Windows XP mode locked

Recently I installed Windows XP Mode and Virtual PC on my computer. While editing some photos using Adobe Pse 5 in XP Mode, the system crashed. When I tried to reopen XP Mode the screen displayed "The computer is in use and has been locked. Only an
XP User or an administrator can unlock the computer." How do I perform an unlock operation. I have tried rebooting my machine but with no success. Please help.
JohnF

I tried this technique without success. I was able to delete the file but as soon as I attempted to restart XP Mode, the file reappeared (I could watch it reappear in the directory) and a password was again demanded. Fortunately, this computer has had few
passwords and I successfully guessed what it was. Nonetheless, removing this file does not work in this case.
The computer is a refurbished HP/Compaq 6005 purchased from TigerDirect a few days ago and running a supposedly authentic (and it does verify correctly) copy of Windows 7 Pro.
I set up the XP Mode yesterday without a password and it ran fine. My next step was to transfer over all data files from the previous Win XP machine (an older HP/Compaq) using
Windows Easy Transfer. Might the password have "infected" XP Mode from something transferred in from the old computer? That's the only change to the system between installing XP Mode (and running it successfully) and today.
I suppose it is also possible that the XP Mode installation asked for a password, I created one, and immediately forgot about it. Usually I'm good about writing stuff down, maybe I goofed.
Jeremy
PS: the path to the file is now
C:\users\<USERNAME>\appdata\Local\\microsoft\Windows Virtual PC\Virtual Machines.
I suppose there have been changes in the OS since this was first posted.

Similar Messages

How to launch a single URL in a locked windowed-kiosk mode?

We need to launch a specific URL in Firefox in a windowed-kiosk mode.
If this can be done via a command-line that would be great. The Company want to restrict the use of the browser to this one specific URL and only allow close controls on the opened app window.
Is this possible?
Any help much appreciated!

See:
*https://developer.mozilla.org/Command_Line_Options
*FF Fullscreen: https://addons.mozilla.org/firefox/addon/FF_Fullscreen/
See also:
*http://mike.kaply.com/category/mozilla/
*http://mike.kaply.com/2014/01/08/can-firefox-do-this/
*CCK2 Wizard: https://addons.mozilla.org/firefox/addon/cck2wizard/

Monitor enters suddenly power save mode locks up machine

monitor enters suddenly power save mode locks up machine
I have all power saving settings at never in windows
I had 4x in 9 months bizarre crash suddenly my monitor turned black then went into energy saving mode then I was unable to reset using button I had to shut down by turning off power supply
HELP
amd quad core 980 msi 890fx-gd65 corsair twinx ddr 1333 2x2 gb
seasonic s series 520w psu
swiftech polaris129 powercolor 6790
coolermaster storm enforcer 2x 200mm
dell Dell UltraSharp U2212HM

Well, a few things could cause such a problem and it could be a true pain in the butt to narrow down.
How old is the computer? 9months
When this happens, is it when you are playing a game or other high load process?first times on web last 2 idle
If so are you keeping track of temperatures via core temp or some other program?using speccy and bios
Anything in the event log? nothing unfortunately
Any Graphical distortion other than the screen turning black or do you ever see a window popping up telling you a driver re-set was required. some window screen almost overlay in photshop 7 intermittent
Have you run memtest to check the memory? some portable apps and benchmarking apps
If its not a new comp, have you cleaned the comp recently and verifed all the fans are working.
Have you done an error check on the HDD? fans are ok
running win xp sp3

Firefox freezes trying to download or save files, Import/Export bookmarks, clicking (Tools) Options (was: Fire Fox crashes in Windows safe mode and in Firefox Safe mode)

Hi
XP sp3 4gb ram
Firefox 6.0.2
Firefox crashes every time I do any of the following. Then I have to force quit Fire fox.
If i click a download link on a web page, Firefox freezes the instant I click the link
...but Firefox does not freeze if I click a web link on a web page or page navigation link.
If i go to the Menu bar > Tools > Options, Firefox freezes the instant I select Options from the Tools menu.
...but Firefox does not freeze if select any other item from the Tools menu.
If I go to the Menu bar > File, Firefox instantly freezes the instant I select either "Save Page as..." or "Open file..."
...but Firefox does not freeze if I select any other option from the File menu such as: New Tab, New Window, Send Link, page Setup, Print, Exit etc
If I go the Menu Bar > Bookmarks > Show all Bookmarks > Import and Backup, Firefox instantly freezes the second I select "Import" or "Export"
... but Firefox does not freeze if I select any other command in the Bookmarks sub menus, nor does it freeze if I back out of the menu entirely.
Same as above for History if I select "Import" or "Export"
...so I have isolated the problem to a limited number of commands in Firefox that cause Firefox to freeze... described above. Everything else in Firefox works fine.
HERE IS A SUMMARY OF WHAT CAUSES THE FREEZING:
• Clicking a download link on a webpage
• Going to the Menu Bar > File and selecting "save as" or "Open File"
• Going to the Menu bar > Tools and selecting Options.
• Going to Bookmarks > Show all Bookmarks > Import and Backup and selecting either "Import" or "Export"
• Same as above for History if I select "Import" or "Export"
Everything else in Firefox works fine. I went through every menu command and checked for freezes. Only the commands I mentioned above cause the freezing.
I tried the following to try to fix it:
• Reset my modem and router (Problem still exists)
• Uninstalled FF. Deleted folders, profiles (Downloads.sqlite), Registry entries. Reinstalled. (Problem still exists)
• Restarted FF in Firefox safe mode. (Problem still exists)
• Restarted in Windows Safe mode and then started FF in Firefox safe mode (Problem still exists)
• Disabled Window firewall. Disabled ZoneAlarm firewall, Shutdown ZoneAlarm firewall. Set Internel Options to default settings. (Problem still exists)
• I reset the config option: browser.download.manager.scanWhenDone to false
What does work?
• Firefox does not crash when I click a link an go a website, navigate a page, use a menu item command.
• Firefox works fine on my other computer.
• Internet Explorer works fine on the computer that Firefox is having a problem on.
• My other applications work fine on the computer that Firefox is having a problem on.
I want to add that, I just overcame the XP Recovery Virus by following a post that suggested running the following software to fix the virus. Everything seems back to normal except Firefox.
The software I ran to fix the problem are listed below:
• malwarebytes
• superantispyware
• ccleaner
• combofix.
• smart defrag
• then load a good anti-virus. (I ran Zone Alarm virus scan)

Hi.
This is about a question you posted to the Firefox Support forum three months ago (I'm sorry you never got an answer).
Did you ever fix the problem where Firefox freezes or hangs, when clicking a download link or using (File menu) "save as" or "open file"? Or when going to the Firefox (Tools) menu and clicking Options ? Or trying to Import or Export bookmarks?
I found this thread searching for a solution for someone on MozillaZine's support forum who's having a similar issue. See this thread: (maybe something he's tried that didn't work for him will work for you?)
http://forums.mozillazine.org/viewtopic.php?f=38&t=2382953&start=15
<br>Cannot download or click tools -> options

Can't attach USB devices in Windows XP Mode

I am still trying to set up my new Probook G1 450. It is presently in the original Win 7 Pro 64-bit OS.
I am trying to use Windows XP Mode. I can set up XP Mode, but I can't get USB access under it. But for me, the whole point of getting XP Mode is to be able to run two key programs which require USB access. The USB devices have been successfully installed in Win 7 (it's the programs that require XP Mode).
I have tried with VMLiteXPMode, Virtual Box, and finally with Windows Virtual PC. The results are about the same. I am presently trying Windox Virtual PC. When I access the USB button on the top of the XP Mode box, there is a list of all the USB devices. This looks like things are fine. All the devices are there. Hooray. Oops, too soon! It still doesn't work. One still has to "attach" the USB device, by clicking its listing under USB devices. When I do this, I get the following error message:
"Could not attach the USB device. You can attach the USB to a different USB port or restart the virtual machine and try again."
Yes, I can and have done all those things, and I get the same error message again and again and again. This is true for all USB devices (except the USB mouse, which works perfectly and automatically in XP mode and is *not* listed under USB):
* Epson Perfection scanner
* HP Laserject printer
* the computer's own HP HD Webcam,
and
* the computer's own Wireless/Bluetooth Device
For example, the scanner and printer will work well in the host machine, where I have installed them, but they can't be "attached" in XP Mode.
Notes:
* I have enabled "integration features"
* I have tried disconnecting and reconnecting the devices.
* If I try to install the printer in XP Mode, I can't do that, because this requires, at some point, the printer being plugged in to the USB. And I get the above error message when I try to attach it.
Also I have already had to deal with one driver issue (it came with the wrong driver for wireless; the right driver wasn't on the HP support page and couldn't be obtained by the computer's own "update' function), but when I finally discovered the right driver, wireless worked flawlessly
There is yet another possible driver issue, but I'll leave that for another topic later. One thing at a time.

@comvox
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Firefox has stopped working in Windows 7 but works in Windows safe mode

I am sending this from a different computer on which Firefox works fine. My problem is on a Windows 7 PC -- in the past few days Firefox has stopped working in normal mode but works ok in Windows safe mode. I keep getting a Windows error message that it has stopped working and I will be notified if there is a solution. Of course, I am never notified. I have tried resetting Firefox when in Windows safe mode, as well as uninstalling and reinstalling Firefox, after having deleted all the program folders and appdate. I've exhausted every possible fix I could find in the Mozilla support forums but I still can's solve the problem. Can you help please?

*3
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

My HP Pavilion 775C with Windows XP 32 bit SP3 has begun to startup in Windows Recovery Mode.

I have had many problems with my Pavilion a775c desktop, running XP 32 Bit with SP3 and 2.5 G Ram. I was receiving a Fatal Error message 1327 that Drive M did not exist. I did a selective startup eliminating the programs I thought were causing this but that did not help. Then I cleaned away all the files for any HP printer, and for my current printer, an Officejet j3680 All-in-One, and then reinstalled it. That took care of the fatal error message but I began to get a message that my DRive D was out of memory. I deleted some regular files that were previously stored on that drive before I increased the memory on my Drive C but I continued to receive that message. I cleaned the registry with Registry Mechanic and then deleted files I though would not harm the computer and I no longer get the Drive D low on memory message but now the computer starts up each time in recovery mode and If I'm not there to select the Windows XP option it goes to a dos screen but nothing ever happens from there. I'm not that familiar with DOS and don't know anything except to type EXIT which I did and the computer would reboot giving my an opportunity to select Windows XP. Now, however, it won't allow me to type EXIT. I must instead hit enter and then it goes to the screen that allows me to select the Windows environment. I really don't want to have to do this each time I start up. Can anyone help?

I am not that familiar anymore with troubleshooting Windows XP, but way back in the day I seem to recall that the Windows recovery console would be used to fix issues like the one you're describing. It sounds like you may have a corrupted boot sector if it keeps going into the windows recovery mode. The solution could be as simple as using the last known good configuration or possibly doing a system restore. You may want to try this link on Technet that explains the recovery console and the tools available in it like fixmbr..
http://technet.microsoft.com/en-us/library/bb457126.aspx
Worst case you may be looking at doing a reinstall of windows XP.
I am an employee of HP

Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?

Hi,
I have been searching the web to find out the best way/place in which to load Captivate 4 on my Windows 7 64-bit machine. Seems some people have issues with recording, others don't. I have Windows XP mode on my machine.
My question is... what's the best way to load Captivate 4 on Windows 7 - should I install to Windows 7 and see how it goes. Or should I install under Windows XP mode?
Thank you!
Michele

Yea it works in XP mode
Daniel Wooden
Systems
U.S. District Court Middle District of Tennessee
615-736-7485
From:   RodWard <[email protected]>
To:     DEW45 <[email protected]>
Date:   09/24/2011 12:01 AM
Subject:        Install Captivate 4 on Windows 7 64-bit
machine with Windows XP mode?
Re: Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?
created by RodWard in Adobe Captivate - View the full discussion
Try running Cp4 in WinXp compatibility mode on Win7. Also make sure
you're set to Run as Administrator.
I run Cp4 on Win7 without issues. But other users report similar problems
to yourself. In the end, it may or may not work for you because Adobe has
never claimed Cp4 was compatible with Vista or Win7 64bit.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3935593#3935593]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3935593#3935593]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Windows 8.1 lock screen

Hi there,
I would like to ask about lock screen. Normally, when I turn the screen off using function key, it will lock the screen and when I press any key, windows will ask for authentication. But after receive some updates, I cannot not do this anymore. The screen
will turn on and go directly into the screen without asking any passwords so I would like to ask how to lock the screen automatically when I turn the screen off.
Thank you for your help

Hi,
In alternative way, we can try following steps:
Windows key + L (lock screen)
Set the lock screen timeout to turn off display:
How to Change Lock Screen Display Off Timeout Period in Windows 8 and 8.1
http://www.eightforums.com/tutorials/8268-lock-screen-timeout-period-change-windows-8-a.html
Kate Li
TechNet Community Support

64-bit Windows 7 Pro's Windows XP Mode, Palm Desktop 4.1.4 sync with Palm Vx?

I last talked about Palm Desktop compatibility with 64-bit Windows at http://forums.palm.com/palm/board/message?board.id=software&message.id=37767. Fortunately, I haven't replaced my laptop yet, so I am in the enviable(?) position of planning the acquisition of a spanking new machine with 64-bit Windows 7 Pro (sidenote: likely a 14" ASUS). However, my PDA is still Palm Vx, which requires Palm 4.1.4, which requires 32-bits, which is provided in Windows 7 Pro by its Windows XP Mode. Has anyone heard any word of whether XP mode allows seamless sync'ing through the serial or IR ports? Serial is most preferrable, of course, due its speed, lack of headaches with line-of-sight alignment, and the fact that it needs to be docked anyway for recharging.
I'm not sure if it's as dependent on the Palm Desktop version as much as it depends on the Hotsynch Manager, which is 4.1.0. There are probably certain Hotsynch Manager versions that are compatible with Palm Desktop 4.1.4 and Palm Vx.
Post relates to: Palm Vx

I last talked about Palm Desktop compatibility with 64-bit Windows at http://forums.palm.com/palm/board/message?board.id=software&message.id=37767. Fortunately, I haven't replaced my laptop yet, so I am in the enviable(?) position of planning the acquisition of a spanking new machine with 64-bit Windows 7 Pro (sidenote: likely a 14" ASUS). However, my PDA is still Palm Vx, which requires Palm 4.1.4, which requires 32-bits, which is provided in Windows 7 Pro by its Windows XP Mode. Has anyone heard any word of whether XP mode allows seamless sync'ing through the serial or IR ports? Serial is most preferrable, of course, due its speed, lack of headaches with line-of-sight alignment, and the fact that it needs to be docked anyway for recharging.
I'm not sure if it's as dependent on the Palm Desktop version as much as it depends on the Hotsynch Manager, which is 4.1.0. There are probably certain Hotsynch Manager versions that are compatible with Palm Desktop 4.1.4 and Palm Vx.
Post relates to: Palm Vx

Windows 8: Bit Locker encrypted drive "Access Denied" external drive

I rebuilt my computer and installed win 8.1 pro. Now my external drive comes up as an empty drive with "Access denied". Here is the kicker: I had turned off bitlocker on the external drive long ago as it interfered with automated backups.
Running the commands suggested here:
https://social.technet.microsoft.com/Forums/windows/en-US/738c1760-c96d-430f-9ae6-1f28f5c60998/windows-8-bit-locker-encrypted-drive-not-found-or-access-denied?forum=w8itprosecurity it shows the bitlocker but as unlocked. Drive still shows empty.
Any suggestions?
Thanks,
Markus

Ahh, turns out to be permission issue not bitlocker (or maybe bitlocker caused it to lose permissions, don't know).
Opened MyPc, right click on drive ->properties->security->advanced and selected apply to all.
Markus

In XP Mode on Windows 7, after installing application as like I would normally on an actual XP system, application will not start in windows XP mode itself.

Just did a clean install of windows 7. I then downloaded windows XP mode and Windows Virtual Mode. Everything ran flawlessly and everything is updated. I needed to Install a program called Dentrix 10.5 which can only be installed on Windows
XP for numerous reasons and one including it needing to use Microsoft .NET 1.0. I installed this program on Windows XP Mode as I would as if I were installing it with a computer with windows XP. The Install of the program went fine and completed.
Still being in Windows XP Mode I wanted to see how it would run. I hit Start Menu, All Programs, Startup Programs, and clicked on the Dentrix Application. Once I clicked it the time glass on the mouse was there for a few seconds and
then went away without the application starting up at all. One thing that I'm thinking is why after I clicked Start Menu, All programs, is why was Dentrix not in its own folder and instead in the Startup programs after All programs? Any Ideas how
to get the program to run? Like I said, I am trying to run the program in Windows XP Mode and not Windows 7 as I have found many Q's and A's on only how to do that. Also this is the second application which I downloaded and the first being Microsoft
Security Essentials so I know I don't have some virus from keeping from opening the Dentrix Application. Incase you are wondering the Microsoft Security Essentials opens and runs fine in Windows XP Mode. So Pretty Much My Main question is: Why
my application not starting up in Windows XP Mode? Any help is greatly appreciated!

Once I clicked it the time glass on the mouse was there for a few seconds and then went away without the application starting up at all.
A couple times a week I open Dentrix 11.0 in a virtual machine on Windows 7. I experience the same thing almost every time I open the VM. I must first get Windows to "reconnect" my network for me. Do this by opening Start | My Computer, and
double-click on the mapped network drive leading to the Dentrix data. After I can see the Dentrix data drive, Dentrix will be able to read it too and will open correctly.
In Dentrix, seeing nothing (or briefly seeing a hourglass and then seeing nothing) is a classic sign that either:
- The database files are marked as Read Only
- The program cannot access the data files (probably the folder it is pointed to does not contain any data).
- Or possibly the database path does not point to the right location where the data files are located
Open the folder where you installed the program files of Dentrix (probably c:\program files\dentrix\) and double-click to run EP.EXE. The database path will be revealed. You can "Browse" to the correct location, and "OK" through the dialog to
close them. Then try opening Dentrix again.
Should that not work, open Start | My Computer, and try to open the path (starting with the drive letter, then the folder structure you saw in EP.EXE).
By the way, if your path uses UNC (starting with two back-slashes and then the computer name of the server), you'll need to map a network drive and replace your path with a mapped drive path. (Map a drive in Start | My Computer | Tools | Map Network
Drive). Dentrix really doesn't like UNC paths.
Dentrix 10.5 can only be installed on Windows XP
Microsoft .NET 1.0
Just FYI, Microsoft .Net Framework 1.0 is required only for the "Time Clock" feature of Dentrix. Windows 7 already has .NET Framework features up to version 3.5 built in, and Time Clock (in my experience) works great under Windows 7 without installing
.NET 1.0.
Have you tried installing directly in Windows 7? I have a specific reason why I don't (I have a newer version of Dentrix installed on my Win 7 machine, and use the VM to go back to an older database occasionally - so I can't mix two different program versions
on the same machine). If you were to try installing this program under Windows 7 directly, Dentrix will launch the Microsoft .NET Framework install after the Dentrix install is completed. Just cancel out at that point (Windows will probably give you an "incompatibility"
error message anyway before allowing the install to go through) and I believe you can run it under Windows 7. That might eliminate the networking-through-the-VM issue. So, if you have no other reason not to install Dentrix on your Windows 7 machine directly,
I'd try it. You might be surprised and if it works, you'd save yourself some headache with connecting the to network through the virual machine.
Is why was Dentrix not in its own folder and instead in the Startup programs after All programs?
During the installation, on the Select Program Folder screen, you must have clicked the "Startup" option under Existing Folders. By default, "Dentrix" will be typed into the box at the top. If you simply clicked Next, it would have gone
to the correct location. The screen is a little confusing, because something in the list will be highlighted by default, but what is typed into the box at the top will actually be used.

LPTI redirect in Virtual WIndows XP mode using WIndows 7 Pro

I have an application that only prints to LPT1. The application only can run on XP so I installed it on Virtual Windows XP mode. The application works ok but I cannot print. The printer I have is a USB printer that is installed on Windows 7 Pro and I am
able to share that printer in XP mode. In the past when the application was installed on a dedicated XP Pro operating system, I was able to get the application to print to my USB printer by using the NET USE LPT1 command.
My problem now is how to I get the application installed on Virtual Windows XP mode to be directed to the shared USB printer on Windows 7 Pro when it is looking for LPT1
Your help is greatly appreciated.

Hi,
XP Mode does not have access to parallel ports so the DOS command to use LPT1 within XP Mode will fail, have you checked this link?
http://superuser.com/questions/182655/how-do-i-simulate-a-parallel-lpt-printer-with-a-usb-printer
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Windows XP Mode will not run

I have installed Windows Virtual PC and Windows XP mode following the steps outlined on the Microsoft website.
I enabled hardware virtualization in the BIOS, as requested, and then ran the hardware virtualization detect tool, and this indicated that hardware virtualization was working ok.
When I try to run Windows XP Mode, I get the following error message:
"Cannot start Windows Virtual PC Host Process. Check the system event log for more details
Server execution failed"
The Event Viewer shows the following Errors for Virtual PC:
"One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again."
and
"Virtual machine Error - Server execution failed (0x80080005)"
I have reinstalled Virtual PC, and I get the same errors.
I looked at Device Manager, and Virtual PC Host Bus Driver has an exlamation mark, indicating there is a problem. The driver properties reports:
"Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)"
If I try to update the driver software, it reports that the best driver software is already installed.
I get this same device driver error after uninstalling everything, and then re-installing in the order stipulated on the Microsoft website.
I need to be able to run a Windows XP virtual machine, so please can someone help with this.
Details of my PC are as follows:
Operating System: Windows 7 Professional 64 bit.
Processor: Intel(R) Xeon(R) CPU E3-1240 V2 @ 3.40GHz 3.40 GHz
Installed memory (RAM): 32.0 GB
Motherboard: Asus P8CWS

This thread is a discussion of a few things that can cause that, hopefully one of the fixes will help you.
http://social.technet.microsoft.com/Forums/en-US/5be5c8e0-bb3e-4c6b-98a1-b44b7eb5e83a/windows-virtual-machine-doesnt-start
Bob Comer Microsoft MVP -- Hyper-V

Windows XP mode/ Windows virtual PC

I have to support some LV7.1 programs (along with newer versions). I just bought a new laptop with Windows 7 Home 64-bit. LV7.1 loads and runs, but the drivers disk pukes on the 64-bit OS. (This was not unexpected...)
The new PC does have an Intel processor that will support Windows Virtual PC and Windows XP mode.
I will need to upgrade to W7 Pro, but before I do, I'd like to get some feeling that it will all work. Should older NIDaq, MAX, etc. install OK in XP mode?  Has anybody done this? Is there another solution that is better?
Solved!
Go to Solution.

Seth,
Thanks for the speedy reply.
I try to use NI-DAQmx, but I won't swear that I don't have traditional DAQ routines out there. I would like to run real hardware (USB DAQ) on my new laptop, de-bug and burn executables.
What are my options? I could keep LV7.1 on my old desktop, newer versions on my new laptop. Would I be running afowl of LV's EULA? Does NI care about antique versions of LV?
I see that NI-DAQmx 9.0 supports versions LV8.2.1, 8.5.1 and 8.6.1.  If I put these on my 64-bit, will executables I make run on 32-bit target systems?
I don't want to flush Windows 7 64-bit to install the 32-bit. I want it all!
My company has let my subscription lapse. I don't have LV 2009. Not much chance of an upgrade this year...
Regards,
John Spencer

Windows XP mode locked

Similar Messages

Maybe you are looking for