Windows XP Embedded Driver

What are these drivers for? They are here http://www.viaarena.com/?PageID=110. I want to know about Parts D & E. Bas, please help!

Wonkanoby: the link is dead but the site is not :D
When you type "www.viaarena.com ", you will land at the frontpage and you can go to all the other pages from there ...

Similar Messages

NI DAQmx 14.2 and Windows 7 embedded

Hello,
I try to install an application using labview 2014 with an acquisition device NI USB-6251 on a Windows 7 platform brand new embedded.
The problem is it seems the installer refuses to install DAQmx 14.2 on this machine, I just get the following messages:
(See the images below)
Whenever I confirm Insatallation to continue to the end.
When the PC is restarted, the NI USB-6251 device is not recognized either by windows or by MAX. (Not valid drivers)
I transferred the driver manually (nixsrkw.sys) of a PC that works with the device in the path I indicates the installer plug and play windows (Windows / system32 / drivers), without success! (No valid driver)
I tried several installer configuration, nothing happens, I have to wonder if NI DAQmx14.2 is compatible with Windows 7 Embedded ...
Thank you for helping me a bit if you have already encountered this kind of problem, I do not understand what blocks the installation of the USB driver.
Sorry for my poor English
Greetings to all.
Lionel
Attachments:
AFL-W07A_Pb_Install_00.png ‏28 KB
AFL-W07A_Pb_Install_01.png ‏29 KB
AFL-W07A_Pb_Install_02.png ‏29 KB

Hello Miello,
Thank you for your answer, I just tried the "run as Admin ..." with the right button, with the same problem in the end.
It is true that this manipulation is not well documented in Windows 7.
I'll try the same installer with a machine running Windows XP embedded, I'll let you know.
If the installation succeeded this clearly show that the problem is on the Windows 7 side, otherwise the problem is in the application builder or modules ...
To be continued ...

Installing LabVIEW DSC 8.6 Run Time on Windows XP Embedded flash memory

I'm trying to install LabVIEW DSC 8.6 Run Time on an embedded PC running Windows XP Embedded. This has a small local disk (c), so I would like to install DSC Run Time on a secondary flash memory drive (d). The installer tells me that I don't have enough free space on drive c, but I cannot browse to select drive d. What do I need to do to get this installed?
Thanks,
Josh

The DSC module can't easily be installed to external flash memory. You'll want to move any extra data onto the flash drive to free up space on the internal memory for installing the DSC module.
Mark E.
National Instruments
Schedule a Free 1-Hour online LabVIEW Tutorial with an NI Applications Engineer

Is it possible to bypass Domain Controller Promotion (dcpromo) Hard Drive Check? My Server has an embedded drive instead of a SATA port. (emmc)

I have a small computer with just an embedded drive instead of a sata port. It seemed perfect for a small domain controller, since it has 32G's which is more than enough space, and with a gigabit Ethernet, and 1.6Ghz dual core cpu, seemed more than enough
for what I needed.
Windows 2012, or Windows Server Technical Preview, both install fine on it, but when I run dcpromo to create the domain It fails on selecting the location for files. The error is that the path is not a hard drive. The machine only has USB ports so I can't
add a SATA drive just to store these logs/configs, even if I wanted to.
The actual computer I was trying to use: http://www.ecs.com.tw/LIVA/
Thanks for any help.

On the Windows Server Technical Preview,
Install-ADDSForest -SkipPreChecks -DomainName DOMAIN.CONTOSO.COM -DomainMode Win2008 -ForestMode Win2008R2 –DatabasePath "C:\Windows\NTDS" –SYSVOLPath "C:\Windows\NTDS" –LogPath "C:\Windows\NTDS\Logs"
gives me the error "No NTFS 5 drives exit." (note exit, not exist)
I'll reinstalling windows 2012 and see if I get a different message there.
This was just a standard install, so the drive is definitely NTFS.

Windows XP Embedded

I am planning on using Windows XP Embedded for my first time. The system
will have to boot off a CD-ROM and cannot have a hard drive. It will run a
LabVIEW executable that mostly communicates via TCP/IP to several computers.
There may also be a GPIB card installed in the computer to collect data from
an oscilloscope. Does anyone have any advice or recommendations for my
project? Can anyone point to any good information that might be of use? I
was able to find some information about Windows NT Embedded at
http://zone.ni.com but I couldn't find anything about Windows XP Embedded.
Neal Pederson, President, VI Control Systems
1923 Mendius Lane, Los Alamos, NM 87544
TEL: (505) 662-1461, FAX: (866) 422-2931
[email protected], www.vicontrols.com

Good advice also...
I should check it out as well...
I don't know about making an XP guy out of me.. )

LabVIEW 8 & Windows XP Embedded?

We have
a system running XP Embedded and I would like to run a compiled LV8 application on it.
It requires one of the DAQCards (1200) to gather data. I guess I'm just not sure
how this will all fit on the system. Traditional NI-DAQ 7.4.1 is a
386MB zip file. The LV8 Run-Time install is 85.4MB, although there is a 24MB reduced functionality download. Is there anyway
of reducing the size of these installs? I don't need to support every
single card NI makes - just the card for my system. Any ideas from
those that have done this?
Thanks!

Hi Derek,
You will need to use Traditional DAQ version 6.9.3 (instead of version 7.4.1) because that is the last Traditional DAQ driver that supports the DAQCard-1200. This is actually helpful in your situation because the EXE installer of Traditional DAQ 6.9.3 is significantly smaller at 62.3 MB.
How Do I Use Older Versions of NI-DAQ (6.9.3) with LabVIEW 7.x or 8.0?
http://digital.ni.com/public.nsf/websearch/F185E098C7EC5A3486256D2E00691BB2?OpenDocument
Traditional NI-DAQ Version 6.9.3 Download
http://digital.ni.com/softlib.nsf/websearch/50F49E43A22C0D2186256BF3006B9A96?opendocument&node=13207...
We do not have individual DAQ drivers for each individual DAQ card, so there is no way to reduce the size of the DAQ drivers going that route.
I also want to warn you that National Instruments does not officially support Windows XP Embedded, since it has not been tested.
Hope this helps!
Allen
National Instruments

Firefox will not download on my neoware m1000 windows xp embedded laptop

Firefox will not correctly install on my neoware m100 notebook, os is windows xp embedded and citrix. i have tried downloading and received an error corrupted file message or it just ends at extracting files
== This happened ==
Every time Firefox opened
== i tried downloading and installing firefox yesterday and today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)

I had this same problem on a Wyse V90LE Thin-Client running XPe. It ended up that my TEMP & TMP environment variables were set to Z: which was a 30MB RAMDRIVE.
You might try changing your TEMP & TMP environment variables to some drive that has plenty of space. (100 MB did it for me) Go to CONTROL PANEL > SYSTEM > ADVANCED TAB > ENVIRONMENT VARIABLES BUTTON and change the value of both TEMP & TMP.
Hope this helps!

HP Photosmart C3180 through USB won't connect (Windows 8 Embedded)

We have an HP Photosmart C3180 which works fine on either a laptop or other pc's with Windows 7, however when we try to install it on a Thin-client which has Windows 8 Embedded it can't find the printer when we use the installer package from the HP site. (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110014-2&cc=us&dlc=en&lc=en...
The installer will show the message to plug in the USB cable into the pc, but when we do it shows the connection is established but then after about 6 minutes it will fail. In the device manager we do get the printer shown as Other Device and shows that it needs to update its driver. (which wont work.)
I tried to manually add the driver after extracting the installer file but none of the inf. files allow me to install the correct driver. Or at least, thats what windows tells me
Is Windows 8 embedded not supported?

Hi @SHS_NL
I suspect your question would be better answered in the HP Enterprise Business Community, as Windows Embedded 8 Standard is a modular operating system designed for Enterprise use.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
I don;t know if this would help at all but it is the best I can offer; Windows Embedded 8 Standard
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Installing Windows t Embedded 7 onto SD Card / Performance

Hello,
I am currently testing a Windows 7 Embedded installation using the IBW 64bit toolkit onto a 16GB high speed SD card in a Dell Poweredge R520 server.
The installation process goes through fine after enabling SD Boot and the enhanced write filter options.
My question is around performance and process, and if I am doing the right thing to speed up the process as eventually I will take a golden image of this and want to deploy via WDS. A slow down in performance is to be expected I guess, the SD card supports
100MB/s read and 65MB/s write speeds.
I've read about building the image on a external USB disk first then transferring to the SD card after, has anyone done this and can verify? Am I following the best process and using the best SD cards for this type of environment?
Thanks

This forum is for PSOReady. The WES 7 forum is over here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=quebeccomponentsforum
You could use ICE to create a custom IBW disk, cut down the features, and automate the build process. This custom IBW disk can be installed via USB. It is good to see SD card boots, but other media like SSD SATA drive would be faster in performance.
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Hyper-V windows 7 embedded standard VHD install integration services not working

My existing VM (windows 7 embedded standard) is not letting me install integration services. Has anyone been able to do it, is there somewhere I can find this "integration disk" that will install this on this windows 7 edition? The current integration
disk does not support windows embedded standard.

You are correct, there is no support for Embedded.
The drivers would need to be incorporated into the image, just like any other drivers. However, you cannot get driver installation files like you can with 3rd parties.
In this case, the drivers are essentially becoming part of the kernel itself.
I don't know about embedded 8 or 8.1 either.
The better place to ask would be in the Windows Embedded forums on MSDN.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Installing Adobe AIR on Windows XP Embedded

Hello,
I'm working at a museum using kiosk type clients running Adobe AIR. One type of thin clients we're using is running Windows XP Embedded. I've tried installing standard Adobe AIR on it via web, but it keeps failing. Is there some way to get Adobe AIR up and running on the Embedded version of XP?

Any official word on this? It seems Flash Player is supported

Installing Latest Firefox on Windows XP Embedded gives error: "This application has failed to start because pdh.dll was not found"

I'm trying to install the latest (standards-based) browser I can on on old Windows XP Embedded computer. The computer's hardware does not meet the "Recommended Hardware" of a Pentium 4 (it has a P3). I initially tried installing/running Firefox version 28, and that seemed to work fine. Version 36 gives the error I stated in the question. It's not paramount that I run the *latest* version of Firefox (the browser is ONLY used for an intranet application), but I'd like to install the latest version that will run, and if there's a simple fix for this version, I'd like to explore that.
Regards,
Gerrat

Well, I was pretty sure it didn't have malware. It was running a steady state - like program & we have dozens of these on our network (but not on our domain). We have a corporate anti-virus (Sophos) running on all the computers on our domain, and there are no notifications of anything suspicious coming from these units.
Just to be sure I installed and ran an antivirus scan against it though - as suspected, nothing suspicious found.
As I mentioned, FF 28 runs fine, it's just the latest (36.0) that doesn't run (I haven't tested any versions in between). Either seems to install without hitch, but when the latest version is run, it gives the error about the missing dll.
Regards,
Gerrat

Using an embedded driver instead of client, and refreshing JList

I am finishing up a simple database interface program that I need to do in order to graduate. There are a couple issues I need to address.
1. This program is meant to be on one computer with one connection to a database. Currently, when I build the program and run the .jar file, it will not work unless I have manually started the server in Netbeans. Once the server is on, it works like a champ. But since I have to send this to my professor it must work without him doing any additional setup. For this I figured I could use the embeddedDriver, but unfortantely I cant get that to work.
In netbeans I can right click on the main database icon and select "New Connection" and i have the option of choosing the embedded driver yet when i put the database name in and the user and password it gives me the
error: "Unable to add connection. Cannot establish a connection to jdbc:derby:MaxxTrax using org.apache.derby.jdbc.EmbeddedDriver (Database 'MaxxTrax' not found).
Why is it that I can use the client driver without a problem yet not the embedded one? And if I cant use the embedded one, how can I set up the client driver so it will automatically start the server (does the end user need to have the server installed or will the clean and build do that)?
2. Using the netbeans gui builder, i created a jList that I bound to my database's name query. I then have multiple textFields that i bound to whatever jList selection there is and tell it to update with the specified data. My problem is, that I cannot get the jList to "refresh". Right now when I add somebody to the database it visually writes over another persons record, but doesn't actually delete record. So if i could just figure out how to make it look at the database again I could do it automatically after entering in a new record. I've tried nameList.validate(), updateUI() and even tried to copy the ide generated code that actually binds the data but no go.
Once I get these two little things taken care of I am done!! Please help, its greatly appreciated.

I'm not getting much help out there.....anyone??
I need to make the database seem invisible to the end user application.
When I try to use an embedded driver I keep getting errors. In netbeans, I can see the "Java DB(Embedded)" link under drivers, and when I hit connect using.. I input all the correct data and it gives me the following error:
Error: Unable to add connection. Cannot establish a connection to jdbc:derby:MaxxTrax using org.apache.derby.jdbc.EmbeddedDriver (Database 'MaxxTrax' not found).
Under the Database setting the pointer for the java db installation and database location are correct. Why can't I connect using the embedded driver, cause using that would make my life so much easier for a single application.

Not possible to run CodedUI tests on Windows 7 embedded

Hi all,
I am trying to get my CodedUI tests running on the target machine with Windows 7 Embedded.
For that, I installed on the target machine:
Visual Studio 2010 Test Agent
VS2010 SP1
Next I try to run the CodedUI test from the command line using mstest.exe (since no Visual Studio may be installed on target
machine). However, before even executing the first line of code in my test, mstest fails after showing a popup window with following message:
"the ordinal 459 could not be located in the dynamic link library urlmon.dll"
When looking in the detailed logs of QTAgent32.exe I see a 'System.BadImageFormatException' thrown by the PluginManager of CodedUI when trying to
start an Internet Explorer plugin. See detailed stacktrace below this message.
This might be caused by the fact that this Windows Embedded installation does not contain Internet Explorer (for security reasons). The CodedUI test
and application under test however do not need Internet Explorer at all, the application is a WPF application.
So, my questions:
- Does anyone know how to get rid of this error without installing Internet Explorer?
- Any ways to prevent MsTest.exe to start the IE extension for a CodedUI test?
Some things I tried already but did not bring success:
- Run a completely empty CodedUI test; it triggers the same error.
- Remove IE extensions from C:\Program Files (x86)\Common Files\Microsoft Shared\VSTT\10.0
- Remove unneeded things (datacollectors) from MsTestSettings file.
Any help/ideas appreciated!
Jan Lavrijsen
Complete stack trace:
Agent: adapter run thread for test 'CutPowerDuringImport' with id 'b7c688eb-89ac-4654-b638-a5699f579871'
»DebugInfo
»Trace »FirstChanceException
»FirstChanceException 'Microsoft' causing 'System.BadImageFormatException' - Retrieving the COM class factory for component with CLSID {25336920-03F9-11CF-8FD0-00AA00686F13} failed due to the following error: 800700b6 The operating system
cannot run . (Exception from HRESULT: 0x800700B6).
»[CausedBy=Microsoft],[FirstChanceException=System.BadImageFormatException],[Count=1]
»CallStack: at Microsoft.VisualStudio.TestTools.UITest.Extension.IE.IETestPlugin.StartSession(System.Boolean recordingSession) [IL: 0x19][Native: 0x4B]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestPluginManager.StartSession(System.Boolean recordingSession) [IL: 0x2B][Native: 0x95]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestService.StartSession(System.Boolean recordingSession) [IL: 0x34][Native: 0xA9]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.StartSession() [IL: 0x37][Native: 0x6C]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.Initialize() [IL: 0xB5][Native: 0x163]
at Microsoft.VisualStudio.TestTools.UITesting.CodedUITestExtensionExecution.BeforeTestInitialize(System.Object sender,Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs e) [IL: 0x3C][Native: 0x76]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecution.RaiseBeforeTestInitialize(Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs args) [IL: 0x15][Native: 0x17]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.RunInitializeMethod() [IL: 0x3E][Native: 0x96]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.ExecuteTest() [IL: 0x8D][Native: 0x113]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.Execute(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestResult result) [IL: 0x46][Native: 0xD1]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.ExecuteSingleTest(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter executer,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext
testContext,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestAdapterContext userContext,System.Boolean isLoadTest) [IL: 0x27][Native: 0x55]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.Run(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext testContext,System.Boolean isLoadTest,System.Boolean
useMultipleCpus) [IL: 0x109][Native: 0x32B]

Hi Jan,
Thanks for your response:)
I think it is a good feedback for this issue, but as far I know, it is by design now, we need to use the IE extension for test projects. My understanding is that it would find the accordant UI Test Controls with your app UI controls, so it would search all
test controls include the IE controls, and then use one real UITestControl to instantiate an object which is equal to the real UI control, so we could playback the recorded action.
WinButton uICloseButton = this.UISnippingToolWindow.UISnippingToolTitleBar.UICloseButton;
But I think you can submit this feedback to Microsoft Connect feedback portal:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,maybe
Microsoft engineers will share us a more plausible explanation.
Thanks for your understanding.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC

Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC
It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
Thanks in advance
This question was solved.
View Solution.

Hi:
Try this Intel chipset driver...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng
If the auto install file doesn't work, download and unzip the second file listed (zip file).
Go to the device manager and click on the smbus controller needing drivers, click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that was created when you unzipped the file.
Make sure the Include Subfolders box is checked and see if the driver installs that way.
For the mouse pointer problem try reinstalling the touchpad drivers.

Windows XP Embedded Driver

Similar Messages

Maybe you are looking for