Windows x64, EMET 4.1 and Spotify

I am running Windows x64 Home Premium with EMET v4.1. So far everything has been fine. Yesterday I tried to install Spotify and got an ESrror 53. When I contacted Spotify, they said "Error
53 is usually due to restrictions in place on the computer."
I then tried installing Spotify on my Windows Home Premium x32 laptop, also running EMET v4.1 and it installed fine.
Anyone able to install Spotify client on x64 with EMET?
I did try disabling features in EMET as part of the troubleshooting process.

does removing the emet client resolve the issue? The normal EMET mitigation's don't protect services but rather user mode applications. It could be changes to system wide mitigations though possibly
GBS Premier Field Engineer Cybersecurity Check out my blog http://blogs.technet.com/kfalde or better yet check out http://technet.com/wiki and start contributing :)

Similar Messages

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

Windows x64 and recently released Sounblaster Live! 64 bit driv

I downloaded the new SB Li've! drivers (Creative Sound Blaster Li've! x64 Driver (2.23MB) released 2 Augh 05) - uninstalled all Creative programs and all Audio drivers on my system, and proceeded to install the drivers as instructed. I reboot my system and I get sound...but only in my front left, front right, and subwoofer. I go to my sound and audio settings, switch my advanced settings to 7. home theatre, and still only the 2 front speakers and the sub are working. Why would Creative release a driver that doesn't work? Any help? [email][email protected]][email protected][/url] or AIM = t0ide
I've been trying to make this thing work since I've been using Windows x64...about 5 months now. Any help is highly appreciated.
Mike

Let me guess, CMSS is disabled?

TSP and Windows X64

I have a CCM in version 4.0 and TSP version was 4.0(0.2203).
I try to install the CISCO TSP in Windows X64 but it is doesn't works.
In the Advanced tab, I can't see any "Cisco IOS Telephony Service provider". All works perfectly in other windows version.
Witch TSP version was compatibly with Windows X64??
Thanks for your help
Regards
Sebastien

As of now TSP is not compatible with Win xp 64 bit because TSP drivers are not yet available.Drivers for all the other versions are available.

Nano and windows x64

Hi,
I've just got my computer up and running after getting a replacement motherboard. During the time I didn't have my computer I purchased a Nano which I used on the family computer with no problems (running windows xp). When I plugged my Nano into my computer windows and itunes doesn't recognize it and I think its the sign for an empty battery shows up on the screen of the Nano when it is connected. I'm already running version 5.0.1 of itunes, which I was told on another forum would fix my problem, but it hasn't
Any help would be greatly appreciated.

You'll probably need to go to Microsoft and Apple to seek support for the iPod (of any type) on Windows XP x64 Edition... and I don't think you'll have much luck.
I personally decided against XP x64 because I saw this kind of thing coming... In my opinion XP x64 is no more than a Windows ME... for M$ to make a few bucks on and offer limited support to those that will unknowingly help them develop Longhorn/Vista. There are not enough significant improvements to move me from XP 32-bit considering some of my peripherals would no longer function and the mfg's indicated they were not going to produce drivers unless there was a huge demand... there has not been.

Problems with Windows x64 and Sound blaster l

Hey, I have this issue with my sound blaster li've. I've just recently installed Windows x64 and now I'm having issues with my sound. It creates this weird echo sound with a small static sound everytime a game. Prior to loading any applications, the sound is just fine. I had this issue when I had Windows XP but I installed the Li've applications and was able stop that. But I can't install that application for Windows x64. Is there any solution to this? Thanks in advance.

kennydo you have aim or msn or anything where we can talk, because i have relati'vely same stuff as you. Thanks very much

"iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."

Whenever I connect to the iTunes store i receive an error message "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This causes iTunes to close. I am using iTunes version 10.5.0.142 on a Windows Vista (64) PC. I have reinstalled iTunes selecting the "repair" option and also uninstalled and reinstalled iTunes. Any help will be deeply appreciated. Thank you. Below is the result of the diagnositc.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
HP-Pavilion BN474AV-ABA HPE-150t
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 002FAD94098CD0E0
Current user is not an administrator.
The current local date and time is 2011-11-13 22:08:54.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2cb3fff3fa771d265b0f8ffdcca13b55
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {F4A2029C-16AA-4BDF-8DB7-9EC2A75B5991}
Description: Realtek PCIe GBE Family Controller
IP Address: 192.168.1.6
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Nov 13 21:09:29 2011
Lease Expires: Mon Nov 14 21:09:29 2011
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-13 22:02:08.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: hp DVD A DH16ABLH, Rev 3HD9
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 15:40 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: hp CDDVDW TS-H653R on CDR media at speed 24X.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
Bruce's iTouch, iPod touch (2nd generation) running firmware version 4.2.1
Serial Number: 1C9053CC201
**** Device Sync Tests ****
Sync tests completed successfully.

Same exact thing with me. And no help from apple. Just dropped nearly $600 and cannot get a decent working setup.
Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
The crash happens only on iTunes store access.

Windows Vista Drivers for 1820 and 1616 - Lets have some drivers ple

RePost from http://www.productionforums.com/view...?p=47643#47643<img alt="" src="http://www.productionforums.com/images/icons/icon8.gif[/img]?Lets have some drivers please
<span class="postdetails">Windows Vista Drivers for 820 and 66
I hate to say this about E-MU but the way they are dealing with Vista Drivers is unprofessional. I am a repeat customer of Creative products and was so impressed by my old Platinum eX that I bought a second to run duals for tons of audio processing. That was back in the day. Then I jumpped ship and tried out an M-Audio Firewire 40. That did not last too long beforei was completely unimpressed. So I came back to Creative... Purchased a 820 in the box. So impressed I turned around and purchased a 66 in the box just 8 months later. Both ran smooth as butter... All until i just recently built my new system designed primarily with audio production in mind.
With a setup like this, who needs a mac?
AMD Athlon X2 x64 Dual Core +6000 3.0 Ghz
2 Gigs Corsair
Samsung SyncMaster 206BW 2" Wide Screen
EVGA NVidia 9700s 256 DDR3 Graphics
SATAs up the yin
and a PCIMIA to PCI Dock
All under Vista Ultimate OEM
And Guess what?
Months into RTM of Vista...
E-MU is caught pushing release dates.
Last month it said they would release beta drivers middle of April...
I waited, patiently I might add.
I waited<waited some more, I try running xp drivers... computer wont even try to install them properly.
My software waits, computer waits, turns into a gameing machine just because my all together 600 dollar investments in Creative are not important enough to leld me the drivers i need to be producti've in what i love.
I need x64 drivers stat. I need them working, I need them installable without a glitch, a hitch, no driver signing problems, no questions, no fuss no muss. I find it ironic that you guys at E-MU are willing to jump right in there and make sure to have drivers compatable for you new products, yet faithful advocats of the most powerful soundcards you have are sitting here dead in the water because you dont find it nessesary to place priority on ready and waiting end users who have purchased long term support buy investing large amounts of moola into hardware from your company.
Come on, its not like the 820 or the 66 are exactly legacy technology. We are talking about Hardware that is only two years old and should be usable for up to 6 years. This is deffinatly a strike against the company and just goes to show where Creative stands.
I have stood by waiting in silence for a very long time.
Now i think my time has come to tell how i feel and i believe there are alot of others out there that feel the same. the only items that do not work soothly are my E-MUs... go figure.
And I have been looking forward to all i can do running both of them side by side.
Oh yes, and that link posted above to the beta news for vista... its a joke. open up your betas, and have a real dev tell us what the hang ups are... At least give us real concreate reasons why it is taking so long.
with that said, when you guys get yoru act together and get me some drivers, I will sit happy as a lark.
My thoughts for today.
~Alpha-Beta ReaKKtor

Hello Silas,
sorry for my bad english
I already checked that page. On the first time I was trying to install Vista on a clean hard drive. The installation process finishes without errors but after installation Vista shows me a lot of error messages, mostly about unknown hardware. So I installed all available drivers I have found on Toshiba web site. It not helped me too much, hardware problems still remains. I could not find out what exactly causes probles. Finally I decide to install XP and then upgrade to Vista. Now everything seems to be ok. :D
There was some hardware problems but much easier to resolve. It seems to me that Toshiba did not provide all the drivers, for example StarForce Protection drivers. Vista did not recognized this hardware on the first time.
Now it works!

Windows 8.1 Installation, Setup, and Deployment - English (United States)

I have 1 GB RAM 3.0 GHZ pro. 20 GB c Drive.
I am using Windows 8 Pro 32-bit.
Can I use 64-bit OS Windows 8.
system Type; > 32-bit operating system, x64-based processor,
Plzz Reply

yes, bigger RAM better for Windows 8.1 64 bit
and you can install a 64-bit version of Windows 8.1, but you'll need to buy it as a DVD and perform a clean installation. You won't be able to keep any files, settings, or apps when you update from a 32-bit to a 64-bit version.
Please note that the Windows 8.1 Pro Pack is used to upgrade from
Windows 8.1 to Windows 8.1 Pro, and isn't for cross-architecture installs and doesn't include any media. If you want to change architectures, buy
Windows 8.1 Pro

How to install apex on windows x64 with 10gR2?

Hello,
today I tried to install the http-server for our 10gR2-database. We are using windows x64.
But I cant find OHS for this release. How can I install apex then?
Regards,
Mark

have you tried the installation, or did you just ask in advance?
in the last wekks i did a lof of installation stuff on an x64 system using the old x32 versions. even oracle sw like 10.2.0.3 client etc.
and most oft the stuff was up and running just like on an x32 system.
just keep in mind that the directory structure an x64 is slightly different #
if u install x32 software the default installation path is "C:\Program Files (x86)" and in the registry a speacial key hklm\software\wow6432node
just in case you need to patch.
in my opinion it would be worth to give i a try, but remember not on a productive system.
i'd like to hear about your results
regards peter
Edited by: yeti on Jul 3, 2009 2:41 PM

J2SE 1.4.2 for Windows x64 bit download link

Dear All,
Can any one give me the link to download J2SE 1.4.2 for Windows x64 bit architecture?
Your help is highly appreciated.
Regards,
Syed

There should be no issues with using SAP JVM from the start.
Probably no notes because is straightforward:
- Extract the SAP JVM (e.g. c:\sapjvm_4)
- Set JAVA_HOME (c:\sapjvm_4)
And start installation as per guide.
We have done this recently with Solman 7 EHP1 and NW 7 EHP1 (J2EE stack).
We did have issue on central instance install where the J2EE instance would not start part way through installation (server0 continually crashed and restarted with memory issues) so we had to adjust the instance settings as per SAP Note#1603093, before retrying in SAPINST and continuing.
We had this problem with both Solman & NW 7 EHP1.

Oracle Express Database - Windows x64

At the risk of being seriously repetitive, I'll post a question I have seen in various forms for approximately 3.5 years. The user community needs to have a specific, fact-based answer to the problem of no x64 support on Windows. In several threads one can find via Google, people purporting to be Oracle representatives claim a supported version will be available "soon". Soon in my neck of the woods generally means a time frame less than 3 years, but what do I know. Can someone please, please provide a definitive statement of direction on this issue, and assuming this is coming "soon", it would be overwhelmingly wonderful to have a specific date. My company plans/desires/hopes to release software that would embed an Oracle Express db, and frankly I'm about to throw in the towel if I can't get some visibility to this question. As I've heard from many ex customers, "there's always Sql Server".
Regards, Roger Carter, President, DBConnect Solutions, Inc.

Thanks for the update. I followed up with Oracle internally via our Oracle Partnership channel, and they checked with the VP of development responsible for XE. The official response is "there is no date where this will be provided for Windows x64. It is, however, under consideration." In my 25+ years of working with Oracle, I will give you my translation - it is not going to happen anytime soon, and to your point, it will probably be version 12 before you see anything. For us, this is a huge disappointment, and it means we will be abandoning many thing with Oracle. It's my view that they don't care about this vertical one bit.

11g R2 - 2 node RAC on Windows X64 2003 Server

hi
we are soon going to start building a 2 node 11g R2 RAC on Windows X64 2003 server
questions
1. In 11g R2, is creating 2 disk group DATA and FRA still considered the best practice?
2. On which disk group should we place the OCR and Voting Disk
3. If there are issues placing OCR and Voting Disk on ASM (there definitely appears to be some concerns / reported issues on this), is using OCFS2 still a viable option?
4. Can someone point us to a document such as step by step installation of 11g R2 RAC on Windows with ASM or best practices 11g R2 RAC on Windows?
thanks

A bit late maybe, but you can check Note 811271.1 - RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows).
Edited by: olmartins on Jun 2, 2010 11:53 AM

Installation XE 11. on Windows x64 ( 64-bit) 2008

Dear All ,
I want to know if latest XE edition is certified on Microsoft Windows x64 (64-bit) 2008 OS ?
We have installed specific version on Windows x64 (64-bit) 2008 OS.
We get the following error :
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
and there is a respective Doc ID :
Note 1060806.1: OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
Action Plan
========
1. Install 64-bit version of Oracle database software.
2. Upgrade the database from 32-bit version to 64-bit version.
Can we use Oracle XE on specific OS ?

Hello,
I want to know if latest XE edition is certified on Microsoft Windows x64 (64-bit) 2008 OS ?No. See [url http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#BABHICJH]XE's System Requirements for details.
Similar error messages have been reported here before, e. g. in {message:id=10665775}.
It seems possible to get XE started on 64bit Windows, but it might be a hard fight, especially on a server OS with other possible traps..
Can we use Oracle XE on specific OS ?Sure, all certified 32bit Windows versions or 64bit Linux versions would be fine. See {thread:id=2278170} to get a full report.
-Udo

Installing 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64

Dear all;
I just downloaded 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 on my local pc...I am trying to run the install.bat after unzipping the file however, the black pop-up window comes up and disappears almost immediately. Does anyone know what is causing this. Also all help is appreciated with the installation. Kindly note, I have read the installation manual and it is not really helpful.

this is the content of it
@echo off
REM ====================================
REM ODAC 11.2.0.2.1 XCOPY INSTALL SCRIPT
REM ====================================
REM
REM This batch file installs components in an Oracle Instant Client Home
REM
REM ====================
REM MODIFICATION HISTORY
REM ====================
REM
REM 11/15/10 - change version number to 11.2.0.2.1
REM 06/30/10 - change version number to 11.2.0.1.2
REM             Add ODP.NET 4 and ASP.NET 4 components
REM 08/21/09 - change version number to 11.1.0.7.20
REM 08/21/09 - remove component odp.net 1.x
REM 01/22/08 - Handle directory names with spaces
REM 01/22/08 - Fixed oracle.key file generation so that products that rely on
REM             it can reference the appropriate registry location
REM 01/22/08 - Log all xcopy operations to the install.log in the destination
REM             directory
goto :ParseArgs
REM **********************
REM INSTALL ALL COMPONENTS
REM **********************
:InstallAll
REM installing everything so set DEP to false or else dependencies such as
REM basic client will get installed needlessly by each component
set DEP=false
call :basic %1 %2 %3 %4
call :odp.net20 %1 %2 %3 %4
call :odp.net4 %1 %2 %3 %4
call :asp.net %1 %2 %3 %4
call :asp.net4 %1 %2 %3 %4
call :oledb %1 %2 %3 %4
call :oramts %1 %2 %3 %4
goto :EOF
REM ************************
REM INSTALL ASPNET Providers
REM ************************
:asp.net
REM echo Please wait... installing Oracle Providers for ASP.NET
if {%DEP%} == {true} (
call :odp.net20 %1 %2 %3 %4
echo *************************************** >> %2\install.log
echo Installing Oracle Providers for ASP.NET >> %2\install.log
echo *************************************** >> %2\install.log
REM copy the files
xcopy asp.net %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM pass in false for dependency because odp.net2x files are not copied over yet
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat asp.net %3 false
call configure.bat asp.net %3 false
popd
echo.>> %2\install.log
echo ************************************** >> %2\install.log
echo Oracle Providers for ASP.NET installed >> %2\install.log
echo ************************************** >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Providers for ASP.NET installed in an Oracle Instant Client Home.
goto :EOF
REM **************************
REM INSTALL ASPNET Providers 4
REM **************************
:asp.net4
REM echo Please wait... installing Oracle Providers for ASP.NET 4
if {%DEP%} == {true} (
call :odp.net4 %1 %2 %3 %4
echo ***************************************** >> %2\install.log
echo Installing Oracle Providers for ASP.NET 4 >> %2\install.log
echo ***************************************** >> %2\install.log
REM copy the files
xcopy asp.net4 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM pass in false for dependency because odp.net4 files are not copied over yet
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat asp.net4 %3 false
call configure.bat asp.net4 %3 false
popd
echo.>> %2\install.log
echo **************************************** >> %2\install.log
echo Oracle Providers for ASP.NET 4 installed >> %2\install.log
echo **************************************** >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Providers for ASP.NET 4 installed in an Oracle Instant Client Home.
goto :EOF
REM *******************
REM INSTALL ODP.NET 2.0
REM *******************
:odp.net20
REM echo Please wait... installing Oracle Data Provider for .NET 2.0
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ******************************************** >> %2\install.log
echo Installing Oracle Data Provider for .NET 2.0 >> %2\install.log
echo ******************************************** >> %2\install.log
REM copy the files
xcopy odp.net20 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat odp.net20 %3
call configure.bat odp.net20 %3
popd
echo.>> %2\install.log
echo ******************************************* >> %2\install.log
echo Oracle Data Provider for .NET 2.0 installed >> %2\install.log
echo ******************************************* >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Data Provider for .NET 2.0 installed in an Oracle Instant Client Home.
goto :EOF
REM *****************
REM INSTALL ODP.NET 4
REM *****************
:odp.net4
REM echo Please wait... installing Oracle Data Provider for .NET 4
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ****************************************** >> %2\install.log
echo Installing Oracle Data Provider for .NET 4 >> %2\install.log
echo ****************************************** >> %2\install.log
REM copy the files
xcopy odp.net4 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat odp.net4 %3
call configure.bat odp.net4 %3
popd
echo.>> %2\install.log
echo ***************************************** >> %2\install.log
echo Oracle Data Provider for .NET 4 installed >> %2\install.log
echo ***************************************** >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Data Provider for .NET 4 installed in an Oracle Instant Client Home.
goto :EOF
REM *************
REM INSTALL OLEDB
REM *************
:oledb
REM echo Please wait... installing Oracle Provider for OLEDB
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ************************************* >> %2\install.log
echo Installing Oracle Provider for OLE DB >> %2\install.log
echo ************************************* >> %2\install.log
REM copy the files
xcopy oledb %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat oledb %3
call configure.bat oledb %3
popd
echo.>> %2\install.log
echo ************************************ >> %2\install.log
echo Oracle Provider for OLE DB installed >> %2\install.log
echo ************************************ >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Provider for OLEDB installed in an Oracle Instant Client Home.
goto :EOF
REM **************
REM INSTALL ORAMTS
REM **************
:oramts
REM echo Please wait... installing Oracle Services for MTS
if {%DEP%} == {true} (
call :basic %1 %2 %3 %4
echo ********************************** >> %2\install.log
echo Installing Oracle Services for MTS >> %2\install.log
echo ********************************** >> %2\install.log
REM copy the files
xcopy oramts %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
REM not calling confifure.bat as follows since on Win2k when dir names contain
REM a space it has issues when retreiving CURRENT DIR in configure.bat
REM call %2\configure.bat oramts %3
call configure.bat oramts %3
popd
echo.>> %2\install.log
echo ********************************* >> %2\install.log
echo Oracle Services for MTS installed >> %2\install.log
echo ********************************* >> %2\install.log
echo.>> %2\install.log
REM echo Oracle Services for MTS installed in an Oracle Instant Client Home.
goto :EOF
REM ***********************************
REM INSTALL Basic Oracle Instant Client
REM ***********************************
:basic
REM echo Please wait... installing Basic Oracle Instant Client
echo ************************************** >> %2\install.log
echo Installing Basic Oracle Instant Client >> %2\install.log
echo ************************************** >> %2\install.log
REM copy the files
xcopy instantclient_11_2 %2 /E /F /R /Y >> %2\install.log
echo.>> %2\install.log
pushd %2
call configure.bat basic %3
popd
echo.>> %2\install.log
echo ************************************* >> %2\install.log
echo Basic Oracle Instant Client installed >> %2\install.log
echo ************************************* >> %2\install.log
echo.>> %2\install.log
REM echo Basic Oracle Instant Client installed.
REM echo.
REM echo Please prepend %2 and %2\bin to system path environment variable
goto :EOF
REM =======================
REM Parse Script Arguments
REM =======================
:ParseArgs
if /i {%1} == {} goto :Usage
if /i {%2} == {} goto :Usage
if /i {%3} == {} goto :Usage
if /i {%1} == {-h} goto :Usage
if /i {%1} == {-help} goto :Usage
REM install dependencies or not - default is true
set DEP=true
if /i {%4} == {false} set DEP=false
if NOT EXIST %2\*.* (
mkdir %2 > NUL 2>&1
echo ****************** >> %2\install.log
echo ODAC install files >> %2\install.log
echo ****************** >> %2\install.log
REM /R to overwrite readonly files at destination
REM /Y to overwrite an existing file without prompting
xcopy configure.bat %2 /R /Y /F >> %2\install.log
xcopy unconfigure.bat %2 /R /Y /F >> %2\install.log
xcopy uninstall.bat %2 /R /Y /F >> %2\install.log
echo.>> %2\install.log
if /i {%1} == {basic}     goto :basic
if /i {%1} == {odp.net20} goto :odp.net20
if /i {%1} == {odp.net2} goto :odp.net20
if /i {%1} == {odp.net4} goto :odp.net4
if /i {%1} == {asp.net}   goto :asp.net
if /i {%1} == {asp.net2} goto :asp.net
if /i {%1} == {asp.net4} goto :asp.net4
if /i {%1} == {oledb}     goto :oledb
if /i {%1} == {oramts}    goto :oramts
if /i {%1} == {all}       goto :InstallAll
goto :Usage
:Usage
echo.
echo Usage:
echo   install.bat component_name oracle_home_path oracle_home_name [install_dependents]
echo.
echo Example:
echo   install.bat all       c:\oracle myhome       (install all components)
echo   install.bat odp.net2 c:\oracle myhome true (install ODP.NET 2 and its dependent components)
echo   install.bat odp.net4 c:\oracle myhome true (install ODP.NET 4 and its dependent components)
echo   install.bat asp.net2 c:\oracle myhome true (install ASP.NET Providers 2 and its dependent components)
echo   install.bat asp.net4 c:\oracle myhome true (install ASP.NET Providers 4 and its dependent components)
echo   install.bat oledb     c:\oracle myhome true (install OraOLEDB and its dependent components)
echo   install.bat oramts    c:\oracle myhome true (install ORAMTS and its dependent components)
echo   install.bat basic     c:\oracle myhome false (install Oracle Instant Client)
goto :EOF

Windows x64, EMET 4.1 and Spotify

Similar Messages

Maybe you are looking for