ‘Apple ipod device driver’ or so. Continue+
+installing that device. Once the driver has been installed the ipod will come+
+to life and iTunes (if you have it open) will show it.+
Maybe you are looking for
-
Getting Values from RFC into inputfield
hi all, I want an inputfield with the list of values from an RFC like there should be an inputfield in which i can enter my onw value or select a value from combobox like list that means a combo box with inputfield is required please help thanks Gaur
-
Battery not working for 7 hours
battery not working for 7 hours.. it working only for 3 hours or 4 hours
-
Only in a admin session works InDesign and Illustrator!
When I open some products (Indesgin for example) in a session without admin permission, it doesn't work. All is well y I open the software in a admin session but I don't like to use admin session normally, only for instalations. It's not so safe to w
-
It happens whenever I'm on the internet - banking etc. Usually the options - like how I want my name written - come up when I click in a box, and I can select the one I want. Now however when I click on the box the options flicker past quickly & no m
-
Adobe AIR ELS meddling with mail.app ????
All of a sudden, mail.app has decided that, in order to send any email, it needs to have keychain access to something called PrivateEncryptedDatak, which resides in ~/Library/Application Support/Adobe/AIR/ELS/com.apple.com<longStringOfNumbers>/ Any t