Windows XP Home can't find HP printer connected via Ethernet

I posted this on the Bonjour forum, but this might be a better place for it. So:
We just got an HP Photosmart D7260, which I've connected to our network via Ethernet.
My MacBook and Kittendaddy's eMac found it with no problem, but when I boot into XP Home, the Printer Wizard can't find it, and Bonjour sees it but can't find the correct driver (even though I've installed it). When I click on "Have disk", it takes me to the disk contents but I can't seem to find the file it wants.
Any ideas?
God, why is everything so complicated when it comes to Windows? It drives me crazy, I tell you.
Oh yeah, it's this printer, if that's important: http://tinyurl.com/265367

Some articles that ought to help, sorry can't give a quick answer.
http://www.macwindows.com/leopard
sharing printers:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8666.html
Getting Leo and Windows to play nice together -
http://www.computerworld.com/action/article.do?command=viewArticleBasic&articleI d=9113540&intsrc=hmtshead
iFelix (work in progress)
http://www.ifelix.co.uk/tech/leopard.html
Finding IP address:
http://www.ifelix.co.uk/tech/3036.html
SMB:
http://support.apple.com/kb/HT1568

Similar Messages

Can't find the printer connection on Satellite M40

Silly question but I can't find the printer connection on my satellite M40? There looks to be a place for it on the left hand side of the notebook - there is a little printer sign, but the actual socket is covered over - should I remove it? and how do I do it? Help!!

Hello
As far as I know you can connect printer directly if you use USB port (newer printers). On the left side there are three ports:
- RGB (Monitor) port
- One USB port and
- PC Card slot
I really do not understand where you have found printer sign there.

HT4356 Can I use a 'pc' network printer connected via ethernet to the home wifi network ?

Can I use a 'pc' network printer connected via ethernet to the home wifi network ?
or must the printer I want to use also have a wifi connection ?
I have a home network using ethernet connected devices to a router, also attached to th erouter is a WiFi unit. We are using the WiFi unit to connect to the network and hence to the big wide WWW. We now want to print from our IPads pereferable to our netowk connected HP Officejet Pro 8500 A909a series. (not the wireless model).
I was using the HP ePrint app to print from the Ipad, but I do not fully understand how this works. It seems that you must use the app to do the printing which is fine for basic email and photos, but I can not access the drawing package I have, and want to print from it. Please what is it that I do not understand.

You must use an airprint printer directly connected to wifi through it's own wifi card.
See here for info:
http://support.apple.com/kb/ht4356

Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

I am a big fan of both the Airport Extreme and Airport Express. In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters. We have a good quality wired Cat5e ethernet network extended between the buildings and offices now. Is this possible and does it seem like a good practical solution? I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas.

Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

Can't find certain servers connecting via Airport Express

For the last couple of weeks I've been intermittantly unable to access certain websites (time.com / nytimes.com) when connected to the Net via Airport Express. Sometimes these pages come up, more often then not, they don't. I have no problem receiving email or accessing other sites. Also, I always loose my connection when streaming news stories from NPR. However, I have no such problem when connected directly via ethernet. Thus, it seems to be some glitch with airport express. Does this make sense to anyone?

Gerard Van Schip wrote:
I have 3 printers connected to the network via Ethernet and as long as I'm connected directly to the network I can print but as soon as I connect to one of the 4 Airport Express units I have I can no longer print.
You don't describe what happens when you try to print.
Does the IP address your computer is granted in both configurations match in the first three elements (such as 10.0.1.5 and 10.0.1.7)? If not, then your AirPort Express unit is creating a new "subnet", which can cause problems when your computer tries to communicate with the printer.
Try adding the printer in the "Print & Fax" panel of System Preferences by choosing the "IP" option and entering the IP address of the printer.

New iMac can't find the old iMac via Ethernet

I just bought a new 27" iMac and I am trying to migrate data from my old iMac.
I have the two machines hooked together via Ethernet and have Etherenet turned on in the source iMac but the new iMac can't find the old iMac. The pinwheel keeps spinning with no success. What should I do here?

Gramps wrote:
What FireWire?
There is no FireWire port on the new machine so this is a non-starter.
Unfortunately you didn't read my post very thoroughly. You are correct, the new iMacs do not include FW however your old Mac probably does. For just that reason and more Apple makes a Thunderbolt to Firewire adapter which you can use if you opt to use FW Target Disk Mode. You can find the adapter by going to your Apple online store or Amazon carries it to. Here is the Amazon link:
http://www.amazon.com/Apple-Thunderbolt-to-FireWire-Adapter/dp/B008RXYOKY/ref=sr _1_1?ie=UTF8&qid=1366831510&sr=8-1&keywords=thunderbolt+to+firewire+cable
However as I mentioned use TM or a bootable clone with Migration Assistant. If your old Mac was using any verison of OS X from Leopard (10.5.x) on at the very least you should have a Time Machine backup!
Also use Pondiini's guide as AnaMusic suggests, it's THE GUIDE for using Migration Assistant and Setup Assistant. He has also created excellent guides for Time Machine too.

My windows 8 pc can not find my printer plugged into my airport extreme. My mac and desktop computer running win 7 can. Help.

i can print from my win 7 and macbook air. however when running bonjour printer wizard on win 8 laptop, my printer does not show up on the list.

Thanks. It turns out that since I had received this printer as a cast-off from the office, it was still config'd with the old IP info. Once I set it for remote configuration (enabling something called "BOOTP" in the TCP/IP config sub-menu), I printed off the status page to find that all the addresses (IP, subnet, gateway) were "unspecified" with 0.0.0.0 values. But when I went back into the printer config menu, disabled BOOTP, and looked at the IP address, I saw that the printer had rec'd a new IP address (10.0.1.5) from the AEBS, I presume (I confess that I am by no means an experienced networker). I reprinted the status page to confirm the 10.0.1.5 IP, then I used that IP to install the printer on the PC via the method you suggested and everything works fine, thanks! One concern for future use, though. Is it possible that if the printer, AEBS, or PC are powered off and restarted, that the IP address of the printer will be changed by the AEBS and I will be unable to print to it? Since IP assignment by the AEBS is dynamic (right?), will this affect future printing? Something to do with DHCP renewal?

Using apple base station now, but the other 3 windows based computers couldn't find the printer connected to apple base station

When I am trying to add a new printer on my iMac, the search result will show:
HP Photosmart C6200 series
and there is no problem to add this printer to the iMac.
But when I am trying to add a new printer on my other windows based computers, the search result will show nothing. So I shared the printer on my iMac, and the search result will show:
HP Photosmart C6200 series @ XXXXX's iMac
and there is no problem to add this shared iMac printer to the windows based computers.
I just don't understand. Can anyone explain this to me?
Thanks a lot.
Karen

You and at least one other that I know of locally. All this happened after the latest Airport update.
Interestingly, last week, three of us who use Mac laptops were unceremoniously dumped from our small office network's wireless router (non-Apple). When we tried to reconnect it kept asking for a password - none of the PC users are having this problem - and I HATE that!! Before this we all connected immediately with no problems.
I'm still running my home-based Airport Extreme Base Station and Airport Express on a non-passworded network - the only way we can get online, still.
Hope Apple wakes up and realizes there are a few problems with this release.
Rachel.

My house has a wired ethernet to many rooms. Can I have my imac connected via ethernet (then to router via comcast cable modem) and also have my airport extreme connected to another outlet?

Not experianced in networking. Current working setup is wireless network with airport extreme. Having problems with signal so may need to expand network with another airport. My house has a wired ethernet to most rooms. What is the best approach to maintain wireless network and also use ethernet wired connections where convienient?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

Can't find wireless printer with E2000 router

I have a Dell Inspiron 1720 (running Vista Home Premium) that connects to my Linksys E2000 and to a wireless printer, the Canon MX870. It's been working for months without problems.
I just got a Toshiba Satellite P770-BT4G22 Laptop (running Window 7 Professional 64 bit) and installed the Cisco Connect software following the instructions where you have already set up the router and just need to install the software to do things like add a device. I can connect to the router fine using a web browser or the Cisco Connect Software and my Toshiba connects to the Internet through the router without problems.
The problem is Cisco Connect says it can't find a wireless printer when I run it on my new Toshiba. I've put the printer within 3 feet of the router with my Toshiba in between but still it can't find it. My Dell in another room connects to the printer no problem. And I can print to the Canon if I select the Shared Canon Printer ( on the Dell) using the Toshiba's Control Panel Add Printer function. But obviously that means the Dell has to be on so that's not good for much more than troubleshooting. I've also wired a connection from the printer to the Toshiba and downloaded the latest driver, printed that way so I know that's not the problem. The problem is that Cisco Connect can't find the printer. It says there are 6 devices attached to my router so it's seeing something, but I guess not the printer. I've turned any firewalls off for this testing too.
I'm stumped as to why it can't find the printer when the Dell did and they are all on the same network. Unless it's not compatible with 64 bit Windows. Any help would be greatly appreciated.
Thank you.
Solved!
Go to Solution.

I have already added the printer to my network using Windows Add Printer prior to assigning the printer a static IP. But I followed your instructions in making the IP static so if I reset the router I don't have to go through the process again.
When I ran CC and told it to add a printer, it did not identify any printer for me, it went from the screen where you say to add a printer to one where it asked me to name the printer. Honestly, I wasn't even sure if it was referring to the Canon because I'd already added it using Windows, albeit without a static IP, just by knowing what IP it had been assigned. After I gave it the name, it went back to the "home" screen with computers & devices, parental controls, etc. No errors, but no real way to see or change what I had done.
That's why I was asking if there's a way to look at the router and view devices that have a static IP. I can view the DHCP table but it's not there of course. I don't really see anywhere using the router software (either by web connection or CC) where the Canon printer is listed. I see it in Windows Printers, but I saw it there before I reran CC and it asked me to name it.
I appreciate your help and I'm glad to be up and running with it. Especially with having a static IP. I'm just trying to better understand what happened and how to view my devices connected to the router.
Thank you very much for your help.

Can't find network printer

I've got a HP Photosmart Plus installed on my network. I install it on every computer in the house (4 computers), and then it works.
But when I close the computer and restart, the computer can't find the printer.
It's still connected to the network, that I can see if I open my router.
The only way is to reinstall the printer, but sometimes the computer can't find the printer to install.
This happens on both W7 oand W8.
Anyone knows whats wrong.

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
   This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
   first if needed. More Wireless Printing help is here (Windows solution 4, static IP).
2. Verify in the printer that 'Auto Off/Sleep' is disabled. Use the Embedded Web Server (EWS) by going
   to the printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
   Assistant, Printer Home Page (EWS). Also check your Printers Properties.
3. If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
4. If needed and you assigned a static IP address, try using 8.8.8.8 for the Preferred DNS server and
     8.8.4.4 at the Alternate DNS server.
In the router: (Refer to your router manual for information)
5. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
6. Set router to 20Mhz only, or 145Mbps depending on router.
7. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
8. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
9. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
10. SSID broadcast must be enabled.
11. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
12. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Tried to print from ipad4 with wifi printer. Saying can't find air printer. Printer on and it has printed previously.

Tried to print from my ipad 4 but saying can't find air printer. It has printed before.

Sharonanthony-
First, try double-clicking your Home button. A row of recent Apps will line up along the bottom of the screen. Scroll across and look for the Print Center icon. If it is there, you should be able to delete any print job that might be hanging it up.
If you can access the internet, then you should have a good connection to a printer that is using the same WiFi. If you do not have your normal connection to the internet, then I suggest you unplug your WiFi router for a few seconds. Then reset the iPad's network at Settings-General-Reset-Reset Network Settings. You will need to reconnect the iPad to WiFi.
Fred

My computer and the Canon software for my wireless printer can't find my printer which is only two f

My computer and the Canon software for my wireless printer can't find my printer which is only two feet away. What do I do now?

Hi DrLilaB,
So that the Community can help you better, we will need to know what model printer you are using and Computer Operating System. (Windows XP/Vista/7/8 or Mac 10.x)
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.

I am using windows 7 and can't get the print drives to load for F2210 printer

I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

Hello @Imvertical
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try.
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I just bought an hp6500a printer and my ipad2 won't print. It says it can't find a printer. Does anyone know how to get it to print?

I need help to print. I just bought an hp6500a printer and my iPad 2 says it can't find a printer. My iMac pro is printing to it wirelessly. Help!

Just up late weighing in on this question.
I have a HP6500a. I called for help in setting up the "Air Print" facility from HP itself. 1 800 474 6836 They were great. Its complex but they have a special "Air Print" division. Ask the representative who comes on to be transferred there right away. (Unfortunately I have three conflicting computers on the same Air Print system, so I've been there a few times until everything got sorted out). I thought HP told me to install an HP Air print App on my home screen but right now I can't find it . Guess I got too many Apps! (Oh right there is a search function, but I just tried HP or Air Print and came up empty!).
Good Luck...sorry I don't remember the exact details of setting my unit up, but it does depend upon what ISP you have.

Windows XP Home can't find HP printer connected via Ethernet

Similar Messages

Maybe you are looking for