Windows XP and Windows 7 cannot see my WRT610N USB Drive

I have the WRT610N V2 router with current firmware. I have tried a thumb drive and an IOMEGA 1tb drive. In both cases the router sees the drive, allows me to create partitions, groups, and users but the computers in my home cannot see the drive. I tried the Network wizard and explorer drive map option. I even tried start/run typing wrt610n or \\wrt610n and I get network path cannot be found. I have three computers in the house, one (XP) with Norton 360, one (XP) with SOFOS and one with no AV sw at all (Win7). None of these can see the network path.
What am I missing?
Thanks
Dan

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Similar Messages

My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on.

My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on. I have the little arrow that normally selects my AppleTV in iTunes but AppleTV is no longer listed (only My Computer). Is there an issue with the latest update. This is probably my fault by telling everyone how good AppleTV is and that it just works! Doesn't work any more :-( I have tried all the usual restarting of AppleTV and PCs. I'm having to revert back to the Samsung Blu-ray player's PC sharing :-(

Restarted router(s) and it works again.

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

Controller for View, Window, Interface, and Configuration Cannot Be Created

Hi All,
In our Web Dynpro ABAP applicaton we have a window and when we edit the conent of window and try to press "Cancel" button we are getting below error.
Controller for View, Window, Interface, and Configuration Cannot Be Created
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: GET_ACTION_FROM_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================
Do any one have idea regarding this error.
Regards
CB

Hi,
Sounds bit strange to me, if you edit your window and do not want to save your changes then i would not expect this error. assuming that the component does not have activation problem.
Just for making sure.
I assume that your problem is on design time and not runtime.
If it is a design time and problem still exists, try to delete this window, save ,activate and then recreate this window,embed your view(s).
If it is runtime problem then i would suggest you to do debugging and find out where it is getting this error.

I am trying to startup InDesign but a window opens and reads, cannot load BNCORE.RPLN plugin. It requires 10.2 version of Indesign. Need compatible version of BNCORE.RPLN. What do I do at this point

I am trying to startup InDesign but a window opens and reads, cannot load BNCORE.RPLN plugin. It requires 10.2 version of Indesign. Need compatible version of BNCORE.RPLN. What do I do at this point

reinstall ID. The update was not successful.

I have a touchsmart running windows 7 and i cannot get my screen saver to work

i have a touchsmart running windows 7 and i cannot get my screen saver to work

Hello. You need to change the energy use setting that computer uses max it out. Then it will work just fine. My is touchsmart 600-1050. The computer was preset to use minimum amount of electricity when in idle. I changed all the setting to high. Now every thing runs just like a Windows XP version computer. Thats how I got my screen savors to work. I also upgraded my Windows 7 to Windows 7 Ultimate now I am able to run a lot more XP software. Test your pond screen saver make sure that working with windows open. That will tell you if it is a software issue if it doesn't work. That is the case then restore it from your D: drive.

Thumbnails not working in windows 7 and windows 7 RC

When I used to view my security camera video card in Vista I would get a thumbnail view of each 10 second video produced.. This made it easy to skip through each video produced and pick out the ones that I thought would be best to check. This would be watched after about a week or so of videos. Now in Windows 7 and windows 7 RC I cannot seem to find this thumbnail view. All I can see is the media player film type .AVI icon for each video. Is there any way of turning the thumbnail function back on. I have tried all the registry fix changes that have been suggested and they don't work. I have downloaded different codec programs and they don't work. The icon/thumbnail box is unchecked in folder views and that doesn't work. Is there an answer to my problem. Does any one know if Microsoft are working on a change to get thumbnails to work with .AVI files. Hope you can help.

Hi guys,
I found a solution for this issue on windows 7 64 bits !
I'm on the 7100 I couldn't get thumbnail preview for my .MOV or .mp4 files. Sometime I could get one or 2 thumb out of 30 in the folder.
I changed and added a few key to the registry to fix this preview thing:
IN REGEDIT:
_ HKEY_CLASSES_ROOT\.mov\shellex\
where I only had 2 key inside the shellex.
_I looked inside the mpeg shellex ( because mpeg would generate good thumbnails:
HKEY_CLASSES_ROOT\.mov\shellex\
where it had 3 keys
_SO what I tried was to copy those 3 key and replace my .mov shellex 3 key with those.
this is what you can do:
-open regedit
-right click on: HKEY_CLASSES_ROOT\.mov\shellex\
then export it ( it will be your backup in case it doesn't work or you mess up something you will just have to click on it to instal it again.
Then,
- remove the "HKEY_CLASSES_ROOT\.mov\shellex\ "KEY
-open notepad
-paste the following in your notepad file:
-----------------------don't paste this line-------------------------
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.mov\shellex]
[HKEY_CLASSES_ROOT\.mov\shellex\{3D1975AF-0FC3-463d-8965-4DC6B5A840F4}]
@=""
[HKEY_CLASSES_ROOT\.mov\shellex\{BB2E617C-0920-11d1-9A0B-00C04FC2D6C1}]
@="{c5a40261-cd64-4ccf-84cb-c394da41d590}"
[HKEY_CLASSES_ROOT\.mov\shellex\{E357FCCD-A995-4576-B01F-234630154E96}]
@="{9DBD2C50-62AD-11D0-B806-00C04FD706EC}"
-----------------------don't paste this line-------------------------
-save it under whatevername.reg ( be sure to use "all file" kind of type file.)
-double click on the reg file you just saves you just saved , it will reinstal the shellex inside the .mov key here:
HKEY_CLASSES_ROOT\.mov
with the right keys and stuff.
-close regedit
-open a folder containing your .MOV, refresh the files several times to be sure, it should be working.

I have disabled all Kaspersky security, windows firewall and windows defender and Itunes still will not update my Ipod touch 4th gen to IOS 5, Helppppp!

I can't get the IOS 5 to work for windows Vista. I'm running kaspersky pure 2.0, windows firewall and windows defender. I have turned them all off, I then attach my Ipod 4th gen and I get the "cannot connect to itunes update server". I ran diagnostics in itunes and it tells me I dont have a internet connection. I'm on the internet right now, and I DO have a internet connection, but it tells me Itunes says otherwise. I'm able to send this message on the same pc with internet connection but keep running into this error. I have now read discussiong boards through apple and disabled all my firewalls, still no luck. I was able to update the lates version of itunes, and just waiting to get my ipod updated now, please help me.

On the computer you should be able to go to the network properites. Go to the TCP part and unchec the line that says obtaind DNS automatically and check the one that says use the following. Add the 8.8.8.8 and Google other 8.8.4.4.
For more info see:
https://developers.google.com/speed/public-dns/

Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.

There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client
I have searched for possible resolutions including:-
Turning off the Cache for the share
Disabling the network adapter power setting to allow windows to put the device to sleep.
Disabling Antivirus/configuring it to ignore folders for on access scanning
Disabling SMB Signing
Configuring the clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache
Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
connections
The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.
I have looked at
http://support.microsoft.com/kb/2696547/en-us
I have disabled SMB2&3 on the server as that is very straight forward.
When I get to the section about disabling SMB2 on the client the command fails.
sc config
lanmanworkstation depend= bowser/mrxsmb10/nsi
  After running the above command, it returns an error:
      [SC] ChangeServiceConfig FAILED 1059:
      Circular Service Dependency was specified.
So it's not worth running the following command:
sc config mrxsmb20 start= disabled
I have tried the command on Windows Vista, Windows 7 and Windows 10 just to confirm that it's nothing to do with any particular PC, machines in Domains and Non-Domain machines.
So, my questions are:-
1, is
http://support.microsoft.com/kb/2696547/en-us actually correct and up to date and for the OSes (Vista, 7, 8, 8.1, 2012 server and Windows 10) with latest updates & service packs?
2, How do I disable SMB2 and SMB3 on clients for troubleshooting purposes the server to resolve problems with shared files (multi user access)
3, If I just disable SMB2 & 3 from the server would that force the clients not to use SMB2 when communicating with the server and therefore not caching the directory structure and file not found etc? I have seen posts that suggest this is not the case.
4. Does sc.exe have a bug in it?
Thanks in advance
Rob

Hi,
I made a test in our testing enviroment, everything works fine to disable SMB2 and 3. For your problem, in my opinion, as I didn't find any specific report about this error, it would be better to use Process Monitor to capture the trace when running the
command.
Start Process Monitor, then set the filter as cmd.exe, after that, open CMD and execute the command.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
In addition, I found another thread that had similar error with yours, you can take its solution as reference.
https://social.technet.microsoft.com/Forums/windows/en-US/506828c8-e7af-4039-aca7-43321939bb55/offline-files-synchronization-error-the-file-specified-cannot-be-found?forum=w7itpronetworking
Roger Lu
TechNet Community Support
Roger,
Many thanks for the time taken to look into this.
I've downloaded process monitor and loaded it. I filtered for cmd.exe started capture and saved a 1mb file.
However I don't think this is going to help unless you can point me in the direction of what you're expecting to see in the capture file? If you want me to send you it I can but it does contain personal information which I'd rather not place online.
You can recreate the problem yourself by doing the following:
Go to modern.ie
Download any windows 7 virtual machine for your preferred of virtualisation platform
log in, start cmd as administrator and run the command
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
You will also receive the same error.
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
You can also try it on the Windows 8 and 8.1 machine if you have time.
I checked the link to the similar error and that just looks at the file not found problem which is the smb2 cache. They still didn't resolve the slow access to the share which is seen on a machine that has anti-virus on it when you go to right click
on the folder or a file in the folder. It's about a 20 second (spinning circle) pause every time. The problem is bigger than that. If you have shared files on the network share that are used by multiple people at the same time, say a spreadsheet or database
file windows is loosing the connection to that file so the user cannot write to it even if they have the file open. The smb2 caching shouldn't cause that problem.
It appears that I have to disable from SMB2 and SMB3 and ensure that the clients only use SMB1.
If SMB2 & SMB3 are disabled from the lanmanworkstation service the clients will not do any caching even if the server has disabled the share cache (offline files for that share).
The problem with the "Circular reference" error message is standard across all versions of windows that have "smb2" or "smb2 and smb3". Can you recreate that problem? Or is it working on your windows computer and on the machines
downloaded from modern.ie ?
My testing has shown that the command "sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi" does not work. Therefore that's the one I want to resolve first. By resolving that I may be able to get the clients accessing the share to behave
themselves and use the shared files correctly as they always did from Windows 95/NT4 through to Windows XP and 2003/2008 server.
I'm unable to recreate the problem with multiple users having access to shared database files on windows 2012 server from Windows 7 clients were the access to the files drops once a day or once every couple of days.
Kindest Regards
Robert

Windows Mobile Device Center fails to open on Windows Vista and Windows 7 machines

Hello,
Our domain based machines cannot open Windows Mobile Device Center (Windows 7 and Windows Vista). You click the application and nothing happens. There are no errors in the Event Viewer that relate. In Task Manager I do NOt see any processes that look related
to Windows Mobile Device Center. Our Group Policy Objects are very lean and limited, and we do not have any policies that specify how Windows Mobile Device Center should behave. The only GPO that I could think would interfere with this is to prevent malware
and viruses, we have disabled Autoplay on removable devices.
Any assistance would be greatly appreciated.
thanks!

Hello,
Our domain based machines cannot open Windows Mobile Device Center (Windows 7 and Windows Vista). You click the application and nothing happens. There are no errors in the Event Viewer that relate. In Task Manager I do NOt see any processes that look related
to Windows Mobile Device Center. Our Group Policy Objects are very lean and limited, and we do not have any policies that specify how Windows Mobile Device Center should behave. The only GPO that I could think would interfere with this is to prevent malware
and viruses, we have disabled Autoplay on removable devices.
Any assistance would be greatly appreciated.
thanks!
I too am experiencing this issue, as well as an unrelated machine that is not on our domain that is having exactly the same problem.
Any thoughts?

Firefox highlights search boxes in light blue and I cannot see what I'm typing. How do I fix this?

Recently firefox started highlighting the background color in search boxes/fields (ie. google) in a light blue color and I cannot see what I'm typing in the field. Please help.
Thanks.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*[[/questions/870165]]

Connecting iPad to Windows7 and I cannot see see videos or photos on the device using explorer

I have connected iPad3 running iOS 6.1.4 to a PC running Windows 7. I cannot see by using windows explorer any photos or videos on the iPad device.
Also AutoPlay provides me with a message that it has nothing to import. Would someone be able to help. Thank you.

If you imported the photos and videos using iTunes, then you cannot see them with Windows Explorer.

Music don't upload to Icloud and I cannot see it on my devices

Hello Guys,
I'm having some troubles trying to puto new folders on Icloud, all the time I put my music on itunes pc, match it with icloud and after that I can see all music on my devices, two days ago I tried as ever the same uploading 2 new music folders but the don't match with my cloud and I cannot see it on my Iphone or Apple TV, I tried convert to AAC, Push Upload to Icloud using right mouse button option on CD folder, Put songs into itunes folder standard, disable Itunes Match and enable it again on itunes PC, on my iphone I tried the same, put off itunes match mode, and icloud too, and nothing happend, the thing is the music CD is on apple store to so I believe even it's not necessary to upload file just only match it but nothing happend.
Please if any had ever the same error or believe something maybe it's wrong, I will be greatfull with some help.
Best Regards,
Martin,

In iTunes click on View in menu bar.
Select Show sidebar.
You will get a traditional iTunes view window with the side bar listing similar to an explorer window.
At the top of the main window you will see a button called Rented
Click on that and you will find your purchase ready to play.

Problem dual booting Windows 8 and windows 7 G480

I bought new laptop g480 and it comes with windows 8 single language and I want to dual boot it with windows 7 Ultimate. So I create one partition 50 Gig using Minitool Partition Wizard, after that I boot into USB device ( I've bootable Windows 7 USB and already disable secure boot in BIOS). The process went fine until it ask me where to install the windows, so I choose the partition 50 Gig I created before but I get this message "Windows cannot be installed to this disk of the GPT partition style". Help me guys how to solve this problem, I've searched solution for this but non of them seems working for me. Step by step will be good for me. I hope to get quick reply for this because I've this problem since 2 days ago and never get solution .
Thank you.
Solved!
Go to Solution.

Hi @CharlyAR
I tried your solution before I posted the message here but it didn't work but then I give it try again and I manage to install the Windows 7 ultimate. Now my pc dual boot with windows 7 and windows 8 (windows 8 is the main OS).
p.s. This is important guys, if u want to make windows 7 bootable USB by following the tutorial on youtube it wont work if you pc/laptops is pure GPT (UEFI) because most of them using MBR to make the tutorial thats why it look easy and works for them, it's almost same but there's "add-on" with GPT mode. You have to make the windows 7 bootable USB in GPT (UEFI) mode or it wont let you install. I couldn't find tutorial for this GPT mode on youtube.
All I do is search my old DVD-RW and erase it and I follow the tutorial here, same what @CharlyAR told me
http://www.youtube.com/watch?v=z7rRsQGew28

SCUP - Deploy Updates for both Windows 7 and Windows 8.1 rules Detection

Hi all,
I encounter a little issue regarding the update deployment from SCUP.
For example, I would like to deploy Firefox updates on both Windows 7 and Windows 8.1. Firefox Updates are deployed and installed on Windows 7 without any problem. But Nothing happen on Windows 8.1.
I think my problem is on my Installable Rule I have created. As it's not possible to select Windows 8.1 as a condiftion (like Windows 7) I have created a WMI query.
Before using a WMI query, I tried to use Major version and Minor version without success.
Does anyone has already used this sort of scenario ?

Shouldn't you do the following things (see also:
http://technet.microsoft.com/en-us/library/hh134743.aspx):
Add Windows Language is French to the top AND;
Change the second AND to an OR;
Add the WMI Query to the new OR (so it's at the same level as the
Windows Version = Windows 7 SP1);
Remove the last OR (as it's not being used anymore).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Windows XP and Windows 7 cannot see my WRT610N USB Drive

Similar Messages

Maybe you are looking for