Windows XP from Microsoft's Virtual PC

I have just ordered a new 24" iMac, 2.8 ghz machine. I have a need to do a few things in a windows environment. My older Macs have Microsofts Virtual PC installed running the copy of Windows XP professional that came with the original program. Can I install Windows from this disk or do I need to buy a new copy of windows? I have seen references to Service Pack 2. I know that that while service pack 2 may be resident on the windows disk it was installed after the original installation of windows. Advice on this topic would be greatly appreciated.

Hi Doug,
it is indeed technically possible to use the Windows XP from Virtual PC.
See here for procedure: http://www.macosxhints.com/article.php?story=20060527175405403
But keep in mind that the Windows License does not allow you to use one Windows XP on two or more computers.
And because of the Activation Process of XP they will find out...
Good Luck
Stefan

Similar Messages

  • Satellite L300 - Can I purchase Windows 7 from Microsoft

    My Satellite L300 came with Vista Home Premium. I formatted the drive and installed Windows XP to enable me to run a software not compatible with Vista.
    Now Windows wants me to activate the OS.
    I now want to purchase Windows 7 from Microsoft.
    Will I be able to install Windows 7? or will the Vista product key tied to the system reject the installation?

    > Will I be able to install Windows 7?
    Definitely. Ive installed Win7 32bit on friends L300 and it works perfectly. Much better than Vista.
    For Win7 activation you need valid product key that you can get from Microsoft. Vista key placed at the sticker will not help you at all.

  • Downloaded legitimate copy of Windows 7 from Microsoft...

    I know I need to install Windows 7 from Bootcamp. I used to have Vista on it, but have gotten rid of that now. I upgraded to 8 gigs of ram, so now I have to install 64 bit for Windows. No matter how I copy Windows to a dvd to use in Bootcamp, it can't find the dvd. I have seen that there are files from the dvd in Finder. Is it impossible to upload a "copied" dvd, and do I have to wait for Microsoft to mail me their backup? ...or is there something I'm doing wrong?
    Thanks in advance!

    Well, I went and purchased 2 other brands of dvd, but neither one of them are burning, either. That totals 4 different brands. I've reinstalled Windows Vista till I get the Windows 7 dvd in the snailmail. Can't believe I've been through HOURS for absolutely nothing but reinstalling what I had in the first place, only to wait around 3 weeks till I get the actual dvd. Lesson learned. Get the original software straight from the manufacturer in the first place!
    Anyway, has anyone else had a problem with burning a dvd, when a cd will burn no problem, and it reads dvds and cds no problem?

  • Re: I've lost windows key from Microsoft sticker

    I have lost my windows key, which was written at the back of my laptop.
    Actually it is not visible now as the maptop is more than a year old now.
    Is there anyway I could refind it?

    There are at least 3 posts on this forum including myself) about the successful re-installation of W7 using the laptops OEM key and a retail W7 DVD. This link [http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-7-oem-key-with-a-non-oem-disc/7788dfa2-94a7-4db3-8bcd-b0e109bd7b95] is the first one I found from a semi official source where a moderator of a Microsoft owned forum Carey Frisch states:
    "Yes, you can use a regular Windows 7 retail DVD and a genuine Windows 7 OEM product key to perform a "clean install"> However, when it comes time to perform product activation, you'll need to use the "activate by phone" method." and at that point the 42 character key the laptop generates and you have to key in will no doubt tell microsoft that this is an an install on a machine with OEM Windows 7 (version) installed at sale.
    The above doesn't apply to XP . There are programs like keyfinder thing3.exe that will display the installed W7 key and mine does match the OEM key on the laptop

  • Can I install Windows 7 from an SD card on my 2011 Macbook Air 13"?

    This morning I purchased a digital copy of Windows 7 from Microsoft, and created a bootable SD card for installing the operating system.  My problem is that Boot Camp Assistant will not allow me to partition the drive without the install media present.  The install media is present, but because it is not in the form of a USB drive, it does not detect it.  I'm wary of manually partitioning the drive using Disk Utility, is there a way I can trick it into thinking I have a USB plugged in?  I don't have any USB drives big enough to install Windows 7 from and I don't look forward to having to drive to the store and pay for a USB stick I'll use once.  Thanks in advance.
    -Aaron

    Windows must be installed from a DVD in the internal optical drive. Burn your digital image to a DVD using Disk Utility, Toast, or similar utility. You can also use the Apple external USB optical drive for the MBA.

  • Migrate Oracle EBS 12.1.3 from Microsoft Windows 2003 32-Bit to Linux

    Hi
    We are currently using Oracle EBS 12.1.3 on Microsoft Windows 2003 32-Bit. We are planning to migrate to linux. I have gone through the certification matrix and the following versions certified with Oracle EBS 12.1.3
    1. Linux x86 Oracle Linux 5
    2. Linux x86 Oracle Linux 4
    3. Linux x86 Red Hat Enterprise Linux 5
    4. Linux x86 SLES 10
    Question #
    1Q) I would like to know is there any linux freeware which is certified with Oracle EBS 12.1.3
    2Q) Also please let me know which documents I need to follow to migrate Oracle EBS 12.1.3 from Microsoft Windows to Linux

    1Q) I would like to know is there any linux freeware which is certified with Oracle EBS 12.1.3No.
    2Q) Also please let me know which documents I need to follow to migrate Oracle EBS 12.1.3 from Microsoft Windows to LinuxApplication Tier Platform Migration with Oracle E-Business Suite Release 12 [ID 438086.1]
    To migrate the database you can use export/import or transportable tablespaces -- Refer to these docs for details:
    Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1]
    Export/import process for R12 using 11gR1 or 11gR2 [ID 741818.1]
    Using Transportable Database to migrate E-Business Suite R12 Using Oracle Database 10gR2 or 11g [ID 734763.1]
    Thanks,
    Hussein

  • How do i sort out error r6034 on my windows vista when i try to start itunes, the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly,

    how do i sort out error r6034 on my windows vista when i try to start itunes ???
    the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly, P;ease contact the application's support team for more information.

    Hey deepakmenonfrompune,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • Windows 8 Mail from Microsoft setup problem

    I have a Dell tablet running Windows 8.1 Professional. I've installed the Universal ("Metro") app "Mail from Microsoft".  I've set up an IMAP account. I'm able to log in, receive and send email. But, the email address for this account
    is different than the "sync" account. But, when I go into the account setting page, I can't change the "preferred email address" field -- it's grayed out.  I'm assuming that it's the field that the controls the "from" email
    address.  Does anyone have any suggestions on how to change it?

    Hi Richard,
    How did you sync that?
    When you click the "Sync" as the screenshot below, all your new emails from your mail accounts have been synced to the Mail app. It's not sync one specific account emails.
    About "Preferred email address" settings this is only for outlook.com. Allows you to send an email using an Outlook.com alias.
    Karen Hu
    TechNet Community Support

  • Is there any way I can convert a .exe file to .iso on my MacBook Air? I'm trying to install Windows via BootCamp but the download from Microsoft is a .exe file which does me no good.

    I'm trying to install Windows 8 via Boot Camp, but the download from Microsoft is a .exe file so when I go to create the bootable USB drive, it fails. I've read some of the other threads about this topic, but I want to know if there is any way to convert to .iso without having to find someone's Windows computer to borrow. Can anyone help?

    No. You would require a PC in order to run the executable which is an installer, not a disc image or an archive.

  • Error 500 from Microsoft Remote Desktop for Mac and for iOS but not for Windows

    I am running Windows Server Standard 2012 as a basic File server and Remote Access Server.  I am able to log into to Server remotely using Windows Remote Desktop Client on Windows 7 and 8 machines without problems
    When I try to log in using outside the local network using MRD version 8.0.24308 using OS X 10.9.1 or using iOS 7.0.4, I get the following error:
    " The gateway failed to connect with the message: 500 Internal Server Error"
    I can also log in remotely WITHIN the local network on a Mac or iOS device, it works without getting an error
    Any Ideas?

    My IT person has tried all these and I still get a 500 error when I log in from Microsoft Remote Desktop 8.5.  
    Here is part of the MRD log dump (not clear where to send the log since MRD doesn't provide an address when you dump the log into email):
    [2014-Mar-27 19:48:56] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Mar-27 19:48:56] RDP (0): lo0 af=18  addr= netmask=
    [2014-Mar-27 19:48:56] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Mar-27 19:48:56] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Mar-27 19:48:56] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-27 19:48:56] RDP (0): gif0 af=18  addr= netmask=
    [2014-Mar-27 19:48:56] RDP (0): stf0 af=18  addr= netmask=
    [2014-Mar-27 19:48:56] RDP (0): en0 af=18  addr= netmask=
    [2014-Mar-27 19:48:56] RDP (0): en1 af=18  addr= netmask=
    [2014-Mar-27 19:48:56] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-27 19:48:56] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.89 netmask=255.255.255.0
    [2014-Mar-27 19:48:56] RDP (0): fw0 af=18  addr= netmask=
    [2014-Mar-27 19:48:56] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Mar-27 19:48:56] RDP (0): utun0 af=18  addr= netmask=
    [2014-Mar-27 19:48:56] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e1eb:119:5ad9:da9%utun0
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-27 19:48:56] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e1eb:119:5ad9:da9
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-27 19:48:56] RDP (0): --- END INTERFACE LIST ---
    [2014-Mar-27 19:48:56] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Mar-27 19:48:56] RDP (0): client version: 8.0.24428
    [2014-Mar-27 19:48:56] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Mar-27 19:48:56] RDP (0): Resolved '10.1.10.11' to '10.1.10.11' using NameResolveMethod_DNS(1)
    [2014-Mar-27 19:49:04] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Mar-27 19:49:04] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Mar-27 19:49:04] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Mar-27 19:49:04] RDP (0): lo0 af=18  addr= netmask=
    [2014-Mar-27 19:49:04] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Mar-27 19:49:04] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Mar-27 19:49:04] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-27 19:49:04] RDP (0): gif0 af=18  addr= netmask=
    [2014-Mar-27 19:49:04] RDP (0): stf0 af=18  addr= netmask=
    [2014-Mar-27 19:49:04] RDP (0): en0 af=18  addr= netmask=
    [2014-Mar-27 19:49:04] RDP (0): en1 af=18  addr= netmask=
    [2014-Mar-27 19:49:04] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-27 19:49:04] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.89 netmask=255.255.255.0
    [2014-Mar-27 19:49:04] RDP (0): fw0 af=18  addr= netmask=
    [2014-Mar-27 19:49:04] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Mar-27 19:49:04] RDP (0): utun0 af=18  addr= netmask=
    [2014-Mar-27 19:49:04] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e1eb:119:5ad9:da9%utun0
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-27 19:49:04] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e1eb:119:5ad9:da9
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-27 19:49:04] RDP (0): --- END INTERFACE LIST ---
    [2014-Mar-27 19:49:04] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Mar-27 19:49:04] RDP (0): client version: 8.0.24428
    [2014-Mar-27 19:49:05] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Mar-27 19:49:05] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
    [2014-Mar-27 19:49:05] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
    [2014-Mar-27 19:49:07] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
        User Message : The gateway failed to connect with the message:
    500 Internal Server Error
    [2014-Mar-27 19:49:07] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
        User Message : The gateway failed to connect with the message:
    500 Internal Server Error
    [2014-Mar-27 19:49:07] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Mar-27 19:49:07] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Mar-27 19:49:07] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Mar-27 19:49:15] RDP (0): *** Application terminated ***
    [2014-Mar-29 12:03:43] RDP (0): Final rdp configuration used: gatewayhostname:s:javpeds.com
    screen mode id:i:2
    use multimon:i:0
    session bpp:i:24
    full address:s:10.1.10.11
    audiomode:i:2
    username:s:javpeds\ptraquair
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:'SF Cartoonist Hand';font-size:18px;line-height:normal;" />bookmarktype:i:3
    use redirection server name:i:0
    [2014-Mar-29 12:03:43] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Mar-29 12:03:43] RDP (0): lo0 af=18  addr= netmask=
    [2014-Mar-29 12:03:43] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Mar-29 12:03:43] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Mar-29 12:03:43] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:03:43] RDP (0): gif0 af=18  addr= netmask=
    [2014-Mar-29 12:03:43] RDP (0): stf0 af=18  addr= netmask=
    [2014-Mar-29 12:03:43] RDP (0): en0 af=18  addr= netmask=
    [2014-Mar-29 12:03:43] RDP (0): en1 af=18  addr= netmask=
    [2014-Mar-29 12:03:43] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:03:43] RDP (0): en1 af=2 (AF_INET)  addr=192.168.1.29 netmask=255.255.255.0
    [2014-Mar-29 12:03:43] RDP (0): fw0 af=18  addr= netmask=
    [2014-Mar-29 12:03:43] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Mar-29 12:03:43] RDP (0): utun0 af=18  addr= netmask=
    [2014-Mar-29 12:03:43] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::c852:1a8d:126a:a88a%utun0
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:03:43] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:c852:1a8d:126a:a88a
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:03:43] RDP (0): --- END INTERFACE LIST ---
    [2014-Mar-29 12:03:43] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Mar-29 12:03:43] RDP (0): client version: 8.0.24428
    [2014-Mar-29 12:03:44] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Mar-29 12:03:44] RDP (0): Resolved '10.1.10.11' to '10.1.10.11' using NameResolveMethod_DNS(1)
    [2014-Mar-29 12:03:52] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Mar-29 12:03:52] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Mar-29 12:03:52] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Mar-29 12:03:52] RDP (0): lo0 af=18  addr= netmask=
    [2014-Mar-29 12:03:52] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Mar-29 12:03:52] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Mar-29 12:03:52] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:03:52] RDP (0): gif0 af=18  addr= netmask=
    [2014-Mar-29 12:03:52] RDP (0): stf0 af=18  addr= netmask=
    [2014-Mar-29 12:03:52] RDP (0): en0 af=18  addr= netmask=
    [2014-Mar-29 12:03:52] RDP (0): en1 af=18  addr= netmask=
    [2014-Mar-29 12:03:52] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:03:52] RDP (0): en1 af=2 (AF_INET)  addr=192.168.1.29 netmask=255.255.255.0
    [2014-Mar-29 12:03:52] RDP (0): fw0 af=18  addr= netmask=
    [2014-Mar-29 12:03:52] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Mar-29 12:03:52] RDP (0): utun0 af=18  addr= netmask=
    [2014-Mar-29 12:03:52] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::c852:1a8d:126a:a88a%utun0
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:03:52] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:c852:1a8d:126a:a88a
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:03:52] RDP (0): --- END INTERFACE LIST ---
    [2014-Mar-29 12:03:52] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Mar-29 12:03:52] RDP (0): client version: 8.0.24428
    [2014-Mar-29 12:03:52] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Mar-29 12:03:52] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
    [2014-Mar-29 12:03:52] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
    [2014-Mar-29 12:03:53] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
        User Message : The gateway failed to connect with the message:
    500 Internal Server Error
    [2014-Mar-29 12:03:53] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
        User Message : The gateway failed to connect with the message:
    500 Internal Server Error
    [2014-Mar-29 12:03:53] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Mar-29 12:03:53] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Mar-29 12:03:53] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Mar-29 12:04:24] RDP (0): *** Application terminated ***
    [2014-Mar-29 12:53:47] RDP (0): Final rdp configuration used: gatewayhostname:s:javpeds.com
    screen mode id:i:2
    use multimon:i:0
    session bpp:i:24
    full address:s:10.1.10.11
    audiomode:i:2
    username:s:javpeds\ptraquair
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:'SF Cartoonist Hand';font-size:18px;line-height:normal;" />bookmarktype:i:3
    use redirection server name:i:0
    [2014-Mar-29 12:53:47] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Mar-29 12:53:47] RDP (0): lo0 af=18  addr= netmask=
    [2014-Mar-29 12:53:47] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Mar-29 12:53:47] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Mar-29 12:53:47] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:53:47] RDP (0): gif0 af=18  addr= netmask=
    [2014-Mar-29 12:53:47] RDP (0): stf0 af=18  addr= netmask=
    [2014-Mar-29 12:53:47] RDP (0): en0 af=18  addr= netmask=
    [2014-Mar-29 12:53:47] RDP (0): en1 af=18  addr= netmask=
    [2014-Mar-29 12:53:47] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:53:47] RDP (0): en1 af=2 (AF_INET)  addr=10.59.1.176 netmask=255.255.255.0
    [2014-Mar-29 12:53:47] RDP (0): fw0 af=18  addr= netmask=
    [2014-Mar-29 12:53:47] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Mar-29 12:53:47] RDP (0): utun0 af=18  addr= netmask=
    [2014-Mar-29 12:53:47] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e590:f4:e6f3:79ee%utun0
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:53:47] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e590:f4:e6f3:79ee
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:53:47] RDP (0): --- END INTERFACE LIST ---
    [2014-Mar-29 12:53:47] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Mar-29 12:53:47] RDP (0): client version: 8.0.24428
    [2014-Mar-29 12:53:47] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Mar-29 12:53:47] RDP (0): Resolved '10.1.10.11' to '10.1.10.11' using NameResolveMethod_DNS(1)
    [2014-Mar-29 12:53:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Mar-29 12:53:55] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Mar-29 12:53:55] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Mar-29 12:53:55] RDP (0): lo0 af=18  addr= netmask=
    [2014-Mar-29 12:53:55] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Mar-29 12:53:55] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Mar-29 12:53:55] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:53:55] RDP (0): gif0 af=18  addr= netmask=
    [2014-Mar-29 12:53:55] RDP (0): stf0 af=18  addr= netmask=
    [2014-Mar-29 12:53:55] RDP (0): en0 af=18  addr= netmask=
    [2014-Mar-29 12:53:55] RDP (0): en1 af=18  addr= netmask=
    [2014-Mar-29 12:53:55] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::226:bbff:fe00:c3d7%en1
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:53:55] RDP (0): en1 af=2 (AF_INET)  addr=10.59.1.176 netmask=255.255.255.0
    [2014-Mar-29 12:53:55] RDP (0): fw0 af=18  addr= netmask=
    [2014-Mar-29 12:53:55] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Mar-29 12:53:55] RDP (0): utun0 af=18  addr= netmask=
    [2014-Mar-29 12:53:55] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::e590:f4:e6f3:79ee%utun0
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:53:55] RDP (0): utun0 af=30 (AF_INET6)  addr=fdce:4b1d:30c:78f8:e590:f4:e6f3:79ee
    netmask=ffff:ffff:ffff:ffff::
    [2014-Mar-29 12:53:55] RDP (0): --- END INTERFACE LIST ---
    [2014-Mar-29 12:53:55] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Mar-29 12:53:55] RDP (0): client version: 8.0.24428
    [2014-Mar-29 12:53:55] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Mar-29 12:53:55] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
    [2014-Mar-29 12:53:55] RDP (0): Resolved 'javpeds.com' to '70.88.173.126' using NameResolveMethod_DNS(1)
    [2014-Mar-29 12:53:56] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
        User Message : The gateway failed to connect with the message:
    500 Internal Server Error
    [2014-Mar-29 12:53:56] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 209
        User Message : The gateway failed to connect with the message:
    500 Internal Server Error
    [2014-Mar-29 12:53:56] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Mar-29 12:53:56] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Mar-29 12:53:56] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Mar-29 12:54:05] RDP (0): *** Application terminated ***

  • Health rollup to computer object from Microsoft.Windows.ApplicationComponent

    Hi All.
    Trying to author a Management Pack in Authoring Console 2007 R2. And can't get rollup to work as I want.
    Here's the long story.
    I've created:
    A discovery MP witch holds:
    - an abstract class inherited from Microsoft.Windows.Computer, named: "AppX.Cmp.Role"
    - a (seed?) class inherited from the above, named: "AppX.Cmp.Role.Server"
    - a class inherited from "AppX.Cmp.Role.Server" named "App.Cmp.Role.Server.Replicator"
    - a class inherited from "Microsoft.Windows.ApplicationComponent" named: "AppX.Cmp.Role.Server.Replicator.Loginstance"
    - a class of type "Microsoft.SystemCenter.InstanceGroup" named: "AppX.Group"
    - a relationship (system.hosting) where source class is "AppX.Cmp.Role.Server.Replicator" and target class is "AppX.Cmp.Role.Server.Replicator.Loginstance"
    - a registrydiscovery to discover "AppX.Cmp.Role.Server" targeted at "Windows.Operating.System"
    - a scriptdiscovery to discover "AppX.Cmp.Role.Server.Replicator" targeted at "AppX.Cmp.Role.Server"
    - a scriptdiscovery to discover "AppX.Cmp.Role.Server.Replicator.Loginstance" targeted at "AppX.Cmp.Role.Server.Replicator"
    - a groupdiscovery ("Microsoft.SystemCenter.GroupPopulator") target: "AppX.Group" (Microsoft.Windows.Computer)
    - a dependencymonitor targeted at "AppX.Cmp.Role.Server.Replicator" and monitor dependency set to "AppX.Cmp.Role.Server.Replicator.Loginstance", HealthRollup set to "worst state".
    A monitoring MP (depending on the discovery MP) witch holds:
    - a processmonitor targeted to "AppX.Cmp.Role.Server.Replicator" and "replicator.exe"
    - a logfilemonitor targeted to "AppX.Cmp.Role.Server.Replicator.Loginstance"
    - a stateview targeted to "AppX.Group"
    When I kill the "replicator.exe" process the object goes to unhealthy all the way up to "Windows.Computer". But when the logfilemonitor triggers and turns into "unhealthy state" the object in the above view turns RED but not the
    "Windows.Computer" object (looking at the default view "Windows Computers").
    Is it possible to get the "Windows.Computer" object to reflect the "AppX.Cmp.Role.Server.Replicator.Loginstance" state?
    How?

    Sorry about that - its been a long weekend.
    I was quoting from the following;
    "Use the Microsoft.Windows.LocalApplication as
    a base class when your class type represents a local application that shares the resources of the hosting Windows computer with other applications. Unlike theMicrosoft.Windows.ComputerRole class,
    the Microsoft.Windows.LocalApplication class
    type does not automatically roll its health up to the hosting computer."
    http://msdn.microsoft.com/en-us/library/ee533867.aspx
    Would you be able to upload the results if you run the Visio MP diagram generator and possibly the health explorer views and this will help me see how it hangs togther?

  • Unable to switch from Windows Update to Microsoft Update

    On a new Windows 7 64 bit computer I am unable to access Microsoft updates. Windows update works fine, but when I click the link to get updates for other Microsoft Products it will only take me to the screen that tells me to use the start menu to check for
    updates. I have also tried other links to Microsoft Update from other Microsoft webpages and end up with the same result.
    I have Office 2013 Standard installed and activated, and from previous installation experience know that I should be able to access numerous updates through this method.
    To verify that I am able to install updates for Office I manually downloaded and installed one Office 2013 update through the Microsoft download site.
    How do I get this machine to switch to Microsoft Update?

    Hi,
    According to your description, I think you may had a misunderstand between these two updates installation. Here is a paragraph which talking about Use Windows Update to Check for Updates to other Microsoft Products:
    By default, Windows Update can download and install updates for Windows 7 and features that are part of the operating system (such as Internet Explorer). You can also merge the functionality of Microsoft Update—a service for managing updates to Microsoft
    Office and several other Microsoft products—into Windows Update so that you no longer need to visit Office Online to get updates.
    If you do not already have Windows Update integrated with Microsoft Update, you will see the message “Get updates for other Microsoft products” on the Windows Update home page. To enable checking for other products, click the Find Out More option shown beside
    this message. This will take you to the Microsoft Update site for some quick installation steps. You only need to do this once. Thereafter, the Windows Update home page will indicate that you receive updates “For Windows and other products from Microsoft Update.”
    From: http://technet.microsoft.com/en-us/magazine/ff642466.aspx
    Hope this helps. If you need further assistance on this particular issue or any other Windows related issue, let us know and we will be glad to assist you.
    Roger Lu
    TechNet Community Support

  • Phone call saying they were from Microsoft Windows

    I received a phone call today from a man that said he was from Microsoft Windows, & that Microsoft had been receiving notices for several weeks that " something" was wrong with my computer.  Offline he had me do a system check, then said my computer
    was corrupted, then put on his floor supervisor who had me get online and do some more system checks and told me that I was corrupted and it would cost $150-$350 to fix. I hung up thinking this might be a scam.  My question is do you have someone who
    makes these type phone calls, or was it a scam? If it is corrupted how do I fix it.
    Thanks for your help
    [email protected]

    Hi, I also had a phone call from someone who claimed they were from the microsoft team and were having warnings suggesting that my computer had serious issues.  When I asked which computer they said the one with windows 7.  After a long phone call
    and they even went onto my computer remotely without asking for my permission showed me severial files which they classed as hackers trying to get into my information which can be corrected at a cost of £89.  When I told them I was not interested as the
    computer was only a cheap note book for the kids to use, I was put onto someone else for them to convince me that now all computers used in the home are now effected.   It came to an end with me hanging up on them.  If anybody out there is interested
    into investigating this, the company who is doing this is: BC Repair and Services, and claim to be microsoft authorised services.  Tel number:020390105670.
    Hope this can help,
    Ian

  • How to exclude a file/folder from Microsoft Security Essentials scan in Windows 7/Vista/XP?

    How to exclude a file/folder from Microsoft Security Essentials scan
    in Windows 7/Vista/XP?
    Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

    Hi,
    Thanks for sharing this link.
    Nice job!
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.

    Last night, some of our systems installed updates released on 11/13/2014.  
    KB3021674
    KB2901983
    KB3023266
    KB3014029
    KB3022777
    KB3020388
    KB890830
    Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
    Log Name:      Security
    Source:        Microsoft-Windows-Eventlog
    Date:          1/15/2015 11:12:39 AM
    Event ID:      1108
    Task Category: Event processing
    Level:         Error
    Keywords:      Audit Success
    User:          N/A
    Description:
    The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
    Servers running Windows Server 2008 that also installed the updates are not experiencing the problem.  It looks like one of the updates may have introduced this problem with Server 2008 R2.

    ...Did you for sure confirm that:
    https://technet.microsoft.com/library/security/MS15-001
    is the cause?
    I did.  I had a VM that was not experiencing the problem.  I took a snapshot and tested the patches one by one.  Installing only KB3023266 immediately caused the issue to occur (after reboot).  A similar process was used to confirm that
    installing KB2675611 resolved the problem.
    Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems.  We had installed this patch a few months ago on a couple of servers and it was always quick to install.  But,
    it seems like installing it on a symptomatic system can cause it to take a long time.

Maybe you are looking for

  • Saving a Sales Order

    Hi All: How can we save a sales order in WebUI without submitting it for processing. The idea is that a person can come back to the saved and not submitted sales order and can work on it befor doing the final submission to the system(ECC)? Regards

  • Display System Preference Underscan Slider Gone

    I always look for solutions in these support communities but have never posted one. Figure I was due as I was up till 3:30am fixing this problem, sort of. My TV is a Mac mini with an old/ancient Sony WEGA LCD Projection TV for a display. When I upgra

  • Get approval time

    Hi all, I want to get approval time of form in workflow.And then i want to show this information another form in WF. How can I do this? Thanks.

  • Help, using Mic with runtime to record on flash

    So ya I posted something earlier and I made it to open, what I meant was I need help recording on flsh with the runtime, with my mic, sorry for the confusion

  • VOFM Copying Routines

    Hi, I have 2 requirements - firstly where sales orders should not be combined into a delivery for a particular Special Processing Indicator value ( VBKD - SDABW ), i.e, seperate deliveries should be created. The 2nd requirement is for delivery split