Windows XP machine at work reboots while trying to connect to iPhone 3G
Hi,
I have set up successfully my personal lap top and everything works fine with Sony Vaio laptop. BUT when i tried to connect to my office PC to sync my schedules, the machine just keeps on restarting as soon as iPhone 3G starts to connect. This is a Windows XP Professional machine.
It has USB 2 and initially the error reported had advised to run a driver utility from Dell (machine is Dell Optiplex GX620), which in turn suggested upgrading drivers. I did all this and next came the instruction to update the web cam driver, which also was done.
Machine was running XP SP2 which was updated to SP3 today, but no change in status. The phone just restarts the machine every time i try connecting. Task bar bubble indicates iPhone USB driver etc etc but then suddenly kaput!
Tried different USB ports (front and rear) but no changes. I have admin access to this machine.
Any help to resolve this issue will be appreciated.
Thanks.
this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and completely unrelated to the iPhone. You should probably post your question in the iPhone forums:
http://discussions.apple.com/category.jspa?categoryID=201
Similar Messages
-
I am unable to connect to icloud from my windows-based laptop and get the following error message: "icloud encountered an error while trying to connect to the server."
I would remove the email account from mail and then set it up again.
If your are able to long I via owa though without the auto fill, then we already know the user name and password are correct.
Let me know if that works. -
I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........
This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.
-
On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?
Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin -
Here's the sequence of events:
Setting up a new iMac.
Migration Assistant was aborted during setup and a normal setup was completed.
Then ran Migration Assistant from the newly setup account.
It ran fine, but put all the data in a new account called "user".
Renamed "user" to a new name, renamed the home folder to a new name following these instructions: OS X: How to change your account name or home directory name
Delete the account we originally created, so just have one account with the name we want and all the data, email. Works fine.
Sign into the App Store with the account we share for purchases.
Now, the problem:
Go to System Preferences to setup iCloud with a new Apple ID
Get this error: "iCloud encountered an error while trying to connect to the server."
So I'm unable to setup iCloud for photo stream, FaceTime, etc.
Internet works fine, we can get mail, etc.
Rebooting doesn't help
Ideas?never mind the problem is gone this morning.
-
Error occured while trying to restore this iphone (-50)
I was trying to update my iphone 3G software to 4.2.1 (I was running 3. something before then) and I got a message that said "an error occured while trying to restore this iphone (-50)," and my phone has been wiped clean. This happened after updating my itunes to the latest update. In itunes, I now have two options, Set up as a new iphone, or restore from "unkown." Not cool! Any suggestions?
This did not solve the issue for me. I am trying to update to 4.0.1
My hosts file says
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
I also tried it with the second to last line completely removed, so it was
# 127.0.0.1 localhost
# ::1 localhost
Any other thoughts? -
Please help with below error...
I have been trying to access my icloud account in laptop with windows 7 operating, but I couldn't able to log in to icloud which show following error " icloud encountered an error while trying to connect to the server".
I have icloud icloud control panel.
But I can access my same icloud account in another laptop with windows xp operating.My recommendation is to download Apple’s Safari version 5.1.7 for Windows to access iCloud.com. It consistently works for me!!!! To make things easier with Safari, I made iCloud.com its Homepage. I’m using it to access iCloud.com from all of my PCs.
On my Windows 7 systems it appears that some add-ons are causing problems when you try to access iCloud.com with the 32-bit version of IE9, but the 64-bit version seems to work fine, more than likely because there are few add-ons that are 64-bit and the 64-bit version of IE9 can't be the default browser in Windows 7. -
I want to access my Icloud account through my office computer but every time I get a message saying ''iCloud encountered an error while trying to connect to the server''
My recommendation is to download Apple’s Safari version 5.1.7 for Windows to access iCloud.com. It consistently works for me!!!! To make things easier with Safari, I made iCloud.com its Homepage. I’m using it to access iCloud.com from all of my PCs.
On my Windows 7 systems it appears that some add-ons are causing problems when you try to access iCloud.com with the 32-bit version of IE9, but the 64-bit version seems to work fine, more than likely because there are few add-ons that are 64-bit and the 64-bit version of IE9 can't be the default browser in Windows 7. -
When trying to sign in to iCloud, I always get the message, iCloud has encountered a error while trying to connect to the server. How do I get in????
Hello,
Try following step and check if issue gets resolved or not.
Find Acrobat.exe on your computer. Right click the program and click 'Troubleshoot Compatibility'. Set the compatibility to Windows XP service pack 3.
Regards,
Anoop -
An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.
Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS) -
CALL_FUNCTION_OPEN_ERROR in CRM while trying to connect to ECC system
Hi All,
We are having issues while connecting to ECC system from CRM at specific point of time.
It occurred only once yesterday . Since it is a production system, we need to investigate the cause of the issue.
Upon checking the logs, I can see dumps in ST22 stating CALL_FUNCTION_OPEN_ERROR while trying to connect to ECC.
This issue has been faced by multiple users at the same time.
Both CRM and ECC are in the same server . There are no errors in ECC system ,
The error description says
Error opening RFC connection
Error text........... "Group USER not found"
Description.......... "LgIGroupX"
The response time is fine for the system and during the time when the error occurred.
Both the systems are in kernel 720 patch level 416.
There are no errors in dev_rd and dev_ms as well.
The errors in trace file also give information that ECC system cannot be reached.
However our ECC system was available , up and running and there were no issues at that time with ECC.
I have attached the dump, kernel and patch level details , work process trace files and the response times.
Please suggest.
Thanks,
Sowmya.LB: Hostname or service of the message server unknown#DEST =PUCCLNT220#MSHOST
=puc.apps.eon.com#R3NAME =PUC#GROUP =USER"
disp+work information
kernel release 720
kernel make variant 720_EXT_REL
compiled on Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116 for linuxx86_64
compiled for 64 BIT
compilation mode UNICODE
compile time Feb 16 2013 02:50:12
update level 0
patch number 416
source id 0.416
Error from work process trace file
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
M
M Mon Apr 20 15:48:09 2015
M ThPlgTimeout: ThPlgTimeout for plugin T144/U17974
A
A Mon Apr 20 15:58:59 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
A
A Mon Apr 20 15:59:02 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1 -
I get a message that my network connection has timed out while trying to update my iPhone on iTunes. Has anyone else had that problem and if so what solutions have you found? I was told to turn off my firewall and/or virus protection while updating but am nervous about doing that for obvious reasons. I'm also disgusted with Apple not providing free tech support.
See this article about the ports that have to be open during the update process. iTunes has to contact Apple during the download. iTunes for Windows: Troubleshooting security software issues
-
Error While Trying to Connect Weblogic
im gettting an error while trying to connect server on jdeveloper 11.1.1.1.5
The server is on LAN and installed on other PC I can also access the console and login correctly to console. After doing application server connection and testing the connection it gives me following error
Testing JSR-160 Runtime ... failed.
Cannot establish connection.
Testing JSR-160 DomainRuntime ... skipped.
Testing JSR-88 ... skipped.
Testing JSR-88-LOCAL ... skipped.
Testing JNDI ... skipped.
Testing JSR-160 Edit ... skipped.
Testing HTTP ... success.
Testing Server MBeans Model ... skipped.
Testing HTTP Authentication ... success.
2 of 9 tests successful.
any solution do u have
regards
Edited by: user5386925 on 22.Haz.2011 01:49Disable proxy settings in JDeveloper (Tools -->Preferences --> Web Browser and Proxy).
Then, re-start JDeveloper IDE and re-test your application server Connection,it should work fine. -
_OBJC_IVAR_$_ Referenced From Error while trying to deploy in iphone
Hi All,
I am facing one problem. any one who are aware of this project please help me.
My problem is:
i have Mac OS of 10.5.8 and xcode of 3.1.4
while i am trying to implement a application of audio files i want the frame work called "AVFoundation.Framework" i didn't found that frame work in my library.
so i added that framework from "MACOS10.4" .
but in simulator 3.1 it works fine. while trying to deploy in my iphone i am getting error like:
"-(avTouchcontroller updatecurrenttime)", referenced from:
_OBJC_IVAR_$_ avTouchcontroller._ivlmeter_in in avTouchController.oWhy don't you post here (again) and you might get some answers:
http://discussions.apple.com/message.jspa?messageID=10512489#10512489 -
I've been getting an error most of the day that says "iCloud encountered an error while trying to connect to the server" on my pc. Also, anything I update on either iPad or iPhone does not update on the other device. What's up?
Hello pongo19,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Set the Apple Mobile Device Service Startup type to Automatic
Remove and reinstall iTunes and AMDS
Best of luck,
Mario
Maybe you are looking for
-
I have two iPhone 5s. On one of them the Mail App works perfectly with Verizon.net with no issues. On the other hand, the other iPhone 5 has had continual issues with email using Verizon.net. Big time data useage (even on Wifi) and inability to re
-
my icon itunes wont open so i removed it and downloaded it 3 times and it still wont open
-
Error while modifying HR infotype PA0105 using HR_INFOTYPE_OPERATION
Hello All, I am not able to modifying the infotype PA0105. Currently I am using the FM HR_INFOTYPE_OPERATION. But I am not able to modify the record. Has anyone faced any such situation... Please help..!! Useful pointers will be appreciated... Thanks
-
Problem sorting list with virtual layout = false (and also with true)
Hi, I've a problem sorting a list... or better... I've a problem showing the sorted list ;-) I've a list of xml item. The list is shown with an item renderer. my needs: a button to refresh data and a button to sort data. useVirtualLayout = false -> r
-
Greetings all I'm in desperate need of assistance here. I've got an EP6 installation running on WAS 6.40. The install worked fine, it's been running for some time now without a problem. Now however, the J2ee won't restart. The JControl.exe just sits