Windows XP Disk Stuck in Drive - Help

I finally got around to installing windows XP with Boot Camp on my Mini. Unfortunately my keyboard (wireless) does not work during set up and I cannot get past a screen in the windows set-up.
When I reboot it defaults to the windows setup disk in the drive. How can I eject this disk..
Every time I restart it starts installing windows again...

Hi Pumpkin,
sorry it didn't work for you.
Did you used Mac specific keyboard?
I just reinstalled my winXP in Parallels and used my Macally USB keyboard (made for a Mac). The keyboard should have an Eject key which is NOT usualy on PC generic keyboards. You hold the Eject right when you restart the Mini and it should eject the CD,DVD. It did for me...

Similar Messages

  • Help! Disk stuck in Drive

    I was loading some photo's onto a disk and when I went to eject the disk the CD icon turned into a folder with a circle that looks like a radiation warning it also looks just like the "Burn Folder". When you Control left click there is usually an option to eject...its not there. I tried to eject with the button on the keyboard....nothing. Tried turning off the computer, that didn't help either.
    Can anyone tell me how I might eject the disk stuck in my drive?
    Thanks

    You can get another way also...
    On your main hard drive, dig down into System > Library > CoreServices > Menu Extras. Inside that window, double-click on the icon called Eject.menu.
    http://www.creativetechs.com/tips/quicktips_51.html
    You'll now have an Eject Icon in the Menubar.

  • HELP! iBook G4 won't start, disk stuck in drive.

    My iBook G4 was shutdown while a CD game was running. Now the computer only turns on to a blue screen and the eject button won't respond. The only thing the apple store ever tells anyone is to buy a new computer, but I want to see if i can salvage this one. HELP?
    iBook G4    

    Hello,
    Well I am pretty sure I can help you remove the disk from the drive, but unsure that your iBook G4 will run properly again. Try the following to remove the disk:
    1) Power off, press and hold down the trackpad button, power on and wait. Report back exactly what happened.
    2) Power off, power on holding down these keys at the same time (apple, option, o, f) type the following in when/if you see a white screen with black text:
    eject cd
    Now, type in "mac-boot", just like that but with no quotation marks and it will now boot.
    Sounds like you have an iBook G4 with a logic board failure, but I could be wrong. I hope this help you. Best of luck.
    Jason

  • Is there an emergency eject hole on the newer iMacs. disk stuck in drive and computer won't boot.

    Is there an emergency eject hole on the newer iMacs? I have a disk stuck in the drive and the computer won't boot. Need to get this disk out to load repair disk.

    If you are getting nothing at all you should take it in for repairs.

  • Eject~NOT (3 days) cd/dvd stuck internal drive -HELP ME PLEASE

    I have what was a blank CD that I burned my System Preferences onto and then tried eject. The CD is stuck in my internal CD/DVD area in my MacBookPro.  I am running OS X.5.  I have tried everything but the knife.  All keyboard tricks, held mouse button down at restart.  Beat my trackpad up hitting so hard on restart, command E, eject button, etc.  Opened every app possible and chose eject from there, ipod, realtime, the icon of the cd on the dock, in finder, in DISK UTILITY.  Then, I recently noticed that the "Disable Owner" box is checked in Sharing & Permisions when I go to Get Info (it is odd, since I am the only one who has access to my computer and nobody else could possibly have hacked in 'cause it's a mac, right? Ha!).  Cannot unlock the lock and can't get access to this finder window at all and change.  Added another admin ~ that ony logs ownership in as that user and still cannot chage privileges.   Tried using eject command in Terminal.  Didn't work either.   When I go to Disk Util, I have my main hardrive, then my journaled which is in Partition 3, then there's a cd icon that is HL-DT-ST DVDRW GWA408M Media in Partition 0:
    Partition Map Scheme :           CD Partition Scheme
              Disk Identifier :           disk1
              Device Name :           HL-DT-ST DVDRW GWA4080M Media
              Connection Bus :           ATA
              Connection Type :           Internal
              Connection ID :           Device 0
              Device Tree :           /PCI0@0/PATA@1F,1/PRID@0/@0:0
              Total Capacity :           2.1 MB (2,187,360 Bytes)
              Disk Number :           1
              Partition Number :           0
              Burn Support :           Apple Shipping
              Entry Path :           disk1
              Writes CD :           Yes
              Writes DVD :           Yes
              Media is present :           Yes
              Media is busy :           No
              Media Type :           CD-ROM
              Media is blank :           No
              Media is appendable :           No
              Media is overwritable :           No
              Media is erasable :           No
              Media is reserved :           No
              Capabilities :           Click for more information
    Under that is an cd icon that is Session 1 and that's in Partition 1.
    Name : Session 1
              Type :           Session
              Disk Identifier :           disk1s1
              Media Name :           Untitled 1
              Media Type :           Generic
              Connection Bus :           ATA
              Locked :           Yes
              Writable :           No
              Ejectable :           Yes
              Mac OS 9 Drivers Installed :           No
              CDROM :           Yes
              Capacity :           1.8 MB (1,904,640 Bytes)
              Disk Number :           1
              Partition Number :           1
    Under that is a cd icon that is:
    Name : cats stuff 10.21.11
              Type :           Volume
              Disk Identifier :           disk1s1s2
              Mount Point :           /Volumes/cats stuff 10.21.11
              File System :           Mac OS Extended
              Connection Bus :           ATA
              Device Tree :           IODeviceTree:/PCI0@0/PATA@1F,1/PRID@0
              Writable :           No
              Universal Unique Identifier :           B2D8D86C-63F6-310A-AA5C-6550836C2449
              Capacity :           716 KB (733,184 Bytes)
              Used :           716 KB (733,184 Bytes)
              Number of Files :           26
              Number of Folders :           7
              Owners Enabled :           No
              Can Turn Owners Off :           Yes
              Can Be Formatted :           Yes
              Bootable :           Yes
              Supports Journaling :           Yes
              Journaled :           No
              Disk Number :           1
              Partition Number :           2
    Is that the problem as well?  How the **** did this happen?   I am going to rip my hair out of my head if someone cannot help me.  Thanks. 
    p.s. I do not have an external hardrive.  I am out of work and can't afford the expense right now.

    Hey, nevermind.  Tried and true keep looking and you will find the answer.  The cd/dvd dev i have is from 2006, so internal no buttons, no pins.  For some reason, device has stopped reading DVD and CD's.  Worked the other day when it burned.  Turned machine off for 3 hours.  After turning back on, b4 logging in, hit the eject button.  Lo & behold, disk came out. 

  • Windows 7 x64 on G6230 driver help(camdriver)

    we just installed x64 windows seven on our lenovo g230 but we're having problems installing the camera drivers and energy management...we used the vista cd driver that came along with the unit(all the drivers work well except those two)
    need help in here T_T..i also downloaded vista drivers on Lenovo but still doesnt work..hope someone help me in this..

    we have the same problem but worsst... graphics drivers not complete, printer driver and bluetooth having problems.............. pleassssssssssssse neeeeeeeeeddddddddddddd help

  • Windows 8 Wi-Fi adapter, driver help?

    Well, i have recently updated my OS to Windows 8 and my WiFi Stopped working. I have tried 3 diffrent WiFi Adpters that works with windows 8.1(same os as me), but it just wont work. A advisor said that i should ask for the drivers for my PC for my new OS, he said that it could be possible BIOS that needed to get updated. I dont know but i really need help ;(! When i tried with the lastest WiFi Adapter (got one by HP, One by Linkey and one by Netgear) That are from netgear so did it get stuck on detecting device! Please help and sorry for my bad english! (I got an Pavilion a6023.sc, Win 8.1, 64-Bit)

    I dont know if its allowed to bump, but i really need help, and sorry if it's against the rules ;(

  • IMac Aluminum (intel-based) - Stuck in restart and disk stuck in drive.

    I've recently been having some issues with my new iMac (purchased in April of 2008).
    First, I inserted an MP3 disk with actual files on it which was created on a PC and (1) have not been able to access the disc, (2) not been able to eject the disk (and have read all post pertaining too) and (3)the disk remains as an icon on my desktop.
    Second, and in my view a result of the stuck disk, the computer gets stuck when I ask it to restart. It will wipe all icons from the screen, and remain just with my desktop background for hours. None of the keyboard commands work, the mouse still moves, but it seems to be stuck before turning off and restarting.
    The above two problems have now been going on for the better part of 3 weeks.
    If anyone has had this problem, can give advice or answers it would GREATLY APPRECIATED and save me a trip to the genius bar. Please help!
    Ryan

    I'd go ahead and force a shut-down by holding the power button down. I've had to do that a couple of times myself for one reason or another and have not had problems as a result.
    Once it's shut down wait a few moments and start it back up while holding down the mouse button. I'll bet that this will work for you.
    Rick

  • White screen on attempted restart plus disk stuck in drive

    I had to restart my iMac after uninstalling a piece of software. On the attempted restart all I get is a white screen after the usual Apple sound. I did try to restart using what I thought was the system disk, but unfortunately I inserted the Snow Leopard disk by mistake and not the system disk (entirely my fault). I now have two problems - white screen on restart and a stuck disk. I have tried holding down the mouse key, the shift key and the "C" key repeatedly but none of them work. Appreciate any suggestions.

    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

  • Disk stuck in drive, MBP won't start up!

    Yesterday, i was burning a CD in iPhoto, but i realized that i had only selected 1 photo to burn. I tried to force quit iPhoto, but this froze the computer. I shut it down, rebooted, and the apple logo would not show up at startup! I tried ejecting the disk by holding the mouse (as the manual directs), but to no avail. I cannot even get my MBP to start up! Help! Please?

    Ahhhhh! I had the same experience lately. Scouring through these forums I found one individual "solved" their problem by using a library card. Seems that, if you ever so gently insert the card into your front slot, before start up, and press the card upon the top surface of the cd... in order to slow it down a tad... it forces the cd to eject. I had this happen and did the procedure mentioned above and it honestly worked! All the other tricks of the trade were fruitless. I've had a PB and never encountered this in the past.

  • Mac Mini stuck looking for Windows Boot Disk! Please help

    Hi all, I've been running Leopard on my Mac Mini off a FireWire hard drive enclosure. The 750gb hard drive in the enclosure is a drive I used to have in my old iMac.
    When I had my iMac I'd installed Windows via Bootcamp. So when running, the Mac Mini would show a Windows partition on the Leopard desktop. Today I needed to do something in Windows. so I went to Sys Prefs > Startup Disk and chose to reboot into that Windows partition. BIG MISTAKE
    Now whenever I turn the Mini on it looks for a Windows partition and tells me it can't find one. I've tried resetting the PMU, booting from Leopard DVD, holding Option, nothing works. The only thing that will work is if I put a Windows XP disk in and it will try and take me through the install process.
    How on earth do I get my Mac back booting into Leopard!?
    Message was edited by: Thomas Robinson

    I can't believe it was just the new Apple thin Alu Keyboard causing it! Plugged in an old Apple USB one and I got the Option startup menu straight away, totally bizarre!

  • Windows- No Disk error, HELP!

    I have an ipod shuffle and when I connect it to the USB port, it loads up fine on itunes. Then as the music is synching, I get an error message that comes up reading "Windows-No Disk Exception Processing Message (then a whole bunch of numbers and letters). There are three options to cancel, try again or continue. Clicking any of the options does not help and only causes the error message to return.
    I have tried the r's, and tried restoring the shuffle twice now. While the restore did allow for the music to start synching (whereas at first it wouldn't even let that happen), it eventually resulted in the same error message.
    This is driving me crazy and making me so frustrated. When I first used it probably a month ago, it uploaded music fine. I don't understand where this sudden problem has come from. I read somewhere there could be software on my computer scanning the device which might be causing a problem, but I pulled up my running programs and there's nothing open other than a few programs, none of which are virus scanning software.
    Help would be greatly appreciated since right now this product is pretty much useless. So much for apple products being so "trouble free."

    I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
    I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
    I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
    I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

  • Windows - No Disk Error - Please help!

    Windows - No Disk Error - Please help!
    Hi,
    I have the following set up:
    * Lenovo T-61p
    * Windows XP Pro, SP 3
    * HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
    I am getting the following error:
    Windows - No Disk
    Exception Processing Message 0xc0000013 Parameters 0x75CE023C
    0x84C40C84 0x75CE023C
    I have done a lof experimenting and thru process of  elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
    I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in.  In my case, this is drive E.  I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
    I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
    A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
    I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
    Anyone every any better, more permanent solutions?  Or know what the real root of the problem is?  What is scanning all the drives and being showing an error message because it found an empty drive?
    Thanks and Happy Holidays/New Year!

    I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
    I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
    I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
    I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

  • Windows Error Msg when using Itunes - "There is no disk in the drive. "

    Hi there -
    Desperately seeking help before I lose my mind !
    Whenever I try to do anything in iTunes I get the Windows windows error message "WINDOWS - NO DISK. There is no disk in the drive. Please insert a disk into drive ." with the options to either CANCEL, TRY AGAIN or CONTINUE.
    Regardless of which of the options I select, the error message re-appears & will not close.
    I try CTRLALTDEL but I get the message Itunes is "not responding".
    I have tried:
    - Updating iTunes software
    - Making sure I have the latest Windows Updates
    - Uninstalling and reinstalling iTunes
    - Selective start-up where I disable all applications which might be clashing with iTunes
    - clearing the menu in QuickTime
    None of these work
    Any ideas ?
    Thanks -
    HP Pavillion   Windows XP  

    I am wondering if you ever got this problem straightened out, or if anyone else knows the solution to this problem. I am receiving the exact same message as you talk about receiving here:
    "WINDOWS - NO DISK. There is no disk in the drive. Please insert a disk into drive ."
    No drive is listed, just a "."
    I also have tried uninstalling and resinstalling iTunes many times. Not only that, but I thought it might be a virus problem of some kind, so I totally resintalled my Windows XP system. All to no avail. Even on my newly installed system I am having this problem in iTunes.
    I have found that if I hit Cancel about 80 times (literally), iTunes will finally load. But it is crazy that anyone should have to go throug this each time he loads the iTunes program.
    Someone posted a link to a Microsoft fix for a similar problem, but I was unable to understand the fix, and the problem listed in the fix did not seem to correspond with the problem we're having.
    If anyone knows the solution to this problem and is able to give instructions for the solution, I would really appreciate it! I would just use an alternative mp3 player to iTunes at this point if I could, but that isn't really feasible since I have an iPod.

  • Windows No Disk There is no disk in the drive. Please insert a disk......

    Help! Just recently this message window has been appearing everytime I open up iTunes:
    Windows No Disk
    There is no disk in the drive. Please insert a disk into drive.
    iTunes was humming along nicely for over a year with no problems. All of a sudden this message keeps popping up. I can still use iTunes to its full capacity, but this annoying little window is beginning to push my blood pressure up.
    Has anyone else experienced this problem?
    Thanks

    Any thoughts?
    all manner of thoughts. some might even be relevant to the matter at hand ...
    okay, back in the days of new itunes 6.0.0.18 and 6.0.1.3 installs, we used to sometimes get reports of Windows asking for all sorts of disks when people tried to launch itunes after an upgrade. (sometimes it would be like your message, sometimes it would be asking for a specific disk with no apparent connection to itunes.) i never did manage to work out what precisely was going on with it. my best guess was that the installation scripts in the itunes installers (or QT 7.0.3 installers) were sometimes activating other installation routines for other programs. (i've seen your message show up before when i've tried installing other software on my PC from a disk.) whatever it was, it seemed to stop happening to people from itunes 6.0.2.23 (and QT 7.0.4) onwards.
    i was wondering if we had an even weirder version of that going on with your message (only it started happening after an install of a different package). that's why i was checking up on the version number of your itunes before.
    assuming for the moment that you do have an itunes 6.0.0.18 or 6.0.1.3 in there, we might as well try something that could fix the version of the message that you're getting. sometimes if people put a CD (an audio CD is fine) into the disk drive prior to launching their itunes, they wouldn't get that message. sometimes, they wouldn't get that message ever again even if in future launches they didn't have a CD in the drive.
    if no joy with that (and you're currently at 6.0.0.18 or 6.0.1.3), we might try an upgrade to 6.0.4.2 (working on the principle that we haven't seen this often if at all since 6.0.2.23 came out, and 6.0.4.2 is more stable and/or more readily available than 6.0.2.23 or 6.0.3.5).
    keep us posted.
    love, b

Maybe you are looking for

  • HT2311 How do I install a previous version of iTunes for MacBook Pro?

    i'm trying to help out my friend who has recently purchased an old MacBook Pro ... he has a 2007 MacBook pro and everything works - done all updates etc ... BUT! (theres always a but isnt there ... ) I cant update the latest iTunes because the softwa

  • Special G/L posting to one-time account is not defined Message no. F5265

    hi, Special G/L posting to one-time account is not defined Message no. F5265 the above message is displaying when tried to post for one time customer. where  to check this in configuration level. what are the tcodes , please let me know. actually i a

  • ALV in Webdynpro ABAP

    Hi, When ALV is in edit mode, there are four default actions (buttons) in the toolbar of ALV - 'Check', 'Append row', 'Insert row' and 'Delete row'. I just want to know that when 'Append row' is clicked, Which event is triggered. I need this to set s

  • Ipod updater, i really need some help can no body help?

    Everything seems to be working except for the fact that my ipod won't synch with itunes, it keeps saying this ipod needs updating. The problem seems to be that when i load the updater to update my ipod it freezes then falls over. I have reinstalled m

  • How to Troubleshoot the Connection Pool Exception?

    Dear Oracle Gurus, very good afternoon to you. I'm looking forward for some tips/troubleshoting guide to escape from the below exception, that occres very frequently to one of application that 100+ users will login from different locations & work on