Windows XP long booting

Hi fellas
I am having a small problem with my board lately, here is the deal.
I deside to add 2 WD Raptors 74GB on stripe raid 0 on my system make a total of 6 Hard Drives and 2 DVD Burners, but since I put the Raid function on I am having a boot delay about 2-3 minutes before the boot windows logo appears.
There is no conflicts and the hardwae detection is prety fast, but when its time for windows XP to boot, then I have to wait 2-3 minutes on blank screen until the moving bar of windows appear.
After that my computers flys and it rock stable, but if i have to reboot, something that windows require 2-3 time a day then its getting
Here Is my configuration
PSU or power supply 550 W
For Intel Controller
PATA Primary Master: Maxtor 60GB Primary Slave: Maxtor 40Gb
Secontary Master: NEC DVD-R/RW Secontary Slave: SONY DVD-R/RW
SATA 2 Western Digital Raptors 74GB on Raid arrey stripe 0
ATI Radeon 9700 Pro
Sound Blaster Audigy 2 Platinum
Maxtor UATA 133 Controller with
Primary Master: Maxtor 120GB Primary Slave: Maxtor 40Gb
Secontary Master: YAMAHA CD-R/RW
1 GB ram PC 3200 XMS Series
Intel 3.2 Ghz Presscot
I think thats it..
Please any ideas ti increase my Boot up speed or eliminate it, are more than welcome
Thank you

Did you install IAA for your SATA RAID?

Similar Messages

New partition & windows no longer boots

Hey all, up until now i have had 3 partitions on my drive - Snow leopard, General media and Windows 7. I decided to add a linux partition and made a new partition using disk utility. I boot up to the choose disk screen to install ubuntu to find that windows is no longer an option for boot up, so i deleted the new partition and it still won't boot into windows anymore.
How can i restore the booting function? Doing it with a linux partition too would be preferable but it isn't necessary.
Thanks,
Brad

Hi Brad and welcome to Discussions,
Hi John,
A later done partitioning to add additional partitions to a harddisk alters the position of the BootCamp partition in the partition table so that the Windows Bootloader can not 'find' the Windows partition.
With Windows XP it helped to simply edit the Boot.Ini file and point it to the WIndows partition.
With Vista and Windows 7 there no longer is a boot.ini but EasyBCD http://neosmart.net/dl.php?id=1 can do the same.
One thing to remember though is, that even Vista and Windows 7 'suffer' from the limitation of four partitions on one harddisk immenent to the Master Boot Record (MBR) since Apples EFI/GPT/MBR emulation can not handle Extended Partitions and Logical Partitions inside an Extended Partition.
Regards
Stefan

Windows no longer boots up, paging file error

I just reinstalled windows on my mac last week because until now I had been running the old beta version of boot camp.
Just a few days ago I started getting blue screens every so often and it happened again (twice to be exact) yesterday, however one of the times it booted up and informed me I might want to change my paging file size. Not quite sure what this was I went and found the paging file option in settings and found it was clicked on a set size...so I figured I'd set it on the option that lets windows decide for me hoping this would fix the blue screen problem.
I shut down my computer later that night and now windows won't get to the desktop.
When I start it up normally it runs the system check (which I cannot skip for some reason) which gets to 84% and then says \windows\Dump3865.tmp is cross-linked on allocation unit 1731772
Above it it mentions there is an invalid size for my page file.
I tried booting it up the in safe mode multiple times and every time it generates a list in dos and stops on windows\system32\Drivers\mup.sys
I really don't want to have to reload windows again. Is there anyway to skip the system check (it says press anykey, but that has never worked for me) or any other way to get my paging files back to the way they were?
Thank you.
Oh I'm running leopard with windows XP professional on a macbook pro (last years model) if that helps in anyway.
Message was edited by: Tommmmm

A. run chkdsk
B. What happens if you boot from XP CD and Repair System
C. system file checker - from command "sfc /scannow"
http://www.informationweek.com/news/windows/showArticle.jhtml?articleID=18530125 1
http://windowshelp.microsoft.com/Windows/en-US/Help/f768809f-ed90-415f-a83f-89b4 2108b3551033.mspx

Windows 7 no longer boots after upgrade from Lion to Mountain Lion

I got a late 2011 MacBook Pro, on which I installed Windows 7 with Boot Camp. After I upgraded from Lion to Mountain Lion, I can no longer boot Windows. If I keep the option button pressed during boot I only get the OS X and recovery options, and if I choose to boot Windows from the system preferences pane, I get a message that says that no bootable device was found. However, I'm sure that the partition is still there, because I can see it in finder and browse the files normally. How can I boot Windows again?

"Easier" in this case as an alternative is defined as repartitioning/reformatting your disk, and restoring from backups (which for most people also means starting from scratch with Boot Camp Assistant and Windows since most users aren't backing that environment up).
What you did is, in my opinion, easier and faster. But if you don't know what you're doing can lead to data loss. But then, by definition, blowing away your disk and starting over with a restored backup begins with data loss!

I can no longer boot up in osx after installing windows 7 with bootcamp

After installing windows 7 with boot camp I am no longer able to access my osx side, I do not receive an option when holding alt when turning on my MacBook

What options do you get? If you don't get any options then you may not be pressing and holding the option key long enough or you are pressing it too early or too late.

Resizing Windows Partition - No Longer Booting

Whenever I attempt to setup a Windows/Linux Dual boot I get hit with this same dilemma. I start off with a NTFS format partition with Windows XP on it. As soon as I resize the partition, it no longer boots. Even before installing linux/grub. I defragmented before attempting this, and I took every precaution. In the end, I'm never able to boot my Windows OS. I can boot Linux from the Grub menu, and I can still access my Windows files.
As of now I've reformatted back to Windows. I would just like to know what went wrong because I want to attempt another install later on.

Ward,
windows is weird in that it notes somewhere the block numbers where the system is installed, and when that moves
it does not boot anymore.
Now you are making life more complicated then necessary: if you still have windows resized and installed (and not booting),
you can use the windows install cd and go into repair mode. It will fix the resized windows.
If you are starting from scratch, before installing windows, start a Linux live CD, do not install it, start the program
"gparted" and partition your disk as you want it. Then install windows in one of the partitions.
Instead of the Linux live CD you can also use a Gparted stand alone CD:
http://gparted.sourceforge.net/livecd.php
Hope it helps.
Mektub

FreeBSD didn't install, i can no longer boot into Windows

I unsuccessfully installed FreeBSD and I can no longer boot into an OS from the HD. I attempted to install BSD onto the "G" drive below however the the install gave me some kind of storage error and I can no longer boot into Windows. While going through the BSD installation process I opted to NOT install a boot manager (I incorrectly assumed that this would leave my existing boot manager intact).
Here's how I was partitioned pre-FreeBSD (these are all partitions on the same SATA 80GB drive):
C:\ Windows ME
D:\ Windows XP sp1a
E:\ Windows XP-64 beta
F:\ Longhorn 64 preview
[G]:\ unpartitioned 4GB
[F]:\ uformatted 4GB
H:\ NTFS Storage
I:\ FAT32 Storage
Before I attempted to install BSD, I used c:\boot.ini as my boot manager.
Now when I try to boot it says:
Code: [Select]
Invalid Partition
Invalid Partition
No /boot/loader
FreeBSD/i386 boot
Default: 0:ad(0,a)/kernel
boot:
Invalid Partition
No /kernel
FreeBSD/i386 boot
Default: 0:ad(0,a)/kernel
boot: _
Has anyone else ever had this happen to them? If so how can I reenable booting into Windows?

Hi
You got a prob I think, if you can boot a windows, MSconfig, startup options might restore the boot files.Only other thing is to try and either load a new windows and let it setup a boot file, or perhaps a win98 startup disk, and fdisk, then set active partiton, which will set an MBR. But that would leave a load of work to do, I think I'd opt for an install of XP, and let it repair existing installation, and make a new boot file.
Hope you don't need the info on disks. If you do, I would install another HDD, load XP, then copy original Disk to save place.
Good luck
Jocko

Previously working Windows 7 Pro 64 bit will no longer boot

Came in this morning and the Mac side of things was showing on my monitors. When I left last night it was in Windows. Tried to reboot into windows and after using option to bring up the boot choices in start up I clicked on windows. Nothing happens, or rather I loose control of the mouse and keyboard but it never boots into Windows. Tried setting the boot camp partition as the startup disk same thing. Put the Win 7 Pro disk in optical drive and selected it on restart and it does the same thing. It appears to try to boot but nothing hapens. The screen remains at the choose disk display. The only way to get out of it is to hard reset.
I have not done any thing to the partitions or really anything I can think of that might cause this. I have been using this configuration for over a year now with no issues.
Anyone have any ideas?
Thanks

I've had PCIe controllers in my Mac Pro and PC prevent booting, Once a corrupt Windows boot drive (not even the main Windows drive but on one of the SATA ports nonetheless) and could not boot.
Windows immediately after boot when I put it in said it needed repair and went ahead and did so. Now that is something Mac will not do.
I tested it thoroughly with WD Lifeguard to insure no bad sectors or issues with the drive (healthy and did full format and extended tests)
Removing anything attached is a whole lot easier. Glad you found it.
Those symptoms say "hardware" -
Put the Win 7 Pro disk in optical drive and selected it on restart and it does the same thing. It appears to try to boot but nothing hapens.

Z77A-GD65 no longer boots with 4 RAM modules

I had 4 x 8GB Cosair Vengeance LP that used to work fine, but no longer boots into Windows with 4 but only with 2 RAM modules. Any help in solving the issue would be appreciated. ( I need 32 GB as I run many virtual machines )
The 4 modules worked fine for few months until couple weeks ago, when I saw issues with booting into Windows 7. The workaround was to "warm up" by leaving the PC in BIOS for about 5 minutes and it would boot fine. Since couple days ago, it would POST but not boot into Windows or into live Linux on USB, so I started troubleshooting with bare bones first ( MB, CPU, 1 RAM, PS ) and then starting adding more and more components until I found that 1 and 2 RAM modules worked in either black or blue rail but with 4 RAM modules, it will POST, but not boot at all into either USB based live system or into Windows 7.
Memtest with 2 separate sets of modules pass with flying colors. Mixing the sets work fine too, but add 2nd set (i.e. 4 modules) and it fails to boot. I am leaning more toward believing the issue is with the MB than with the RAM since mixing them doesn't throw any memory error.
Any suggestion on how to check if it's the RAM or MB ?

Quote from: PirateDog on 25-November-13, 00:23:30
If these were 2 kits mixed, ...
These were 2 mixed kits.
Quote from: XFM on 25-November-13, 07:01:42
What voltage is the RAM running? A slight bump up in voltage might help.
As to voltage, I started with standard 1.5 and then incrementally upped it to 1.65v. At 1.6v and above, it does boot into Windows, but intermittently goes into BSOD... Works perfect with 1.5v with 2 RAM modules.
I'll save the money for next build instead of going for 32GB kit. ... guess I'll live with 16GB for now.
Thank you all for the advice.

SATA drive no longer boots

The PC was running fine for about two weeks with a single 160GB SATA drive.
One morning, with no hardware changes, the PC refused to boot. A blue screen of death flashed very quickly past as the PC rebooted. Windows suggested safe mode, and when I booted into safe mode the PC stopped loading drivers immediately after mup.sys. I've had this problem before with mup.sys on other PCs (I believe the real problem is the ACPI driver loaded immediately after mup.sys). In any case the solution is usually to remove any hardware or, in the worst case, re-install XP.
Running windows XP setup from CD it will no longer re-install onto the SATA hard drive. Even the recovery console will not work, claiming there is a problem with the drive. I know that the drive is not dead, because it gets as far as trying to install the ACPI driver.
Install a ATA HDD, installing XP on to it. Ran SP1 and all the updates. The ATA HDD worked OK until I plugged in the SATA HDD, which caused the new version of XP to hang at the mup.sys driver again. Disabled the SATA controller, and then everything works again. Ran all the updates for the motherboard and BIOS but that did not help. Switched SATA cables but did not help. Tried the SATA RAID controller but that did not make any difference. Variously tried disabling everything I could in the BIOS setup but that made no difference.
Now, I know that my no-name RAM might be a bit dodgy, and the PSU a little wimpy, but the PC works fine as long as the SATA HDD is either disabled or not plugged in. It actually ran perfectly for two weeks, and I was surprised how cool the CPU runs.
I looks like the next step is to try another SATA HDD, then PSU, then motherboard, but is there anything else which might help my situation before I go out and buy those items?

Well, it turns out it was the SATA HDD, and it seems to be repaired.
The method was to boot Windows XP from another HDD into safe mode and repair the drive. Windows would not boot from the SATA HDD at all, nor run in safe mode. When booted from the other HDD Windows would not access the SATA HDD normally, but would for some reason in safe mode. There must be a difference between the SATA drivers used in safe mode vs regular mode.
CheckDisk found many cross linked files and fixed them (took about an hour) and now the SATA HDD looks like it is working.
How did the file system get damaged? Good question, since I have never seen NTFS get messed up like this. In any case I'm probably going to replace the HDD in case it was the controller.

How do I transfer an Itunes library from my Ipod to a library on a new computer? The original library was built on a laptop that no longer boots.

I built an Itunes library for my Shuffle on an old laptop which no longer boots. I have since built a new library on my main computer and want to transfer the library that is still on the Ipod to the new library so I can add some new tunes. How do I do that? Thanks!

You can't transfer song files from iPod to computer using iTunes, except for songs purchased from the iTunes Store (and you can also re-download purchases on the iTunes Store Purchased page). However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your new computer, drag the files (or the folder containing the files) to the iTunes window to add them to the iTunes library.

Windows Refuses to boot from 2 brand new Macbook pro 13 2011 model laptops

I'm having the same problem.
I bought a macbook pro 13inch 2.3 ghz core i5 base model yesterday. I gave it the normal windows partition as i normally do with all my macs and tried to install Win7.
The installation was ok except that it took the macbook pro like 40 seconds to finish showing the Black screen with the blinking cursor .
I then Installed Bootcamp 3.2 and restarted, it took its normal 40 secs to show the black screen and blinking cursor after i had selected windows to boot and then it restarted!
I tried 4-6 times but it keeps giving me the same result.
I then reformatted 4 times both the Windows and Mac partitions and tried to repeat the windows installation but it kept giving me the same result.
A friend of mine bought his macbook pro 13 base model today and when i tried installing, it gives the same result! What is wrong?
I then installed Parallels 6 on both laptops and immediately it booted the already installed windows partition.(*but i don't want to use parallels )
But when i restart and hold down the option key and choose windows, it keeps giving me the black screen with the blinking cursor and the restarts itself.
I have used 10 or more macbook pros and airs in the past and they've never given me this sort of problem.
What is wrong???

Having Windows on GPT and EFI; not having default OS set to Windows.
Having boot options in msconfig set to default (30 seconds) instead of reducing to 5 seconds (if present, it may not be).
40 seconds is slightly longer I guess for you than OS X but people with trouble are reporting 1-4 minutes. I think 40 is in normal range.

Can no longer boot into Mavericks 10.9.5

My problem is that I can no longer boot into Mavericks 10.9.5 on my mid-2012 Macbook Pro. The problem arose suddenly without any known major changes to my software or hardware. The booting process freezes with the apple visible and the circle below it spinning endlessly. Every several seconds, the display very briefly gets brighter, then the circle starts spinning again and the process repeats itself. It never gets to the user login screen.
Other than keeping various apps up to date, I don't recall any recent major operating system or other major software updates, nor have I made any recent hardware changes. I've searched a multitude of threads and and tried any number of fixes without success. Here's what I've tried so far (and probably a few more that I can't remember): (1) Repaired the startup disk with both Recovery HD -> Disk Utility and single-user mode -> /sbin/fsck -fy; (2) Repaired the startup disk permissions with Recovery HD -> Disk Utility; (3) Reloaded the Mavericks 10.9.5 operating system twice; (4) deleted /Library/Preferences/com.apple.loginwindow.plist; (5) reset PRAM and NVRAM; (6) booted with "D" pressed and ran the Apple hardware test, which ran for about 40 minutes and reported no problems; (7) tried booting from a bootable clone of Mavericks 10.9.5 on an external hard drive, which also failed at the same place with the apple showing and the circle below it spinning endlessly. ***Oddly, I am able to boot from a bootable clone of Mountain Lion on an external hard drive. It's Mavericks that won't boot.***
Here is the part of the system log the repeats itself over and over and seems to correlate with the repeated failed attempts to complete the booting process. Any help would be appreciated beyond words:
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Server is starting up
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 retained (2 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (1 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 retained (2 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: init_page_flip: page flip mode is on
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 54 modes for display 0x00000000 [54, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 51 modes for display 0x00000000 [51, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 --- last message repeated 1 time ---
May 2 12:49:01 SCH-MacBookPro kernel[0]: IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 343
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: mux_initialize: Mode is dynamic
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 54 modes for display 0x00000000 [54, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 51 modes for display 0x00000000 [51, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: WSMachineUsesNewStyleMirroring: true
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: MPServiceForDisplayDevice: Invalid device alias (0)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: GL mask 0x10; bounds (0, 0)[2560 x 1440], 51 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162f0ab5, Unit 4, Rotation 0
UUID 0x3ef17c2fc9ab601507ec022fbd95576c
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[4096 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f0041: GL mask 0x20; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: GL mask 0x5; bounds (2560, 0)[1680 x 1050], 54 modes available
Active, on-line, enabled, built-in, boot, Vendor 610, Model a005, S/N 0, Unit 2, Rotation 0
UUID 0xde23f9c1cf7b915b2afe83aecee77b54
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: WSSetWindowTransform: Singular matrix
May 2 12:49:01 --- last message repeated 1 time ---
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: GL mask 0x10; bounds (0, 0)[2560 x 1440], 51 modes available
Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162f0ab5, Unit 4, Rotation 0
UUID 0x3ef17c2fc9ab601507ec022fbd95576c
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003d: GL mask 0x2; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f0041: GL mask 0x20; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003f: GL mask 0x8; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: GL mask 0x5; bounds (435, -1050)[1680 x 1050], 54 modes available
Active, on-line, enabled, built-in, boot, Vendor 610, Model a005, S/N 0, Unit 2, Rotation 0
UUID 0xde23f9c1cf7b915b2afe83aecee77b54
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXPerformInitialDisplayConfiguration
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x04248378: Unit 4; Vendor 0x610 Model 0x9227 S/N 372181685 Dimensions 23.50 x 13.23; online enabled, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f0041: Unit 5; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x04280142: Unit 2; Alias(2, 0x5); Vendor 0x610 Model 0xa005 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (435,-1050)[1680 x 1050], Rotation 0, Resolution 1
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXMuxBoot: Boot normal
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000003, accelerator 0x00004f2f, unit 0, caps QEX|MIPMAP, vram 1024 MB
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000003, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000003c, accelerator 0x00004907, unit 2, caps QEX|MIPMAP, vram 1024 MB
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000003c, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor enabled for tile size [256 x 256]
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXGLInitMipMap: mip map mode is on
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: Unit 4; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: Unit 2; ColorProfile { 3, "Color LCD"}; TransferTable (256, 12)
May 2 12:49:01 SCH-MacBookPro.local launchctl[356]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
May 2 12:49:01 SCH-MacBookPro.local launchctl[356]: com.apple.findmymacmessenger: Already loaded
May 2 12:49:01 SCH-MacBookPro.local com.apple.SecurityServer[23]: Session 100021 created
May 2 12:49:01 SCH-MacBookPro.local UserEventAgent[357]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
May 2 12:49:01 SCH-MacBookPro.local airportd[71]: _doAutoJoin: Already associated to “schuyler”. Bailing on auto-join.
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Setting the initial value of the magsave brightness level 1
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Login Window Started Security Agent
May 2 12:49:01 SCH-MacBookPro.local ManagedClient[362]: ApplePersistence=YES
May 2 12:49:01 SCH-MacBookPro.local SecurityAgent[363]: Failed to create agent mechanism, failing authentication!
May 2 12:49:01 SCH-MacBookPro.local com.apple.authd[84]: engine[353]: error creating mechanism agent
May 2 12:49:01 SCH-MacBookPro.local com.apple.authd[84]: engine[353]: evaluate returned -60008 returning errAuthorizationInternal
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Login Window - Returned from Security Agent
May 2 12:49:01 SCH-MacBookPro.local loginwindow[353]: ERROR | -[LoginApp performAuthPluginRequest:] | AuthorizationRef doesn't have a username. Exiting.
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (1 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (0 references)
May 2 12:49:01 SCH-MacBookPro.local WindowServer[354]: loginwindow connection closed; closing server.
May 2 12:49:03 SCH-MacBookPro com.apple.launchd[1] (com.apple.loginwindow): Throttling respawn: Will start in 1 seconds
May 2 12:49:04 SCH-MacBookPro.local loginwindow[364]: Login Window Application Started
May 2 12:49:04 SCH-MacBookPro com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 7 seconds

Hi
You got a prob I think, if you can boot a windows, MSconfig, startup options might restore the boot files.Only other thing is to try and either load a new windows and let it setup a boot file, or perhaps a win98 startup disk, and fdisk, then set active partiton, which will set an MBR. But that would leave a load of work to do, I think I'd opt for an install of XP, and let it repair existing installation, and make a new boot file.
Hope you don't need the info on disks. If you do, I would install another HDD, load XP, then copy original Disk to save place.
Good luck
Jocko

Can no longer boot to MacOSX after bootcamp install

Hello all, I have an issue to where I can no longer boot into the Mac OSX partition after what appears to be a failed Windows bootcamp install. As I was running the bootcamp assistant process, a reboot occurred and I was greeted with the "No bootable device -- insert boot disk and press any key". I have no idea how to get past this and boot back to OSX.
Things I have tried:
Holding down the "option" key does nothing, even using a USB keyboard
Resetting PRAM (CMD + OPT + P + R) does nothing, even with USB keyboard
I have put in a MAC OSX 10.7 Disk and cannot boot to disk using CMD + C on startup
I also pulled the hard drive out and connected it to another PC and wiped the drive completely. I put it back in the macbook and I am still presented with this error. It seems, even though I get the Mac startup tone, that it is stuck in which ever OS it tried to run previously, that being Windows. Not sure why I am still receiving this error even after wiping the drive completely clean.
As far as hardware goes, I am pretty sure its a late 2010 Alumn. Macbook Pro. I cant get the current model number since I cant boot the OS. Any help is appreciated.

Please reset SMC as well.
You can get the serial number from the back cover and use https://selfsolve.apple.com/agreementWarrantyDynamic.do to find the model.

Lenovo T60p no longer boots

Greetings,
Well, now that I have repaired the fan problem, I am afraid I have created one.
My T60p originally had a drive with two partitions on it. A 90GB primary partition, and a 5GB secondary partition. Since I had to re-install the OS, the 5GB partition is no longer in use.
I tried to user Hirens utilities like Fdisk to see if I could use the space. I tried formating the space with an NTFS file system. That is all I did. Since then, the machine no longer boots.
However, using Hirens utilities, and instead of booting with the Hirens disk, I choose to boot from the hard drive, using NTFS. The machine booted fine so all my information is there.
How do I get it to boot without the Hirens disk now? It no longer gives me access to the programs that were on the disk....
Regards,
Jean-Pierre
P.S. I am trying to fix this myself, as with all issues on my laptop, before I take it to the Geek Squad. Thank you
for your input.
Here are the specs of the machine.
Thinkpad T60p
2007-8EU
Moderator Note; s/n edited for member's own protection
Solved!
Go to Solution.

Hello,
It sounds like the primary partition may no longer be marked as "startable" or "active" in the partition table of data located at the end of the master boot record, which is what the MBR code uses to determine which partition's boot sector to load.
If you have a Windows XP installation disc, you can try booting from that, starting the Recovery Console (instead of an operating system installation) and using the FixMBR and FixBoot commands to repair the MBR and boot sector (for good measure), respectively.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows XP long booting

Similar Messages

Maybe you are looking for