Windows XP and Windows 7 dual boot (unable to create partition)
Hello, 3 months ago I bought in Bangkok a Lenovo S10-2 with 2 GB Memory (it came with 1 GB) and Thai Keyboard (Thai Keyboard is the American Keyboard with the Thai Alphabet) which works just fine.
I'd like to install Windows 7 in a new partition and a dual boot with the existing Windows XP. The problem is that It's not possible to create a partition on the C: disk. I've been trying with EASEUS Partition Master, Partition Manager 10 Express and none of them let me do it, only Resizing/Moving the existing partition is an option.
Hard disk looks as follows:
C: Type: NTFS | Size 103.91 GB | Used: 29.49 GB | Unusued: 79.42 GB | Status: System | Pri/Log: Primary
D: (Lenovo) Type: NTFS | Size 30.38 GB | Used: 1.44 GB | Unusued: 28.95 GB | Status: None| Pri/Log: Logical
*: (Hidden) Type: NTFS | Size 14.75 GB | Used: 4.88 GB | Unusued: 9.87 GB | Status: None| Pri/Log: Primary
After search the forums I didn't find a solution.
I've read elsewhere that Windows des not allow more than 3 partitions. Is there a safe way to partition the C: volume which has Windows XP and Install Windows Seven along with it?
Thanks in advance,
George
Solved!
Go to Solution.
Hi,
be sure that you backup your system.... partitioning and resizing is always on risk...
be sure that you can restore if something goes wrong...
if you dont know what happens ... dont do this...
first you can have 3 active (primary & 1 logical ..
as i have for example 1.XP,2. Win7,3. Ubuntu...and 4. Logical (for common data like music,video,textfiles,picture and...)
or 4 active primary...(..)
...hope that you knows easeus partitionmanager a bit ...
...lets have a look :
so you have ... partition c: (XP) ..... ca. 70 GB .... thats enough room for windows 7...(prefer 30GB workspace)
start in windows ... start easeus PM .. click on drive c: (XP) and resize to ... GB leave 30 GB black space behind..(for W7)..
go on this empty space create new primary NTFS partition ... and after that , right click on new primary drive set active !!!! .... click apply button and cross fingers
... system will restart and easeus will manage all your changes takes time...
after restart... prepared for booting windows 7 install and if windows asking you , take the second partition on your harddrive (30 GB)..... and ....so on...
thats the way to go ...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1
Similar Messages
-
Windows 7 and Arch linux dual boot problem
hey guys I had an issue with windows 7 dual booted with arch and i was just wondering my windows 7 crashed. I had Reinstalled windows OS and all my partitions are set up but now when I try to boot up arch I cant at all cause windows Boot took over and i have no way of getting into arch is there anyway i can fix this or maybe reinstall arch without loseing my home folder with all my data, or is there just and easyer way to fix this issue im stuck. thank you all for your support as i am a noob
You need to re-install grub. When you reinstalled Windows it will overwrite grub preventing you booting Arch. You'll need to boot from a liveCD and chroot into your Arch installation. details for recovering grub are in the wiki - https://wiki.archlinux.org/index.php/GR … stallation
-
Error With Ubuntu and windows 8 dual boot
I have a levovo x240 and I had Ubuntu and windows 8 dual booted I removed the Ubuntu partition in windows partition modifier and when I restarted my computer it launch "grub rescue> "
How do I boot into windows and stop this problemYes, instead of posting in a forum dedicated to type, post in a forum associated with Premiere.
I will move your post for you.
- Dov -
I cannot backup my Windows 7 (dual-boot) image to my external HD (formated as Mac OS Extended). I installed MacDrive 8.0 hoping to solve the problem but Windows 7 gives me an error when I try to create a backup: "...drive is not formatted as NTFS, cannot use as backup...".
I also tried making an Image of the Windows 7 partition through Disk Utility but was not allowed to do so.
I am not sure where else to go from here. I need to keep my external hard drive formatted as Mac OS Extended but I also need to backup my Windows 7 partition. I only have the single external at the moment. Is there a way to backup my Windows 7 partition?
ThanksWinclone will backup your Windows partition to a Mac formatted drive.
Just search for Winclone on this forum and on Goggle. -
Help: Dual Boot Vista/XP (multiple partitions) with Rescue and Recovery?
So I re-installed my Thinkpad and want to dual boot Windows XP and Vista Ultimate on separate partitions. I'm using the Windows XP pre-load and a separately licensed Vista Ultimate.
I first installed XP preload and did a backup with RnR. Then I'm installing Vista Ultimate by shrinking the XP partition and creating a new partition for Vista. I plan to use RnR in XP to do another backup from the base and hoping it will backup Vista as well. Will RnR backup both the Vista and XP partition correctly so that when I recovery in the future, it will restore both?
I don't want to blow it and have to redo the whole thing. Help would be much appreciated!
edit: This didn't work, as RnR only allows you to backup as many as partitions as your base image had....
Message Edited by leesiulung on 01-21-2009 08:25 PMhi
you say that you have a vista Ultimate did you try making a windows image from the back up and recovery in vista? in that way both of your xp and vista can be save to an hdd or a set of DVD'S(as a back up image)
else try using acronis true image it should work out ...good luck!
Message Edited by samavedam_vijay on 01-22-2009 11:05 AM
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer ) -
windows 8 installation gets stuck during create partition step in bootcamp. I tried to restart the bootcamp with same results. I have given it more than 6 hrs for last 3 times but I was able to go past this step previously where I got stuck during registering windows8.
Hi,
According to your description, it seems that your all Windows 8.1 computers connect to network via normal wireless network.
Did you have wireless router for them?
Please delete this adhoc, then check if these computer could connect to network.
If no, follow below guide to create and connect to adhoc :
Create adhoc in Windows 8.1
http://tipsandtricksforum.com/thread-210.html
connect to adhoc with Windows 8.1
http://social.technet.microsoft.com/Forums/windows/en-US/56ff83ff-1f15-4fc1-aa37-6651340d46fa/windows-81-connecting-to-ad-hoc-networks
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support -
[Solved] Windows 7 and Arch Dual boot- unable to boot into Windows7
Had to reformat computer and reinstall windows and Arch on two separate hard drives (Dual boot) .
Windows 7 was the first install on SDA: (/dev/sda1 - system reserved 100mb, /dev/sda2 - 20gb)
Arch on SDB: (/dev/sdb1- boot 94mb, /dev/sdb2- swap, /dev/sdb3 - root, /dev/sdb4 - /home)
Installed grub2 on /dev/sda. now grub bootloader loads Arch fine. Also shows Windows 7 (on /dev/sda1).
But when chosen Windows 7, it does not load and loops back again to boot loader screen.
In BIOS i have set disk drive SDB as first boot option.
If i choose SDA as first boot option in BIOS, same scenario is repeated.
I have gone through mostly all the pages related to the topic but i can not co-relate the solution
to my exact situation due to limited knowledge.
Can somebody pls help me as to how to edit grub.cfg so as to point it to load windows 7?
the entry related to windows 7 reads as follows:-
quote
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menue$
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint$
else
search --no-floppy --fs-uuid --set=root F010D97410D941F0
fi
chainloader +1
unquote
for Arch set root value is hd1,msdos1 and working fine.
Thanks and regards.
Last edited by commsanjay (2012-10-14 08:08:54)This is exactly why I have chosen to use windows MBR and syslinux
https://wiki.archlinux.org/index.php/Wi … oot-loader
Last edited by ackt1c (2012-10-14 02:32:55) -
I have a primary XP profile and associated mailboxes/accounts. I am dual-booting to Windows 7 and want to share only that XP profile so that all of my mail appears (and is synchronized) in the Thunderbird browser regardless of which OS I boot to. This seems as simple as pointing the Win 7 mail account local profile to the original XP profile, but that doesn't work. And - please - don't point this question to the response regarding sharing profiles between windows and Linux. That thread hasn't helped. Thanks in advance
Well I have no idea hat thread your talking about, but regardless the process is always the same, use the profile manager to create a new profile and point the profile manager to the profile you wish to use.
see https://support.mozilla.org/en-US/kb/profiles-tb#w_restoring-a-profile-backup
and
http://kb.mozillazine.org/Moving_your_profile_folder_-_Thunderbird -
Advantages and Disadvantages of Dual booting Windows on PXI Device
Hello,
In solving my previous problem of running a DLL in RTOS I've stumbled upon another solution. But i wanted to know the pros and cons of this before i make the leap.
I want to install windows on the PXI device so that the NHR DLL files are run inherently on the windows kernel and i have access over my DAQ devices without placing them in the remote target.
What are the advantages and disadvantages of installing a windows only on the DAQ device and running all my operation from it. Do i loose my real time features? I dont know, I'm really new to LabView and may sound really dumb. Please excuse my lack of knowledge.
With Regards,
Khalid.
Hello Bob,
Thank you for your insightful answer. I also thought this might happen, loosing all the RT features.
I have another question for you. If i use a RT variant of windows like "Windows Embedded 8", will this make any difference? Can i regain my RT features by it or i have to go with the LabView RTOS.
I'm pushing towards a windows system because i have to run this DLL file from NHR which is not supported by the LabView RTOS.
Moreover, I could just install just windows onto the PXI controller. I'm not being able to make it dual boot. Can you guide me towards proper guideline to do so? I looked at the knowledge base file about dual booting, but the instructions dont exactly match with my available options in BIOS setup.
Any suggestions from anyone is much appreciated.
With Regards,
Khalid.
-
Arch And Windows 7 Dual Boot On Separate HDD
Hi everyone.
Firstly, a big thank you to everyone for helping me out in my first thread regarding choice of partitions and filesystems.
I went on to install Arch today on my second HDD (160GB). My first HDD has Windows 7 installed on it. (The BIOS shows that the HDD with Win 7 installed is HDD1.)
Arch showed the HDDs as sda and sdb. I was installing on sdb and created my partitions accordingly.
sdb1 --> root (15GB)
sdb2 --> swap (1GB)
sdb3 --> var (10GB)
sdb4 --> home (remaining space)
I had to flag sdb1 as Bootable.
Then I was asked about mountpoints and something about selecting by dev or uuid. I didn't quite understand but selected dev. Then formatted with ext4. Did not add any parameters.
Before proceeding they gave a warning about no /boot partition but I continued anyway.
It was an FTP install and went pretty smoothly. I configured everything exactly as I had read in the guides online and Wiki. GRUB said it configured successfully (I did not make any chnges to it). I had put GRUB on sdb and not on any partition.
As I rebooted, my system did not show the GRUB but went straight on to Windows 7. I went into BIOS and changed my first drive to the 160GB Seagate where I had installed Arch and rebooted. This time GRUB came up without any option to boot Windows 7. When I selected Arch it gave an error and did not boot.
So I'm back on Windows 7 and need help. I'm a noob and did not much understand the solution that I saw on another thread. Since I intend to have the 2 OSs on separate drives and dual boot, what should I do?
Will be very grateful for any help.
Last edited by Ritwik7 (2010-06-06 12:01:31)Here you go:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Windows
title Windows
rootnoverify (hd1,0)
makeactive
chainloader +1
# (1) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/mapper/vghparch-lvroot ro quiet
initrd /kernel26.img
# (2) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz26 root=/dev/mapper/vghparch-lvroot ro
initrd /kernel26-fallback.img
I installed grub on the second hdd and configured the bios so this drive comes first in the boot sequence and as pyther pointed out above the drive where grub is loaded from becomes hd0.
Last edited by Ashren (2010-06-07 18:51:29) -
Hi there!
I am in the process of selling my old Windows 7 laptop and I'm very much considering to buy my very first MacBook Pro laptop. Now, I heard that one can install Windows 7 OS as a dual-boot to Mac OS X. Can I ask:
1. Will I need an actually physical Windows 7 disc to install it in my MBP? Is it that easy to install? Roughly how long will it take to install?
2. Will dual-boot mean that it might slowdown the MBP's performance and running?
3. With Windows 7 boot camp will the multi-gesture functionality of Mac OS X be "applicable" in the Windows OS?
Thank you.onslaught wrote:
1. Will I need an actually physical Windows 7 disc to install it in my MBP?
Yes
Is it that easy to install?
Easy for most
Roughly how long will it take to install?
A hour or so.
Will dual-boot mean that it might slowdown the MBP's performance and running?
No, dual boot is chosing one operating system or the other when booting.
With Windows 7 boot camp will the multi-gesture functionality of Mac OS X be "applicable" in the Windows OS?
Not all no, Apple bridges some but not all the gestures are supported in Win 7 or their software.
Read:
Windows in BootCamp or Virtual Machine? -
How do you uninstall Windows 10 Dual Boot?
Hello,
I am running a dual boot installation of Winodws 8.1 and 10 Techical Preview, and I like to know how do you uninstall the Windows 10 from the dual boot scheme? I think I've uninstalled previous beta versions of windows 8 by erasing the partition it
was installed into and that was it. Is this the correct way to remove window 10 too? Just asking, since the graphical version of the OS boot screen is present in this dual boot installation, does that change anything.Hello,
I am running a dual boot installation of Winodws 8.1 and 10 Techical Preview, and I like to know how do you uninstall the Windows 10 from the dual boot scheme? I think I've uninstalled previous beta versions of windows 8 by erasing the partition it
was installed into and that was it. Is this the correct way to remove window 10 too? Just asking, since the graphical version of the OS boot screen is present in this dual boot installation, does that change anything.
Logon to your Win 8.1 > press the Win logo key and R key . You are now at Run window> at the Run box type diskmgmt.msc > OK
You are now at Disk Management window > right click at the partition that house your Win 10 TP > click Delete Volume > the partition is now UNALLOCATED.
At the left of it is your Win 8.1 partition. Yes ?
If yes, right click at Win 8.1 partition > click Extend Volume > click Next > at Select the amount of space in MB, type in the maximum available space shown for the unallocated space in MB > Next > Finish
The space shrunk for Win 10 partition is now back to your Win 8.1 -
Windows XP - Dual Boot for Satellite U300-134
Hi. I have read the other replies to this problem of adding Windows XP (as a dual boot) but it still won't work. My laptop (I bought a few days ago) comes with Vista, and I bought Windows XP Home Edition - OEM. I got the intel matrix storage manager onto a USB floppy drive, but now it gives a message that "The file txtsetup.oem could not be found". I have to have XP because it turns out my work VPN will not run under Vista (I found that out AFTER I bought the computer unfortunately).
Can you please tell me what I need to do next to get this working? And any other surprises I might come across? I have looked round the internet but can't find the answers to this. I tried nlite but haven't managed to get that working yet either.
Thank you.
IanHi
There are different reasons why you cannot install the Win XO on the U300.
First of all do you use the right Intel Matrix Storage manager?
You notebook seems to support the Intel GM965 + Intel ICH8M chipset!!!
Please check this thread!
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26040
User Markus77 has listed the details!
Furthermore please dont format the HDD or create any partitions AFTER installation of the Intel Matrix Storage manager. This would delete the already installed driver. -
Arch & Windows 8 Dual Boot -- Windows Boot Loader loads grub-rescue
Arch works fine,but as it always happens Windows boot went down. Both OS are EFI.
Note that boot secure and fast boot were disabled for Windows 8.
I used os-prober, but did not fix anything; so, I removed it. I tried to hack things out using boot-repair from Ubuntu, but it requires a repository, grub-efi, from Ubuntu that Arch doesn't have.
I am trying to modify files in grub.d and grub.cfg and hopefully fix something.
Exact description:
- archgrub loads and shows 3 entries. Two for Arch that load the sys succesfully and one for Windows 8 that fails.
- When I try to execute Windows from grub, it brings me to a grub rescue>
and shows error /boot/grub/x86_64-efi/normal.mod not found
As far as I am concerned this .mod is from Linux, so I don't know why it is being called into Windows loading procedures.
lsblk returns:
[jav@localhost ~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
|-sda1 8:1 0 1000M 0 part
|-sda2 8:2 0 260M 0 part
|-sda3 8:3 0 1000M 0 part
|-sda4 8:4 0 128M 0 part
|-sda5 8:5 0 605.3G 0 part
|-sda6 8:6 0 5.4G 0 part /boot/efi
|-sda7 8:7 0 25G 0 part
|-sda8 8:8 0 20G 0 part
|-sda9 8:9 0 244.1G 0 part /
`-sda10 8:10 0 29.3G 0 part
sr0 11:0 1 1024M 0 rom
Here's the output of fdisk. Another weird thing is that sometimes ubuntu would show on my terminal. See the first line below, "jav@ubuntu"?!
[jav@ubuntu ~]$ sudo fdisk -l
[sudo] password for jav:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: [i deleted this]
Device Start End Size Type
/dev/sda1 2048 2050047 1000M Windows recovery environment
/dev/sda2 2050048 2582527 260M EFI System
/dev/sda3 2582528 4630527 1000M unknown
/dev/sda4 4630528 4892671 128M Microsoft reserved
/dev/sda5 4892672 1274335231 605.3G Microsoft basic data
/dev/sda6 1847777280 1859151871 5.4G EFI System
/dev/sda7 1859151872 1911580671 25G Microsoft basic data
/dev/sda8 1911580672 1953523711 20G Windows recovery environment
/dev/sda9 1335775232 1847777279 244.1G Linux filesystem
/dev/sda10 1274335232 1335775231 29.3G Microsoft basic data
And, bootinfoscript output:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/ubuntu/grubx64.efi
sda3: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/ubuntu/grubx64.efi /bootmgr /boot/bcd
sda4: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda6: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.02 ... :..(:,:0:4:8:....D:H:L:[.T:[.\:`:d:[.l:p:t:x:|:.:.:.:.:.:.:.:.....................
Boot sector info: Syslinux looks at sector 99102 of /dev/sda6 for its
second stage. SYSLINUX is installed in the /syslinux
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /grub/grub.cfg /syslinux/syslinux.cfg
/syslinux/ldlinux.sys
sda7: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda9: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Arch Linux ()
Boot files: /etc/fstab
sda10: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 2,050,047 2,048,000 Windows Recovery Environment (Windows)
/dev/sda2 2,050,048 2,582,527 532,480 EFI System partition
/dev/sda3 2,582,528 4,630,527 2,048,000 -
/dev/sda4 4,630,528 4,892,671 262,144 Microsoft Reserved Partition (Windows)
/dev/sda5 4,892,672 1,274,335,231 1,269,442,560 Data partition (Windows/Linux)
/dev/sda6 1,847,777,280 1,859,151,871 11,374,592 EFI System partition
/dev/sda7 1,859,151,872 1,911,580,671 52,428,800 Data partition (Windows/Linux)
/dev/sda8 1,911,580,672 1,953,523,711 41,943,040 Windows Recovery Environment (Windows)
/dev/sda9 1,335,775,232 1,847,777,279 512,002,048 Data partition (Linux)
/dev/sda10 1,274,335,232 1,335,775,231 61,440,000 Data partition (Windows/Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 CE62D9F062D9DCF1 ntfs WINRE_DRV
/dev/sda10 150a8788-6049-45ed-85af-ded92a2c0801 ext4
/dev/sda2 16DC-8816 vfat SYSTEM_DRV
/dev/sda3 7CDD-0403 vfat LRS_ESP
/dev/sda4
/dev/sda5 40E4E0CFE4E0C7EC ntfs Windows8_OS
/dev/sda6 9C3F-2A9E vfat
/dev/sda7 7240E43740E40427 ntfs LENOVO
/dev/sda8 422CE5EA2CE5D945 ntfs PBR_DRV
/dev/sda9 1a765403-f251-43d8-8edf-c191475d3837 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda6 /boot vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda6 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda9 / ext4 (rw,relatime,data=ordered)
============================= sda6/grub/grub.cfg: ==============================
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 1a765403-f251-43d8-8edf-c191475d3837
else
search --no-floppy --fs-uuid --set=root 1a765403-f251-43d8-8edf-c191475d3837
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
## Attempt at fixing grub
# insmod fat
# set root='hd0,gpt6'
### BEGIN /etc/grub.d/30_os-prober ###
#menuentry 'Windows Boot Manager (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-16DC-8816' {
# insmod part_gpt
# insmod fat
# set root='hd0,gpt2'
# if [ x$feature_platform_search_hint = xy ]; then
# search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 16DC-8816
# else
# search --no-floppy --fs-uuid --set=root 16DC-8816
# fi
# chainloader /EFI/Microsoft/Boot/bootmgfw.efi
menuentry "Windows 8 UEFI" {
set root='(hd0,gpt2)'
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
========================= sda6/syslinux/syslinux.cfg: ==========================
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 0 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux.img
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux-fallback.img
#LABEL windows
# MENU LABEL Windows
# COM32 chain.c32
# APPEND hd0 1
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL poweroff
MENU LABEL Poweroff
COM32 poweroff.c32
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
================= sda6: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
============== sda6: Version of COM32(R) files used by Syslinux: ===============
syslinux/cat.c32 : not a COM32/COM32R module
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/cmd.c32 : not a COM32/COM32R module
syslinux/config.c32 : not a COM32/COM32R module
syslinux/cptime.c32 : not a COM32/COM32R module
syslinux/cpuid.c32 : not a COM32/COM32R module
syslinux/cpuidtest.c32 : not a COM32/COM32R module
syslinux/debug.c32 : not a COM32/COM32R module
syslinux/disk.c32 : not a COM32/COM32R module
syslinux/dmitest.c32 : not a COM32/COM32R module
syslinux/elf.c32 : not a COM32/COM32R module
syslinux/ethersel.c32 : not a COM32/COM32R module
syslinux/gfxboot.c32 : not a COM32/COM32R module
syslinux/gpxecmd.c32 : not a COM32/COM32R module
syslinux/hdt.c32 : not a COM32/COM32R module
syslinux/hexdump.c32 : not a COM32/COM32R module
syslinux/host.c32 : not a COM32/COM32R module
syslinux/ifcpu.c32 : not a COM32/COM32R module
syslinux/ifcpu64.c32 : not a COM32/COM32R module
syslinux/ifmemdsk.c32 : not a COM32/COM32R module
syslinux/ifplop.c32 : not a COM32/COM32R module
syslinux/kbdmap.c32 : not a COM32/COM32R module
syslinux/kontron_wdt.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libgpl.c32 : not a COM32/COM32R module
syslinux/liblua.c32 : not a COM32/COM32R module
syslinux/libmenu.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/linux.c32 : not a COM32/COM32R module
syslinux/ls.c32 : not a COM32/COM32R module
syslinux/lua.c32 : not a COM32/COM32R module
syslinux/mboot.c32 : not a COM32/COM32R module
syslinux/meminfo.c32 : not a COM32/COM32R module
syslinux/menu.c32 : not a COM32/COM32R module
syslinux/pcitest.c32 : not a COM32/COM32R module
syslinux/pmload.c32 : not a COM32/COM32R module
syslinux/poweroff.c32 : not a COM32/COM32R module
syslinux/prdhcp.c32 : not a COM32/COM32R module
syslinux/pwd.c32 : not a COM32/COM32R module
syslinux/pxechn.c32 : not a COM32/COM32R module
syslinux/reboot.c32 : not a COM32/COM32R module
syslinux/rosh.c32 : not a COM32/COM32R module
syslinux/sanboot.c32 : not a COM32/COM32R module
syslinux/sdi.c32 : not a COM32/COM32R module
syslinux/sysdump.c32 : not a COM32/COM32R module
syslinux/vesainfo.c32 : not a COM32/COM32R module
syslinux/vesamenu.c32 : not a COM32/COM32R module
syslinux/vpdtest.c32 : not a COM32/COM32R module
syslinux/whichsys.c32 : not a COM32/COM32R module
syslinux/zzjson.c32 : not a COM32/COM32R module
=============================== sda9/etc/fstab: ================================
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda9
UUID=1a765403-f251-43d8-8edf-c191475d3837 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda6
#UUID=9C3F-2A9E /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
UUID=9C3F-2A9E /boot vfat defaults 0 2
UUID=9C3F-2A9E /boot/efi vfat defaults 0 1
============== sda9: Version of COM32(R) files used by Syslinux: ===============
boot/syslinux/cat.c32 : not a COM32/COM32R module
boot/syslinux/chain.c32 : not a COM32/COM32R module
boot/syslinux/cmd.c32 : not a COM32/COM32R module
boot/syslinux/config.c32 : not a COM32/COM32R module
boot/syslinux/cptime.c32 : not a COM32/COM32R module
boot/syslinux/cpuid.c32 : not a COM32/COM32R module
boot/syslinux/cpuidtest.c32 : not a COM32/COM32R module
boot/syslinux/debug.c32 : not a COM32/COM32R module
boot/syslinux/disk.c32 : not a COM32/COM32R module
boot/syslinux/dmitest.c32 : not a COM32/COM32R module
boot/syslinux/elf.c32 : not a COM32/COM32R module
boot/syslinux/ethersel.c32 : not a COM32/COM32R module
boot/syslinux/gfxboot.c32 : not a COM32/COM32R module
boot/syslinux/gpxecmd.c32 : not a COM32/COM32R module
boot/syslinux/hdt.c32 : not a COM32/COM32R module
boot/syslinux/hexdump.c32 : not a COM32/COM32R module
boot/syslinux/host.c32 : not a COM32/COM32R module
boot/syslinux/ifcpu.c32 : not a COM32/COM32R module
boot/syslinux/ifcpu64.c32 : not a COM32/COM32R module
boot/syslinux/ifmemdsk.c32 : not a COM32/COM32R module
boot/syslinux/ifplop.c32 : not a COM32/COM32R module
boot/syslinux/kbdmap.c32 : not a COM32/COM32R module
boot/syslinux/kontron_wdt.c32 : not a COM32/COM32R module
boot/syslinux/ldlinux.c32 : not a COM32/COM32R module
boot/syslinux/libcom32.c32 : not a COM32/COM32R module
boot/syslinux/libgpl.c32 : not a COM32/COM32R module
boot/syslinux/liblua.c32 : not a COM32/COM32R module
boot/syslinux/libmenu.c32 : not a COM32/COM32R module
boot/syslinux/libutil.c32 : not a COM32/COM32R module
boot/syslinux/linux.c32 : not a COM32/COM32R module
boot/syslinux/ls.c32 : not a COM32/COM32R module
boot/syslinux/lua.c32 : not a COM32/COM32R module
boot/syslinux/mboot.c32 : not a COM32/COM32R module
boot/syslinux/meminfo.c32 : not a COM32/COM32R module
boot/syslinux/menu.c32 : not a COM32/COM32R module
boot/syslinux/pcitest.c32 : not a COM32/COM32R module
boot/syslinux/pmload.c32 : not a COM32/COM32R module
boot/syslinux/poweroff.c32 : not a COM32/COM32R module
boot/syslinux/prdhcp.c32 : not a COM32/COM32R module
boot/syslinux/pwd.c32 : not a COM32/COM32R module
boot/syslinux/pxechn.c32 : not a COM32/COM32R module
boot/syslinux/reboot.c32 : not a COM32/COM32R module
boot/syslinux/rosh.c32 : not a COM32/COM32R module
boot/syslinux/sanboot.c32 : not a COM32/COM32R module
boot/syslinux/sdi.c32 : not a COM32/COM32R module
boot/syslinux/sysdump.c32 : not a COM32/COM32R module
boot/syslinux/vesainfo.c32 : not a COM32/COM32R module
boot/syslinux/vesamenu.c32 : not a COM32/COM32R module
boot/syslinux/vpdtest.c32 : not a COM32/COM32R module
boot/syslinux/whichsys.c32 : not a COM32/COM32R module
boot/syslinux/zzjson.c32 : not a COM32/COM32R module
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown GPT Partiton Type
e7afbfbf4fa38a449a5b6213eb736c22
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-p9ML2Cte/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-p9ML2Cte/Tmp_Log: No such file or directory
/dev/cdrom: open failed: No medium found
/dev/sdb: open failed: No medium found
No volume groups found
mdadm: No arrays found in config file or automatically
Any ideas?
Here's my grub.cfg:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 1a765403-f251-43d8-8edf-c191475d3837
else
search --no-floppy --fs-uuid --set=root 1a765403-f251-43d8-8edf-c191475d3837
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-1a765403-f251-43d8-8edf-c191475d3837' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6 9C3F-2A9E
else
search --no-floppy --fs-uuid --set=root 9C3F-2A9E
fi
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux root=UUID=1a765403-f251-43d8-8edf-c191475d3837 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-16DC-8816' {
insmod part_gpt
insmod fat
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 16DC-8816
else
search --no-floppy --fs-uuid --set=root 16DC-8816
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
Last edited by knowNothing23 (2013-12-30 00:17:02)Hi,
New to this forum, joined today in anticipation of trying an install of AL...For whatever this may be worth:
I have an HP Pavillion desktop that came with Windows 8 (now 8.1), & has, of course, a UEFI boot system. I tried earlier to install Ubuntu Studio (which I currently run) on the same disk as Windows (/dev/sda), I made (I believe) a huge mistake in trying to install as LVM/ext4... wiped out my Windows install & made the UEFI unavailable... I had to do a complete re-install of Windows (fortunately, I did the recommended system backup, using 4 DVD's!) so then I tried a (non LVM) install on an external usb 3.0, with the Grub 2 on the external disk (great access time, & it worked fine... IMO)...
One other item: as I have been trying to find the right flavor of Linux for my main purposes, I have been trying various distros. & having to try to learn to negotiate the UEFI, secure/legacy procedures (still learning)... As I was unsure of installing rEFind... I did down load the .iso, burn it to a CD...
http://www.rodsbooks.com/refind/getting.html
& in legacy mode, found that simply putting it (rEFind CD into the CD/DVD player, which in the UEFI it is labeled something like HP/UEFI CD/DVD), & then launching it, rEFind worked for some other distros...that is, I was able to boot into my Linux distros, even bypassing Grub), as well as having the option of booting Windows. It may seem trivial that I say this (it maybe is), but I have not seen anywhere (I have scoured the internet rather well) this mentioned as a possibility (though it, of course, would not make such a good permanent solution, especially for computers like mine that have only one CD/DVD player).
HenryP
Maybe you are looking for
-
i am trying using Calendar with Human Task, Use Business Calendar check box, Expiration on Human task not working correctly with Calendar. e.g, i have Human task with 10 min expiration but after 2 min he have a break according to the Calendar , the h
-
Trying to determine what cell is clicked in a thinlet table. I'm aware that a cell is not selectable in the table. I tried using the setMethod to pass a thinlet cell java file that permits access to the XML file. Here's a sample: cell = thinlet.creat
-
Hello, I want to report the net value of a Billing Request from a serviceorder before billing. Like the transaction DP90 serviceorder and simulate the sales document. I have tested the Function BAPI_BILLINGDOC_SIMULATE but the output was a message si
-
Hi, Getting the following error while starting soa_server1 <May 14, 2010 4:54:16 AM PDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'soa-infra' due to error java.lang.ClassNotFoundException: javax.wsdl.WSDLException. java.l
-
Box position in selectBooleanCheckbox
Hi, I render a checkbox with text with <h:selectBooleanCheckbox value="#{item.selected1}" > <h:outputText value="#{item.name1}"/> </h:selectBooleanCheckbox> and the result is that the checkbox is on the right of the output text: Room service<input ty