Windows XP Mode, Unidentified device fails to attach
Would you please assist me with the following:
I wish to use a CDR 2000 USB x-ray sensor in Windows XP Mode under Windows 7 Pro 64.
There are no drivers available for Windows 7, there are drivers available Windows XP. The sensor works correctly on a Windows XP PC we wish to phase out.
In windows xp mode the usb sensor appears as "Unidentified Device" in the USB pull-down. It shows "attach" to the right. When I select it it reports the error:
Windows XP Mode - Windows Virtual PC
Could not attach the USB device. You can attach the USB device to a different USB port or restart the virtual machine and try again.
I've tried both without success. My system has USB 3.0 and 2.0 ports. I've tried it on both. Device Manager in Windows 7 shows the device when plugged in, though it is as "Unknown device". It never appears in the Windows
XP Mode device manager.
Thanks for your help!
Hi,
The drivers for this device might not work in Host, please first check in Device Manager to see if the device could be detected, make sure the BIOS is configured to use USB 2, then redirect the device and install the driver from within Windows XP.
Best regards
Michael Shao
TechNet Community Support
Similar Messages
-
Despues de la ultima actualizacion de iTunes, sale el siguiente mensaje "the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem". Al dar clic en OK sale oro mensaje:"Itunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126). Cuando trato de reinstalar vuelve a mostrar un error:"Service apple mobile device failed to start. verify that you have sufficient priviliges to start system services".Alguien puede orientarme por favor?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Help MTP usb device failed N97
When connected N97 via cable to pc ( windows 7 ) " MTP usb device failed" and cant see N97 in Pc suite. In mass storage mode work fine.
Please HELP.Download ovi suite for n97 and your issue will be resolved.
When u connect ur n97 for the first time after installation make sure to press install on whatever the phone is being prompted to install. Oh and one more thing .. make sure you restart your phone and your pc before doing all this
Message Edited by agha_ali on 31-Jan-2010 11:11 AM -
Can't attach USB devices in Windows XP Mode
I am still trying to set up my new Probook G1 450. It is presently in the original Win 7 Pro 64-bit OS.
I am trying to use Windows XP Mode. I can set up XP Mode, but I can't get USB access under it. But for me, the whole point of getting XP Mode is to be able to run two key programs which require USB access. The USB devices have been successfully installed in Win 7 (it's the programs that require XP Mode).
I have tried with VMLiteXPMode, Virtual Box, and finally with Windows Virtual PC. The results are about the same. I am presently trying Windox Virtual PC. When I access the USB button on the top of the XP Mode box, there is a list of all the USB devices. This looks like things are fine. All the devices are there. Hooray. Oops, too soon! It still doesn't work. One still has to "attach" the USB device, by clicking its listing under USB devices. When I do this, I get the following error message:
"Could not attach the USB device. You can attach the USB to a different USB port or restart the virtual machine and try again."
Yes, I can and have done all those things, and I get the same error message again and again and again. This is true for all USB devices (except the USB mouse, which works perfectly and automatically in XP mode and is *not* listed under USB):
* Epson Perfection scanner
* HP Laserject printer
* the computer's own HP HD Webcam,
and
* the computer's own Wireless/Bluetooth Device
For example, the scanner and printer will work well in the host machine, where I have installed them, but they can't be "attached" in XP Mode.
Notes:
* I have enabled "integration features"
* I have tried disconnecting and reconnecting the devices.
* If I try to install the printer in XP Mode, I can't do that, because this requires, at some point, the printer being plugged in to the USB. And I get the above error message when I try to attach it.
Also I have already had to deal with one driver issue (it came with the wrong driver for wireless; the right driver wasn't on the HP support page and couldn't be obtained by the computer's own "update' function), but when I finally discovered the right driver, wireless worked flawlessly
There is yet another possible driver issue, but I'll leave that for another topic later. One thing at a time.@comvox
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1
I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1. Can someone help?
This is NOT resolved. The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing. This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well. -
Unable to install iTunes 11.1.4.62 on windows 8. I get
Service "Apple mobile Device) failed to start.
Verify that you have sufficient privileges to start system services.
I am trying to install it on my desktop. I am also in Administrator mode. My iTunes stopped working when I was notified that there was a new version of iTunes and would I like to download it. I said yes as always and it was unable to finish the update because of a
runtime Error!
Program: C:\program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contace the application's suport team for more information.
My iTunes stopped working at this time. I thought I could delete iTunes and start over. This tactic did not work.
Can anyone make sense of what I am saying and help me to get my iTunes back again?Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
I was getting an update and it would not load so I tried to uninstall and reinstall. Now when it reinstalls it gets to the end and it comes up with the following error message.
Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
This is on my desktop that I have had for a number of years that has had itunes for a number of years. I have an two ipods and an ipad associated with the itunes account. Now I can not get it to go past this message.Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I'm getting a n error message when I try to open Itunes. Itunes was not install correctly. Please reinstall itunes. Error 7 (Windows error 1114) This happened after I unsuccesfully tried to install an update. I have had itunes on this computer for three years. When I try to reinstall the latest version I get another message.Service Apple Mobile Device (Apple mobile Device) failed to start. verify that you have sufficient privileges to start system services. Abort, Retry, Ignore Does anyone know how to solve this problem?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
OK, spent about 25 frustrating hours so far this weekend doing everything recommended on numerous threads here -- uninstalling and reinstalling itunes and all Apple items. Help?
I am using Windows Vista home premium. After the last iTunes update to 12, it suddenly would not work. I followed, to a T, all instructions to uninstall all Apples software, in the correct order, reboot, download the latest iTunes, run as administrator, plug in the iPhone 5S, let the driver install, and then finish.
Along the way, I received the error that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I am the administrator and have privileges. (I previously followed instructions from anther thread to change the read-only privileges for Apple folders, but to no avail. I also deleted every file with the word Apple in it after I uninstalled everything.) I did a retry and then an ignore during installation of the AMD error, which I have received 10 times.
The other error I keep getting is: "iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7." I have done that 20 times.
Other frequent error: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)."
I followed other threads suggestions to install Windows .NET versions 3.5 and 4.0. No help. I also looked for various specific Apple files in various folders for DLLs, etc. Not present. I have rebooted 50 times and tried different users on my home account as well. Nothing.
I also followed instructions to Manage my computer under "services." Under Apple Mobile Device, the setting is for "automatic." When I try to get it to "start," the error I receive is "Windows could not start the Apple Mobile Device on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." (I followed previous thread instructions to use the CMD prompt to stop it. That caused problems because the status was then "stopped," but I was able to restart it later once I figured that out -- but with the 1053 error again.)
I think I've tried every suggestion in every thread for the four errors I keep getting (AMD failed to start; iTunesHelper Error 7; Windows error 998; and AMD Error 1053.) I am fresh out of ideas and very frustrated. I mostly want to make sure I don't lose my music and photos, which I was about to sync.
The only other thing I see that is strange on my computer (which I discovered along the way) is that I cannot receive automatic windows updates and have not had an update since 2012. My iTunes worked a month ago, so that was obviously not a show-stopper in the past, but perhaps there is a Vista update I need for iTunes 12? I have service pack 2 for Vista. I have followed all threads to try to set my windows to automatic update, but no joy there either. It checks for updates and then fails. I followed instructions and did run an installation to install windows automatic updates, but that doesn't work either. I tried 10 times. It runs and takes a while, but is never able to successfully update windows. It says "checking for updates" for a while. Then it dies. My last update was 6/19/12 (failed) and it says the most recent check was 6/22/12, but I have tried 20 times on 10/31/14 and 11/1/14.
When asked to "Install new Windows Update software" to check for updates, I have done so 10 times. It downloads and installs, but never works.
It's an old Dell desktop computer from 2006, and I'm using an iPhone 5S. I am fresh out of ideas. Anyone really smart here?
Thanks.
TristanUpon latest reboot, I also received this error message: "The application failed to initialize properly (0xc0000005). Click OK to terminate the application."
Then I got the iTunesHelper not installed correctly error again.
Then the "Windows can't check for updates" error message.
Then "Apple Push has stopped working." Then a quick DEP error message that disappeared but said something about Apple Push being closed.
I'm also getting denials of service logged by McAffee. Not sure if I'm getting a virus/attack or not.
Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
Thank you for your help!
Tristan -
Normal update of iTunes to 11.1.4 fails. Suggests installing from web site
I install from iTunes.com. Install issues the messages:
Service "Apple Mobile Device' failed to start.
Verify that you have sufficient privileges to start system services
I do have necessary privilegs. I hit ignore. See window with successful install come up and finish with launch. I get the messages:
iTunes was not installed correctly.
Please reinstall iTunes
Error 7 (Windows error 126)
Tring to start iTunes from desktop gives:
This application failed to start because MSVCR80.dll was not found
Re-installing the application may fix the problem.
Further repair or remove/reinstall does not fix the problem (including after reboot)
Thie is the first time this has happened. I'm not sure where to go from here
Thanks for any help.Earlier suggestion worked. That is, Use software add/remove to delete all 5 iTunes applications:
Apple Application Support
Apple Mobile Device Support
Aple Sortware Update
Bonjour
iTunes
Reboot and install/ -
When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have downloaded the latest Itunes update, but it will not install and I receive a message 'apple mobile device failed to start'. I have uninstalled and reinstalled itunes but still have the same problem!
Hi there willjay3976,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W. -
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
News files shared on Windows 8.1 PRO 64b PC are not visible by XP SP3 32bits
HEllo all, I am sharing a directory with subdirectories on a PC running Win 8.1 (workgroup type) . In subdirectories there are some videos files. I add regulary some files, but all my other PC running Win XP don't see the new files. (of course F5 doe
-
Error occurred during initialization of VM, could not reserve space in heap
I installed the SOA suite+ BPM 11.1.1.3.0, ESB 11.1.1.3.0 successfully along with RCU schema in oracle DB Ex edition 11 G successfully. I have 2 GB Ram in my system. I am facing the below error during the startup of weblogic instance which is having
-
PC suite export/import breaks SMS messages
Nokia PC suite 6.85.14.1 Windows XP SP2 Phone 6500 classic connected either by Bluetooth or USB just updated 6500c to 4.84 firmware an sms message is received and is viewable fine in Inbox using the phone I move it to Archive, it is still OK I then e
-
BOM material transfer from ECC 6.0 to GTS 10.0
We are trying to transfer BOM (Bill of Material) type materials through sales order from ECC to GTS system. However we need to classify in GTS system both parent iteam and child items else the sales order containing BOM material will remain in "block
-
Can't use editor (was 0185464975)
I can now open the Editor Section but cannot use it! When in Organiser and I select an image and click on Editor a window opens which says Searching for missing file-to locate file yourself click Browse. Then I am told No File Selected Have you remo