Windows XP couldn't remote desktop Windows2012

Hi Everyone:
I have an issue as the following lines indicates.
"An authentication error has occured.The specified target is unknown or unreachable"
The remote side is Server2012,however the Windows 7 client can remote desktop the Windows Server 2012 sucessfully.
Any help or suggestion will be appreciated.
By the way how to verify my account,I want to insert a problem picture,however the system told me that I should verfiy my account by Microsoft first.

Hi,
Thank you for posting in Windows Server Forum.
Agree with the words of Jeremy, firstly please check that required details for server connection. In addition, also verify that on your RDCB server, go to system properties, Remote tab and make sure that Allow connections only from computers running Remote
Desktop with Network Level Authentication is unchecked.
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

How could I turn off the Command Key to Windows Key mapping in Remote Desktop for Mac 8

I'd like to be able to turn the Command key->Windows key mapping off. In this new app, whenever I use the Command key to initiate a Mac-side function, it registers a press of the Windows key within the Remote Desktop session. Speaking only
for myself, I use the Command Key for quite a lot of Mac operations, while my need and expectation for a Windows key press is zero.

I'd like to be able to turn the Command key->Windows key mapping off. In this new app, whenever I use the Command key to initiate a Mac-side function, it registers a press of the Windows key within the Remote Desktop session. Speaking
only for myself, I use the Command Key for quite a lot of Mac operations, while my need and expectation for a Windows key press is zero.
Agreed. Cannot stop it by disabling the "Windows" key (from within Windows 7). Every time I Cmd-Tab to change apps, the Start Menu pops up,
and persists, overlaying other app windows. Much more than annoying.
Also, there is no Clipboard Sharing, apparently. Love typing in long binary strings into the Registry.

Can't configure my windows 8.1 to Remote Desktop

Hi,
So I have some problems I don't know why my windows does not have the remote access thing that I see in all tutorials online to configure the remote desktop. Just the "Remote assistance".
Could you guys help me?

Hi Danigol,
Here you have a pretty handy guide on how to configure it:
http://winsupersite.com/windows-8/windows-8-tip-use-remote-desktop
Hope you find it useful

HT201068 In the Ap Store "Updates" window, it says that "Remote Desktop Client Update" was installed today. I never intentionally installed "Remote Desktop". How did it get there, Where is it on my computer, and How can I remove it? Thank You!

In the Ap Store "Updates" window, it says that "Remote Desktop Client Update" was installed today. I never intentionally installed "Remote Desktop". How did it get there, Where is it on my computer, and How can I remove it? Thank You!

I don't know if you have been there, but a very suspicious icon! (Like this one on a NSA satellite: http://b-i.forbesimg.com/kashmirhill/files/2013/12/Satellite-logo-for-spying.jpg) Yikes!
Are they after the French too?!? I thought we were allies?!? Wait a minute . . . I'm an American citizen with the Constitutional Right (which they vowed to uphold when they took their job!) of privacy!!!
What do you think of all this?
How did you find it in the OS?
Do I just trash it with "Secure Empty"?

Does Windows Server 2012 support Remote Desktop Client 6.1?

Hi,
Does Windows Server 2012 support Remote Desktop Client 6.1? IU can't find a link anywhere on the Microsoft site to confirm this!
Thanks,
Jim

this should help you
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS

My keyboard doesn't work when I connect to a Windows 7 computer with Remote Desktop.

I got a new computer at work that has Windows 7 Professional 64-bit on it. I set up a Remote Desktop connection from my iMac at home and connected. However, when I tried to use the keyboard, nothing happened. After a little pecking I found that the DELETE key worked. Also, I found that the keyboard would work correctly if I held down the FUNCTION key. Very weird.
My old Windows XP computer was still connected so I connected to it via Remote Desktop. The keyboard works normally there. It has always worked in Windows XP so I was surprised when it didn't work in Windows 7.
I've been searching but haven't found anyone with this same issue. Any help or suggestions would be appreciated. Thanks.
Steve Lockridge
iMac 21.5 inch, mid-2010
OS X 10.7.5 (Lion)
3.2 GHz Intel Core i3
12 GB RAM
Apple Wireless Keyboard

1. Did you use Bootcamp Assistant?
2. Did you build a USB with Windows 7 ISO and Bootcamp drivers?
3. You should use a USB2.0 disk, not a USB3.0 disk (flash drive).
4. What year is the Retina MBP?

Windows Home Server 2011 - Remote Desktop Issues

I had been using my administrator account to log into my headless Home Server remotely. Didnt have to do it often. I tried today and got:
"To log on to this remote computer, you must be granted the Allow log on through
Terminal Services right. By default, members of the Remote Desktop Users group have this
right. If you are not a member of the Remote Desktop Users group or another group that
has this right, or if the Remote Desktop User group does not have this right, you must be
granted this right manually."
How can I log into the machine to give myself rights? Am I going to have to yank it down out of the closet and hook it up to a monitor?

Your question has not been answered.
Windows Home Server 2011 does not use domains, so even if you had Windows 8.1 Pro, you'd still be left without a solution. I have one PC with Windows 8.1 Enterprise and that does work with Home Server; and a laptop with Windows 7 Pro and that works fine
too. Like you, I have issues with Windows 8.1 Pro.
Does anyone from Microsoft Server actually read these posts?
@PeterPensive,
the OP's original question was relating to "linking/combining" an MS Account with a Win8.x local account. That question was answered. (the answer is no), so, for a WHS scenario, linked accounts aren't possible, but, in Win8.x, an MS Account might be suitable
for use with WHS.
Are you confirming that an MS Account on Win8.x works ok with WHS?
< Also, this is a community-driven forum - MS staff rarely, if ever, participate here.. >
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Windows 8.1 Update - Remote Desktop missing from Remote Tab

I recently purchased a new Lenovo G780 with Windows 8. I updated to Windows 8.1 this past weekend.
I was surprised to find the "Remote Desktop" section (on Remote tab in System Properties) was missing. I can see "Remote Access Assistance" but not "Remote Desktop". Note that I can run Remote Desktop to connect to another computer, but w/out this setting I am UNABLE to accept incoming remote desktop requests.
I did find a link related to my very same issue, though for an earlier windows version.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/e51a7001-85f7-4578-af65-6dee5a35c261/...
I have same symptom, just newer OS I can only surmise that my Windows 8.1 update messed something up. It may be possible this was the situation before I updated to Windows 8.1, as I don't think I messed with that setting.
Does anyone know of a fix? Apparently re-inputting the Product Key (and reactivating Windows) might help solve but I don't have a Product Key for Windows 8...will Lenovo supply that?
Solved!
Go to Solution.

Hi dsmall2112,
I think you answered your own question again. The upgrade from Win 8 basic will only go to 8.1 basic. The key you have will only work on the Win. 8 basic and the upgrade to 8.1 will still only give you 8.1 basic, with that key.
In order to get Win 8.1 Pro features, you will have to buy a Win 8.1 Pro key.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How do I simulate a right-click in Windows when connected with Remote Desktop 8.0 for Mac OS X?

When connecting to a remote Windows 7 OS from Mac OS X 10.8.5 with Microsoft Remote Desktop 8.0.24091, I'm not able to simulate a right-click with the Apple magic mouse.
On an older version Microsoft Remote Desktop Client version 2.1.1, I can hold down shift+ctl on the Mac and click the magic mouse to simulate a right-click in Windows. With this new version RDP 8.0, I can't find any way to simulate a right-click,
other than to select "Swap mouse buttons" under settings, and then every click is a right-click and then I'm no longer able to left-click (which is even worse). I've tried several key combinations and nothing seems to work. Am I missing
something simple here with the new RDP 8.0 application, or is the right-click simulation not (yet) functional?
Any help is greatly appreciated, thanks!

In order to make use of the right-click inside an open session you have three options:
Standard PC two button USB mouse
Apple Magic Mouse: To enable right-click, clickSystem Preferences in the dock, click Mouse, and then enable Secondary click.
Apple Magic Trackpad or MacBook Trackpad: To enable right-click, click System Preferences in the dock, click Mouse, and then enable Secondary click.
Extracted from "Remote desktop Client on Mac: FAQ"
http://technet.microsoft.com/en-us/library/dn473006.aspx

How to set a default printer using vbs on windows 2008 R2 with remote desktop services

Hello
It seems I wasn't in the right places before / threads. BIG Sorry.
Here's the problem: I have this VBScript:
On any computer, the Default Printer "HisBadPrinter"
strPrinterName = "mySuperPrinter"
Set objPrinter = Helper.CreateObject("WScript.Network")
objPrinter.SetDefaultPrinter strPrinterName
In Xp, Windows 7 it work perfect, The default printer is being changed.
But in Remote Desktop on Windows Server 2008 R2 it is not working, with any type of account (Administrator, user, powerUser...) "HisBadPrinter" is always the default printer and it's always printing on it without any error messages.
Help Please.

Ok, here what I have in my ControlPanel > Devices and Printers
Adobe PDF (redirected 3)
Brother HL-4150CDN series on infovm1dc (redirected 3)
Generic / Text Only (redirected 3)
HP Color LaserJet 3800 PCL 5c on infodc3 (redirected 3)
Microsoft XPS Document Writer
Microsoft XPS Document Writer (redirected 3)
PDFCreator (redirected 3)
Now Here what I got when I executed the bit of code :
TS011
Adobe PDF (redirected 3)
TS013
Microsoft XPS Document Writer (redirected 3)
TS012
Generic / Text Only (redirected 3)
TS015
Brother HL-4150CDN series on infovm1dc (redirected 3)
TS016
HP Color LaserJet 3800 PCL 5c on infodc3 (redirected 3)
TS014
PDFCreator (redirected 3)
TS002
DIRECT - Brother HL-2460 (redirected 2)
TS006
PDFCreator (redirected 2)
TS003
Fax (redirected 2)
TS005
Microsoft XPS Document Writer (redirected 2)
TS007
Brother HL-2460 on infodc3 (redirected 2)
TS004
Microsoft Office Document Image Writer (redirected 2)
TS001
Brother HL-4150CDN series on infovm1dc (redirected 2)
XPSPort:
Microsoft XPS Document Writer
There is no printer called "\\ALPHA\HP LaserJet P2015 Series PCL 6".
OK

Windows Server 2012 Standard - Remote Desktop Management service won't start

Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
The Remote Desktop Management service gives the following error message any time it is attempted to start:
"The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
The Event Viewer error message is as follows:
"The Remote Desktop Management service failed to start. Error code: 0x88250001"
Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
server and has AD DS role installed, is virtualized to have one Hyper-V server.
I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
only one suffering from this issue.
I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
How do I mend Remote Desktop Management service to start?
Appreciate your help!

Hi,
Thank you for posting in Windows Server forum.
Can administrators perfectly connect to RDS environment?
In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
What's New in Remote Desktop Services in Windows Server 2012
http://technet.microsoft.com/en-in/library/hh831527.aspx
Install Remote Desktop Services Failed on Windows 2012 Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Windows 2008 R2 Standard Remote Desktop Users cannot Connect

I have a windows 2008 R2 Standard Terminal Server and some users aren't able to connect even though they are in groups that are in Remote Desktop Users on the local computer. I checked the local security policy setting "Allow log on through Remote
Desktop Services" and I see that Remote Desktop Users is a member of this group. Inside of Remote Desktop Users we have DOMAIN\Domain Users and DOMAIN\Terminal Users. Most of our users are in both groups, but there are still some people that
aren't able to connect via Remote Desktop to this computer. There are no users in "Deny logon through Terminal Services."
Thanks!

Hi,
Thank you for posting in Windows Server Forum.
Is it happens to all users or any particular group of users?
Please check by creating new user add them to “Remote Desktop Users” group and then see whether that test user can remote desktop to the server.
It also might happens that you may be limited in number of users or some connection issue or may be firewall setting issue. Please go through beneath article for information.
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176
Hope it helps!
Thanks.
Dharmesh Solanki

Windows Server 2008 R2 Remote Desktop - The requested session access is denied

Hi, I have been using Windows Server 2008 R2 since it was released, and have 100 servers up and running. I configured Allow Remote Desktop on all of them and have been able to connect to them and manage them via RDP since then. I also have two servers configured as Remote Desktop Services.
That was up until yesterday. Yesterday afternoon I started getting the The requested session access is denied. I managed all Terminal services via Group Policy and have three users entered.
I am connecting to the servers via Windows XP SP3 and Windows 7. Both clients have been updated to the latest Remote Desktop Services client.
I have been searching for the answer, and I am not finding it.
I have also tried KB954369 without any success.
Thanks,
Brian

Ok, from my trials and tribulations and discussions with Microsoft I have identified the following;
Assumptions;
A. My terminal server is in domain widget
B. All the users are in domain contoso
1. I had the Terminal Server configurured with a specific Login, which would launch a specific application only and not give them any desktop functions. Wiht this configured this way, I get the error I wrote about.
2. If I turn the specific login off, then I can login normally and perform the functions as Administrator that I need/want to do.
3. Microsoft said to configure the Terminal Server with Single Sign-on. I did as instructed and went thru all the steps, however because my terminal server is in domain widget, the users get prompted twice each time for login. Once on the website, and then again as the application launches. Microsoft said that the users needed to Remote Desktop Client 7.x or the self-signed certificate that I have has to be included in the domain contoso certificate authority so that they will not be prompted for the second sign-on.
4. Conclusions - I need to have a chat with our enterprise security team about including the self-signed certificate in the contoso certificate authority. I need to also work on my RDWeb website so that it meets our company standard look.
Here are the links that Microsoft provided;
http://technet.microsoft.com/en-us/library/cc772108(WS.10).aspx
Enable RDC Client Single Sign-On for Remote Desktop Services
http://technet.microsoft.com/en-us/library/cc742808.aspx
Blogs -
http://blogs.msdn.com/rds/archive/2007/04/19/how-to-enable-single-sign-on-for-my-terminal-server-connections.aspx
http://blogs.msdn.com/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx
http://blogs.msdn.com/rds/archive/2009/06/05/publishing-in-windows-server-2008-r2.aspx
http://blogs.technet.com/pfe-ireland/archive/2008/09/05/windows-server-2008-terminal-services-presentation-virtualisation-and-windows-xp-clients.aspx
I hope this help you in your troubleshooting.
Brian

Audio service hangs on Windows Server 2008R2 with Remote Desktop Services

Hello!
I have some terminal servers on Windows Server 2008R2. Users have the ability to use web browsers (IE, Firefox) with the included Flash Player, IM clients / Internet
telephony (Skype, ICQ), Windows Media Player, Office, and a specific internal software (works with MS SQL). I have the following problem: the Windows audio service hangs up that leads to hangup of all programs which use it, such as: any sites in Internet with
a flash content (in all browsers), ICQ, Skype.Even logging out the session hung when tried to lose a sound. It's impossible to stop or restart service from the services.msc the service just hang with status "restarting". To stop service I terminate svchost
process. As soon as the audio service is stopped - all programs start to work correctly (certainly without a sound). This problem appeared not suddenly - periodic hangups of programs on servers were marked long ago (more than half a year), but not directly
were connected to audio service, especially there were they rather rare (on the average once a week - two) and were corrected by server reset. The error message:
Error container , type 0
Event name: AppHangXProcB1
Reply: No data
Ident CAB: 0
Problem signature:
P1: iexplore.exe
P2: 9.0.8112.16446
P3: 4fb57c8f
P4: 77c1
P5: 131200
P6: svchost.exe:AudioClientRpc
P7: 0.0.0.0
P8:
P9:
P10:
shall suggest an idea about a sound service, but in Event Viewer has no Windows Audio events.
Recently I updated Skype to the last version 6.0.66.120. Before was 4.2.35.155 because versions 5хх on Windows2008R2 with the Remote Desctop Services actually don't
work, if users at the server more than one or two. We checked the sixth version by the test machine with the terminal environment and very were delighted to its normal working capacity. However after installation of this client on production servers it appeared
that hangups of programs on servers began to occur on the average time at an o'clock in case of an average daily load (about 20 users on one server). If you have worked one or two users, problems weren't watched. Internet search led me to the support page
Skype, where the Windows 7 x64 user faced a similar problem in the fifth version of the program. But the solutions proposed by the support team does not help me. In addition, I found the advice to disable enhancements in the properties of the playback device,
but it is impossible for the "Remote Audio" device.
At the moment, on servers where I updated the Skype, I disabled the audio service. If within a reasonable time, I do not find a solution, I will have to revert
to an older version of Skype, but I would like to solve the problem completely.

Enable the Allow audio and video playback redirection Group Policy setting
To allow audio and video playback when connecting to a computer running Windows Server 2008 R2, you must enable the Allow audio and video playback redirection Group Policy setting. The Allow audio and video playback redirection Group Policy setting is located
in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection and can be configured by using either Local Group Policy Editor or the Group Policy Management
Console (GPMC).
For more information about Group Policy settings for Remote Desktop Services, see the Remote Desktop Services Technical Reference (http://go.microsoft.com/fwlink/?LinkId=138134).
Is this policy applied? Refer:
http://technet.microsoft.com/en-us/library/dd759165.aspx
Also, have you tried update the audio device driver for this terminal server?

Windows XP couldn't remote desktop Windows2012

Similar Messages

Maybe you are looking for