Windows XP 32 bit SP3 and Windows 7 64 bit
Can I use Network Magic Pro to share files, and the printer between the two operating systems?
devolic wrote:
Can I use Network Magic Pro to share files, and the printer between the two operating systems?
Hi devolic,
Read this thread.
http://forums.linksysbycisco.com/linksys/board/message?board.id=Network_Magic&message.id=1645#M1645
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.
Similar Messages
-
Adobe Reader X 10.1 Install Failing on XP SP3 and Windows 7 (64 bit)
After using the Customization Wizard 10 to create an .mst and executing the install via SCCM 2007 which I have done many times before, I am getting the following error on both the XP SP3 and Windows 7 (64 bit) machines in the Application Event Log:
Product: Adobe Reader X (10.1.0) -- Error 2229.Database: . Could not load table 'ServiceInstall' in SQL query: SELECT `Name`,`DisplayName`,`ServiceType`,`StartType`,`ErrorControl`,`LoadOrderGroup`,`Dependenc ies`,`StartName`,`Password`,`ComponentId`,`Directory_`,`FileName`,`Arguments`,`Description ` FROM `ServiceInstall`, `Component`, `File` WHERE `ServiceInstall`.`Component_` = `Component`.`Component` AND (`Component`.`KeyPath` = `File`.`File`) AND (`Action` = 1 OR `Action` = 2).
I used the following .msi to create the.mst:
AdbeRdr1010_en_US.msi
Does anyone know where to go from here?
Thanks, SandyI have found another possible bug affecting network printing with 10.1.2 in Protected Mode on XP SP3 machines that has not been previously documented:
A number of users in one office were not able to print with 10.1.2 in Protected Mode (even with the printing hotfix/patch previously released) to their default printer; however they were able to print fine with 10.0.1 in Protected Mode OR by disabling Protected Mode in 10.1.2. They could print to Microsoft XPS Document Writer, however.
The cause was determined to be an issue with capitilization of the printer name in the registry! 10.1.2 in Protected Mode seems to be sensitive to this for some strange reason, though other apps don't care.
Check the following keys and ensure the capitalization of any references to name of your printer (or UNC path of the printer share) is consistent:
HKCU\Printers\Connections
HKCU\Printers\Settings
HKCU\software\microsoft\windows nt\currentversion\windows\Device
In our case, the reference to the name of the default printer was in lowercase, while the printer path recorded under settings was in UPPERCASE. Changing this to match immediately fixed the problem. -
Windows XP SP3 and Dreamweaver 8.0.2 - "Error"
Windows XP SP3 and Dreamweaver 8.0.2
I am recently receiving this error message whenever I open a file -
"The following translators were not loaded due to errors:
ColdFusion.htm: has configuration information that is invalid.
JSP.htm: has configuration information that is invalid."
Really big problem;
I have lost ALL my disc so I can not do a clean install of anything!
Any help would be greatly appreciated.Try clearing your program cache...
http://forums.adobe.com/thread/494811
If that doesn't help, try restoring the preferences...
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If you still have the activation number, you can try reinstalling a clean version available here (make sure you are logged into Adobe):
https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads -
I have windows xp sp3 and cannot install adobe reader
I am trying to download application forms,
and i have windows xp sp3 and Adobe states you do not have the service requirements to download,i thought you could download Adobe on xp sp3.
Any Advice would be appreciated.SARNDIE12 wrote:
Adobe states you do not have the service requirements to download
I have never seen such a thing; where are you trying to download the Reader from?
Anyway, try this direct download http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.4.0/en_US/AdbeRdr940_en_US.exe -
Difference between SP3 and SP2 ?
Hi,
Did anybody encountered any difference/problem in deploying the same EAR
with supporting jar files in SP2 and SP3 ?
I have an EAR (with 2 EJB jars and a WAR) that encloses additional
supporting jar libraries, referenced by the EJB and WAR using Class-Path in
the manifest file. But this seems to work in SP2 and NOT to work in SP3,
where I get ClassNotFoundError in the EJB/WAR, sign that it cannot find the
supporting jars.
I appreciate all the help you can provide ! Thanks !
EugenHi sunny46,
Microsoft has published an overview http://www.microsoft.com/downloads/details.aspx?FamilyID=68c48dad-bc34-40be-8d85 -6bb4f56f5110&DisplayLang=en and Wikipedia has also some infos http://en.wikipedia.org/wiki/Windows_XP
XP Home is only avaiable as a 32-bit version, the only avaiable 64-bit Windows XP is a XP Pro.
But don't try it since 64-bit XP is not supported by Apple.
Using XP SP2 or SP3 is fine with BootCamp.
However there are some reports to be found here, that there are difficulties when you have installed an XP SP3 and want to use the BootCamp Driver Update 2.1.
Personally I would get a XP SP2 and use the standalone SP3 update package.
Later on you can use the XP SP2 CD and the SP3 updater to make a slipstreamed XP SP3 installation CD yourself.
Hope it helps
Stefan -
Audigty 2 and XP SP3 and 5.1 speakers
Ok, just a little info first. I have a Dell XPS Gen2 PC (2003), XP SP3 32bit, with a Dell supplied Audigty 2 card, ATI Video card 9600. I have finaly ended up get it working by cleaning all creative software form my PC and installing only the SBAX_WBUP2_LB_2_09_006.exe file.
That gave me one icon (Creative Audio Console) that i can adjust things in like speakers selection, EAX, CMSS, etc. But i have no way to adjust the 5. speakers, like the front center or the subwofer. Do i need to install any thing else or should i have installed something else first. Please help with this install question if you have figuired it out.
Now for my long story
Things were fine for years then after some windows update the volume would change to match the master volume in WPM if you used the seek bar in WMP0. If you then clicked on the WMP volume adjust it would go back to the scaled volume, this would happen over and over again and was annoying. So the fix was (per microsoft) to update the driver. After i updated the driver everything seem OK no more volume problem, BUT in time i learned i had a different problem with the newer drivers, static in the speakers at random times for no reason. Pop and clicks. Again very annoying
No mater what i tried, it was either the old drivers from the CD with the volume problem or the new driver with pop and clicks. So i came here to fine out what to do. All that you get here is a bunch of people like me with stories about how F$%^up this POS SB Software is and no one can tell you the correct order, files?or method to install drivers correctly today (2009), because it works differently for everyone and if you are lucky, you can get back to normal some how with a dri've cleaning and reinstall of your choice of a "guess" of what will work for you. The FQA's are a joke and NO one from Creative seems to have posted anything that i can find to help people know there are doing the install correctly. Some files are dri'ves only others inculde a console, none inculded the orginial software that was on the CD. Some driver will let you think that they will work with the software from the CD but that has never worked even on XP for any of the current drivers or the betas. Many of the updates required software be installed before you run them, BUT the software from the CD is not at a high enough revision for it to run. I have knocked my head on the wall to many times at this point and have no clue anymore. I am a PC GURU but not anymore.
After about 60 hours and close to 00 reboots, and many uninstalls and system cleanups, trying many different sets of files and such, it is clear that it would be cheaper to go buy a different sound card.
I can clean my system of all creative driver and software and install from the CD no problem except the volume problem in WMP and have many nice little apps that help me adjust my sound. If i then install any of the newest drivers i have no sound and almost all the apps from the CD no longer work.
If i install just the newer drivers without any CD software?they don't even work with my card and i have no speaker or volume control at all (all grayed out in control panel) and no creative icons in the strat menu.
I seem to remember that one time i installed all from the CD and then updated to the SBAX_WBUP2_LB_2_09_006.exe , and i still had sound, some of the CD apps still worked but some didnt BUT i had the pops and clicks problem. But the last time i tried it nothing worked.
Please post what files and in what order you installed you Audigty 2 software on your XP 32bit system
Message Edited by Rainey on 03-3-2009 08:08 PMRe: Audigty 2 and XP SP3 and 5. speakersP Thank you so much, your link to Daniel's dirver pack was just what i was looking for. He should be working for Creative as that is just what has been missing. I did not know where to get all though apps and auto update did not show them to me either. This is better then what i had before.
Now time will tell if i get the static, pop and click problem with these but right now i love them.
I really think it sounds better then they every did.
Now we talking, cooking with gas and lisening to the Blues
Big Thanks to you and great big thanks to Daniel_K for the driver pack
Rainey
Message Edited by Rainey on 04-0-2009 05:44 PM -
Message Bridge between WLS 6.1 sp3 and MQSeries 5.2
Hi,
I'm really struggling with getting the Message Bridge working with Weblogic 6.1
sp3 and MQSeries 5.2. Currently I have both installed on the same Windows 2000
machine. First I'll pose some questions that I have, then I discuss the error
I'm getting. Here are my questions:
1. With the jms-xa-adp.rar there is a ra.xml and a weblogic-ra.xml. Within the
ra.xml deployment descriptor there are config-properties for ConnectionURL, InitialContextFactory,
ConnectionFactoryJNDI, and DestinationType. If my MQSeries Queue is the source
jms destination bridge and my weblogic queue is the target jms destination bridge,
what values do I set for the listed config-properties? I can't seem to find any
documentation on what these values should be. Am I missing something? Do these
values even have to be set?
2. When I go to install a Weblogic instance to a different physical machine what
has to be installed in terms of MQSeries? So I'll have MQSeries on physical machineA
and Weblogic on a different physical machineB. I want machineA to forward all
messages placed on a MQSeries Queue to forward them to machineB where the weblogic
Queue resides. Does machineB also have to contain an MQSeries installation?
Or can I just grab the necessary libraries and jar files and place them on the
Weblogic machineB so they can be included?
3. Is it correct that if I distribute Weblogic onto one physical server and MQSeries
onto a different physical server that I cannot use Exactly-once quality of service?
Other notes:
1. I have the following patches installed for Weblogic 6.1 sp3:
CR081404_610sp3.jar
CR081511_61sp3.jar
2. Here is the commands I used to create my ConnectionFactory and Queue within
MQSeries:
def xaqcf(MQTestConnectionFactory) qmanager(QM_jeff)
def q(MQTestQueue) qmanager(QM_jeff) queue(default)
Okay...here is my error:
<21-Aug-02 11:08:34 ADT AM> <Error> <MessagingBridge> <Error occurred in bridge
"Messaging Bridge" during transferring messages (java.lang.Exception: java.lang.
reflect.UndeclaredThrowableException: java.lang.reflect.InvocationTargetException:
javax.resource.ResourceException: Error creating consumer or receiving message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1086)
at weblogic.jms.adapter.JMSBaseConnection.receiveInternal(JMSBaseConnection.java:774)
at weblogic.jms.adapter.JMSBaseConnection.receiveCommon(JMSBaseConnection.java:656)
at weblogic.jms.adapter.JMSBaseConnection.receive(JMSBaseConnection.java:811)
at weblogic.jms.adapter.JMSConnectionHandle.receive(JMSConnectionHandle.java:111)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.connector.common.internal.ConnectionWrapper.invoke(ConnectionWrapper.java:60)
at $Proxy82.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1215)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:854)
at weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.
Has anyone see this error before? Here is part of my ra.xml file....I just put
these entries in to see what happens:
<config-property>
<config-property-name>ConnectionURL</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property value>file:/C:/Develop/app_servers/WebSphere/MQSeries</config-property-value>
</config-property>
<config-property>
<config-property-name>InitialContextFactory</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>com.sun.jndi.fscontext.RefFSContextFactory</config-property-value>
</config-property>
<config-property>
<config-property-name>ConnectionFactoryJNDI</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>MQTestConnectionFactory</config-property-value>
</config-property>
<config-property>
<config-property-name>DestinationJNDI</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>MQTestQueue</config-property-value>
</config-property>
<config-property>
<config-property-name>DestinationType</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value></config-property-value>
</config-property>
<config-property>
<config-property-name>AdapterType</config-property-name>
<config-property-type>java.lang.String</config-property-type>
<config-property-value>XATransaction</config-property-value>
</config-property>
Here is a snip of my config.xml:
<MessagingBridge AsyncEnabled="false" DurabilityEnabled="false"
Name="Messaging Bridge" QualityOfService="Atmost-once"
SourceDestination="Source JMS Bridge Destination"
TargetDestination="Target JMS Bridge Destination" Targets="myserver"/>
<JMSBridgeDestination
AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
ConnectionFactoryJNDIName="MQTestConnectionFactory"
ConnectionURL="file:/C:/Develop/app_servers/WebSphere/MQSeries"
DestinationJNDIName="MQTestQueue" InitialContextFactory="com.sun.jndi.fscontext.RefFSContextFactory"
Name="Source JMS Bridge Destination"/>
<JMSBridgeDestination
AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
ConnectionFactoryJNDIName="imagictv.platform.ToolkitRequestCF"
ConnectionURL="t3://localhost:7001"
DestinationJNDIName="imagictv.platform.ToolkitRequestQueue"
InitialContextFactory="weblogic.jndi.WLInitialContextFactory" Name="Target
JMS Bridge Destination"/>
Any help would be greatly appreciated. Thank you in advance for your help.
Sincerely,
Jeff
I tried your suggestion and it worked!! The only thing is, it
makes the deployment of the resource adapter a little more
complicated. Now my customers are going to have to edit their
config.xml, instead of just dropping in the appropriate rar into
the applications directory. But one nice side affect of placing
the rar's in a different directory is it makes the Message
Bridge a little more stable. I was finding it to be very
unstable. One time I would startup my Application Server and
everything was fine, then I would shutdown. The next time I
started it up, I would get exceptions. I have yet to see that
behavior with this new configuration.
Thanks again for all of your help, it is greatly appreciated!!
Jeff
Dongbo Xiao <[email protected]> wrote:
>Looks like that somehow you have the adapter deployed
>multiple times, may not be intended. The cause is that
>everything in the application directory will be automatically
>deployed and all of them are added to the config.xml. During
>the next boot, those appear in the config.xml will be deployed and
>everything in the application directory too. As a result, the adapters
>are deployed twice. The complain about runtime mbean not found may
>mean the one that is overridden by the new one.
>
>The work around is not to put your adapters in the application
>directory, instead, put them in a different directory and point to
>the directory in your config.xml.
>
>Dongbo
>Jeff wrote:
>>
>> One more thing...
>> I noticed that the exception specified that it couldn't find
>> mydomain:Location=myserver,Name=jms-xa-
>> adp_Pool_1,ServerRuntime=myserver,Type=ConnectorConnectionPoolRun
>> time MBean, but what's interesting that if I run the following
>> java weblogic.Admin GET -type ConnectorConnectionPoolRuntime -
>> property ActiveConnectionsCurrentCount -url
>> http://localhost:7001 -username xxxx -password xxxx I get the
>> following output:
>>
>> {MBeanName="mydomain:Location=myserver,Name=jms-xa-
>> adp_Pool_3,ServerRuntime=myse
>> rver,Type=ConnectorConnectionPoolRuntime"{ActiveConnectionsCurren
>> tCount=0}}
>> {MBeanName="mydomain:Location=myserver,Name=jms-notran-
>> adp_Pool_2,ServerRuntime=
>> myserver,Type=ConnectorConnectionPoolRuntime"{ActiveConnectionsCu
>> rrentCount=0}}
>>
>> So from that...it looks like the MBean is there. Any ideas why it
>is not being
>> found?
>>
>> Thanks,
>>
>> Jeff
>>
>> "Jeff" <[email protected]> wrote:
>> >
>> >
>> >
>> >Thank you very much!!
>> >
>> >I tried your suggestions and created a general Queue Connection Factory
>> >within
>> >MQSeries. Then I setup my MQSeries JMS Bridge Destination to use
>the
>> >jms-notrans-adp.rar
>> >resource adapter. With this configuration, I can send messages to
>MQSeries
>> >and
>> >they get forwarded to Weblogic.
>> >
>> >But, if I create a XAQueueConnectionFactory within MQSeries I cannot
>> >get the bridge
>> >working at all. I realize that MQSeries has a bug with Transactions
>> >and remote
>> >servers, but I have MQSeries and Weblogic running on the same machine.
>> > I thought
>> >I could setup an XAConnectionFactory in MQSeries, set the MQSeries
>JMS
>> >Bridge
>> >Destination to use the jms-xa-adp.rar and specify Exactly-once QOS
>and
>> >it should
>> >work? I tried it and it didn't work. ( see attachment for weblogic.log
>> >showing
>> >exception ).
>> >
>> >Here is my config.xml:
>> > <MessagingBridge AsyncEnabled="false" DurabilityEnabled="false"
>> > Name="Request Messaging Bridge" QOSDegradationAllowed="true"
>> > QualityOfService="Exactly-once"
>> > SourceDestination="Source JMS Bridge Destination"
>> > TargetDestination="Target JMS Bridge Destination" Targets="myserver"/>
>> > <JMSBridgeDestination
>> > ConnectionFactoryJNDIName="imagictv.platform.ToolkitRequestCF"
>> > ConnectionURL="t3://localhost:7001"
>> > DestinationJNDIName="imagictv.platform.ToolkitRequestQueue"
>Name="Target
>> >JMS Bridge Destination"/>
>> > <JMSBridgeDestination
>> > AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
>> > ConnectionFactoryJNDIName="MQTestConnectionFactory"
>> > ConnectionURL="file:/C:/Develop/app_servers/WebSphere/MQSeries"
>> > DestinationJNDIName="MQTestQueue"
>> > InitialContextFactory="com.sun.jndi.fscontext.RefFSContextFactory"
>> >Name="Source
>> >JMS Bridge Destination"/>
>> >
>> >Again, thank you very much for your response. It helped me a great
>deal.
>> > Any
>> >thoughts on the above problem please foward them along.
>> >
>> >Oh...and to answer the question posed to me, yes the CR081511_61sp3.jar
>> >file is
>> >dated 8/13/2002
>> >
>> >
>> >Sincerely,
>> >
>> >Jeff
>> >
>> >Dongbo Xiao <[email protected]> wrote:
>> >>Please see my comments inline.
>> >>
>> >>
>> >>Jeff wrote:
>> >>>
>> >>> Hi,
>> >>> I'm really struggling with getting the Message Bridge working with
>> >>Weblogic 6.1
>> >>> sp3 and MQSeries 5.2. Currently I have both installed on the same
>> >>Windows 2000
>> >>> machine. First I'll pose some questions that I have, then I discuss
>> >>the error
>> >>> I'm getting. Here are my questions:
>> >>>
>> >>> 1. With the jms-xa-adp.rar there is a ra.xml and a weblogic-ra.xml.
>> >> Within the
>> >>> ra.xml deployment descriptor there are config-properties for ConnectionURL,
>> >>InitialContextFactory,
>> >>> ConnectionFactoryJNDI, and DestinationType. If my MQSeries Queue
>> >is
>> >>the source
>> >>> jms destination bridge and my weblogic queue is the target jms
>destination
>> >>bridge,
>> >>> what values do I set for the listed config-properties? I can't
>seem
>> >>to find any
>> >>> documentation on what these values should be. Am I missing something?
>> >> Do these
>> >>> values even have to be set?
>> >>>
>> >>
>> >>You DON'T have to do anything to the adapter deployment descriptor
>> >>files.
>> >>The values given there for the listed config-properties are just
>default
>> >>values.
>> >>The values configured in JMSBridgeDestination instances are the values
>> >>used to
>> >>override the default values in the dd file.
>> >>
>> >>> 2. When I go to install a Weblogic instance to a different physical
>> >>machine what
>> >>> has to be installed in terms of MQSeries? So I'll have MQSeries
>on
>> >>physical machineA
>> >>> and Weblogic on a different physical machineB. I want machineA
>to
>> >>forward all
>> >>> messages placed on a MQSeries Queue to forward them to machineB
>where
>> >>the weblogic
>> >>> Queue resides. Does machineB also have to contain an MQSeries
>installation?
>> >>> Or can I just grab the necessary libraries and jar files and place
>> >>them on the
>> >>> Weblogic machineB so they can be included?
>> >>>
>> >>
>> >>You don't have to install MQSeries on the machine that the WebLogic
>> >>server is running. You need the necessary libraries and jar files
>> >>though.
>> >>
>> >>> 3. Is it correct that if I distribute Weblogic onto one physical
>server
>> >>and MQSeries
>> >>> onto a different physical server that I cannot use Exactly-once
>quality
>> >>of service?
>> >>>
>> >>
>> >>That is correct and it is a MQSeries transaction limitation.
>> >>
>> >>> Other notes:
>> >>> 1. I have the following patches installed for Weblogic 6.1 sp3:
>> >>> CR081404_610sp3.jar
>> >>> CR081511_61sp3.jar
>> >>>
>> >>
>> >>What version of CR081511_61sp3.jar you have? You need the one dated
>> >on
>> >>8/13/2002.
>> >>
>> >>> 2. Here is the commands I used to create my ConnectionFactory
>and
>> >>Queue within
>> >>> MQSeries:
>> >>> def xaqcf(MQTestConnectionFactory) qmanager(QM_jeff)
>> >>> def q(MQTestQueue) qmanager(QM_jeff) queue(default)
>> >>>
>> >>
>> >>The only possible error I see here is that you create a xaqcf while
>> >your
>> >>bridge
>> >>is configured to have "Atmost-once" QOS. The bridge adapter will
>create
>> >>XASession
>> >>if the connection factory is xa because it knows nothing about QOS
>of
>> >>the bridge.
>> >>As I said, there is a limitation in MQSeries transactions, which
>prevent
>> >>the
>> >>transaction to happen between remote servers. Although the bridge
>does
>> >>not
>> >>start the the transaction in your case, but MQSeries xa connection
>> >>factory may
>> >>throw error when it detects the other side is remote. Having said
>that,
>> >>I am not
>> >>completely sure this is the problem caused the bridge to fail. I
>suggest
>> >>you use
>> >>a non-xa connection factory on the MQSeries side and see if the problem
>> >>goes away.
>> >>
>> >>> Okay...here is my error:
>> >>>
>> >>> <21-Aug-02 11:08:34 ADT AM> <Error> <MessagingBridge> <Error occurred
>> >>in bridge
>> >>> "Messaging Bridge" during transferring messages (java.lang.Exception:
>> >>java.lang.
>> >>> reflect.UndeclaredThrowableException: java.lang.reflect.InvocationTargetException:
>> >>> javax.resource.ResourceException: Error creating consumer or receiving
>> >>message
>> >>> at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1086)
>> >>> at weblogic.jms.adapter.JMSBaseConnection.receiveInternal(JMSBaseConnection.java:774)
>> >>> at weblogic.jms.adapter.JMSBaseConnection.receiveCommon(JMSBaseConnection.java:656)
>> >>> at weblogic.jms.adapter.JMSBaseConnection.receive(JMSBaseConnection.java:811)
>> >>> at weblogic.jms.adapter.JMSConnectionHandle.receive(JMSConnectionHandle.java:111)
>> >>> at java.lang.reflect.Method.invoke(Native Method)
>> >>> at weblogic.connector.common.internal.ConnectionWrapper.invoke(ConnectionWrapper.java:60)
>> >>> at $Proxy82.receive(Unknown Source)
>> >>> at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1215)
>> >>> at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:854)
>> >>> at weblogic.jms.bridge.internal.MessagingBridge.execute(MessagingBridge.
>> >>>
>> >>
>> >>The latest patch CR081511_61sp3.jar (dated on 8/13/2002) will expose
>> >>more error
>> >>information.
>> >>
>> >>> Has anyone see this error before? Here is part of my ra.xml file....I
>> >>just put
>> >>> these entries in to see what happens:
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>ConnectionURL</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property value>file:/C:/Develop/app_servers/WebSphere/MQSeries</config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>InitialContextFactory</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value>com.sun.jndi.fscontext.RefFSContextFactory</config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>ConnectionFactoryJNDI</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value>MQTestConnectionFactory</config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>DestinationJNDI</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value>MQTestQueue</config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>DestinationType</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value></config-property-value>
>> >>> </config-property>
>> >>>
>> >>> <config-property>
>> >>> <config-property-name>AdapterType</config-property-name>
>> >>> <config-property-type>java.lang.String</config-property-type>
>> >>> <config-property-value>XATransaction</config-property-value>
>> >>> </config-property>
>> >>>
>> >>
>> >>As I said earlier, you are not supposed to change the adapter dd
>file.
>> >>
>> >>
>> >>> Here is a snip of my config.xml:
>> >>>
>> >>> <MessagingBridge AsyncEnabled="false" DurabilityEnabled="false"
>> >>> Name="Messaging Bridge" QualityOfService="Atmost-once"
>> >>> SourceDestination="Source JMS Bridge Destination"
>> >>> TargetDestination="Target JMS Bridge Destination" Targets="myserver"/>
>> >>> <JMSBridgeDestination
>> >>> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
>> >>> ConnectionFactoryJNDIName="MQTestConnectionFactory"
>> >>> ConnectionURL="file:/C:/Develop/app_servers/WebSphere/MQSeries"
>> >>> DestinationJNDIName="MQTestQueue" InitialContextFactory="com.sun.jndi.fscontext.RefFSContextFactory"
>> >>> Name="Source JMS Bridge Destination"/>
>> >>>
>> >>> <JMSBridgeDestination
>> >>> AdapterJNDIName="eis.jms.WLSConnectionFactoryJNDIXA"
>> >>> ConnectionFactoryJNDIName="imagictv.platform.ToolkitRequestCF"
>> >>> ConnectionURL="t3://localhost:7001"
>> >>> DestinationJNDIName="imagictv.platform.ToolkitRequestQueue"
>> >>> InitialContextFactory="weblogic.jndi.WLInitialContextFactory"
>Name="Target
>> >>> JMS Bridge Destination"/>
>> >>>
>> >>
>> >>Your configuration of the bridge and bridge destinations look fine.
>> >
>> >>The last thing is that you have to put MQSeries stuff in your CLASSPATH
>> >>and PATH for starting the WebLogic server that the bridge is running
>> >>on.
>> >>
>> >>You can also turn on debug for more information.
>> >>-Dweblogic.Debug.DebugMessagingBridgeStartup=true
>> >>-Dweblogic.Debug.DebugMessagingBridgeRuntime=true
>> >>
>> >>
>> >>Thanks,
>> >>Dongbo
>> >
-
Calendar Sharing between 2 organisation Exchange 2010 SP3 and Exchange online with Federation Trust.
Hi...
Our company is running Exchange Server 2010 SP3 Standart would like to have Shared calendar with organisation running with Exchange online.
We made a Federation trust between organisations and I checked that one certificate was installed and the rule for their domain was created. but when I try to share my calendar I always receive.
"Calendar sharing is not available with the following contacts because of permission settings on your network."
Name I took from GAL or input manually and always same. Forgot to mention that we migrated from Exchange 2003 to 2010 SP3 and all old exchange servers I removed. I tried everything that I know and read and nothing helped.
Hope for your support.
Thank you.1)I deleted everything and made step by step as indicated in your articles.
2) recreated organisation relationship:
RunspaceId : xxxxxxxxxx
DomainNames : {xxxxxxx.microsoftonline.com, xxxxxxxxx.onmicrosoft.com, xxxxxxx.com}
FreeBusyAccessEnabled : True
FreeBusyAccessLevel : LimitedDetails
FreeBusyAccessScope :
MailboxMoveEnabled : False
DeliveryReportEnabled : False
MailTipsAccessEnabled : False
MailTipsAccessLevel : None
MailTipsAccessScope :
TargetApplicationUri : outlook.com
TargetSharingEpr :
TargetOwaURL :
TargetAutodiscoverEpr : https://pod12312.outlook.com/autodiscover/autodiscover.svc/WSSecurity
OrganizationContact :
Enabled : True
ArchiveAccessEnabled : False
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
Name : xxx
DistinguishedName : CN=xxx,CN=Federation,CN=uxx,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=uxxx,DC=com
Identity : Lxx
Guid : a8xxx
ObjectCategory : upxxs.com/Configuration/Schema/ms-Exch-Fed-Sharing-Relationship
ObjectClass : {top, msExchFedSharingRelationship}
WhenChanged : 27/01/2015 3:23:47 PM
WhenCreated : 26/01/2015 9:41:39 AM
WhenChangedUTC : 27/01/2015 8:23:47 PM
WhenCreatedUTC : 26/01/2015 2:41:39 PM
OrganizationId :
OriginatingServer : xxx.upxxxns.com
IsValid : True
3. Configured Sharing Policies:
[PS] C:\Windows\system32>Get-SharingPolicy
Name Domains Enabled Default
Default Sharing Policy {*:CalendarSharingFreeBusySimple} True False
Lxxx {lxxx.com:CalendarSharingFreeBusy... True True
added my mail box to sharing policy but in the end receive same error
Calendar sharing is not available with the following contacts because of permission settings on your network.
In EventViewer everything seems to be fine....
No errors on policy creation... How can be checked this permission
settings on your network they are on exchange on in DC ? -
X60s upgrades to XP SP3 and only connects to WEP WiFi Networks
Hi,
I have an X60s that upgraded to Windows XP SP3 and now the X60s can only connect to WEP Wifi Networks.
If I try to connect to an WPA2 or WPA network it keeps trying to optain an IP address and then it stops with
that red X on top of the NIC icon
Is there a new driver of hotfix from Lenovo in this case?
Many thanks
OliverHi,
I have an X60s that upgraded to Windows XP SP3 and now the X60s can only connect to WEP Wifi Networks.
If I try to connect to an WPA2 or WPA network it keeps trying to optain an IP address and then it stops with
that red X on top of the NIC icon
Is there a new driver of hotfix from Lenovo in this case?
Many thanks
Oliver -
Exchange 2010 SP3 and UR6 Query - Order of Install
hi,
I need to update my Exchange 2010 SP2 Servers to SP3 and Update Rollup 6.
Can someone confirm the update order for me?
I have 5 servers;
Live Data Centre:
2 x HUB / CAB (Using Windows NLB)
2 x Mailbox (DAG)
Disaster Recovery:
1 x Multi-Role Server (CAS / HUB and Mailbox) - this is also Part of the DAG
Two Questions:
1.) What is the Order in which I install SP3 on these Servers? Should it be Live Data Centre: HUB / CAS, Mailbox Servers and THEN the Multi-Role Server at DR?
2.) When Upgrading each server, should I do SP3, reboot, check and THEN install Update Rollup 6 - or should I upgrade all Servers to SP3 and then start the process again to get to Update Rollup 6?
Thanks in advance for your help with this query.
Regards,
Adam1) Internet facing CAS first in each AD site. Order: CAS> HUB> UM> MBX
2) Personally, I would install SP3, reboot, then install SP6, but its really up to you.
http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Cannot connect to OWA after Exchange 2007 SP3 and Rollup 13 install.
Hi,
Our OWA website isn't accessible after we installed SP3 and rollup update 13 for Exchange 2007. When we attempt to visit the OWA URL, all we receive is HTTP 403.4 SSL is required to view this resource. DougHi,
I recommend you follow the steps below for troubleshooting:
1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your
https://URL), check "Only redirect" box and Status code Found 302.
4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
What's more, here is a thread for your reference.
Exchange 2007 SP3 Rollup 2 installed - OWA stopped working
http://social.technet.microsoft.com/Forums/en-US/8481eb3d-a6ab-42fc-b7ea-fa9a9a625e48/exchange-2007-sp3-rollup-2-installed-owa-stopped-working?forum=exchangesvrdeploylegacy
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Uninstalling EP6 sp3 and WAS6.40
Dear Readers,
Can anyone let me know the steps I need to follow to uninstall EP6 SP3 and SAP Was6.40 on windows 2003 server. I could not find an uninstaller.exe in C:\Program Files\sapinst_instdir.
Your help will be appreciated.
Thanks,
regards,
PayalPayal,
There is UNINSTSAP.exe under the J2EE directory( e.g.: E:\usr\sap\J2E\JC02\UNINSTSAP.exe )
Regards,
Marek -
Crystal Report 2008 SP3 and BO XI 3.1 conflict
Hi every body,
We have a BOE system:
BO XI 3.1
Oracle db 10g
All running successful and can create some types of WebI report.
But we also want reports with Crystal Report.
1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
We set rights for Oracle DB user again. But still error: cannot fetching.
4> We searched the solution for this problem on the internet. But not worked, no answer.
Can somebody help me bring back the BOE system state again ? pls :"<
T______THi Paul,
I hope I read your question right!
Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
Regards
Rim Geurts -
JAX-WS Client throws NULL Pointer Exception in NW 7.1 SP3 and higher
All,
My JAX-WS client is throwing an exception when attempting to create a client to connect to the calculation service. The exception is coming out of the core JAX-WS classes that are part of NetWeaver. (see exception below)
Caused by: java.lang.NullPointerException
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatchContextExistingPort(SAPServiceDelegate.java:440)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatchContext(SAPServiceDelegate.java:475)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatch(SAPServiceDelegate.java:492)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatch(SAPServiceDelegate.java:484)
at javax.xml.ws.Service.createDispatch(Service.java:166)
I have done some research and it appears that as of NetWeaver 7.1 SP3 SAP stopped using the SUN JAX-WS runtime and implemented their own SAP JAX-WS runtime. I also took the time to decompile the jar file that contained the SAPServiceDelegate class which is throwing the null pointer exception. (see method from SAPServiceDelegate below)
private ClientConfigurationContext createDispatchContextExistingPort(QName portName, JAXBContext jaxbContext)
BindingData bindingData;
InterfaceMapping interfaceMap;
InterfaceData interfaceData;
bindingData = clientServiceCtx.getServiceData().getBindingData(portName);
if(bindingData == null)
throw new WebServiceException((new StringBuilder()).append("Binding data '").append(portName.toString()).append("' is missing!").toString());
QName bindingQName = new QName(bindingData.getBindingNamespace(), bindingData.getBindingName());
interfaceMap = getInterfaceMapping(bindingQName, clientServiceCtx);
interfaceData = getInterfaceData(interfaceMap.getPortType());
ClientConfigurationContext result = DynamicServiceImpl.createClientConfiguration(bindingData, interfaceData, interfaceMap, null, jaxbContext, getClass().getClassLoader(), clientServiceCtx, new SOAPTransportBinding(), false, 1);
return result;
WebserviceClientException x;
x;
throw new WebServiceException(x);
The exception is being throw on the line where the interfaceMap.getPortType() is being passed into the getInterfaceData method. I checked the getInterfaceMapping method which returns the interfaceMap (line above the line throwing the exception). This method returns NULL if an interface cannot be found. (see getInterfaceMapping method below)
public static InterfaceMapping getInterfaceMapping(QName bindingQName, ClientServiceContext context)
InterfaceMapping interfaces[] = context.getMappingRules().getInterface();
for(int i = 0; i < interfaces.length; i++)
if(bindingQName.equals(interfaces<i>.getBindingQName()))
return interfaces<i>;
return null;
What appears to be happening is that the getInterfaceMapping method returns NULL then the next line in the createDispatchContextExistingPort method attempts to call the getPortType() method on a NULL and throws the Null Pointer Exception.
I have included the code we use to create a client below. It works fine on all the platforms we support with the exception of NetWeaver 7.1 SP3 and higher (I already checked SP5 as well)
//Create URL for service WSDL
URL serviceURL = new URL(null, wsEndpointWSDL);
//create service qname
QName serviceQName = new QName(targetNamespace, "WSService");
//create port qname
QName portQName = new QName(targetNamespace, "WSPortName");
//create service
Service service = Service.create(serviceURL, serviceQName);
//create dispatch on port
serviceDispatch = service.createDispatch(portQName, Source.class, Service.Mode.PAYLOAD);
What do I need to change in order to create a JAX-WS dispatch client on top of the SAP JAX-WS runtime?Hi Guys,
I am getting the same error. Any resolution or updates on this.
Were you able to fix this error.
Thanks,
Yomesh -
Hi There
My BO is BO XI 3.1 SP3, and excel is 2010, my webi report has over 65523 rows, but I found in the excel, it will split into two tabs, it does not use excel 2010 feature
does any one know the reason?
thanksExcel 2010 is not suportive by BO XI 3.. It is possible in BO XI 4.0. You can try What Gowtam Allu said, but I am not sure if it works.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4079f8f6-2b49-2d10-d790-bc596012dc25?quicklink=index&overridelayout=true -
My laptop running XP sp3 and FireFox 3.6 died. I salvaged the HD and put it in a drive enclosure. I bought a new Win7 machine and wish to import my old favorites (I don't have a backup, but the Favorites folder on the old HD is intact). I have not been able to determine how to import these favorites from the old HD to the new machine. I haven't found any FAQ that addresses this since I can't really start Firefox on the old HD in order to make a HTML backup. Any ideas? edit
See this: <br />
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Maybe you are looking for
-
I am trying to save a sheet of business cards to pdf format in order to print them off.
I have done it in the past, but now, when I export the file, it shows one card per sheet of paper instead of 10 per shet to fit the stock for business cards. I'm sure it is an easy fix, but it eludes me. Thanks, Pat
-
Can i use an extented usb cable to recharge my ipad ?
Hello ! I just bought iPads for my business. I want to use it with stands and i'm looking for a way to recharge it. I bought a 5m extended usb cable, plugged it and the ipad made a sound like if it was recharging but then, it says, "not charging" ! H
-
I live in Turkey and my father is bying me a Macbook pro from Dubai's airport, and I was wondering if I would still have the same "one year limited warranty" as if I bought it from an apple store in Turkey, and is the one year limited warranty intern
-
I cannot display my desktop on my tv
I am trying to view my laptop screen on my tv. I am using an HDMI cable and a belkin adapter that I bought from apple. The desktop screen appears but my icons do not. I am trying to watch a video from my laptop onto my tv.
-
Simple coding question: Adding variable to a string
I can't figure out what the syntax is for this in Actionscript. Basically, I have a variable I want to add into a string that will call a certain frame based on user's language selection. So... var currentPage:int; <<this updates dynamically when nex