Windows xp on Gizmo usb drive

Could I load windows xp on a 4 GB Gizmo drive and run window from it and use it on my imac?

Some considerations:
1. Boot Camp is no longer functional on Tiger. The Tiger Beta expired in 2007. You must have Leopard in order to use Boot Camp.
2. The drive must be partitioned using GUID and formatted Mac OS Extended (Journaled.) The drive must be partitioned as one single volume.
3. You must be using an Intel Mac.
4. You must have Windows XP w/SP2 (32-bit) or Vista on a CD or DVD legal installer disc.
5. Realistically you need at least 1 GBs of installed RAM.
6. Your drive cannot currently be partitioned into more than one volume.

Similar Messages

How to install Windows 7 from a USB drive!

This is even easier than installing Windows XP from a USB drive, and will also reduce the time taken to install Windows 7, it took me about 15 minutes!
The advice in the guide is also applicable to installing Vista.
You need basically:
a USB flash drive at least 4GB in size
a Windows 7 DVD
To sum up:
Format your USB drive, with the NTFS filesystem
Open Command Prompt as an administrator, and run the Bootsect.exe program off the Windows 7 CD to make the USB drive bootable
Copy the contents of the Windows 7 DVD to the USB drive
Restart your PC, press F11 (or whichever key it is) to access the Boot menu, and select your USB drive to boot from
Full guide here:
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

Quote from: bnborg on 16-February-11, 10:28:04
I have done this and it is simple.
I cleaned and (re)formated an 8GB flash drive under Windows7 using diskpart. I chose quick format and a fat filesystem. It doesn't need to be ntfs. I had diskpart mark the partition active. I copied the DVD contents to the flash drive. I also made a folder on it for motherboard drivers.
After that, I booted the drive on a new machine. Windows7 setup came up, and didn't find any hard drives, other than the USB flash drive. I clicked the button to load drivers, and pointed it to the folder I had copied them to on the flash. Windows installed without problems.
Hi bnborg..Do u mind sharing with me your motherboard driver folder? I have the MSI U135DX Netbook and each time I hit the button to install Windows 7 it asks me for some mobo driver...Think i might need it to get tru with a successful install..

How to run windows from an external usb drive

Hi,
I've just install windows using bootcamp. after that i restore that windows installed bootcamp volume to an GUID partitioned external HDD. Now it is shown in startup disc, but when i select that (external HDD) volume it is unable to start.
I don't know what to do? I just want to run windows from an external usb drive like i can run mac osx.
please help. thanks

Windows will not run from an external drive.

Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

Tell my wife that!
This is the best I can do. This way you can use the 2011 MBA way to do things.
Look for the post from @jacktourist. (on page 2 about half way down) This seems to be the easiest.
There are a couple of more similar to this with pictures I've seen around but can't remember where.
Here's another search with added info. It's easier then it sounds.

TS3173 If I installed windows 7 without the USB drive inserted, do I have to start all over again or can I just restart the computer with the USB inserted?

If I installed windows 7 without the USB drive inserted, do I have to start all over again or can I just restart the computer with the USB inserted?

Following up: tried multiple restarts but ended up needing to remove partition an reinstall windows 7. Now if I could only find that Mac disk to install boot camp.........

Hp notebook15-r006tu window 7 32 bit usb driver

I want software of hp notebook15-r006tu window 7, 32 bit usb driver how can it possible.
ANAND SINGH

Hi:
Here is the USB 3 driver you need...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_141715_1&swEnvOid=405...

Windows 7 Install - Blackscreen/USB drive

Hello,
I'm trying to install Windows 7 Home Premium (64bit) on my iMac (late 2009) and unable to get past the dread blackscreen that is posted on the Apple Support help pages (http://support.apple.com/kb/TS3173).
I've reformated the USB drive, added the drivers as described, but unable to get past a certain point in the install. I can get to the Windows 7 install screen, reformated the partition and then it will reboot successfully a couple of times,. However when its at the "completing install" phase and it reboots once again, then it gets stuck at the blackscreen. I imagine its at this point that the drivers should be recognized on the USB, but aren't. Which is odd, as I'm able to use the screen, mouse and keyboard throughout most of the install without issue.
I assume it's because it is unable to find the drivers on the USB key and unsure what else to do. Does it make a difference which USB port I use? Also, the USB drive is "old" (5 yrs +). Perhaps that's an issue?
I'm stumped and looking for help. Feel free to ask more questions if you think I've left out some important details.
Thanks.

Well, seems the issue was actually the old USB key (256MB). Installed the drivers onto a new 8G USB and no issues. Worked like a charm.

Windows 7 installation from USB drive issue

I tried installing Windows 7 through a USB Thumb drive. I got an error message saying
"No device drivers were found. Make sure the installation media contains the correct drivers, and then click OK."
Please help me.

Hi:
See if either of the driver files I have attached work.
If they don't, I won't be able to assist you any further.
You will have to try each of them separately, because they have the same file names in the folders.
Download, unzip and copy just the files in the folders to a usb flash drive.
With the flash drive and W7 installation media plugged into the machine, boot from the W7 installation media.
After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.
You should now see the storage driver files listed.
If you check the box, it will only include the compatible driver.
Follow the prompts and hopefully, W7 will install.
Attachments:
HSeries.zip ‏115 KB
SB7xx.zip ‏115 KB

Installing Windows XP on external usb drive?

Hello,
I was wondering if I could make an IDE drive in a USB enclosure a bootable Windows XP drive?
I have on hand...
1 x Macbook Late 2008, Leopard format (my own)
1 x Macbook Late 2008, Partitioned with working copy of XP home edition (access to)
1 x iBook g4 Fujitsu IDE drive in USB enclosure 27.9 GB
1 x Windows XP Home edition w Service Pack 2 (original disc)
1 x Windows XP Corp edition w SP 2 + 3 (a copy)
I really DONT want to partition MY macbook, luckily I have access to one that already is, However I thought it may be handy to turn my old g4 drive into an external XP bootable drive...
Is this possible? and how? Thank you.

Hi Maczbook,
while it is possible to use an USB-Memory Stick or external harddisk to boot either OSX or Linux from it, Microsoft has made it quite difficult to do the same with Windows (XP or other).
They simply don't want it...
Only instructions I found are these http://tubeshards.wordpress.com/2006/12/05/install-windows-to-a-macintosh-usb-dr ive/
While they are a tad bit old (from the time of BootCamp Beta) they might be still useable.
Maybe worth a try.
Regards
Stefan

Install Windows XP on external USB drive - MSI 915P

I have a MSI 915P motherboard and i am trying to install Windows XP on my external USB hard drive. Everything is fine installing Windows XP but when it says to reboot the USB drive does not boot. Any help please?

BIOS is set to boot from USB device. It shows Windows XP Home Edition on my internal drive and XP Professional on my USB drive. Internal boots but USB hangs with a dark screen... ??? ??? ???

Installation of windows 7 software onto USB drive

I am following the procedures for setting up a windows partition on my Macbook retina Pro.
I cannot get the Bootcamp assistant to setup a USB installation disc. It will not copy the software onto the USB drive. I get the error "error installing windows7 software' Can I just copy the windows iso file just onto a USB drive initialised as a Fat32 drive?
Any solutions would be most welcome in getting past this

i suspect you haven't prepared the USB drive as a boot volume.
You can absolutely do this. It is detailed on CNET in the following article: http://reviews.cnet.com/8301-31012_7-20020513-10355804.html

Create Windows 8.x installation usb drive

I have a Lenovo k410 desktop that started with Windows 8.0. Then I added the Windows 8.0 Professional Feature pack.
Then the machines was upgraded to Windows 8.1.
Now I need to run a Windows Repair (not refresh or reset) which requires a Windows Install USB Flash drive or dvd.
When I try to run the Windows 8.1 create installation media here:
http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media
It requires the Windows 8.1 Product Key which I do not have.
I then found what I thought was the same tool for Windows 8.0, when I tried that utility and entered the Windows 8.0 Professional Feature pack Product Key, it would not allow me to proceed because it does not support feature packs.
I don't know the original product key, I cannot figure out how to get this out of the bios.
Questions:
1) Would anyone know how to get the original Windows 8.0 product key out of the bios?
2) Would anyone have other ideas on how I can complete a repair?
http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media
Thank you, Bill

Hi jessiedog,
According to the description, for the first question, I would suggest to turn to Lenovo for support about this, because this key is an OEM license together with the computer itself.
As for the second question, you can not repair a Windows 8 system with a Windows 8.1, vice versa. In this case, I would suggest to create a recovery drive instead in the way below:
http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive
Regards
Wade Liu
TechNet Community Support

Installing windows 7 from a USB Drive(Suitable for netbooks)

1. Convert your Setup DVD to an ISO
If you only have DVD-based install media, you must first convert this disc to an ISO file. (Remember that you must use the 32-bit version.) Insert the Setup DVD, close the Auto Run window, and then run ImgBurn. In the main ImgBurn window, choosecreate image file from disc. (Optionally change the destination location to your desktop or somewhere obvious.) Click the graphical Create Image button in the bottom left to create the image. ImgBurn will create two files, the ISO you need and a separate unnecessary file that ImgBurn could use later.
2. Copy the ISO to a USB key
Launch the Windows 7 USB DVD Download Tool (as it's identified in Start Menu Search) and insert the USB storage device you want to use. In Step 1 of the application wizard, choose the ISO file you created in the first step of these directions (or the ISO file you downloaded from Microsoft) and click Next. In Step 2, choose USB device. In Step 3, choose the appropriate USB media from the drop-down list and then click Begin copying. The tool will (slowly) create a bootable USB-based install media. (Note that you must first copy any data off of the USB device as it will need to format and overwrite it.)
3. Backup your existing data with Windows Easy Transfer
If you want to back up your existing documents and settings, the next step is to runWindows Easy Transfer. On the netbook, boot into the current Windows XP-based environment and insert the USB key into a spare USB port. Navigate to the\support\migwiz folder (typically D:\support\migwiz) and run migwiz.exe, which is the executable file for the Windows Easy Transfer utility. Use this utility to backup your personal data.
4. Clean install and activate Windows 7
Next, you need to reboot the netbook and boot off of the USB key. (How you do this will vary from machine to machine--for example, on my son's netbook, you hit the F12 key to pick the boot media--but you should see a message on the initial BIOS screen telling you how to make it work; otherwise, check your netbook's documentation.) Run Setup normally, choosing the Custom install type (not Upgrade). Be sure to try and enter your new Windows 7 product key during Setup as well, if that option is offered. You may also get a choice to use the existing disk (in which case a windows.old folder structure will be created)
Source: www.winsupersite.com
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

I think you need to fix your links, you seem to have maybe copied the post from another board / forum, the link style you have inserted doesn't work here.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

I've downloaded Windows 7 onto my USB drive and Boot Camp does not recognize the disk.

Following the Apple Support manual, I've initiated the creation of a partition and downloaded Windows 7 from Microsoft's online store to a USB disk. When I attempt to initiate the creation of my partition to install Windows 7, I receive a notification that my installer disc could not be found.
Thanks in advance!

Welcome to the Apple Support Communities
If your Mac has got the SuperDrive, you can't install Windows from a USB disk

What do I do if my Mac doesn't support installing Windows from an external USB drive or DVD?

I have connected now: an external hardrive with windows support software, and a disc with Windows 7 ISO files on it. I have tried to run bootcamp assistant, but when I am given the first dialogue box titled "select tasks", I am not given the first option which should be "create a windows 7 or later install disk". If I skip to the next screen anyway after checking the other options, bootcamp assistant tells me "the installer disc could not be found Insert your Windows installer disc and wait a few seconds for the disc to be recognized", even though my DVD with the windows ISO file is in the computer. How do I fix this? Do I need to get an actual copy of the Windows software DVD instead of a DVD with the ISO image on it? Because it seems like my system does not support the ISO DVD. Eeep!

Thanks Phil0124. I was able to mount the ISO onto the DVD from my disk utility but now I face another problem. Bootcamp recognized the disc and started to install Windows, but stopped and gave me the following error message: "your disc could not be partitioned An error occurred while partitioning the disk".

Windows xp on Gizmo usb drive

Similar Messages

Maybe you are looking for