Windows XP not finding NTFS partition when connected to AEBS
Here is my setup:
I have the current AEBS with firmware 7.4.1 connected to a Windows XP w/SP3. I also have my Macbook Pro running wirelessly as well as another XP laptop. I have wireless connections, a bit slower than I had hoped as I get further away from the AE but its OK.
I also have an Acomdata Pure Drive 1tb connected to the AE. I partitioned the drive half HFS+ and half NTFS. I confirmed and re-confirmed that both partitions are OK by connecting them via USB to all of my machines.
When connected to AEBS, the hard drive appears as a shared device rather than as a hard disk on my Macbook pro, which was not what I expected but is ok. Only the HFS+ partition appears, which is as expected.
However, on both windows machines, the HFS+ partition is also the only one that appears, and the file structure under disk properties shows as FAT32! I've searched and have been unsuccessful in getting the XP machines to locate the NTFS partition. Can anyone help?
Mahalo,
Mike
Thanks again for the replies, and I have a follow up question. Apologies in advance since I am a noob with Macs.
I reformatted my USB drive with one HFS+ and one FAT32 partition. Works great on my Macbook (I formatted using Disk Utility), both partitions are visible as shared drives.
On one of my XP laptops, both partitions also appear, and I am able to copy files to both, even the HFS+ formatted partition. When I check formatting in My Computer, both partitions indicate FAT32. When I check formatting on my Mac, it indicates HFS+ and FAT32, respectively.
I expected that the Mac would be able to use both drives, but I expected that only the FAT32 drive would be write-accessible on the XP. So what did I mess up this time?
Mahalo,
Mike
Similar Messages
-
I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..
Hi LamboMong,
just try this:
http://refit.sourceforge.net
install, reboot twice and choose the Windows-Partition on next startup.
(The apple-bootloader doesn't display all bootable harddisks.
With rEFIt you can boot from all partitions/harddisks on your computer.)
I hope that will solve your problem.
Daniel Fernau -
Using WindowsXP, and e-mail via Yahoo,browser is Firefox 4.0.I get the following error message when accessing yahoo mail site:"http://us.f831.mail.yahoo.com/dc/launch?action=welcome&yy=1782408664&.rand=0qrsdp1o...Windows can not find(the above address is inserted here).make sure you typed the name correctly,and try again". After this message is displayed on my desktop it begins to fade,and the inbox of my yahoo mail is then displayed..I am able to work all functions of the mail without problems.( I might add at this point that i access the mail program via a desktop icon).When I close out of the program the error message box with the error described above is displayed again on my desktop.I must click on the "X" to remove it.I can access my yahoo mail via Internet Explorer with no problem,as well as accessing via my yahoo home page.
Here's an image of the ERROR Message. I'm not sure how this forum works -- if this image is an attachment or if it shows up in the body of this reply.
Here goes... -
After upgrading the itunes, I can not find my ipad when it connects to the PC
After upgrading the itunes, I can not find my ipad when it connects to the PC
Before that, I can see an botton said my ipad. And then I can click it to operate my ipadTry this
Go into the control panel. Add/remove programs. Uninstall iTunes, Apple mobile device service, apple application support. Then go out and redownload and reinstall iTunes and try again.
There seems to be a glitch with a recent update and one way to overcome it is to just start over. If that doesn't work there are more in depth things you can do. -
Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)
I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam -
Windows could not set a partition active on disk 0. error 0X80300024
I followed the "Step-by-Step: Basic Windows Deployment" Link: http://technet.microsoft.com/en-us/library/dd349348%28v=ws.10%29.aspx
after creating aotounattend.xml file, I went to step2: building reference installation. however, recieving the below error message:
"windows could not set a partition active on disk 0. The target disk, partition, or volume does not support the specified operation. The error occurred while applying the unattend asnwer file's <DiskConfiguration> setting. Error code: 0X80300024"
it happened in the beginning of installation.
what's more, before that error, system still asked me to choose which languange in the installation and I also need to click install button to begin installation.
I believe that with answer file, windows 7 should start installation automatically. Am I right?
Here is my answer file:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="specialize">
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>http://www.google.com</Home_Page>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Reseal>
<Mode>Audit</Mode>
</Reseal>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OOBE>
<HideEULAPage>true</HideEULAPage>
<ProtectYourPC>3</ProtectYourPC>
</OOBE>
</component>
</settings>
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-us</UILanguage>
</SetupUILanguage>
<InputLocale>en-us</InputLocale>
<SystemLocale>en-us</SystemLocale>
<UILanguage>en-us</UILanguage>
<UserLocale>en-us</UserLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Order>1</Order>
<Size>300</Size>
<Type>Primary</Type>
</CreatePartition>
<CreatePartition wcm:action="add">
<Extend>true</Extend>
<Order>2</Order>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Order>1</Order>
<PartitionID>1</PartitionID>
</ModifyPartition>
<ModifyPartition wcm:action="add">
<Format>NTFS</Format>
<Label>Windows</Label>
<Order>2</Order>
<PartitionID>2</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
<WillShowUI>OnError</WillShowUI>
</DiskConfiguration>
<ImageInstall>
<OSImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallToAvailablePartition>false</InstallToAvailablePartition>
<WillShowUI>OnError</WillShowUI>
</OSImage>
</ImageInstall>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/users/dyang3/desktop/install.wim#Windows 7 ENTERPRISE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>Hi all,
I have created an answer file using Windows SIM tool. Please find the answer file below:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Extend>true</Extend>
<Order>1</Order>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Letter>C</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Extend>true</Extend>
<Order>1</Order>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>DB_Data</Label>
<Letter>D</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>1</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Extend>true</Extend>
<Order>1</Order>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>Image_Data</Label>
<Letter>E</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>2</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
</DiskConfiguration>
<ImageInstall>
<OSImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
</OSImage>
</ImageInstall>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
<WillShowUI>Never</WillShowUI>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<AutoLogon>
<Password>
<Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</Password>
<Username>Administrator</Username>
<Enabled>true</Enabled>
</AutoLogon>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>cmd /c wmic useraccount where "name='Administrator'" set passwordExpires=FALSE</CommandLine>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<UserAccounts>
<AdministratorPassword>
<Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABBAGQAbQBpAG4AaQBzAHQAcgBhAHQAbwByAFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
</UserAccounts>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-ServerManager-SvrMgrNc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-ServerManager-SvrMgrNc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotOpenServerManagerAtLogon>true</DoNotOpenServerManagerAtLogon>
</component>
</settings>
<settings pass="auditSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<AutoLogon>
<Password>
<Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</Password>
<Enabled>true</Enabled>
<Username>Administrator</Username>
</AutoLogon>
<UserAccounts>
<AdministratorPassword>
<Value>YQBkAG0AJABwAHcAZAAkADQAJABtAGUAZABBAGQAbQBpAG4AaQBzAHQAcgBhAHQAbwByAFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
</UserAccounts>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/coem/workbenchwin2008/iso/sources/install.wim#my win2008 san install" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
It doesn't work. System configurations are,
-> system with out build-in harddisk
-> there were 3 disks from SAN
-> you can see that disks 0, 1 and 2 are configured in diskconfiguration section.
After constructing new COEM with this answer file, when i boot the system via DVD disk, in some point in time, i get the following exception:
the
target disk, partition or voume doesnot support the specified operations.
The
error occured while applying the unattended answer file's <DiskConfiguration> setting. Error code 0x80300024
any help would be appreciated.
Thank you
Regards,
Saravanan -
Windows can't find OSX partition
Windows, both under Boot Camp, and Parallels 6, used to be able to recognize the partition on which OSX is installed. It stopped recognizing it and I don't know why or how to fix it. My version of OSX is Snow Leopard; version of Windows is Vista Home Premium (32 bit). I have been thinking of upgrading to OSX Lion. Would that fix the problem? I am also thinking of upgrading to Parallels 7, but doubt that it would fix the problem since Windows does not recognized OSX partition even in Boot Camp.
I don't know if it's the same, but I removed a lot of devices in Device Manager (for example the and they get automatically reinstalled)
For example I uninstalled "Apple Broadcom Built-in Bluetooth" and "Microsoft Bluetooth Enumerator" under Bluetooth Radios and all devices under Human Interface Devices. To the point that no mouses or keyboards worked and I had to plug-in a wired USB mouse to go on...
When I say that I lost the bluetooth connectivity, I mean only my BT mouse (a MS Sculpt Touch mouse I bought yesterday. My Apple Wireless Keyboard works.
But my mouse dissapeared after reinstalling the bootcamp software and I can't for the life of me reinstall it again. It gets discovered but it gets an authentication error before pairing. Alternatively, I can right-click on the discovered mouse and check the HID BT services and when I OK it starts installing to dissapear after getting "succesfully installed drivers" -
Wireless not working "windows could not find a driverfor your network adaptor"
Hi, So I was just using my laptop normally then the wireless internet stopped working. When I troubleshoot why there is no connection it says "windows could not find a driverfor your network adaptor" Now I can only connect to the internet by plugging a cable from the laptop into the modem. Can some please help. Thanks
Hi ,
Welcome to the HP Forums! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. Thank you for posting. I have read your post, and I understand that your laptop could not connect to the wireless network. I am happy to assist you in the matter. I need you product number for offering the link for driver, or you could run HP Support Assistant to install the missing driver. Here is a document HP PCs - Troubleshooting your wireless network and Internet connection (Windows 7) you could follow for troubleshooting. Let me know if it helps. Regards, -
windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....as itunes does not pick up the phone I have connected anymore. My ipod synchs fine still and thats over 6 years old!
Hi rubicon7,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this information helps ....
Have a great day!
- Judy -
my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom -
Windows can not find ' FILE ': error.
I have downloaded and installed the production version of SQL Developer. (1.0.0.14.67)
Windows XP SP 2.
When I started it for the first time I checked all the file association check boxes.
If I double click on a .sql file the following windows error occurs:
Windows can not find '<file>'. Make sure you typed the name correctly, and then try again. To Search for a file, click the Start button, and then click search.
SQL Developer does startup. The error message is closed when the OK button is selected.
Any Ideas?
Regards;
RobertHi Robert,
Just to confirm, SQL Developer does actually open the file. The only issue is the error message displayed. I have logged a bug for that.
There is a work around until that is sorted. If you use explorer to associate the file types with SQL Developer, they open without this error.
Regards
Sue -
Keep getting can not find %appdata% file when trying to download itunes. do you know of a fix?
Have HP600PC with Windows 7 64-bit. Keep getting Can not find %APPDATA% file when I try to download Itunes and other software. Do you know of a fix?
Here you go, this should do it.
http://support.microsoft.com/kb/2258121 -
Window can not find a system image on this computer
I have HPPavilion dv6 3134se notebook.when I purchased.its operating system was windows 7 home basic.My friend suggest me to upgrade windows 7 ultimate.he also give dvd of windows 7.i have installed it.after3days a message appear from microsoft.that your copy is not original.ITry to get my previous windows 7 home basic.when i press F 11&force to recovery amessage apear tahat window can not find a system image on this computer.I try to my level find it a message appear.thatspecify the location of the system image.How search system image on the network pleasehelp me with url address&my hp recovery partion also now not loki ngcomputer.i hope some one help me.
This question was solved.
View Solution.Hi,
You're welcome, glad it helped
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
HT1688 My iPhone 4 will not turn on even when connected to a charger?
My iphone 4 is dead. Will not turn on even when connected to a charger. Have tried simultaneously pressing the wake/home buttons to no avail.
Hello fredswolf,
Thanks for the follow up and additional information. Based on the information you have provided, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
Apple - Support - Service Answer Center
http://www.apple.com/support/iphone/service/faq/
Thanks,
Matt M. -
My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc
My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help
You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
http://support.apple.com/kb/TS1538
Maybe you are looking for
-
IMovie, sound problems when i split the sound clip
I'm editing a movie and everything worked out fine until this week. When i put in a song in iMovie, and then split the clip the sound dies in both parts of the clip. The clip volume is still 100% but there's no sound. Even the songs i put in last wee
-
Can't open Epub files, but pdf okay
Hello, When I try to download an ebook from kobo, any pdf files open automatically in adobe digital editions. However, any epub files won't open as books, just zip folders. I've tried saving them onto my computer and opening them, but they save as a
-
D-Link DI-624 WEP wont connect to my iMac
When i start up my iMac, I login and then I click on the airport icon and turn it on. Then, I click open network preferences. Then i click on the drop-down and select Join Other Network. In that window, I type the network name, select the security wh
-
Production Order - Component Overview - Storage location
Hi, While i create Production orders, i do not see the storage locations for the components,listed in the component overview screen. I have maintained storage location & storage bins through MMSC transaction. Am i missing any config setting, so that
-
Printing from Safari is good. Prints good when sent to another printer in house (not updated to 7.0.1).