Windows XP hangs while booting

Hi everybody
I am currently experiencing severe Windows XP SP2 boot problems!
My system is a MacBook Pro with Intel Core 2 Duo 2.4 GHz. Here is some more system Information:
* Model Identifier: MacBookPro3,1
* Boot ROM Version: MBP31.0070.B02
* SMC Version: 1.16f8
* RAM: 4GB
I have installed MacOS X (10.5.1) and Bootcamp. In addition I have installed Windws XP SP2 (German). Currently use and have installed NO additional hardware drivers apart from the BootCamp ones.
The system hangs sporadically when I boot (using Boot camp) under windows. Windows XP freezes mostly during the initial startup (before the log-in). Sometimes however it freezes after I have logged in and have performed a few operations. These hang-ups happen almost 95% percent of the time. Yet after a couple of new starts and safe mode boots I am able to log in. I would also like to mention that I cannot log in when I boot at safe mode because the built-in MBP keyboard does not work; so I just stop at the log in screen and restart.
thanks for the help in advance

I just fixed a Dell Inspiron laptop with a similar boot hang problem. The machine would hang if the iPod was plugged in the USB port, or even a powered USB hub. The machine is 5 years old and is USB 1.1
The machine would hang in the boot sequence right before it would go to Windows start part. I took USB completely out of the boot sequence and that didn't do it. What did do it, based on a suggested fix from a Dell guy.
With the iPod unplugged, here is the Dell suggestion which might help some but not this Dell (keep reading below for the fix that worked):
1. Restart the System. (Unplug the IPod from the system)
2. Tap <F2> at the Dell Logo to access the BIOS.
3. Go to the Advanced Tab, and disable the USB legacy support.
4. Save the changes and exit.
But on the 1100 that I was working on, it had a older bios and used the Alt-P procedure to page through BIOS options. On page 3, there was a USB Emulation option. If you read the description, there is no way one would think that this would have an effect. I changed this to Disabled and that allowed the machine to boot with the iPod plugged in.
I hope this helps someone. If your machines hangs before windows starts, get into the BIOS and go to work!! Tom [email protected]

Similar Messages

Windows XP hangs on boot, computer heats up

Hi,
I recently had my Nvidia card replaced in my Mac Book Pro, OSX 10.4.11 and since then tried to boot up Windows XP with Bootcamp. Windows XP hangs on booting and the computer heats up incredibly quickly. Does anyone know why I can't boot in Windows or how to fix this? The mac partition works fine and I can access my documents etc from windows through the mac side. But I do need to run certain programs on Windows. Any help is appreciated.

Hi and welcome to Discussions,
first thing I would try are the Safe Boot Options of XP described here http://support.microsoft.com/?scid=kb%3Ben-us%3B315222&x=10&y=11 and especially the 'enable VGA' option to ensure that XP is okay.
While in Safe Boot maybe deinstalling the Nvidia graphics driver currently installed can help.
Might be that because of the replacement, the new one isn't correctly detected.
Hope it helps
Stefan

When I enable hyper-v the computer hang while booting

About 10 days before I refresh my system windows , now when I enable hyper-v to use windows phone 8 emulator the computer hang while booting and cannot go to desktop. I am using windows 8. Before refreshing windows everything was alright. Please can
you give any suggestion to solve the problem.

This should be posted to answers.microsoft.com.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

System hangs while booting 2.6.38

My system hangs, while booting 2.6.38
The picture from the screen is here: http://bildr.no/view/844865 (the picture is not mine, but it's the same).
/ is located on raid1 array. Boot is separated to ext2.
Grub:
# (2) Arch Linux
title Arch Linux
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/md1 ro md=1,/dev/sda2,/dev/sdb2 md=2,/dev/sda3,/dev/sdb3 radeon.modeset=1 elevator=noop
initrd /boot/kernel26.img
Tried nomodeset and removing "elevator=noop".
$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:04.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4550]
01:00.1 Audio device: ATI Technologies Inc RV710/730
02:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
02:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
04:07.0 Network controller: Ralink corp. RT2800 802.11n PCI
04:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
The same here: https://bbs.archlinux.org/viewtopic.php?id=115190
Last edited by vit (2011-03-24 03:59:23)

The system is booting and hangs in other place.
Updated to .38.1
Doesn't help.
Last edited by vit (2011-03-24 15:29:49)

Window form hang while looping

I created a window form, while doing a while loop, the window hang while processing. It will revert back to normal state after it finished processing. How do I prevent my windowm form to hang while processing??? Also I do not understand why it will hang while doing a while loop???

Hello everybody, would you mind if you telling how to design tool menu as MAC OSx.

Windows 7 hangs from boot menu

Hi,
my Windows 7 partition refuses to start from boot menu, system just hangs and does nothing. I've not made any changes to the disk layout, only thing I can think of is the upgrade to 10.9.4 which probably changed the recovery partition.
History:
- iMac Mavericks 10.9.3 with boot camp 5.1.2 and Windows 7, used to start into Windows by pressing Alt on start up, then reboot from Windows menu or from Windows boot camp application into OS X and back without problems
- installed the 10.9.4 Build 13E28 upgrade some days ago
- Change today: rebooted from the boot camp system tray app into OS X, worked without a problem
- reboot from OS X into boot menu, select Windows 7 partition, system hangs
I've found this thread, describing a similar problem Repairing Boot Camp after creating new partition I think, however since my Index output only lists 4 partitions I think my problem might be a bit different.
Here's the output from: sudo gpt -r -vv show disk0
gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 976773167
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 816890832      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
817300472    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
818570008       1256
818571264 158201856      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120         15
976773135         32         Sec GPT table
976773167          1         Sec GPT header
and this one is from: sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 816890832] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 817300472 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 818571264 - 158201856] HPFS/QNX/AUX
and, just in case: diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Calimera                418.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data Windows 7               81.0 GB    disk0s4
I guess something mixed up the MBR since I would have expected line 4 of the fdisk output to show something 'Windows' like instead of HPFS/QNX/AUX, but even if that is correct, the question is how can the boot problem be fixed?
The Windows partition is accessible from OS X, so copying the data is not a problem if everything else fails. As far as I remember, the boot camp version in windows is 3.3 (it's an older iMac model).
GDisk is available, command line not a problem, if you need any further info let me know, any help appreciated.
thanks,
jk

Hi,
> Does the Bootcamp partition show up in Finder and can you see files in it?
Yes, the partition shows up in Finder and I can see and copy files.
> In Disk Utility, does the Bootcamp partition report as NTFS?
Yes it does, "Get Info" from Finder also reports it as a NTFS volume.
> Do you have any third party NTFS drivers?
Yes I have, Paragon NTFS tools.
> If you hold the ALT key can you boot into Windows?
No, system just hangs and needs to be rebooted via power-off.
> If you came from 10.9.3 to 10.9.4, the Recovery HD should have existed under 10.9.3.
Yes it did, I did a clean install from USB media when Mavericks came out, the Recovery HD is also visible - and has been - in the boot menu.
> The one strange part is that your volume says "Windows 7". Were any diskutil commands run to change volume names?
No, just a left click on the Volume Name in Finder and then change Bootcamp to Windows 7.
Output of dd:
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS    .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 68 ca 30 |........?....h.0|
00000020 00 00 00 00 80 00 80 00 ff f7 6d 09 00 00 00 00 |..........m.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 d7 f9 07 a2 27 08 a2 26 |............'..&|
00000050 16 1d 72 73 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |..rs.3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
So, you think running the Windows startup repair will fix the problem? Is there something that I should be aware of in terms of interfering with the OS X partition?
jk

Windows 7 hangs on Boot up with smartboard USB plugged in.

Hi All
I am having a problem with our dual booting Imacs. When we boot up into windows 7 the mac just hangs for about 5 minutes. I have narrowed this down to our smartboards being plugged into the mac once we remove the USB it boots up no problems with no hangs.
We have updated boot camp to 3.2 and updated the device drivers to the latest version but it still hangs.
Has anyone come across this problem before? Or a similar problem?
Any help appreciated.
Scott

Hi Erica
No it is not a mass storage device it is a smartboard which is plugged in. Do you think this could be a drivers problem?

T400 with Windows 7 hangs on boot

This problem crops up every couple of months. After installing something, including Windows updates, the thing appears to re-boot properly. However it hangs immediately as soon as I try to launch any application. Nothing at all works. Sometimes I can re-boot in safe mode and roll back the system, but sometimes the only way to get the thing working is to hand it over to the techs who re-install Windows. Has anybody else seen this problem? I have googled it for months but come up empty. Thanks.

run the hdd diagnostic tool from the bios menu.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Dual G5 hangs while booting from internal hard-disk

Hi,
When I switched my Dual G5 (2x2.5GHz around 15 months old, 1.5GB ram, 160GB hard disk, OS 10.4.6) on yesterday, it wouldn't boot from the internal hard disk. The spinning "wheel" (under the Apple logo) didn't show up and after a couple (5? 10?) of minutes the fans started making more noise than they ever did. I tried again with the same result.
It did boot from CD though and the disk was accessible. Disk Utility didn't report a problem and the hardware test neither. Subsequent rebooting from the internal hard disk failed again.
Then I reinstalled 10.4 (with archive & install), but with the same result. Then I got a Firewire drive from the computer support department, formatted it, installed 10.4 and copied (nearly) the entire internal hard disk's content to it. I was able to work normally from that disk.
Then I booted again from the 10.4 installation disk, formatted the internal drive, reinstalled 10.4 and then it did boot from the internal drive. I migrated all my files and now everything is working again (although a few things might have gone missing). And I lost nearly a day of work.
I conclude from this that it wasn't the disk, but that somehow an essential part of the boot software got damaged.
My question: how did this happen? What could have caused it? Is there someone with a similar experience (i.e., failure to boot from disk while the disk is still ok)? Is there any way to prevent it from happening again?

we have g5s the same as you. the few times we've ever had an issue with them refusing to boot up have been solved by running diskwarrior. it's an utter 'must have'.
it's a harsh fact that drives (and the operating system that sits on them) do fail from time to time. careful housekeeping (repairing permissions regularly, running disk utility repair and/or diskwarrior) will help to prevent any major problems.
if you have an issue that can't be fixed by doing these things (and we just had one with a file sharing problem) the best course of action is a full reinstall.
we keep a fw800 drive with the latest installers of every application we use handy in each room for this purpose. it's time consuming to stay on top of but worth it when it all goes pear-shaped.

Screen hangs while booting from Install disk

I'm trying to install 10.3.1 using my original disks onto an iBook G4 I bought from eBay that has 10.3.9 on it. The iBook works fine, but I don't have the administrator password and the seller has long along stopped answering my emails. I'm installing 10.3.1 simply to do a clean install and reset the admin passwords.
However, when I startup and press 'C' and insert the disk, the computer hangs on the initial Gray screen with the Apple. There's no whirling dial. It's just a frozen screen. In fact, the apple looks off center and I can see a thin strip of multi-color pixels. It doesn't do that when it boots up from the hard drive.
Any ideas about what's wrong?
iBook G4

Hi Kaushik!
If the Panther install CDs, look like THESE, they should work.
But, if you used those same CDs, to install Panther on another Mac, that is still using that OS, it is against the Software Liscense Agreement, to install it on the iBook.
"2. Permitted License Uses and Restrictions. This License allows you to install and use one copy of the Apple Software on a single computer at a time...."
ali b

Solution: iTunes 10.6.0.40 on Windows 7 hangs while syncing

I was trying to Sync Audiobooks to my iPod nano (6th gen) but iTunes 10.6.0.40 (on Win 7 Home Premium 64-bit SP 1) just stopped being responsive after pressing Apply and it showing "preparing to sync" in the status window. The nano went into sync mode for about 5 seconds but then returned to Connected state. iTunes.exe *32 was running at 100% (on one CPU) and did not even appear to begin the sync. [This state was also entered as soon as I set the "Manually manage music and videos" on the Device's Summary page.]
After (wasting) many hours of trying the standard support instructions to uninstall everything from Apple Inc. - iTunes, then Apple Software Update, then Bonjour, then Apple Mobile Device Support, then Apple Application Support - then download (another) copy of iTunes64Setup.exe, then install iTunes - the answer came ...
A very pleasant, helpful support rep (for case 298676734) thought to try the DOS command "netsh winsock reset" as suggested by wiclee in https://discussions.apple.com/thread/3559328 and sodaboy581 in https://discussions.apple.com/message/16361402#16361402. More explanation of this fix can be found at What does "netsh winsock reset" do? and Repair/Reset Winsock settings.
I suggest you try this first!! Hopefully this discussion has enough fo the right tags to help others find this fix!

More explanation of this fix can be found at What does "netsh winsock reset" do? and Repair/Reset Winsock settings.
Also see:
Apple software on Windows: May see performance issues and blank iTunes Store
(The Winsock key reset has the effect of clearing away the LSP in the cases where it's a conflict with a LSP in play, rather than corruption of the key.)

How do I access the music from my Mac drive while booted into Windows?

How do I access the music from my Mac drive while booted into Windows via Bootcamp? I tried using MacDrive but it's not supported for Vista 64-bit edition. Is there another program out there that I can use? I just want to be able to access my music that's on Leopard while in Vista. Any advice will be much appreciated. Thanks in advance.

Your best bet is to move the music on the Windows side since Leopard will be able to read and play the music from the mounted Windows drive (Leopard will not be able write anything to the Windows NTFS partition).
In your case it won't work the other way around.
Axel F.

Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

Long story short: Simply get CC for teams. At 500 bucks a year it's a steal and those 5 licenses in the base package (or was it 10 even?) cover all your computers, at least the 3 ones you mentioned. For system requirements refer to the individual product pages.
Mylenium

[~SOLVED] 1 min hang during boot while mounting xfs partitions (LVM)

Hi all,
After the upgrade I did yesterday (which included linux-3.12.8-1 and lvm2), the boot time has increased by 1 minute as the system hangs while mounting two partitions formatted as xfs and residing on logical volumes.
$ systemd-analyze blame
1min 13.676s home-VDP76-videos.mount
1min 13.111s home-VDP76-VBox_VMs.mount
2.980s [email protected]
I have the fsck hook as second-to-last entry in my mkinitcpio.conf, but the fstab entries for these partitions include
... xfs defaults 0 0
so, as far as I undertstand, the partitions should not be checked, am I missing something!?
I have googled for similar issues but I did not find anything useful, any suggestion would be greatly appreciated.
Thanks
edit: I blame the check disk because of what reported on the system journal (note the time stamps):
Jan 23 00:10:37 ArchTP kernel: psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Jan 23 00:10:39 ArchTP kernel: psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Jan 23 00:10:40 ArchTP kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input25
Jan 23 00:11:47 ArchTP systemd[1]: Mounted /home/VDP76/VBox_VMs.
Jan 23 00:11:47 ArchTP kernel: XFS (dm-4): Ending clean mount
Jan 23 00:11:47 ArchTP kernel: XFS (dm-3): Ending clean mount
Jan 23 00:11:47 ArchTP systemd[1]: Mounted /home/VDP76/videos.
Jan 23 00:11:47 ArchTP systemd[1]: Starting Local File Systems.
Jan 23 00:11:47 ArchTP systemd[1]: Reached target Local File Systems.
I should also add that the involved partitions are ~20 Gb each and quite full...
edit2: I have freed up almost all space on the video partition and the time for mounting those partitions has now decreased to 8 sec...I will mark the thread as solved, but I still would appreciate an input on the reasons why the partitions are checked regardless of the fstab setting, for example, is this pertinent!?
dumpe2fs -h /dev/mapper/waldorf-video | grep -i 'mount count'
dumpe2fs 1.42.8 (20-Jun-2013)
dumpe2fs: Bad magic number in super-block while trying to open /dev/mapper/waldorf-video
Last edited by VDP76 (2014-01-22 23:38:25)

WonderWoofy wrote:I don't think that the fsck.xfs is really a fsck at all. It is there for compatibility purposes, and a real check can be done with xfs_check and xfs_repair. So the fsck.xfs will just always give an exit status of zero.
exactly..in fact the man page says
fsck.xfs(8) wrote:fsck.xfs - do nothing, successfully
so fsck.xfs simply exits with a zero exit status.
running xfs_check gives
xfs_check is deprecated and scheduled for removal in June 2014.
Please use xfs_repair -n <dev> instead.
and xfs_repair does not find errors on both partitions.
Still, I do not understand how nothing being done can take up so much time.
By the way, a short S.M.A.R.T. self-test did not report errors...
In the meanwhile, there has been another kernel upgrade and the timing issue persists, so I am assuming it has something to do with the last lvm2 upgrade.

While i installed windows 8.1 by boot camp there is message no bootable device

while i installed windows 8.1 by boot camp there is message no bootable device and that was after i entered the code no of windows

Is the current nVidia driver the one that came with Bootcamp?

Windows XP hangs while booting

Similar Messages

Maybe you are looking for