Windows XP not supported on Snow Leopard?

I have been reading through the forums and from what I've seen, I have gathered that Windows XP should be compatible with Snow Leopard (10.6.8) and boot camp. However, when I have windows booted and I insert the Mac install disc to install the drivers, I get an error window telling me that Windows 7 is required. Help?

See > http://support.apple.com/kb/HT4410
I noticed that Early 2011 and newer MacBooks Pro can only use Windows 7, so if you have one of those computers, you can only use Windows 7 on Boot Camp. To install Windows XP, download Parallels, VMware Fusion or VirtualBox and install it on a virtual machine

Similar Messages

Deskjet 5650 "not supported by Snow Leopard"

I upgraded to 10.6.5 from 10.5.8 and lost my color printer, HP Deskjet 5650. According to HP, Snow Leopard does not support 5650. All I get is an "err" message in the printer queue.
Contributor countryone77 on November 3 seems to be able mostly to use his 5650 in Snow Leopard. I get nothing, including an inability to download drivers.
Any suggestions?
Gordon McGilvray

a brody
Thanks for the information.
Mac's 10.6 Printer and scanner software does not list Deskjet 5650. So, it appears that HP is right.
Except for the referenced November 3 thread in this forum:
http://discussions.apple.com/thread.jspa?threadID=2636488&tstart=165
Gordon

Apple USB Modem Not Supported in Snow Leopard Running 64-bit Kernel Mode

Has anyone been able to get the Apple USB Modem to work with Snow Leopard (SL) when running SL in 64-bit kernel mode? I get an error saying hardware not supported.

I would suggest you take this question up in the MacBook Pro forum or perhaps the Snow Leopard forum. This forum is for question about older, Pre-G3 Apple hardware and so not the forum where you'll be most likely to get a quick and applicable response.
Regards.

Transparent PNG not working in Snow Leopard w Final Cut 3.5&4

I recently changed from a G5 mac to a Mac Pro. I had FCE HD 3.5 which supposedly is not supported in Snow leopard..although it did work.
Anyways, when dragging a PNG or PICT image to the base video layer, then dragging a transparent background(white)character image to a layer on top of that...I remember when i was in Macos X Tiger with FCE 3.5, after selecting the top layer and setting composite mode to SCREEN.. it would perfectly make the white background transparent. Awesome..
Well that hasn't worked since i switched to Snow leoplard. I thought it was a problem because i had FCE 3.5 so i bought FCE 4 yesterday
So i decided to upgrade and still doesn't work.
Instead of getting a transparent BG.. the top video layer where i placed the PNG image of a character with a white bg still has the white bg..and the inside of the character is semi transparent..
not what i want.
I even tried the new feature in FCE 4 where you go to Modify and Sepect ALPHA white. and that didn't work either.
What's going on.. ONly specific PNG formats have transparency in FCE???
By the way I'm exporting PNG out of a 3D program called DAZ Studio 3.That program doesn't have the ability to export as Animation CODEC( like in poser)or any other codec for that matter. it only exports movies as MOV or image series PNG or single PNG images.

Hi -
Here is a correctly formated PNG file with transparency.
You can download it to test in your sequence by Control-Clicking and selecting "Download Linked File As . . ." from the drop down menu [HERE|http://www.spotsbeforeyoureyes.com/Test.png]
You simply need to place it on a video track above any other clip to see if the effect works or not.
Please post if this graphic works for you.
MTD
Message was edited by: Meg The Dog

My iMac will not boot through Snow Leopard but will boot through Windows OS

My 2010 iMac will not boot in Snow Leopard, only Windows. Have tried reinstalling Snow leopard a few times and works only for a couple of minutes before freezing and doesnt reboot. Windows works perfect. Snow leopard just doesnt want to boot up past the Apple Logo. It was working fine one day and the next day it froze up and was able to reboot back into Snow Leopard but kept freezing. Now it doesnt load at all into Mac OS.
Brian

Possible scenarios:
1: The 10.6.3 SL retail disk is bad, it happens.
2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
3: Your optical drive is funky or some other hardware issues.
4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
Possible solutions.
1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
2: Make a SL bootable USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

Is there tech support for snow leopard

I'm trying to install windows 7 using boot camp. i'm a little discouraged. I've been waiting for about 40 hours for an answer to this question
https://discussions.apple.com/message/15218517#15218517
and have not gotten one yet. I'm afraid I won't get one. The nearest genius bar is an hour away so I'm not keen on spending two hours plus about 10$ in gas to solve this problem.
Do I get complimentary tech support with snow leopard. It doesn't look like i do but i want to be sure.

You get a certain amount (I forget how much) of free tech support with a new machine. Not with the purchase of Snow Leopard. If you have paid for Apple Care, then you can call them for free, otherwise you have to pay for phone support. Driving to the Apple Store would be cheaper, probably.

Canon MP620 print driver does not work with Snow Leopard

Bought a Macbook & bundled Canon MP620 printer in Dec 08. Two days ago upgraded to Snow Leopard, and I can no longer print (the printer is not recognized), it only sees "Bonjour scanner" (the printer is a multi-function printer, copier, fax, scanner). Spent more than two hours with two different Apple tech support people over the phone; talked to Apple personnel in store. My printer is connected via Ethernet cable to a wireless modem, and I connect to the wireless modem via Airport. The phone tech person insisted that this printer is supported by Snow Leopard, but we reloaded the print driver from the Snow Leopard installation disk with no results. Finally my last resort, which worked, is to go to Radio Shack and get a cable that has a USB-A (printer) to USB-B (Mac) attachment. I was able to print. It is unacceptable for Apple to have this problem, as I went into the store four different times to discuss whether I should upgrade to Snow Leopard, and was told on every occasion that Snow Leopard will make everything run faster, more smoothy, etc. NOT! I want Apple to post a notice on their web site to a) confirm their print driver problems with Snow Leopard and b) to confirm WHEN new print drivers will be released.

Have a look at my last posting re Canon network printing.
http://discussions.apple.com/thread.jspa?threadID=2128186&tstart=0&messageID=100 97438#10097438
i got my MP980 working via Ethernet and wireless. The same procedure should work for your MP620.
Pahu

OS will not boot after Snow Leopard Upgrade

I have a MacPro (Intel). I just upgraded to Snow Leopard and everything appeared fine. However, after restarting my computer the OS will not load. A circle with a hash through it replaces the Apple logo and the apple's spinning wheel continues but all drive activity. I have tried to run the install again by forcing the computer to open the dvd drive then booting for the OS DVD but this has not worked. Has anyone experienced this and successfully resolved?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Can I install Windows 7 without upgrading to Snow Leopard?

I have Windows 7 and I just bought the Snow Leopard upgrade disk. I want to install Windows 7 on its own hardrive (no partition) but without having to upgrade to Snow Leopard first. I am happy with Leopard and feel if it ain't broke, don't fix it.
I am wondering if I can just use Leopard to install Windows 7 onto the new drive, then boot into Windows 7 and use the Snow Leopard disk to install Bootcamp 3.0 and all the other drivers.
Does Snow Leopard have to be on the Mac in order to get the right EFI/Bios to run Windows 7 in XP mode, or does Boot Camp take care of that?
Thanks

AppleHFS is 'buggy' and HFS filenames can cause Explorer to hang (green bar) if it runs across any special character is doesn't like.
And yes, there is no requirement to be running SL. BC 3.0 also came out before Windows 7 (trying to jump the gun? pre-mature? wanted to get SL out the door before Windows). Newer SL DVDs usually also have later version of "3.0" Shame that 3.0 has to be installed and then updated instead of just a logical download/install of 3.2 (maybe put in any OS X DVD to verify you have it?).
Apple won't, they want sales of SL and pre-install. Any other source, and people have hosted it, not worth the risk, and violates terms of use posting it online.
Instead of using AppleHFS, which you rename to disable, there is HFS driver from Paragon as well as MacDrive8 (which has its own issue with 7). AppleHFS interferes and prevents using Windows Backup is also a concern.
I'm not sure I totally trust NTFS-3G to write to Windows 7, or allow cross platform read/write.
More and more, the tech specs and hardware or software requirements (requires 10.6 DVD is only for BC drivers), or ATI 5770 'only' works with 2009/2010, but doesn't and didn't say 10.6.5 or later), otherwise works with any Mac Pro (would be hard to prevent).

HT1689 What do you do if your computer is not upgradeable to snow leopard using Iphone 5

What do you do if your computer is not upgradeable to snow leopard using Iphone 5,
just purchased my new iphone 5 64gb- but does me no good if I cant back up pictures or add my music frm my computer even using icloud. How can I do the things I was able to do with the Iphone 4 now that the 5 will not be recognized at all by my Mac without shelling out thousands of dollar to buy an intel runnung computer just because the Apple software department cannot plug in backwards compatibility to new products such as the iP 5! My computer runs perfectly what am I going to do with two computers if I were to buya new one.
any one having the same stupid issue here or am I the only one frustrated with apple making new products and making people have to purchase, upgrade, pay for icloud storage when their home computers are completely capable of doing that which is the reason they bought them in the first place.

So just called apple for the second time about this issue. First time the tech i got on the phone i think was clue less about the problem. She recommended i buy a cd to upgrade my system and that would fix the problem and my os would be functional with iP5 , iTunes etc...
So i gave her my computer serial and required info so she could look up my system and make sure it would work. I was sold a cd convinced it would work after all apple care techs should know what they are doing right!?
Got the cd in the mail pop it in and nothing, error window saying need intel processor to install this cd contents ***! Yea thats what said today after the second call to apple. I did get another hint of hope from the tech i got on the phone today tho. He really seemed to know his stuff.., so now i fond out apple can replace your processor on certain model computers FOR FREE just pay the parts and you are ready togo with snow leopard and " anything apple throws at your computer" . Going to try this also and will post results soon for all you that may have some hope left...

Macbook pro will not boot after snow leopard upgrade

My GF has had a macbook pro since mid 2008. It's been running like a champ since I've known her for the past 3 years with no issues. It has/had OSX 10.5.8 installed. We tried to consolidate all our pictures from all our apple devices and realized she didn't have an icloud on the old 10.5.8 OSX. So I called apple and they told me to order and install the snow leopard OSX 10.6 first and then upgrade to lion etc after that, Well we got the disk yesterday popped it in to install and it's been a disaster.... the computer shutdown for what looked like a normal restart during the installation process and never booted back up. Attempts to manually reboot leave us locked on a grey apple logo screen with spinning gear indefinately whith the Snow Leopard disk installed during boot up. With the disk removed I get the flashing file folder with a question mark. I called apple support we tried all the PRAM and SMC resets and then decided that we should go to the Genius Bar once all those failed. After an hour and a half drive to the nearest genius bar we were told that the we suddenly had a hardware issue which just happened to coincide with the new OS installation.... I'm not buying it and am looking for some help. The macbook was running like a champ until we inserted a disk recommended by apple... Any takers?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Error installing Windows 7 on Macbook running snow leopard

I've been trying to install Windows 7 on Macbook running snow leopard. During the windows install, it goes through expanding the files and then fails with errors saying the installation files are corrupted. I've gone back to boot camp assistant, and removed the partition, and then re-partitioned and still see the same issue. Has anyone seen this problem?

Read the Boot Camp Instructions located here: http://www.apple.com/support/bootcamp/. You must use the same drive that contains OSX to install Windows using Boot Camp Assistant.
The Boot Camp community is located here: https://discussions.apple.com/community/windows_software/boot_camp
I've asked the moderators to move your post.

Is Snow Leopard part of the the gray MacBook Pro disks? I am having trouble burning a cd and was told to reload Snow Leopard? I do not have a Snow Leopard disk? Help!

Is Snow Leopard part of the gray MacBook Pro disks that were included with the computer when I purchased it. I DO NOT have a disk with SNOW LEOPARD written on it?

Maybe you should first tell us what your problem is. You may not need to reinstall Snow Leopard. Snow Leopard is what your installer disc has - 10.6. Reinstalling may also require installing a number of updates as well. Here's the basic reinstall process:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

My macbook air keeps on saying Microsoft windows are not supported on os x...what do i do?

my macbook air keeps on saying that windows does not support OS X
what do i do?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

Windows XP not supported on Snow Leopard?

Similar Messages

Maybe you are looking for