Windows X64 and 1 speaker work

Hi, I have a creative inspire p5800 5. surround system.
Since i installed windows xp x64 and downloaded appropriate drivers only the base and front right speaker works.
Lots of other people with different systems appear to be having similar problems with this x64 business and only having stereo, but their fixes arnet working for me.
I cant seem to find any drivers or tips that can correct this issue, without going back to normal windows xp.
Any help would be awsome!

Let me guess, CMSS is disabled?

Similar Messages

  • I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

    I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
    I have tried everything and nothing works.

    sound problems:
    #Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
    #Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
    <p>Additional references
    * [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
    * [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
    * [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

  • I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    it is a windows 8

  • HT5219 how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

    how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

    Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
    www.drbott.com

  • I have windows 7 and EasyLink wont work neither will 192.168.1.1

    I have windows 7 and EasyLink wont work. Now I tried the 192.168.1.1 and even that wont work! I have a WRT54GS and I know it works because when I usee the two laptops connected to it, it works perfectly except when too many users get on my wifi connection then it overloads

    I'd suggest trying a factory reset, that should clear any password that was set and forgotten, as well as any settings that are preventing you from talking to it (like the router address having been set to something other than 192.168.1.1).
    There's usually a recessed reset button on the back that is accessed via an "unrolled" paperclip.  Just press that button and count to about 30, and then wait until the router comes up again and try the 192.168.1.1 address.
    If you have a cable modem, then I'd suggest that you write down the MAC address of the primary computer that was used to configure the router, and then try changing the MAC address on the router to that when you get back in touch with it (via the 192.168.1.1 web GUI).  The factory reset may change the router back to it's original MAC address, which may prevent your cable modem from being happy.

  • Problems with Windows x64 and Sound blaster l

    Hey, I have this issue with my sound blaster li've. I've just recently installed Windows x64 and now I'm having issues with my sound. It creates this weird echo sound with a small static sound everytime a game. Prior to loading any applications, the sound is just fine. I had this issue when I had Windows XP but I installed the Li've applications and was able stop that. But I can't install that application for Windows x64. Is there any solution to this? Thanks in advance.

    kennydo you have aim or msn or anything where we can talk, because i have relati'vely same stuff as you. Thanks very much

  • Vista x64 and Microphone not work

    Hi folks,I've installed and am running Vista x64 and the sound is working fine but the mic is misbehaving. In the 'Speakers Properties', 'Levels' tab, I have the microphone set to 85 and unmuted. This way the microphone works but I get bad feedback and I have to listen to myself droning on through the speakers. I've tried muting & unmuting this but nobody can hear me speaking in Teamspeak. Am I condemned to having to blast my neighbours with feedback or is there a way I can talk through the mic and have my voice come through on Teamspeak instead of coming through my speakers Many thanksPete P.S. System is a 4gig, dual core, Audigy 4Drivers are the latest Vista ones from the creative site.Oh and it all worked fine on XP by the way

    Go to recording properties, select levels and increase mic to 85. Also add 20db boost.go to speaker properties, select levels tab and mute the microphone.....Fixed..

  • Windows x64 and recently released Sounblaster Live! 64 bit driv

    I downloaded the new SB Li've! drivers (Creative Sound Blaster Li've! x64 Driver (2.23MB) released 2 Augh 05) - uninstalled all Creative programs and all Audio drivers on my system, and proceeded to install the drivers as instructed. I reboot my system and I get sound...but only in my front left, front right, and subwoofer. I go to my sound and audio settings, switch my advanced settings to 7. home theatre, and still only the 2 front speakers and the sub are working. Why would Creative release a driver that doesn't work? Any help? [email][email protected]][email protected][/url] or AIM = t0ide
    I've been trying to make this thing work since I've been using Windows x64...about 5 months now. Any help is highly appreciated.
    Mike

    Let me guess, CMSS is disabled?

  • My address bar does not autocomplete. Running Windows XP and it was working but not now. How do I start the autocomplete?

    My computer crashed and it has been restored. I am running Windows XP and I did not re-install Firefox Aurora after the computer was restored with new motherboard and HDs. All of my software works, but the autocomplete does not. Firefox remembers my username for logging in and my password. It is just the autocomplete. I have to completely type in the website name. When I open the History and Bookmarks window, there are no entries. The yellow star in the address bar also does not work. When I click on it, nothing happens.

    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    Please report back soon.

  • I recently tried to upgrade my itunes on my dell laptop with 64bit Windows 7 and it stopped working completely. So I tried deleting and installing all over again and haven't been able to reinstall it since. I've tried numerous things i've read in forums

    I recently tried to upgrade my itunes on my dell laptop with 64 bit windows 7. It stopped working so I deleted all files and tried to reinstall and haven't been able to since. I've tried numerous things i've read in forums and nothing seems to work. The installation will not move past the "publishing product information" point. After being stuck there for a while this error message appears:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",process or Architecture="x86"', Please refer to Help and Support for more information. HRESULT: 0x800736FD
    I hope someone is able to help me with this.

    Did you already try what bnoir suggested in this post about error 0x800736FD:
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?
    This thread might help as well, suggestion provided by bnoir:
    In general, these ones tend to be caused by underlying problems on the PC that can prevent Windows Updates from installing. So my main strategy with them is to try to fix the Windows Update issues. If we can get Windows Updates flowing again, that generally clears up the iTunes install errors +en passant.+
    Head into your Windows Update, and check for any new updates. Do any fail? If so, open your Update History and doubleclick on the failure entries to bring up a small box with alphanumeric error message codes. Are you getting 8000FFFFs? (They often seem to be associated with an iTunes-install 0x800736FD.)
    If you're getting 8000FFFFs, try the following Microsoft document:
    [Windows Update Error 8000FFFF|http://windows.microsoft.com/en-US/windows-vista/Windows-Update-Error- 8000FFFF]
    Head back to Windows Update, and stock up on any updates you're behind on. Once you're completely up to date in that regard, try another iTunes install. Does it go through properly this time?
    Message was edited by: Ingo2711

  • HT4111 can headset and bluetooth speaker work at the same time?

    On my iPad, can the headset option and a bluetooth speaker work at the same time? I am using the headset to listen to music, but I want my spouse to be able to hear the same music using a wireless bluetooth speaker in the other room.

    Sorry, of course I tried it and it did not work!
    To clarify, can it be MADE to work? The basic hook up does not seem to allow for both. I was hoping an intellengent, helpful person might be able to assist a novice.

  • Bt mail on windows phone and tablet not working

    In the last 2 weeks the bt email on my MS Surface has stopped working. it just tells me that my account is unavailable. Inhave checked all the settings on all looks good but it atill won't work. At the same time I started having problems on my Nokia Lumia 625 and although it works most of the time it seems confused thinking it hasn't updated but has, I get annerror message 80004005. Sometimes it doesn't work at all for a day but then works. Both these problems started at the same time. have bt made some changes that are affecting my windows mobile devices. All is good on android devices and on outlook on my desktop PC.

    Didn't help, made it worse, got a different error message and no email downloaded, at least with the auto settings it works but with an error message. I will keep looking, it would be good if bt had a reason for this and would let us know what it is.

  • Itunes refuses to recognise my ipad telling me that i need to uninstall itunes and reinstall the itunes 64bit version for windows - i am on windows 7 and all was working fine until suddenly for no reason at all itunes had some apple support error

    I have windows 7 and all has been fine until 2 days ago when suddenly i turned on my laptop and i got some error message about some apple support program error - i didnt tkae notice of it only that i couldnt run itunes, so i uninstalled and reinstalled itunes and it now runs as normal, but now it wont recognise my ipad saying that 64bit version is not installed - WHAT RUBBISH IS THIS? i downloaded and installed the 64bit version from applie and yet the error persists - can some one please tell me how i can get itunes to recognise my ipad again - this seems like such a ridiculous error for these two apple products to be conflicting with each other - please help

    well i have found that i needed to not just uninstall itunes, but also apple mobile device support, bonjour apple software update and apple application support - uninstall all these and then install itunes - that seesm to have fixed it, though now i am sync fail - that's a different matter perhaps

  • Install 46D EXT2 on Windows x64 and Oracle 10g

    Hello,
    When i try to install a SAP 4.6C system on Windows ORACLE 10.2.0.2 and Windows AMD_64 (x64).
    I've got an error in the creation of the database (see below). The Centrale instance wae created successfully.
    I've changed KERNEL CD to the 46DEXT2 (INSORA102_0.SAR) version and also applied OSS Note 976457 to update various Windows DLL .
    The problem is when launching R3SETUP, it goes to subdirectory ZSAPORAICL like you can see.
    Why ? Is there's an error on 46D Kernel CD ?
    Do you have any idea ? Already had the same problem ?
    Thanks for your help
    Best regards
    Gaël
    INFO 2008-10-31 11:13:09
        Creating Database Instance
    INFO 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA SyCoprocessCreate:931
        Creating coprocess C:UsersproadmInstallZSAPORAICLBINORADIM
    INFO 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA ExecuteDo:0
        DIM-00019: Message 19 not found; No message file for
        product=RDBMS, facility=ORADIM
        O/S-Error: (OS 1073) The specified service already exists.
    INFO 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA ExecuteDo:0
        RC code form SyCoprocessWait  = 19 .
    ERROR 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA ExecuteCheck:0
        Exit code from C:UsersproadmInstallZSAPORAICLBINORADIM: 19.
    ERROR 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA InternalInstallationDo:0
        Phase failed.
    ERROR 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA InstallationDo:0
        Phase failed.
    ERROR 2008-10-31 11:13:09 InstController Action:0
        Step DBCREATEINSTANCE_NT_ORA could not be performed.
    ERROR 2008-10-31 11:13:09 Main
        Installation failed.
    ERROR 2008-10-31 11:13:09 Main
        Installation aborted.

    Hi.
    You will get the detail installation of "Oracle Policy Manager" in the following link.....
    http://www.oracle.com/technology/obe/obe10gdb/install/lsinstall/lsinstall.htm#t3
    Regards
    Shweta.
    DBA
    IBCS-PRIMAX Software(Bangladesh) Ltd.
    [email protected]

  • Win 7 pro smooth window exit and open not working

    Hi all,
    I have a thinkpad T400 and after playing GTA San Andreas,(the colour scheme got changed to windows 7 home basic) when I closed the game, the scheme changed back into windows 7 pro.
    But, I have noticed that when a window opens, it opens suddenly like win XP and not smoothly like the win 7(this even applies for closing the window.....).
    I confirmed this after I set up another account in my laptop and that account turns out to work perfectly....
    can someone please tell me what to do about this problem?
    Thanks,
    Chris

    It appears you either don't have the QuickTime plug-in installed or it is turned off.
    The page worked fine for me.
    Your version of Internet Explorer is showing an "image" placeholder and, obviously, QuickTime is a .mov file.
    http://movies.apple.com/movies/paramount/missionimpossible_3/mission_impossible_3-tlr1h.640.mov
    Open QT Player, Open URL (File menu) and paste the link above. If it plays QuickTime works. Paste the URL in a different browser and see if it works. If it does then the QT plug-in works which means the issue is with IE.
    I would throw IE off my PC and get a real browser.

Maybe you are looking for

  • How to restrict two items in one sales order.

    Hi , My client wants that in one sales order two material say Mat -A and Mat-B should not go together. It should go in seprate sales order due to chemical nature both product should go  seprately. Kindly advise me how to configure it. Give full detai

  • Problem with "Database Gateway for SQL Server"

    Hello, i am testing the different technologies for connecting an oracle database with a sql-server database. The way using 10g-generic-connectivity with ODBC works fine, but the 11g-DG4MSQL makes problems. Environment: Server PEGASUS (32bit Windows S

  • How can I download music from itunes store at a higher bit rate than 128k?

    I have been able to import music from cd's at bit rates higher than 128kbs by clicking into the preferences item under the "edit" drop down menu. however, I have not been able to locate a similar command for itunes music downloads. is it possible to

  • Video chatting is NOT working.. please HELP!

    alright, this is driving me CRAZY! my firewall is off on my mac and my router. all my ports are open 1-65535. this is driving me nuts.. why isn't video chatting working??!!? i am using leopard.

  • Automatically update of the info record price conditions from last purchase

    Dear. I need to massive update the info record price conditions from the last purchase order price for a list of materials. Does exist a standard transaction where I can I do this ? Thanks.