WINDOWS XP HOME SP2 portable skype version ?

Hello,
first of all, i run windows xp home edition on a very old computer DELL OPTIPLEX 2600 with SERVICE PACK 2.
So i need a old skype portable version because i do not want to upgrade my service pack and i cannot install new skype version because it is too fat for my XP HOME EDITION os.
So please give me a skype portable download link.
Bye.
P.S. = i already downloaded all skype portable versions from http://en.chat4o.com/c/download-skype-portable/ but these skype cannot connect......

Yes. It's no longer possible to login to Skype versions older than 6.14.
http://blogs.skype.com/2014/06/20/making-way-for-the-next-generation-of-skype-on-desktop/
"As a result, we are going to retire older versions of Skype for Windows desktop (6.13 and below) as well as Skype for Mac (6.14 and below) over the next few months."

Similar Messages

Setup.exe from Boot Camp won't work with Windows Xp Home SP2

Hi,
I just bought the great MacBook Pro. So I work over years in Windows it's absolutliy necessary to migrate my old System to MacBook. I succeeded in cloning my old installation completly to the MacBook and Windows is activated. when I start windows, of course no MacBook drivers are installed, so I have only a minimum of functionality. Now I want to start the BootCamp to install the drivers. But if I start "Setup.exe" it's ending immediately with: There were errors... before Boot camp could be initialized.
I downloaded the newest BootCamp (3.1) and start it, the program crashes!
I can't get it working!!! What have I to do - please help me!
I use Windows XP Home SP2.
Thanks!

If you didn't try installing Boot Camp from your OS X disc, try that first.
From what you wrote it sounds like you somehow cloned your old install of windows over to a fresh partition. Depending on how you did this, the problem might lie here.
First, what version of OSX are you running?
If your MacBook Pro is new, it should come with Snow Leopard, which wouldn't explain the problem.
How exactly did you clone windows over?
Depending on how you cloned windows, your easiest solution might be to back up any files and applications you need from windows, remove the current Windows partition, and create a new partition and installation of Windows through Boot Camp on OSX. Normally Boot Camp should install its drivers after a successful installation of Windows.

Cannot connect via cable on Windows XP home SP2

Good Afternoon,
Maybe you can assist me here.
I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
The following is the steps I followed in both cases starting with XP Pro
1. Installed Drivers
2. Installed PC Suite
3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
XP Home
Followed steps 1 + 2 in the same order
3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
Can you advise on what I can do.

Hi
Sounds lik ethe PC is having issues seeing it. Try this
/discussions/board/message?board.id=pcsuite&message.id=11480
Try this first:
1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
3. Select "PC Connectivity Solution", click "Change" and then "Repair".
4. After Repair, restart PC
music

Windows 7 Home Premium (System Builders Version) Will it Work?

I would like to know if Windows 7 64bit (Home Premium), can be installed by using the bootcamp assistant in my MacBook Pro (system specs below). I'm reluctant to install a system builders version of Windows 7 since Microsoft recently changed the license terms in their Windows System Builders Editions. I plan to buy this version via Newegg.com (Product Page here: http://www.newegg.com/Product/Product.aspx?Item=N82E16832116754&cmre=windows_7_home_premium_system_builder-_-32-116-754--Product )
Thank You for any help in this matter...
Mike
(System Specs Below)

The hatter wrote:
I was recommending that if someone was to go out and buy Windows today, that they skip XP entirely, not that if you have it, to upgrade (though I think Windows 7 is more stable and useful in many ways).
I would like to know if Windows 7 64bit (Home Premium), can be installed by using the bootcamp assistant in my MacBook Pro (system specs below). I'm reluctant to install a system builders version of Windows 7 since Microsoft recently changed the license terms in their Windows System Builders Editions. I plan to buy this version via Newegg.com
For which I replied a hearty, "Yes!"
What I meant with my last post was that I successfully installed Windows 7 Home Premium (System Builders version) using bootcamp assistant.

1x PC (Windows XP Home SP2), 1x 4thG 40g iPod, 1x 2g Nano - Data Cables?

Hi, I have had the 4th generation 40g iPod for quite a while no with no major hiccups but have bought my daughter a 2g Nano for Christmas and am concerned about any implications of installing the 2nd iPod to my PC. I've never chosen to update iTunes as prompted regularly as i did have problems with initial set up of my 4thG 40g iPod but now i know i am some way behind on the version of iTunes that i am running. So, my questions, so far, are:
1) If i install the newer version of iTunes from the disc enclosed with the Nano will i loose the music files that i already have on my PC/iTunes? Will the newer version of iTunes overwrite the older version but leave the music files intact?
2) The data cable to attach the Nano to the PC (iPod Dock Connector to USB 2.0 cable) is identical to the one that i use to attach my 4thG 40g iPod to the PC... can i use the same cable to transfer files/charge for both of these iPods?
3) Before i install the newer version of iTunes should i move my iTunes library to another place on my PC just in case?
Any other helpful advice or tips on how to run both of these wonderful machines on my one dinky PC would be extremely greatfully received... thank you
2g Nano and 4thG 40g iPod Windows XP Home Edition with SP2 installed

...bit of an update since the last post i made:
I have now managed to update my iTunes to the latest version and have also installed the Nano onto my PC. I've even managed to trasnfer some music files onto the Nano also...
However, my problem lies with the iTunes library set up.
The 4thG 40g iPod i mentioned is used by a 35 year old hip hop fan who doesn't need to worry about Parental Guidance and until now has updated his iPod with ALL the songs that are in the library. Now i have a 11 year old daughter who likes typical 11 year stuff but i don't want to trawl thro 40g worth of music to find the stuff she can listen to .. whilst the 35 year old hip hop fan doesn't want to listen to tracks on random only to find he's got girls alound on his iPod!!
Is there anyway i can make seperate libraries for the 2 different iPod models? I have tried going into the iPod options when each of the iPods have been connected and have changed the path to the library but this hasn't helped so far...
again, any help would be truly appreciated...thank you

HP Compaq d530 SFF not recognizing DIMMs. Windows Vista Home Premium 32bit - BIOS version 02.44

Hello HP community!
I recently received a HP Compaq d530 SFF, from the company, where I had my work experience.
I gladly took their offer and took the PC home, all was going well until I bought myself some new DIMMs, from ebuyer.com.
I new for a fact, the computer needs DDR 333MHz, PC2700 and it had to be in DIMM format, so I went and bought 3x1GB modules. A few days later they arrived and I inserted them into the computer, making sure that two DIMMs were in the blue slots, and the others (I wanted to keep a 256MB module in) in the black slots.
I re-inserted the power cable and tried to boot the PC, it showed me a BIOS message, showing the amount of memory had changed, since the last boot. Once the configuration showed up, it only recognized the 256MB module. I then powered down the computer, to then remove the 256MB module, to see what would happen. I then rebooted the PC and it gave me an error tone (No picture). To which I then (rotatingly) tried each different DIMM, to see if one of them was defect. They all gave me the same error tone. Since then, I have been running Windows Vista Home Premium, with 1GB (4x256MB DIMM).
Does anyone maybe have a suggestion, how to solve this problem?
I have already updated the BIOS version to 02.44 (Latest I could find).
Thanks in advance!
Yours sincerely Simon Cahill
This question was solved.
View Solution.

Beatsleigher,
Not all memory is the same, even when picking PC2700. Did you purchase non-ECC?
Here is a guide on memory config for the D530SSF
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Mega PC865 DELUXE - Problems installing Windows XP Home SP2

Hi - I have a PC865 Deluxe - (celeron 2.8ghz Celeron, 512mb Crucial Ram) - and a Maxtor S-ATA 80GB hard drive - trying to install windows XP Home Edition - and it boots from CD rom and starts the Windows Setup - but it the windows install fails to recognize the hard drive, I've also tried with a seagate 80GB ATA drive and it fails to find that too.
The bios is recognizing the drives fine - just the windows install fails (and as a result eventually comes up saying Unable to mount boot volume).
I have tried the hard drives in another pc (emachines) and windows is quite happy to start installing on that one - just not on the MEGA PC 865. Is this a case of updating the bios to 1.3 - or is there any other possible cause.
Any help would be much appreciated
BB

Many thanks for all your help,
I have just tried a new seagate drive 120GB - and its now installing fine. Thanks for the advice its helped me lot - can now enjoy the new box.
BB

IT help slowing down windows xp home sp2

When clicking IE6 to get to a browers, it's very slow or does not work. When I un-check itune help fron the startup box in msconfig. and re-boot, IE6 works OK. Any solution? I'm using XP Home SP2

Debbie, you may have reasons for using IE, but it's really NOT a good program. It allows all kinds of spyware and other evil issues in WinXP. I HIGHLY recommend using a free alternative such as Firefox. It's much more secure and has many more features.
It could be that something you've downloaded through IE is slowing your computer down, instead of iTunes. I run the same thing you do, with a 1.8 mhz processor, and notice no slowdown what-so-ever.
You may also want to try running some type of spyware catcher to see if that's your issue.
Good luck to you!

10g2 Install problem with Windows XP Home SP2

Greetings, total noob here. I decided to install oracle as a personal growth experiment, following the directions here:
[link]http://www.oracle.com/technology/obe/10gr2_db_single/install/wininst/wininst_otn.htm#a[link]
The database was installed, the users "SH","OE","HR" unlocked.
The only one I can log on with = SH
The POST INSTALLATION instructions tell how to setup a new user that belongs to the group "ORA_DBA" via the Administrative Tools, Computer Management.
Here's a problem - I don't have "Local Users and Groups" available in Computer Management. How can I accomplish this?
Any advice is greatly appreciated.
Thanks in advance,
Dave

Here's a problem - I don't have "Local Users and Groups" available in Computer Management. How can I accomplish this?That's why XP Home isn't supported :-/ You might be able to google for "Users and Groups in XP Home" and hack your way through it. I avoid XP Home like the plague (and don't have any installed) so unfortunately I can't walk you through it.
~Jer

What is the best and fastest browser to use, I have Windows 7 Home Premium, 32 bit version...

if firefox is best, how do I UNinstall internet explorer 8? on my computer

The idea of the best browser is very subjective, people will have different opinions of what is the best. Why not install Firefox and try it to see if you like it.
Do not uninstall Internet Explorer, it is required by some sites, and some applications are hard coded to use IE.

ITunes Version 7.0.2.16 and Windows Vista Home Premium

I am still using iTunes Version 7.0.2.16, and due to my failing computer, I am unable to upgrade to a newer iTunes version.
I am about to replace my old computer and the new computers all seem to come with Windows Vista Home Premium.
Do you know if Windows Vista Home Premium supports iTunes Version 7.0.2.16?
(My plan is to install this old version, copy my music directory across to the new computer, and then upgrade iTunes.)
Any advice would be appreciated.

Yes, you can install itunes 7.0.2.16 on Vista Home Premium.
http://en.wikipedia.org/wiki/ITunesversionhistory

Lenovo Enhanced Experience 2.0 Windows 7 Home Premium 64bit

Hello, sorry for my English, my Windows is slow and I want to reinstall it. But I dont have DVD with original Windows 7 with EE 2.0. On my HDD it is not too. Where can I download original Windows 7 Home Premium 64bit Slovak version with EE 2.0 ? My laptop is Lenovo IdeaPad Z570 blue. Thank you.

welcome to the community.
i would recommend that you call Service to request a factory recovery dvd set.
phone #s here: http://support.lenovo.com/en_US/detail.page?DocID=PD008370
for Slovokia, specifically: +421 2 4974 8888 for Think-branded machines and 0800-197-462 for Idea-branded machines.
hope this helps a bit.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Where can i download windows 7 home premium x64 ?

Hello i have serial key for windows 7 home premium x64 norwegian version. It used to be easy to download from microsoft but now i cannot find the link where can i get this? i want windows 10 but you have to upgrade from there so first i need a new disk
to install it from please help.

Find the below Download Location for your references.
Windows 7 ISO downloads includes SP1 (English Version)
At the sae time download the required device drivers for your laptop.once you download the iso image of the o/s , you can burn it in cd /dvd with the gelp of some good software like roxio,nero etc.

AppleMobileDeviceHelper has stopped working - Windows Vista Home Premium 64

I have iTunes 9.0.1 on my Acer AX1700-U3700A running Windows Vista Home Premium 64-bit version. In case it matters I am using McAfee.
I can connect my iPhone 3G to my computer and iTunes finds it. But whenever I "right click" on the iPhone icon I get the dreaded "AppleMobileDeviceHelper has stopped working". I've followed Apple's uninstall and reinstall instructions twice to no avail. When I try "repairing" AppleMobileDeviceHelper I am told that I don't have the .msi file to repair it from.
I've tried the "Run iTunes as an Administrator" option but I get the same result.
I see some people recommend deleting the AppleMobileDeviceHelper binary altogether but want to make sure I'll be able to still sync my and my wife's iPhones and iPods.
Does Apple had a fix for this?
Is there some settings I need to change in McAfee? I've confirmed that iTunes has "Full Access" through McAfee (I'm only including this as in some other threads some pointed toward their anti-virus applications as part of the trouble.)
Thanks in Advance,

I have iTunes 9.0.1 on my Acer AX1700-U3700A running Windows Vista Home Premium 64-bit version. In case it matters I am using McAfee.
I can connect my iPhone 3G to my computer and iTunes finds it. But whenever I "right click" on the iPhone icon I get the dreaded "AppleMobileDeviceHelper has stopped working". I've followed Apple's uninstall and reinstall instructions twice to no avail. When I try "repairing" AppleMobileDeviceHelper I am told that I don't have the .msi file to repair it from.
I've tried the "Run iTunes as an Administrator" option but I get the same result.
I see some people recommend deleting the AppleMobileDeviceHelper binary altogether but want to make sure I'll be able to still sync my and my wife's iPhones and iPods.
Does Apple had a fix for this?
Is there some settings I need to change in McAfee? I've confirmed that iTunes has "Full Access" through McAfee (I'm only including this as in some other threads some pointed toward their anti-virus applications as part of the trouble.)
Thanks in Advance,

Error message downloading j2se 1.5.0 on windows XP home edition (SP2)

Hello:
I am getting the following error message attempting to install the j2se 5.0 on my windows XP home edition (SP2):
"Error JavaTM installer
The installer cannot continue because the files necessary for installation are unavailable. If trying to install a beta or older version please check http://java.sun.com/j2se to determine if it is still supported. If so please try installing at a later time as these file might be only temporarily unavailable."
There is a bug report:
Bug ID: 6237992
Tested Bundle: 5.0u2_b09 JDK iftw on staging site
http://webwork.sfbay/j2se/1.5.0/download.jsp
Tested O/S: XP-Home (sp2)
Problem:
The installer throws error messages. I tried on three different
XP-Home (sp2) machines in our lab. It throws error message the very first or second time and after that, it seems to work fine.
Steps to reproduce:
1) On XP-Home(sp2) machine, try to download and install the JDK iftw bundle from
http://webwork.sfbay/j2se/1.5.0/download.jsp
2) During the installation the first or second time, one of the following messages thrown:
A) "This installation package could not be opened. Verify that the package exists and than you can access it, or contact the application vendor to verify that this is a valid Windows Installer package"
B) Error - Java Installer
"This installer cannot continue because the files necessary for installation are unavailable. If trying to install a beta or older version, please check http://java.sun.com/j2se to determine if it is still supported. If so, please try installing at a later time, as these files might be only temporary unavailable"
This problem seems to occur on XP-Home(sp2). When error message pops up, keep trying it, it 's eventually OK. It may confuse consumers at the first two times.
xxxxx@xxxxx 2005-03-09 05:11:47 GMT"
I have tried the downloading five times to no avail, both by double clicking, and using the windows run utility. Any ideas would be greatly appreciated.
Thanks

I am getting the same error when opening the J2se Development Kit 5.0 Update 8 after I press the Run button. ( "This installation package could not be opened. Verify that the package exists and than you can access it, or contact the application vendor to verify that this is a valid Windows Installer package").
Is there a solution ?
Thanks,
Luck 08/21/06

WINDOWS XP HOME SP2 portable skype version ?

Similar Messages

Maybe you are looking for