Windows XP is not working after I upgraded to OS X Mavericks

I just upgarded to OS X Mavericks.
I tried to get into windows xp, but it is not working!
It keep asking me to choose safety or normal mode to strat up.
No matter I chose safety mode or normal mode, it will turn to a blue screen and restart.
What can I do if I want to get into XP?
Could I uninstall OS X Mavericks?
or I need to upgrade XP to windows 7?
Will I lost the doucements, photos and songs  in winows XP if I uninstall Mavericks or upgarde to windows 7?
Thanks.

My 09-mid MBP is also having these problem and confusing me. I have already reinstalled to 10.6 but still no hope.
The windows boot stop at error 0c00000130 unknow hard error. the xp was installed with SP2.
Hope someone can help US.

Similar Messages

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
    Do a reset
    restore with back up and if required as new

  • HT6114 My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

    My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

    Have you tried using http://support.apple.com/kb/HT4505 guidance for scanning?  Has always worked for me with my Epson scanner.

  • Left mouse button does not work after last upgrade on one computer.

    Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Forms Personalization not working after R12 upgrade

    Hi,
    We have recently upgraded to R12. We have forms personalizations on the People, Enter and Maintain form and this is not working now after the R12 upgrade.
    I went to one of the form personalizations and Validated and Applied again but it still did not work. I also created a new one but had no success with that either.
    Any ideas how to get this working again ? Is there something extra that needs to be done for R12?
    Thanks
    Regards,
    Shalantha

    Pl indicate which version of R12 and on what form you had the personalization in the previous version. Have you checked FND_FORM_CUSTOM_% tables to ensure that the personalization survived the upgrade ?
    Pl see if these MOS Docs can help
    Forms Personalizations Unavailable After Upgrade To 12.1.x          (Doc ID 1245864.1)
    Forms Personalization Not Working After Upgrade To R12.1.3          (Doc ID 1309458.1)
    Form Personalization Value Field Not Being Retained After Upgrade          (Doc ID 1266265.1)
    Do Personalizations Holdup After A Patch Is Applied? (Doc ID 1286576.1)
    HTH
    Srini

  • HDMI not working after W10 upgrade

    Hi, My HDMI stop working after W10 upgrade. It was working fine before on W7 now i get no signal on my Philips 42" TV.The cable tested on another G61 with W7 found working fine Any clue plz. 

    Does your notebook use switchable graphics of any kind?  We might have the same problem: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Display-Drivers-Windows-10-Cannot-Connect-to-External/td-p/5178882

  • Windows update does not work after using System recovery disk

    I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
    Solved!
    Go to Solution.

    I get errors saying A problem is preventing the troubleshooter from starting.
    That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
       Trouble with reinstall of Win7 64 on a L505-ES5018
    The fix was to install a new hard disk driver.
       Intel Rapid Storage Technology
    -Jerry

  • HT1338 motion 4 will not work after yosemite upgrade

    motion 4 will not work after yosemite upgrade

    To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
    I am afraid the more the OS is updated the less compatible certain applications will become.
    Good Luck
    h

  • Insert in Tabular form does not work after the upgrade to APEX 4.0

    Hi all,
    Thx in advance for looking into the issue.
    We are running into following issue when we upgraded APEX 3.2 to APEX 4.02
    1) The Tabular form insert does not work.
    2) We are fatching the value of the Global variable APEX_APPLICATION.g_XXXX in a procedure and we get null for this value after submit for new row to be inserted.
    The tabular form was working fine in APEX 3.2.
    The Update and Delete works just fine.
    Any help in this regard is highly appreciated.
    Thx and regards,
    Mahesh

    Here is my workaround to get the ADDROW/SUBMIT working again if you have a legacy Tabular Form:
    1     PAGE ATTRIBUTES               
              JAVASCRIPT          
              FUNCTION AND GLOBAL VARIABLE DECLARATION          
                   var htmldb_delete_message='"DELETE_CONFIRM_MSG"';     
    2     DELETE BUTTON               
              ACTION WHEN BUTTON CLICKED          
              URL Target          change to
                   javascript:apex.confirm(htmldb_delete_message,'MULTI_ROW_DELETE');     
    3     ADDROW BUTTON               
              ACTION WHEN BUTTON CLICKED          
              Action           
                   redirect to URL     
              URL Target          
                   javascript:addRow();     
    4     PROCESS               
              APPLYMRU (activitated by button ADDROW)          
              CONDITION          
                   never or delete     
    5     PROCESS               
              ADDROWS          
              CONDITION          
                   never or delete     
    6     CHANGE PAGE TEMPLATE to e.g. THEME 13 One Level Tabs.               
    7     IF YOU WANT ADD FUNCTIONALITY TO GOTO BOTTOM OF PAGE AFTER ADDROW               
         1. In the page footer put <a name="bottom_of_page"></a>                
         2. Amend the action when the "ADD" button is clicked to scroll down to the new region by doing the following:               
         - edit "ADD" button               
         - Go to "Action when button Clicked" section               
         - Amend "URL Target" from               
         javascript:addRow();                
         to               
         javascript:addRow();window.location='#bottom_of_page' ;               
    regards
    PaulP

  • RAID Utility does not work after Vista upgrade

    Hi,
    I have a Qosmio G30 with 2 HD 120GB each. After I upgraded to Windows Vista from Windows XP, the Toshiba RAID Utility does not work anymore. In WXp it worked OK, but in Vista there is no way I can mirror the HD. That is, the utility itself work, but the button that should say Mirror, or something like that is not shown. I have set the drives to RAID-1 in the BIOS, but no go.
    Is there any way to get the software RAID to work again?

    Hi,
    just a little question: While installing vista, did you installed the RAID-driver at installation time? Maybe this could be the reason why RAID cannot be activated properly.
    Please give some feedback, if you installed the RAID drivers for Vista during the installation..
    Cheers

  • Scrolling/other gestures not working after Lion upgrade - Any suggestions?

    So far the only gesture that seems to work on my iMac with Magic Mouse is the two fingered swipe to the left and right to switch between full screen apps / mission control / etc.
    Scolling, double click to open mission control, etc do not work despite options selected in the Mouse preferences pane.
    Have trie swapping mouse over but no joy and my Macbook, which is also upgraded works with no problems.
    Any suggestions to try and get things working would be gratefully received.
    Michael

    I'm using a Logitech Performance MX mouse and after installing Lion, the calibration or whatever is messed up. For example, whereas before I would scroll the wheel on top of the mouse to move down the page or document, doing so now moves me UP the page (and vice versa, scrolling the wheel away from me toward the screen moves me DOWN the page). I don't see a fix for that in System Preferences. I can probably adapt, but should I really have to?
    Yes, I know, Apple wants me to use the trackpad now rather than a mouse. Well, sorry. I am set in my ways.
    When I open the Finder to find a photo, my windows are also inverted. Items that were at the top of the list are now at the bottom and I don't see any way of inverting back as you could before. What the...?

Maybe you are looking for

  • Sort order changes from ios photos to iphoto

    My photos in an album in the the ios Photo app are in a particular order.  When accessed fro iPhoto, the order is completely different.  How can I mantain the original order?

  • Creating a Credit for a DP Invoice

    I need to credit a DP Invoioce that has already been applied to an AR Invoice. Here is the steps I did so far: Cancelled the deposit (opened the Incoming payment) Tried to cancel the incoming payment (gives me an error that I cannot cancel the paymen

  • Using Arrays.asList: Is Array[x] == List.get(x)

    I have an Object[] Array and I wish to remove index 'x' from that Object[] Array. If I use Arrays.asList() passing in the existing Object[] Array I will get new List Object containing the objects from the Object[] Array. Is it guaranteed that index '

  • IPad 3rd gen not charging via wall socket

    Ok I'm really annoyed right now, my iPad 3rd gen has suddenly decided not to charge when plugged via adapter to the wall socket. I thought it was the cables fault so I went into the currys store and bought an apple charger, came home and I have the s

  • How do i find out what cabinet im connected to?

    Is there a website where I can enter my postcode or house no. and post code? And get a google maps view?