Windows XP laptop will not recognize Express card V740

I do not have the original install CD that came with this Qualcom Express card. I have downloaded the Verizon Access manager. The laptop will not recognize the card. In Device Manager there are yellow question marks which indicate the drivers are needed.
I have searched this site as well as the internet and I an unable to find the drivers for this card.
Any help would be appreciated!
SFerrara
Verizon BroadbandAccess
National Access
V740
Express card 34
Qualcom 3G CMNA

Hi AtlantaGuy.  I am sorry you are unable to find the drivers for your wireless device.  I will be happy to help you further.  Since you do not have the disc, go to www.vzam.net
Once you do that, on the left, click on "Supported Devices".
Search for your specific device and click on the link under the column with your version of windows.
It will then take you through the steps to download the drivers specific to your device.
Please let me know if this works for you.   I am here to help
Thanks!

Similar Messages

  • TS1369 My windows 8 laptop will not recognize my iphone 4 ...I have deleted itunes and re-installed it ...I have updated my phone, I have checked my cables. I don't know of anything else to do...I have only had this phone for about 1 month.

    I have no idea what else to do to fix this problem, does anyone else?

    Mountain Lion is OS X 10.8
    10.6 was called Snow Leopard.
    To use iTunes 10.7 the following is required:
    Macintosh System Requirements
    Mac computer with an Intel Core processor and 512MB of RAM
    OS X version 10.6.8 or later
    Safari 4.0.3 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Do you use iTunes Match?
    That way all of your songs would be matched with the master song on the iTunes servers independently of iTunes on your Mac or PC...
    Look here for further information: http://www.apple.com/itunes/itunes-match/

  • HT1379 Summary: how to transfer files from SD card when the system (Mac OS X v 10.7.5) will NOT recognize SD cards.

    How to transfer files from SD card when the system (Mac OS X v 10.7.5) will NOT recognize SD cards?
    Insert the SD card.
    System opens iPhoto with SD contents.
    Want to transfer files from SD card to system drive.  iPhoto closes
    SD card directory removed from the Finder window and is not available again. 
    I don't want to have to reboot the system every time I want to perform this option.
    What's wrong here. 
    The support columns show this isn't an isolated incident with all sorts of solutions possible.
    This is a simple task - there should be a simple method for the system to recognize SD cards.
    What's the answer?
    I've reviewed a recommendation to reset the SMC.
    https://discussions.apple.com/message/18500187#18500187
    and
    http://support.apple.com/kb/HT3964
    and another thread that says, basically, you must buy extra hardware to perform this simple task,
    https://discussions.apple.com/message/16911326#16911326
    another one that has the same problem with OS Mountian Lion,
    https://discussions.apple.com/message/21919740#21919740
    another one with the problem that says SD cards can't be read by Apple unless the card is formatted specifically for Apple, ie. that Apple is not compatible with other cards, but the problem maybe something else that requires Apple service - (bad SD card reader?).
    https://discussions.apple.com/message/18711818#18711818
    there are probably more discussions, but I dont' want to spend my entire sunny in Seattle day working this.
    thanks for the help!

    Bucky Fullmeister wrote:
    When I plug in an SD card, the finder window shows it under the DEVICES section.  At this point, I can drag the contents to the hard drive.  However, when I screw up and click the character on the right side of the name - it apparently closes the SD card and I can't find any command to reload or re-recognize the card.  I have to remove and reinsert the card and then sometimes it recognizes the card.  Other times I reboot and it will recognize it.
    What does that character on the right side of the SD card name do?  Is it an eject function - with no way to subsequently reread the drive?
    It ejects or unmounts the card. When the SD card mounts click on it once to highlight it and then drag the files shown within it to the new folder.
    Pete

  • EMac on OS 10.2.8 will not recognize Airport Card

    OK, I'm not loving Mac so much any more . . .
    Here's my situation, please feel free to talk down (way down) to me:
    Have eMac OS 10.2.8
    Very recently bought iBook running Tiger
    Bought Airport Express
    Bought Airport Card so eMac can go wireless and share connection on Airport Express with iBook.
    eMac will not recognize Airport card, and I've followed ALL the steps numerous times in all the support online here and NOTHING.
    What am I doing wrong?
    Do I need to upgrade my OS to something higher? If so, WHAT? No salesperson OR tech support person has told me to do this when I tell them I'm on currently running 10.2.8 . . . I am tearing my hair out.
    Every time I call, I'm told buy this. Then, it doesn't work, and I'm told, "I dunno who told you that, but that's wrong. You need this." Hafta go through return process. I buy the next thing they tell me, it doesn't work.
    I appreciate any guidance you can give me and again, I'm not techno savvy, so talking in the most simplistic terms is awesome!!!!!

    Unfortunately, I'm not sure how to proceed--I ran "software update", and nothing turned up.
    I tried to install Airport Express/iTunes software, and it told me I needed 10.3
    OK, so I installed Airport Extreme, which came with the Airport Extreme card, and it gave me an option to install for 10.2.3 or 10.3, which I don't have, so I went for 10.2.3
    Installed the airport card as instructed on this site in help/support areas.
    Nothing.
    I ran "software update" as you suggested, and it found nothing, so I must apologize that I am not certain exactly what to do now . . .

  • My Laptop will not recognize my Ipod

    I got my new ipod touch 4g and i tryed to connect it to my laptop but mid syncing my laptop froze, now my laptop will not recognize my ipod at all.
    Please help me with this issue.

    you really should start your own thread because hijacking another user's thread is frowned upon round here
    anyhoo, maybe [this|http://support.apple.com/kb/TS1538] support article article can help.
    JGG

  • Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number.  Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?

    Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number.  Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?  Do I have to buy an Apple Keyboard to get it to work right out of the box?

    Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
    Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to?

  • I upgraded iphone 3gs to ios6 but now iphone will not recognize SIM card

    Hi,
    I upgraded both ipad 2 and iphone 3gs to ios6. I don't see any issue with ipad 2 but now iphone will not recognize SIM card. "Please insert a SIM card" message

    You say "... but now panorama is not working".  Panorama never was supposed to work before iOS 6, so you'll be using it for the first time with iOS 6.
    The way to enable panorama is to open the camera, click the "options" button at the top center, and select panorama.
    Does this work on your iPhone?  If not, what symptoms of failure do you experience?

  • Iphone 5s will not recognize sim card

    After updating to 8.1.1 iphone will not recognize sim card. Gives no service. Did reset all from the iphone since I couldn't use itune. Will appreciate assistance. This thing is driving me crazy

    Hello hnajee,
    The article linked below details a number of additional troubleshooting steps that may help restore your iPhone's ability to connect to your carrier's network.
    If you see No Service in the status bar of your iPhone or iPad
    http://support.apple.com/en-us/TS4429
    Cheers,
    Allen

  • I have a new wireless router and now my laptop will not recognize the printer.

    I recently installed a new wireless router,Linksys E2500, and now my laptop will not connect to my OfficeJet 4500 wireless printer.  Operating system is Windows XP.  Says it does not recognize the printer.  It was working fine with my other Linksys router and I have been able to connect all of my other electronic equipment.  Thanks.

    You must reinstall the full feature software and drivers again to be sure it will work with the new router.  This is the fastest way.  Simply follow the instructions that came with the printer.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Tungsten E2 will not recognize SD card

    I am writing in regards to a Palm Tungsten E2 which I received for Christmas. This device was purchased from the Palm store in November, but not opened until Christmas. The problem is that the device will not recognize a SD card when inserted. I am using new SanDisk 512 Mb, and 1 Gb SD cards. When I go to card information in the Applications menu, it says "no card inserted".  Also, there is no sound when the card is inserted, though it will turn the device on, which indicates that there is some form of recognition. I have checked under Preferences and the sound option is on. Also, I have checked and the card is in the unlocked position. Any advice that you can give me would be greatly appreciated. I have been a Palm user for more than seven years now, first with the Palm 500 and then with the Zire 71. I use it extensively for work and am lost when I don't have it. 
    Post relates to: Tungsten E2
    Post relates to: Tungsten E2

    The easiest way is to connect the SD card to a computer using an SD card reader. Most laptops have them built in.
    Post relates to: Treo 800w (Sprint)

  • My ipod classic turns on with apple logo then shuts off about 30 seconds later, when plugged in my windows and itunes will not recognize it.

    earlier my itunes told me that my files were corrupted and I needed to restore, so I did.  In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod on it only shows the apple logo then shuts off after 30 seconds.  If it is plugged in it will charge, but Itunes and Windows will not recognize it.  I have tried the menu + select shutoff multiple times with no change.  All it will say while it is charging is do not disconnect.

    The clicking sound is your iPod Hardisk, trying to retract and find the boot sector unsuccesfully.
    Hopefully, you can do the iPod Disk Diagnostic as in this great post by tt2., it wont fix your problem, but let you know, how dire is your Hardisk health.
    So only as a last resort, one way, to get the stuck Hardisk head free, is to bang the iPod on a rubber mouse pad, when you reset it, but do it at your own risk, some very lucky guys got it working again for the next 14 months, like myself.

  • Turn iPhone 4s into iPod Touch - will not recognize sim card

    My iPhone 4s will no longer recognize a sim card. I didn't trade it in b/c the Apple salesperson said I could still use it as an iPod touch. (I want to use it at home to play Pandora/iTunes/Sirius over wifi to bluetooth speaker.) The salesperson did not warn me not to reset the phone.
    After completing the reset, it will not allow me get past the "no sim card" message. How can I bypass this in order to use the phone as an iPod?

    Yes - I took it to ATT and they put in 2 different new sim cards. It will not recognize them at all. I took it to Apple and they said it was hardware (though after reading other discussions here, I am more suspicious of iOS 7).
    They offered a trade in but I asked if I could still use it as an iPod touch. The genius dude said yes, but did not not tell me I could never reset it. Very frustrated.

  • BERRY WILL NOT RECOGNIZE MEDIA CARD.

    I have a Blackberry Curve 8320 from T-Mobile. I upgraded the system software to 4.5.081 and every thing works fine.  I have a Scandisk 4gb micro sdhc card in the berry.  I sold my old phone and had to pull the sim card from the berry  to clear the old phone before I sold it. Prior to this everything worked fine.
    Now I put the Sim card and media card back in the berry and it will not recognize the Media card.  Tried to reformat the card and I get a message "card not readable".  This card worked fine for a month until today, and that's with the system up grade.
    Did anyone ever experience this?

    Welcome to Forum!
    Did you try doing this? This is all I know about the formattin cards? There will be more  help soon on the way!
     Format Card  If you are using your card it might be best to put the card in a reader and transfer everything to your pc first. Then with the card back in the BB gob to Options>Media Card>Menu>Format Card. If that works just transfer all your files back.
    Nurse-Berry
    Follow NurseBerry08 on Twitter

  • Windows 7 laptop does not recognize iphone 4 connection, does anyone have the same problem?

    I recently bought my brother's iphone 4 from him and connected to my computer and downloaded some pictures. Now, however when i connect it says my phone is charging but my windows 7 laptop doesn't recognize my phone, can anyone help me please???

    http://support.apple.com/kb/TS1538

  • My printer will not recognize greeting card stock and I cannot use card programs.

    I have changed all of the necessary thing when loading card stock into the printer, and yet the printer asks for paper.  It doesn't recognize the card stock and I cannot use any of my greeting card programs.

    You are not alone with this issue. I wish that HP would accept the fact that printing with card stock is an issue that needs to be addressed and corrected. My Officejet 8600 Plus will not pick up nor print any weight (67 or 110) card stock. It is listed in their specifications that it will! Neither Best Buy or Office Depot could get their display units to print card stock either. Under troubleshooting they list a series of steps that do not apply to the basic problem. When trying to print to card stock you receive a "Out of Paper" error message. It is a known issue and not being addressed. I just posted this same problem so will see what comes back and stay in touch.

Maybe you are looking for