Windows would not connect with Airport ext

Hey!
I had to reset my Airport for my OSX. When I switch to windows on my IMAC, it won't connect. It use to before I reset. I can see it on the connexions available, but I get a message it can't find it.
Any help please?
Thanks!

I went into Network configuration and shows Airport ID that can not be changed (not shure whether it refers to the notebook hardware ID) On the ethernet Client ID is blank.
I was able to make connection once or twice before but not recently. Apparently it is a common problem with Mac Notebooks both G4 and Intel(I talked to other users that had a Mac) while PCs do not have the problem.
Other users were able to eventually connect by rebooting the computer.
Not sure if the problem became definite when I accessed wireless via Windows.
Tried to contact Apple Support on the phone but was told they do not provide support outside the US.
Hope someone can help since I really do not want to use Windows to access the Internet.
Do not know if it is a 802.11a, how can I tell?

Similar Messages

My itouch will not connect with airport even though I am entering the correct password

I have not had any problems with my Apple airport modem until today. When I went to use my I touch that I have been using for at least one year on the airport would not connect and my password that I have been using all along will not work. Any suggestions?

With some routers, during that first set up it asks you for the password, but what it really wants is the full security code, not the password. I have seen this many times. Go back to the router and get full code. It is usually a
Ong meaningless string. If you cannot find it, reset the router to make it generate a new one. When you trymto join the network on the pad, use that and not the password. See if that helps.
By the way, once you join, it will remember, and you will not need the string again unless you do a full restore or 'forget' the network.

CAN NOT connect with airport ??

I cant connect with my Airport, to my 2wire Home Portal 1000HG for some reason it always says There Was as Error joining Airport Networke "2WIRE538" it works fine with the LAN cable, but I would like to use it with wireless sometimes to, if anyone could help that would be awsome, I just dont want to sit on the phone with SBC yahoo or 2Wire for 5 hours

I suspect the version of the 2 wire you are using has one of 2 things either it is the wrong model for wireless connection, there are several, as shown.
http://computers.search.ebay.com/2wireDSL-ModemsW0QQfsooZ2QQfsopZ2QQsacatZ62023
If you have the correct 2 wire for wireless you may not haave the correct firmware, as shown below.
http://www.broadbandreports.com/faq/12110
Cheers Don

Firefox would open on Vista but would not connect with any website. I had to download Firefox again using IE in order for it to function. What's going on?

Using Firefox 6.0. No connectivity with any website yesterday.
The download was 5.0.1; which is now working and retains all features of the previous version including

You do not have the properties in the Bookmarks Manager (Library), but you should have it if you right-click a bookmark the Bookmarks Toolbar or in the bookmarks sidebar.
On Mac you probably do not have it if you right-click an item in the Bookmarks menu (this menu is under control of the Mac OS), but I assume that this should work if you click the "Show your bookmarks" button on the Navigation Toolbar that is next to the star to bookmark the current tab and right-click an item in the bookmarks list that opens.

Windows does not connect to Airport Express with WPA-Enterprise

Hey,
we are using some AirPort-Express stations at our office to provide a wireless network to our staff.
The APs use WPA/WPA2-Enterprise (linked to a RADIUS-Server) to check the users authority.
On Macs and iOS devices the connection to AP works fine but if we try to connect a Windows client, Windows shows up the login-screen, checks the password (if you try a wrong password it shows the login-screen again) but then it says that no connection is possible. We also tried it on another laptop (both using Windows 7 Professional), but it still does not work.
Can anybody help us?
Thanks!

This issue is often caused by Windows firewall, and sometimes caused by wireless interfernece. Try disabling the firewall or other anti-virus software. You can also directly connect you AE to your computer via ethernet to access the configuration.
If all else fails, you have hard reset the AE device and reconfigure.

HP Laserjet 1022 not connect with AirPort Extreme

Previously I connected to my airport extreme with ethernet from my Apple Laserwriter Pro 630. I bought a HP Laserjet 1022 and it connects through the USB port. It does not print. I have installed the HP Laserjet through my Printer Set Up Utility with my MacOS X 10.4.9 system.
What am i doing wrong?

I've no personal experience with your particular printer but these pages may help you
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
http://www.ifelix.co.uk/tech/1013.html
Steve

Retina MacBook Pro is not connecting with Airport Extreme 5 GHz signal

I believe I have done my due diligence to find the answer to my question here and other places but I must be missing it. I have a Retina MacBook Pro that as far as I know should select the 5 GHz signal from my Airport Extreme (Generation 1 with 7.6.4 firmware) which is literally 3 ft. from my computer. When I click on the Airport icon in the menu bar, it is indicating a 2.4 GHz connection. I have looked at discussions which say I can give separate names to to both the 2.4 GHz and 5 GHz signals. I can't seem to find that. I also read where you can reorder the order of signal preference. I can't seem to find that either. Interestingly, I have an Airport Express that is extending the network. When option clicking on its icon in airport utility, I can see both the 2.4 and 5 GHz information. I don't se that in the Airport Extreme. I am thinking about gettng the newest Airport Extreme but if I don't need to...
Thanks for any help!

as far as I know should select the 5 GHz signal from my Airport Extreme (Generation 1 with 7.6.4 firmware) which is literally 3 ft. from my computer
A Generation 1 AirPort Extreme is not a simultaneous dual band wireless router. It can produce either a 2.4 GHz....or....a 5 GHz wireless network signal, but not both simultaneously.
If you want the Gen 1 Extreme to produce and deliver a 5 GHz wireless network, it can do so, but any 2.4 GHz devices that you have will not be able to connect to the 5 GHz signal.
A new simultaneous dual band AirPort Extreme will produce both a 2.4 GHz and 5 GHz signal simultaneously. Wireless devices will automatically connect to the best signal quality based on their capabilities and location in relation to the AirPort Extreme.

I have just bought an airport time capsule and im trying to install an airport utility. I tried the 6 version but it wd not load because it said might mac would not support. I then tried the 5.6.1. and it said it would not work with airport capsule.

I have just bought an airport time capsule and i am trying to install an airport utility programme to support this
However, it seems the version 6 which came out last year - i can't use on my Mac - Snow Leopard -
So tried to then install version 5.6.1 and although this installed properly, it says this will not support my capsule
2. I have BT home hub 2. I presume I cannot bypass this as the internet router? I bought the time capsule for its capability to back up . The router was a byproduct. But am I correct in thinking that it acts as a secondary router or a booster rather than a primary router . I still need the BT homehub?
if anyone can help that would be great
CS J

You should either return the Time Capsule or upgrade your Mac at least to OS X 10.7.

I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my computer. How do I get them to match so that I would be able to use my cellphone number?

I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my phone number like it is supposed to be. How do I get them to match so that I would be able to use my cellphone number on my notebook?

To reset any OS X program just go to the folder and trash the affected files.
Open a new Finder Window
Click "Go" in the above status bar
Click and HOLD the "option/alt" key and you will see "Library" now show in the above list
Click Library while still holding the option/alt key and a new window will open with all of your system files
Go to the preference file (NOT Preference Panes)
Locate a file named <com.apple.FaceTime.bag.plist>
Locate another file named <com.apple.FaceTime.plist>
Locate the file <com.apple.iMessage.bag.plist>
Drag the files to the trash
Delete the trash
Close FaceTime and iMessage if not already closed
Relaunch FaceTime and iMessage from Applications folder
This should reset the program back to default. You will have to put your information back into the program but it should work.
Good Luck.

Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?

Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?

First thing to try is reset Printing System:
OS X Mavericks: Reset the printing system
Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

why doesnt my 5th gen ipod nano not connect with windows 8?

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

My itunes on a windows 7 pc with dsl connection will not connect with the itunes store

my itunes on a windows 7 pc with dsl connection will not connect with the itunes store. Any suggestions about why not or how to get it to connect?

After reading the whole post, I still don't capture the exact error message or code from it when you failed to install Office 2013.
The only clue is that "bootstrap loader error" ...
It seems that you want to upgrade Office 2007 to new Office 2013, by default, we could complete the uninstall previous Office version and install the new Office in the installation wizard.
At this point, if you get the install source through CD or other media. I recommand that we copy/paste the installation to local drive. Then turn off all of anti-virus and firewall, begin to setup in
Windows clean boot mode.
Please use a setup log to troubleshoot setup problems in Office if the installation problem still occurs.
http://support.microsoft.com/kb/826511/en-us
Tony Chen
TechNet Community Support

HT1695 Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts?

How to De-authorize an older PC running Windows 2000 with iTunes 7? My itunes will not connect with the iTunes store to all the de-auth request.

How to De-authorize an older PC running Windows 2000 PC with iTunes 7? My itunes will not connect with the iTunes store to all the deauth request.

The "Deauthorize All" command is only available if iTunes thinks you are currently using 5 authorizations.
Otherwise, you can only deauthorize the old computer by using "Deauthorize this computer" from the computer itself.
If the old computer is no longer operable, you can't deauthorize it, but that is not a problem.

HT1386 My Iphone 5S would not sync with any PC (Windows 7).

My Iphone 5S would not sync with any PC (Windows 7). It was working fine until a few days ago! now my phone would not charge nor sync with any PC (I have try personal computer, work, etc) everytime a message will appear and would say "USB device not recognized, the USB device attached to this computer has malfuctioned and windows does not recognized it" I have not make any changes. All I did was install Zedge app in my PC and Iphone and try to download a ringtone from it. Please if someone can help me I would appreciate it.
Thanks

Settings, Mail Contacts and Calendars, Select the Gmail account, Select "Fetch new Data, and you can try changing the interval to PUSH. If that doesn't work, change the Fetch frequency to something shorter. It sounds like you have it set to manually.

Windows would not connect with Airport ext

Similar Messages

Maybe you are looking for