Windows XP and Windows Vista.

Okay, I recently had a friend fix my computer after a virus killed the whole thing, and he made it so that when I boot up my computer it gives me the option to get on either Windows Vista or Windows XP. I've had problems with my iPod on both systems.
Windows XP will detect that I have my iPod plugged into my computer, but it will not let me install iTunes. I downloaded the setup program, and that was fine, but when I double click the setup to install it, nothing pops up. It doesn't give me an error message, and the setup doesn't start.
Now, I installed iTunes on Windows Vista just fine, and it works. But Vista will not detect that I have my iPod connected to the computer.
When I have it on XP, my iPod has the connected screen on the iPod, and I can get into my computer and it will see it, but I get neither of those when I'm on Vista. If it's working in XP, I know it's not a problem with the chord or the iPod. It's obviously Vista that's giving me the problem. Any suggestions?

I suggest you post your question in the iPod and/or iTunes forums

Similar Messages

Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.

There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client
I have searched for possible resolutions including:-
Turning off the Cache for the share
Disabling the network adapter power setting to allow windows to put the device to sleep.
Disabling Antivirus/configuring it to ignore folders for on access scanning
Disabling SMB Signing
Configuring the clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache
Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
connections
The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.
I have looked at
http://support.microsoft.com/kb/2696547/en-us
I have disabled SMB2&3 on the server as that is very straight forward.
When I get to the section about disabling SMB2 on the client the command fails.
sc config
lanmanworkstation depend= bowser/mrxsmb10/nsi
  After running the above command, it returns an error:
      [SC] ChangeServiceConfig FAILED 1059:
      Circular Service Dependency was specified.
So it's not worth running the following command:
sc config mrxsmb20 start= disabled
I have tried the command on Windows Vista, Windows 7 and Windows 10 just to confirm that it's nothing to do with any particular PC, machines in Domains and Non-Domain machines.
So, my questions are:-
1, is
http://support.microsoft.com/kb/2696547/en-us actually correct and up to date and for the OSes (Vista, 7, 8, 8.1, 2012 server and Windows 10) with latest updates & service packs?
2, How do I disable SMB2 and SMB3 on clients for troubleshooting purposes the server to resolve problems with shared files (multi user access)
3, If I just disable SMB2 & 3 from the server would that force the clients not to use SMB2 when communicating with the server and therefore not caching the directory structure and file not found etc? I have seen posts that suggest this is not the case.
4. Does sc.exe have a bug in it?
Thanks in advance
Rob

Hi,
I made a test in our testing enviroment, everything works fine to disable SMB2 and 3. For your problem, in my opinion, as I didn't find any specific report about this error, it would be better to use Process Monitor to capture the trace when running the
command.
Start Process Monitor, then set the filter as cmd.exe, after that, open CMD and execute the command.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
In addition, I found another thread that had similar error with yours, you can take its solution as reference.
https://social.technet.microsoft.com/Forums/windows/en-US/506828c8-e7af-4039-aca7-43321939bb55/offline-files-synchronization-error-the-file-specified-cannot-be-found?forum=w7itpronetworking
Roger Lu
TechNet Community Support
Roger,
Many thanks for the time taken to look into this.
I've downloaded process monitor and loaded it. I filtered for cmd.exe started capture and saved a 1mb file.
However I don't think this is going to help unless you can point me in the direction of what you're expecting to see in the capture file? If you want me to send you it I can but it does contain personal information which I'd rather not place online.
You can recreate the problem yourself by doing the following:
Go to modern.ie
Download any windows 7 virtual machine for your preferred of virtualisation platform
log in, start cmd as administrator and run the command
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
You will also receive the same error.
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
You can also try it on the Windows 8 and 8.1 machine if you have time.
I checked the link to the similar error and that just looks at the file not found problem which is the smb2 cache. They still didn't resolve the slow access to the share which is seen on a machine that has anti-virus on it when you go to right click
on the folder or a file in the folder. It's about a 20 second (spinning circle) pause every time. The problem is bigger than that. If you have shared files on the network share that are used by multiple people at the same time, say a spreadsheet or database
file windows is loosing the connection to that file so the user cannot write to it even if they have the file open. The smb2 caching shouldn't cause that problem.
It appears that I have to disable from SMB2 and SMB3 and ensure that the clients only use SMB1.
If SMB2 & SMB3 are disabled from the lanmanworkstation service the clients will not do any caching even if the server has disabled the share cache (offline files for that share).
The problem with the "Circular reference" error message is standard across all versions of windows that have "smb2" or "smb2 and smb3". Can you recreate that problem? Or is it working on your windows computer and on the machines
downloaded from modern.ie ?
My testing has shown that the command "sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi" does not work. Therefore that's the one I want to resolve first. By resolving that I may be able to get the clients accessing the share to behave
themselves and use the shared files correctly as they always did from Windows 95/NT4 through to Windows XP and 2003/2008 server.
I'm unable to recreate the problem with multiple users having access to shared database files on windows 2012 server from Windows 7 clients were the access to the files drops once a day or once every couple of days.
Kindest Regards
Robert

BDB support for Windows Vista, WIndows 7 and Windows Server?

Hello,
I examine to use BDB on Windows, and I have a question.
There's a description about supported OSs on the BDB reference guide as follows;
Where does Berkeley DB run?
The Berkeley DB distribution includes support for Windows/95, Windows/98, Windows/NT, Windows/2000 and Windows/XP, via the Microsoft Visual C++ 6.0 and .NET development environments.
Does BDB distribution supports for Windows Vista and Windows Server 2003?
And it will support Windows Server 2008 and Windows 7?
I believe that BDB does not depend on specific function of Windows, thus there's no problem to support them...
Regards,
Akira

Yes, we have a plan about BDB support for Windows Vista, Windows 7 and Windows Server. Once we are ready, we'll let you know here.
Hi Vit,
For Berkeley DB XML questions, please go to the Berkeley DB XML forum at: Berkeley DB XML
By the way, I learnt there's a XP-compatible mode in Windows 7. You may want to try DB-XML with that.
Best regards,
Chao Huang
Oracle Berkeley DB

JRE v 1.6.0_21 on Windows XP and Windows Vista

I run an applet on JRE v 1.6.0_21 on Windows XP and Windows Vista, and it behaves differently on these 2 platforms. There is a servlet that sends date information using java.sql.date and the applet that receives these dates casts the date into java.util.date. (That can be corrected, and I just want to know if there are others who might be experiencing this behavior.)
On Windows XP with Internet Explorer v7, the date is displayed correctly by the applet. With Vista and Internet Explorer v7, the date displayed is one day before. My theory is in Vista the date with 0000 timestamp is considered the day before, while in XP a date with timestamp (all zeroes) is displayed as that date. When does a new day start - is it exactly at break of midnight, or a split second later? Seems like one would get 2 different answers from Vista and XP. Any thoughts? Thanks.

Appears to me like this issue is related to:
http://forums.sun.com/thread.jspa?threadID=5353667
My Windows XP box shows timezone = America/New_York while my Windows Vista shows timezone = GMT-05:00 with 'Automatically adjust clock for DST' already checked. Should be the same right? Possible that JRE is not reading the adjust clock for DST setting?
On Vista, when I set -Duser.timezone=America/New_York for the JRE settings in Java Control Panel, the applet behaves as I expected. Thanks.

Thumbnails not working in windows 7 and windows 7 RC

When I used to view my security camera video card in Vista I would get a thumbnail view of each 10 second video produced.. This made it easy to skip through each video produced and pick out the ones that I thought would be best to check. This would be watched after about a week or so of videos. Now in Windows 7 and windows 7 RC I cannot seem to find this thumbnail view. All I can see is the media player film type .AVI icon for each video. Is there any way of turning the thumbnail function back on. I have tried all the registry fix changes that have been suggested and they don't work. I have downloaded different codec programs and they don't work. The icon/thumbnail box is unchecked in folder views and that doesn't work. Is there an answer to my problem. Does any one know if Microsoft are working on a change to get thumbnails to work with .AVI files. Hope you can help.

Hi guys,
I found a solution for this issue on windows 7 64 bits !
I'm on the 7100 I couldn't get thumbnail preview for my .MOV or .mp4 files. Sometime I could get one or 2 thumb out of 30 in the folder.
I changed and added a few key to the registry to fix this preview thing:
IN REGEDIT:
_ HKEY_CLASSES_ROOT\.mov\shellex\
where I only had 2 key inside the shellex.
_I looked inside the mpeg shellex ( because mpeg would generate good thumbnails:
HKEY_CLASSES_ROOT\.mov\shellex\
where it had 3 keys
_SO what I tried was to copy those 3 key and replace my .mov shellex 3 key with those.
this is what you can do:
-open regedit
-right click on: HKEY_CLASSES_ROOT\.mov\shellex\
then export it ( it will be your backup in case it doesn't work or you mess up something you will just have to click on it to instal it again.
Then,
- remove the "HKEY_CLASSES_ROOT\.mov\shellex\ "KEY
-open notepad
-paste the following in your notepad file:
-----------------------don't paste this line-------------------------
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.mov\shellex]
[HKEY_CLASSES_ROOT\.mov\shellex\{3D1975AF-0FC3-463d-8965-4DC6B5A840F4}]
@=""
[HKEY_CLASSES_ROOT\.mov\shellex\{BB2E617C-0920-11d1-9A0B-00C04FC2D6C1}]
@="{c5a40261-cd64-4ccf-84cb-c394da41d590}"
[HKEY_CLASSES_ROOT\.mov\shellex\{E357FCCD-A995-4576-B01F-234630154E96}]
@="{9DBD2C50-62AD-11D0-B806-00C04FD706EC}"
-----------------------don't paste this line-------------------------
-save it under whatevername.reg ( be sure to use "all file" kind of type file.)
-double click on the reg file you just saves you just saved , it will reinstal the shellex inside the .mov key here:
HKEY_CLASSES_ROOT\.mov
with the right keys and stuff.
-close regedit
-open a folder containing your .MOV, refresh the files several times to be sure, it should be working.

I have disabled all Kaspersky security, windows firewall and windows defender and Itunes still will not update my Ipod touch 4th gen to IOS 5, Helppppp!

I can't get the IOS 5 to work for windows Vista. I'm running kaspersky pure 2.0, windows firewall and windows defender. I have turned them all off, I then attach my Ipod 4th gen and I get the "cannot connect to itunes update server". I ran diagnostics in itunes and it tells me I dont have a internet connection. I'm on the internet right now, and I DO have a internet connection, but it tells me Itunes says otherwise. I'm able to send this message on the same pc with internet connection but keep running into this error. I have now read discussiong boards through apple and disabled all my firewalls, still no luck. I was able to update the lates version of itunes, and just waiting to get my ipod updated now, please help me.

On the computer you should be able to go to the network properites. Go to the TCP part and unchec the line that says obtaind DNS automatically and check the one that says use the following. Add the 8.8.8.8 and Google other 8.8.4.4.
For more info see:
https://developers.google.com/speed/public-dns/

Can I install Windows 7 and Windows 8 to my MBA using Parallels and Bootcamp?

I have a Macbook Air (latest model, 11", i7, 256gb, 8gb ram, Mavericks).
I need to have access to Windows 7 and 8 and have been toying with the idea of getting a cheap laptop but the problem is most new machines are Windows 8 and they won't allow you to dual-boot with Windows 7 (you need W7 as your main OS and then install W8 later).
I'm also keen on not spending a shedload extra and carrying another device, so I was thinking if this was possible:
Buy Parallels Desktop 9 - then either using bootcamp or not, Install both Windows 7 and Windows 8.
I'm not fussed about running everything at the same time, happy to shut one VM down if it helps performance.
I have read that multiple OSs such as vista and XP worked once upon a time, but I get the feeling the screw is being tightened with all these cross OS installs and didn't want to drop a couple of hundred quid only to find out I'm trying something that isn't possible.
thanks for your advice.

I can't help you with Parallels, but I've been using VMware Fusion for quite a while and you can run Windows 95 through Windows 8.1 without difficulty, so Windows 7 and 8 on the same Mac is easy to do. I think your biggest difficulty will be the small size of your SSD. But with virtualization, you can put the virtual machines on an external SSD connected via USB 3.0 and run them quite well.

Synchronizing software for Windows 7 and Windows Mobile

Hi All,
I am trying to synchronize my PC with a Windows Mobile device (Scanner). When I googled I came to know Microsoft Mobile Device Center 6.1 is used to synchronize Windows Vista with many devices. But I am looking for a software which can synchronize my Windows
7 PC and Mobile Device.
Can someone suggest me on this. It's pretty urgent.
Please refer to the System Requirements - Supported Devices section in the url mentioned below. This is for Windows Vista. Similar to this I am expecting a software for Windows 7.
http://www.microsoft.com/en-in/download/details.aspx?id=3182&hash=brh0xPqEh%2fYvZrNW0SOms8%2bsu3y9ux3a7FJ82ZE%2fKs5tbE5ltglLsiv%2fE1zCxMJLIpRUpN8wayd5sLmhjkXdag%3d%3d

Hi,
Regarding sync issue between mobile device and the Windows 7 system, we could accomplished it with device stage.
Description:
There are two primary ways to sync a mobile phone, portable music player, or other mobile device with your computer. You can install the sync software that many manufacturers include with their devices, or you can use the new Device Stage feature in this
version of Windows if your device supports this feature.
Device Stage lets you sync music, contacts, calendars, and other files and information with a compatible mobile device. It also allows you to perform other device-related tasks that vary depending on the device, such as creating ringtones for a mobile phone.
What files and information you can sync depends on the type of device you have and what it supports. For example, you may be able to sync contacts and calendars with a smartphone, but not with a portable music player.
More information, we could take a look at the below links:
Sync music, pictures, contacts, and calendars with a mobile device
Device management
Besides, some folks told that Winodows Mobile Device Center 6.1.6965 will work and sync well on Windows 7 Professional, and to install WMDC, we should have Windows Media Player running first.
Please take a look at the below thread:
Windows 7 and Windows Mobile 6.5
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Windows 7 and Windows 8 in the same computer

I have HP Pavilion HDX9300 with two hard discs. I have installed Windows 7 in och of them and Windows 8 in the other. Both W7 and W8 works when the disc is placed in one of the discplaces but not in the other.
If I want to change from W7 to W8 I thus have to change place for the hard disc. My desire is to change from W7 to W8 without changing places for the harddiscs. Is it possible? If so, how do I do?

I believe the second hard drive bay in the HDX9300 is not bootable. You need to load Windows 8 on the same hard drive as Windows 7 as a dual boot.
http://www.extremetech.com/computing/143380-how-to-dual-boot-windows-8-and-windows-7
You could then use the second drive as storage accessible to both operating systems.

Problem dual booting Windows 8 and windows 7 G480

I bought new laptop g480 and it comes with windows 8 single language and I want to dual boot it with windows 7 Ultimate. So I create one partition 50 Gig using Minitool Partition Wizard, after that I boot into USB device ( I've bootable Windows 7 USB and already disable secure boot in BIOS). The process went fine until it ask me where to install the windows, so I choose the partition 50 Gig I created before but I get this message "Windows cannot be installed to this disk of the GPT partition style". Help me guys how to solve this problem, I've searched solution for this but non of them seems working for me. Step by step will be good for me. I hope to get quick reply for this because I've this problem since 2 days ago and never get solution .
Thank you.
Solved!
Go to Solution.

Hi @CharlyAR
I tried your solution before I posted the message here but it didn't work but then I give it try again and I manage to install the Windows 7 ultimate. Now my pc dual boot with windows 7 and windows 8 (windows 8 is the main OS).
p.s. This is important guys, if u want to make windows 7 bootable USB by following the tutorial on youtube it wont work if you pc/laptops is pure GPT (UEFI) because most of them using MBR to make the tutorial thats why it look easy and works for them, it's almost same but there's "add-on" with GPT mode. You have to make the windows 7 bootable USB in GPT (UEFI) mode or it wont let you install. I couldn't find tutorial for this GPT mode on youtube.
All I do is search my old DVD-RW and erase it and I follow the tutorial here, same what @CharlyAR told me
http://www.youtube.com/watch?v=z7rRsQGew28

My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on.

My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on. I have the little arrow that normally selects my AppleTV in iTunes but AppleTV is no longer listed (only My Computer). Is there an issue with the latest update. This is probably my fault by telling everyone how good AppleTV is and that it just works! Doesn't work any more :-( I have tried all the usual restarting of AppleTV and PCs. I'm having to revert back to the Samsung Blu-ray player's PC sharing :-(

Restarted router(s) and it works again.

I can no longer download any NPR podcasts I subscribe to. I can download and listen to other podcasts but none from NPR. I have tried on Windows 7 and Windows 8. Other podcasts, music etc. download fine.

I can no longer download any NPR podcasts I subscribe to.
I can download and listen to other podcasts but none from NPR.
I have tried downloading the podcasts on computers that run Windows 7 and Windows 8. Other podcasts, music etc. download fine.
iTunes version: 11.3.0.54
I have tried uninstalling, reinstalling iTunes and I have tried unsubscribing and resubscribing to the podcasts.
I don't have trouble getting NPR podcasts from the store. I just can't play them in iTunes.

For additional context and to verify if we are talking about the same behavior. Here is what the download screen looks like on my iPod:

When silverlight will work in windows 8 and windows 10

when silverlight will work in windows 8 and windows 10?

Hi,
I'm using windows 8.1,silverlight 5 works fine on my machine.
If you want to know if silverlight can works on windows 10 , you should wait for microsoft's offical statement.
Learn more about silverlight comaptible system,please check link below:
http://www.microsoft.com/getsilverlight/get-started/install/default.aspx?reason=unsupportedplatform
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SCUP - Deploy Updates for both Windows 7 and Windows 8.1 rules Detection

Hi all,
I encounter a little issue regarding the update deployment from SCUP.
For example, I would like to deploy Firefox updates on both Windows 7 and Windows 8.1. Firefox Updates are deployed and installed on Windows 7 without any problem. But Nothing happen on Windows 8.1.
I think my problem is on my Installable Rule I have created. As it's not possible to select Windows 8.1 as a condiftion (like Windows 7) I have created a WMI query.
Before using a WMI query, I tried to use Major version and Minor version without success.
Does anyone has already used this sort of scenario ?

Shouldn't you do the following things (see also:
http://technet.microsoft.com/en-us/library/hh134743.aspx):
Add Windows Language is French to the top AND;
Change the second AND to an OR;
Add the WMI Query to the new OR (so it's at the same level as the
Windows Version = Windows 7 SP1);
Remove the last OR (as it's not being used anymore).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit

I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install.
Solution: Roll back the driver for the relevant SATA controller to the previous driver.
I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
I hope this post will help other people with this problem find the solution a lot faster than it took me!

This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess. If the storage driver doesn't report the physical sector size to Windows, update fails.
I just ran across this myself (again) putting Win 7 on a T400.
I don't know why this is still going on. It may be that the update lists for older machines still have pre-AF-drive drivers listed.
FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver. This may be more desirable than rolling back to an older driver in some cases.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows 2003 and windows 7 access compability

Hi,
I am now using IBM server with windows 2003 32 bit operating system and clients are windows xp and windows 7. I want to know that if I convert all clients to windows 7. Is there any connectivity/accessing issues to server.
Is there any compability / accessing issues within windows 2003 and windows 7?
Thanks in advance

Hello,
Windows Server 2003 is going out of support 2015.
Windows 7 works together with it without problems.
If this is a domain you have to be aware that GPO settings for Windows 7 should be configured from a Windows 7 machine with RSAT installed, otherwise lot of settings are not available within Windows Server 2003.
Also you have to think about server stored profiles, if used, as the .V2 profiles are used with Windows 7 and the older profiles will not work for users logging on to the Windows 7 machines.
Maybe there is more to consider but therefore the information you have provided is too less.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Windows XP and Windows Vista.

Similar Messages

Maybe you are looking for