Windows Xp bad sound quality after installing itunes 10.5

After installing itunes 10.5 to be able to get the ios5 update my itunes plays every file with really bad, distorted quality. I try other players even Quicktime works fine. What could be happening?

Try to download, and install the latest Realtek HD Audio driver.
Here is the download link:
http://www.realtek.com.tw/downloads/
Select the second options (High Definition Audio Codecs (Software))
And when you install this, i think everything will be good.

Similar Messages

  • Audio sounds horrible after installing iTunes vers 10.5. How do I restore the audio quality?

    How do I restore audio quality after installing iTunes version 10.5? The audio is high-pitched and metallic.

    I wish i knew, no feedback or help forthcoming from apple yet

  • Windows 7 BSOD randomly occuring after installing iTunes 10.6 with iPhone 4 in dock

    After installing iTunes 10.6 and IOS 5.1 on my iPhone 4, Windows 7 computer was randomly blue screening with the iPhone 4 in the attached dock. After removing the phone from the dock, system works fine.

    Re-installed iTunes as you suggested and it worked.  However, started experiencing random BSOD's.  Disk check found a number of file errors on the boot drive - which it fixed.  It then took a number of re-boots before computer became stable. 
    Then, upgraded iTunes on a HP workstation (no iPhone attached).  On reboot windows had to attempt a boot repair 3 times before it would reboot.  Couldn't even do a disk check without first reverting to the last restore point.  It also corrupted Norton.  The end result was 2.5 hours of wasted time.
    Being an expert pc user, I can safely say that I believe Apple has some serious issues with 10.6.

  • Windows 7 will not launch after installing itunes 11.1.5.

    I initially tried updating itunes but it wouldn't so I uninstalled all Apple products in order per another post I found. Then reinstalled all products and itunes worked fine. I then shut down my computer for the night, then next day windows wouldn't launch.  I did a system restore prior to the itunes update and windows works fine.  I tried reinstalling itunes again and had the same problem.  So now I don't have itunes installed. Anyone know how to get itunes to not prevent windows 7 from launching?

    My MBP (15", early 2009 model, 8GB RAM, 1TB internal drive) showed in Software Update as not needing any other updates, and I downloaded from Apple's site directly and installed iTunes 11.1.5 rather than doing it via Software Update (I've had some glitches with the 'direct' install from SU in the past, so I manually download updates from Apple's support website instead).
    Hoping Apple will figure out what's wrong with this version under 10.6.8...

  • Sound Issues after installing iTunes 7.7

    I installed itunes 7.7 on my Powerbook g4 this morning and lost sound. When I open preferences, it says I have no internal output device installed? What's the fix?
    <Edited by Moderator>

    I ran disk utility from my Leopard DVD, repaired the disk. The sound worked upon restarting.

  • Windows error after installing  itunes 8.0.2.20.

    I' ve a problem after installing Itunes 8.0.2.20.
    When i try to use Itunes i get the message windows with a log and use of itunes is broken.

    Might have been a bad cable. I reinstalled. Got a crash again. Tried a different cable. It worked.

  • How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

    How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7.  HP computer intel Dual Core.  Thanks for any help!

    Hey idw3,
    Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/HT1364
    Regards,
    David

  • ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows

    After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
    Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
    There was one other error I came across after trying to launch iTunes after installation.
    See both error messages here:
    http://screencast.com/t/DSg4PpKF5BeX

    Brilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
    I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
    But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
    It should have been added to their page at 
    http://support.apple.com/kb/HT1923
    by now, why hasn't it???
    It's not good enough!
    Re:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
    "C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
    AHA! This entry for iPodService.exe still exhisted.  So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
    Step 5 - Delete only the Registry entry above.  NO REBOOT
    Step 6 - Reinstall iTunes64.exe

  • After installing itunes 10 installation was successful but then tells me error 2 (windows error 2), After installing itunes 10 installation was successful but then tells me error 2 (windows error 2)

    After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver

    After installing itunes my computer stalls when loading atipcie.sys driver. Computer will not boot up in safe mode or Last known good. Only resolution was to perform System Restore to a time before itunes was installed, thus deleting the itunes installation
    Anyone know of a fix or workaround for this issue ?

    Windows 7 64 bit core i7
    BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this.

  • HT1923 how do you get the dvd drive back after installing itunes to windows 7

    How do you get the dvd drive back after installing itunes to windows 7??

    Safari/Preferences/General and set a new default.

  • I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    problem solved.
    I phone 4s screen froozen

  • No cd drive after installing itunes

    Hi,after installing itunes to my packard bell notebook i noticed that i had no cd drive showing in 'my computer'when trying to start my cd writer it showed 'no recorder'.i've had to uninstall itunes and download a update from roxio to get my cd writer back again.please can anyone help me with this problem.also is it possible to sync my ipod nano with windows media player without installing itunes.
    Regards,Tony

    No you can't use WMP to sync your iPod.
    You could take a look at Yamipod which allows you to manage your iPod without iTunes, but why not try and get iTunes working.
    http://www.yamipod.com/main/modules/home/
    There is a help on trouble shooting CD problems here:
    http://docs.info.apple.com/article.html?artnum=302974
    It sounds as though you want the link near the bottom on inability to use CDs.
    There is also a microsoft link on CD problems that you might find useful:
    http://support.microsoft.com/kb/314060/

  • E430 Fix bad sound quality with Win 7 + Dolby Advanced Audio

    Problem:  In Windows 7 x64, sound quality is tinny and sounds very badly DSPed when Dolby Advanced Audio is activated.  Even setting all effects off and EQ off the sound is bad simply because Dolby is/was turned on.  Going to Sound > Playback > Speakers > Properties > Enhancements, checking Disable All Enhancements and clicking Apply clears up the sound, but then the EQ won't have any effect.
    Solution:  If you have Win 7 x64, uninstall the Win 7 driver (h0a114ww.exe) and instead install the Windows 8 driver (h0ac10ww.exe).  Note that this is NOT the Win 8.1 driver - that won't install under Win 7.  The sound quality will be way better when you use Dobly EQ and effects.  So far I haven't had any stability problems.
    I thought my E430 had the worst sound card ever until I upgraded to Windows 8 and installed the new driver.  I have Windows 7 dual booted and found the sound quality in Win 7 terrible so I played around with it and found the above solution. 
    Solved!
    Go to Solution.

    Hi FunkyB,
    Welcome to Lenovo Community!
    I want to thank you for the assistance provided on the issue. Please feel free to post in Lenovo Community Forums if you have any further queries!
    Please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Cheers!
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • IPhone is no more visibile in My Computer after installing iTunes 8

    Hi all, after installing iTunes 8, iPhone isn't visible anymore in my Computer section in Windows. Previously, when I connected it, it was recognized as a photocamera and, from my Computer, i could access to it to see the photos that are stored on the iPhone.
    Now, instead, iPhone isn't displayed anymore: except for this, it works correctly; iTunes 8 recognizes it and synchronizes it.
    Notice: after the iTunes upgrade, when I've connected the iPhone for the first time, Windows says that he has found a new hardware and installed a new driver for an Apple Mobile Device USB.
    Has someone else experienced my problem? Thanks in advance!

    im having the exact opposite problem....my 3g is recognized inmy computer as a camera..but isnt recognized in itunes?
    i have no pics downloaded from emails (as i researched this before)
    the other night had same problem, had to restore phone, and re-install itunes..then no problem...but tonite trying to add new music and same thing again.
    disabled iphone under imaging devices, and its only listed under usb controllers...computer recognizes it every time
    there has to be a better way than restoring/reinstalling everytime?..has to be some little catch?
    HELP!
    FYI, i phone not being used as phone, being used as ipod, and only using wifi..has no sim installed.

Maybe you are looking for

  • I'm having a problem opening my files -..

    I'm having a problem opening my files -..for example if i want to download something off the internet and run it after it always opens in Textedit which is annoying-..other programs open fine which are dmg but the exe files won't run-.i need help

  • CTI Problem in inbound call scenario with Siemens OpenScape Contact Center (CMS)

    Hello Experts, we are working on a SAP CRM 7.0 EhP 2 with CTI to a CMS from Siemens (OpenScape Contact Center). The basic integration works perfect, so that agents get informed about incoming calls in their Interaction Center UI and so on. Currently

  • How LIPS  item link the MSEG item?

    Dear ALl,        I have a program need to LIPS link MSEG to calculate the posting quantity.I know in MIGO,table MKPF have field saved the DN number.but not saved the item. current my program is : SELECT MKPFMBLNR MSEGERFMG MKPFXBLNR MSEGMATNR        

  • Using Function module to calculate date

    Hi, I need to use an exit variable in Bex in order to dynamically add or substract months, days, and years from another input variable and have a date interval. After searching, i found that the FM   RP_CALC_DATE_IN_INTERVAL is exactly what i'm searc

  • Class not registered - CrystalPrintControl error.

    This problem was happening in SP1 and the solution is to manually copy the files in C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers folder and register PrintControl.dll. I j