Windows XP and Windows 7 home sharing not working at all

Had a really old laptop with XP that I used basically only for iTunes. Now want to use homesharing to get all my music/apps from the old XP to a new, Windows 7 laptop. Both laptops are authorised to use my Apple ID and I've authorised and de-authorised it several times. I have activated and deactivated homesharing on both computers several times. I have also removed Firewalls from both computers, and I have made sure the "Bonjour" service is activated on both computers. Nothing is working, as soon as I click "done" after activating homesharing it disappears from the lefthand side column of the iTunes window on both computers. Please help I'm going to Uni in 6 days and don't wanna transfer this all manually!

I was able to resolve my issue. Here's how:
Did a lot of research on this. I have a Linksys WRT120N router where the only device not on Wifi was my Windows 7 PC (it was plugged in with an Ethernet cable while everything else was on Wifi). Having fiddled with the router settings to no avail, I went out and bought a Wireless USB adapter to put the Windows 7 PC on Wifi.
When I set that up, I could now see my Windows 7 library on the Apple TVs. However, when I went into the library, it was stuck on "Loading Library" in perpetuity.
I looked in my list of Windows services running (Start -> Control Panel -> Search for "Services") and noticed that, even though I disabled the Windows Firewall in the System and Security settings, the Windows Firewall service was still running. I disabled the service (right click -> properties) and restarted the computer. Voila, it works now.
It is possible that the problem was the Windows Firewall service (not the Wireless), but I've read countless posts where people had issues with the devices being on wired and Wifi and not seeing each other. As such, I haven't (and don't plan to) tested it back with just the Ethernet cable. If you're having my issue, you can try that first.
I should also note that when this wasn't working, I was also unable to use my iPhone to pair as a remote with iTunes. It would pair but the iPhone would be stuck in "Looking for" when I tried to control the library. This is now also fixed after doing the above.
Hope this helps anyone else frustrated out there.

Similar Messages

ITunes 10.6.3 home sharing not working properly

iTunes 10.6.3 home sharing not working properly. I can access with my three ATV2's watch a movie later that same day it tries to access and ATV2 just keeps trying and never gets through to the library. If I restart iTunes its fine then later can't access. I am running iTunes 10.6.3 on a i7 Mac Mini with 10.7.4. Sole job is to be iTunes server and an occasional HTPC with remote buddy running. I disabled remote buddy ajax remote feature, and file sharing is on so I can load new tracks form other macs Thats it, a vanilla install with all updates.. No problem prior but not sure if problem free period was with 10.6 earler versions or 10.5 versions. I update as warnings to do so come up. The remote app has same problem accessing the Home Share. I disabled home sharing on my iPhone and set to access the old method with 4 digit code and sees all the time and will play to my express base stations so seems to be home sharing issue because iPhone apps with home sharing on and ATV2s have issue accessing.
I'm never home but when I am I use this equipment loads and this weekend not reliable at all. I have firewall disabled, and setup is as before and is working fine. I am using Mini by ethernet and using AEBS 1st generation gigabit as router only wired to cable modem and whole house ethernet attached, latest version AEBS gigabit as a wireless bridge and 2 prior version 11n expresses and a 11g express, all expresses are set to wireless off and are connected to ethernet and then to a stereo in 3 different rooms.
I can't be only one. Considering downgrading to last version of 10.5 but not sure how to do this.
How many of you are having trouble?
Any resolutions?
How to report to Apple?
How to downgrade safely? Or is it 10.7.4?

I ran into the specific problem in another thread. There are more than 100 connections from the apple TV's to iTunes. You can do a netstat -a (windows or Mac), and verify the problem. iTunes is smart enough to stop allowing more than 100 connections but stupid to allow the ATV to create so many connections.
Now for what you really want! Set all of your ATVs to wifi only. Even setting the iTunes host to wifi might help also. I think that wifi is more unreliable, and forces connections to drop, keeping the count under 100.
I also turned off ip v6. That could help you also. I originally had problems on a Mac mini, and built a windows 7 box to try to fix the problem. The wifi trick worked on both platforms. Several of us have bug reports into apple. I have a wired house also, and am very angry to NEED to use slow wifi to overcome this problem. The ATV gen 3 has been able to keep up with 1080p over wifi, so it doesn't hurt too much. What really hurts is spending over 40 hours troubleshooting this bug.

Home shareing not working

home sharing not working in version 10.3.6

Home sharing is only supported on version of iTunes that run on OS X 10.5 or later. You could go to the app store and purchase the Mountain Lion update for $19.99, then update iTunes and then it should be easy to set up.

Does Home Sharing not work through a network extender?

Home sharing seems to cut out whenever I get into range of my network extender (Airport Express).
Here's my setup, it's pretty standard: Cable modem wired to Airport Extreme router, which is connected wirelessly to the MBP with my iTunes hard drive. All of this is in my living room.
I use the Airport Express to extend my network into the bedrooms.
Whenever I'm home sharing from my iTunes library on my iPhone, if I walk to my bedroom, it cuts out. It usually crashes the iPod app. If it doesn't completely crash it, I can get it to restart buffering if I walk back to the living room.
Does Home Sharing not work with wireless extenders? Do I have to change something in the set up?

However, when a device goes from being attached to one wireless device to another, there is often an interruption as the device must change the radio connection to the network. There is a brief period of no connectivity (a second or two)
Try starting the share while in your bedroom instead of the living room. I'll bet it works.
Makes sense - so it's a bug in the iPhone OS, that it's unable to recover from temporary interruptions to wifi connection?
However, I'm not so sure. Starting the share in the bedroom works as you suggest (since 4.3.2 - didn't under 4.3.1) - but as soon as you go back to the living room and the iPhone connects to a different base station the music stops playing. Note also that the shared library itself ceases to work. So for example you can't be in one room (on the extender) and add the shared library (without actually playing anything yet) then move to another room (on the base station) and play a track from the shared library. It just plays dead and you have to explicitly reload the shared library to get anything to play.
So is it maybe a bug also with iTunes that it can't keep up with a shared library client moving from one wifi station to another?
How do you report these things to the people that matter by the way?

HT1430 my ipod touch in error and the home bottom not working from month how i can turn it off please help me

please help guys my ipod touch not working and its in error and my home botton not working too from month how i can reset it and can i reset it from computer ?

You can't reset the iPod with the Home and Power buttons. All y can do is restore the iPod.
Place the iPod in recovery mode using one of these programs if necessary to allow the restore.:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Myi iphone4 microphone not working and the home button not work after IOS6 updat

Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
Make sure all your data is available on your computer for manual syncing later.
Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
And you are using iTunes 10.7?
I'm just trying to help get you going.

Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

The screen repair was botched. Take iPhone back to place of screen repair, and have them get the home button working again.

HT1349 Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and

Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and all other accessories .So , kindly help me as early as possible .Thankyou and tell me about its solution
<Email Edited by Host>

Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

IPod touch 4th generation, home button not working at all, Help?

IPod touch 4th Generation , home button not working at all, Help?

- Try restoring your iPod to rule out a software problem.
- The try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
iPad 2 home button fail: Apple Support Communities
You can turn one Assistive Touch in Settings>General Accessibility to use the screen instead. See chapter 30 of the users guide
iPod touch User Guide (For iOS 5.0 Software)
If under warranty make an appointment at the Genius Bar of an Apple store.

I've just edited all my apple id information and my iMessage will not work at all, can anyone help?

I've just edited all my apple id information and my iMessage will not work at all, can anyone help?

Try tapping Settings > FaceTime, turning FaceTime Off, editing the Apple ID associated with FaceTime, and then turning it back on.
If that doesn't do it, take a look at this Apple doc -> iOS: Troubleshooting FaceTime and iMessage activation

Tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off

Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Oil got into my ipod and now it will not work at all is it worth fixing or should i just get a new one

Oil got into my ipod and now it will not work at all is it worth fixing or should i just replace it with a new one ?

Replace it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

HT5654 i updated my ipad 3 to latest version of system upgrade and now it is not working at all. it just shows an itunes logo. I have tried restarting.

i updated my ipad 3 to latest version of system upgrade and now it is not working. All black screen with Itunes logo. I tried restarting

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

ITunes 10.5.1 Home Sharing not working (Windows 7 64 Bit)

Looks like this is being reported by a fair few people on the forums - so just wanted to add my voice. Since iTunes 10.5 (same in iTunes 10.5.1) on Windows 7 64 Bit home sharing has stopped working. I have all firewalls disabled on my Windows machine, have tried all the normal suggestions of signing out and back into home sharing on all devices etc. iTunes Windows library does not show to other devices on the network including iPad, iPhone and Apple TV (all running latest firmware as of 19/11/2011). Not looking for any responses here from the community, as the problem clearly lies with iTunes on Windows. Apple please fix!
In the meantime the only way I can use my Apple TV is to sync purchases down to the iPad and then Airplay them to the Apple TV. Very annoying. Maybe time to look for an alternative for movie and TV downloads as Apple TV is pointless without it being able to connect to my Windows iTunes library and downloads..

I am having the exact same issue - Homesharing just cuts out - particularly with my Apple TV2. All updates have been applied all around. I know it is not the router because I can still access the Apple Store, NEtflicks, and other web-based services. It is just the Homesharing that gets dropped.
As others have mentioned, closing iTunes and restarting it again helps temporarily. Really seems to be an iTunes issue.
iTunes 10.5.1.42
Win 7 64 bit
Apple TV2 - 4.4.3 (3323)

Home Sharing not working between wireless PC's / devices and ethernet wired PC's on the same router.

Home Sharing is not working between wireless PC's / devices and ethernet wired PC's on the same router. I installed a new Verizon FIOS ActionTec MI424WR GigE wireless / ethernet router, replacing the original FIOS router. With the old router Home Sharing worked fine across and among all iOS and Windows wired and wireless devices. With the new router Home Sharing works between and among the Wired PC's but not between the wired PC's and the Wireless connected PC's or iOS devices. Home Sharing also works between and among the wireless connected PC's and iOS decices but not between them and the wired PC's.
Only the router was changed. No changes were made to any of the devices except all were updated with the latest version of iTunes 10.7.0.21 and the iSO devices were updated to iOS vrsion 6.01. Three PC's are wired and all are running Windows 7. There also is a Windows Home Server connected to the router by ethernet port. It does not run iTunes but does provide WebDAV services to my iOS devices. This works fine. Two PC's are wireless, one running Windows 7 and one running Windows 8. All of the PC's are connected to the same (new) router via it's ethernet ports and it's wireless access point. Two of the wired PC's are connected via a high-speed ethernet hup that is connected to the router (Home Sharing works fine between the two PC's on the hub and the PC on the router). All wired and wireless devices on the router are visible and members of the router's Home/Office virtual network.
All of the PC's are visible in the Windows network and all shared files are accessable from all PC's, both wired and wireless.
Obviously the router seems to be the issue, something between the ethernet and the wireless access point components. I checked the settings and found nothing that would prevent Home Sharing between the wired and wireless devices. There is no setting that isolates the wireless network. I have done the following:
Read the router user manual and checked all the settings
Rebooted the router and tested.
Turned off the router's firewall and tested.
Home Sharing is turned on all the devices and all use the same Apple ID.
Restarted iTunes and tested.
Verified iTunes is "Allowed" in each PC's firewall.
Again, I can Home Share between the two wireless PC's but not between either of the wireless PC's and any of the wired PC's. I can Home Share between my iPads and iPhones and either of the two wireless PC's but not with any of the wired PC's. I can Home Share between any of the wired PC's but not between any wired PC and a wireless PC or iOS device.
I hope someone may have had a similar problem and has a fix suggestion. I'm stumped! I have a;so contacked ActionTec and awaiting an answer.

Solution from ActionTec is:
Log into your router.
Click the Advanced icon
Cclick Yes
Click on the IGMP Proxy
Select Disable
Click Apply

Windows XP and Windows 7 home sharing not working at all

Similar Messages

Maybe you are looking for