Windows xp partion side has virus cannot open

My windows xp partion side has a virus. When i get to log in the main screen comes up then kicks out quickly to a blue screen with info but disappears so quickly I cannot read it, then the computer loops to restart again. How can I fix to enter the xp side. Mac side is fine.

I would try hitting the F8 key when it boots or before it gets to the BSOD, choose Safe boot, if you can get in, change the "Automatically reboot" setting in System Parameters or uncheck the box. It is set that way by default, so when it pukes it restarts and does it over and over.
Don't you have some old clunker you can install that on?

Similar Messages

IPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

iPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.

I was able to get it fixed. I had received some responses and they had me
recreate the library I believe. It's been a while so I cant remember
exactly what I did. I have since upgraded to the latest i photo version and
have had no problems with it.
Brian
On Friday, November 7, 2014, Apple Support Communities Updates <

A networking error has occurred: Cannot open file (-3001)

When I attempt to use Software Update I get the following message: "A networking error has occurred: Cannot open file (-3001)"
I am connected to the Internet, can connect with iDisk no problem. Manual downloading also works.
Any ideas? Do I trash a corrupted file or what?
Many thanks in advance.
John
Message was edited by: [email protected]

I troubleshot this problem with a helpful Apple tech person who provided a workaround:
Establish a second identity. After you log out of your own identity and into the second identity, you can successfully use software update. He had me trash a number of items deep within the system but nothing else worked. I also ran the Utilities program both off the system and the 10.5 disk with no effect.
So far then, the only solution appears to be the second identity route or to manually download and apply updates. Quite a mystery I'd say!
Any ideas out there?

Have bad virus cannot open firefox or any other exe. file, where within firefox (what does firefox name folder that contains passwords) does it keep my passwords for various bookmarks

because of a virus I cannot open Firefox or nay other exe. file. I need to retrieve my passwords for all of my bookmarks. Where within Firefox can i find the folder that has these passwords, what is the name Firefox gives this folder!!
thanks, Mitch

further observations :
22:24:31:868 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.66, mac=
22:24:31:868 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.66)
22:24:31:869 LOG_CLIENT_DB:HHetting client adaptation to 49 (ip=192.168.1.66)
22:24:36:878 LOG_CLIENT_DB:The entry found in known clients list is already validated (ip=192.168.1.66)
22:24:36:878 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.66, mac=
22:24:36:878 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.66)
22:24:36:879 LOG_CLIENT_DB:HHetting client adaptation to 49 (ip=192.168.1.66)
22:24:37:926 LOG_CLIENT_DB:The entry found in known clients list is already validated (ip=192.168.1.76)
22:24:37:926 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.76, mac=
22:24:37:926 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.76)
22:24:37:927 LOG_CLIENT_DB:Ignoring client with fixed flag = TRUE (ip=192.168.1.76)
22:2
thisnthing keeps on probing itself ... i wonder why. (.66 is the NMH .76 is my pc ... ) it is also strange it cannot retrieve its own mac address....
Oh , you can turn off the logging features again when done. it only takes time and diskspace on the NMH
And before i get flamed : the comments i make about 'broken source' : i have no gripe with linux. I have a problem with companies that grab a bunch of stuff that is free ,slap it together, sell it for a lot of money and give no support to the people that bought it. They want all the money for no effort .. they turn open source into broken source ...

Safari 5.0.6 is not downloding in my old g4 powerbook it say anetworking error has accurred cannot open file (-3001). but i connect the internet but its not downloding

i can not downlode safari 5.0.6 in my old powerbook g4,need some help its say (-3001)file can not open.

Actually if you look to the right of this page in the "More Like This " section you'll see people reporting a -3001 error message when using Software Update. I think these are quite old discussions but among the solutions are a Permissions Repair or updating through a new user account. It would cost nothing to try.

I have downloaded Icloud into windows 7 supported pc. I cannot open

I have an icloud account on my ipod touch. I have windows 7 in my pc and have downloaded icloud. When I sign in a I get a message stating Apple ID is good but not for PC?

Are you signing into the same account as the iPad is signed into?

Vendor cannot open attachments

Hi all!
We are using bidding engine (SRM Server 5.5). Vendor logs into our system using SAP WEB dispatcher. Login works fine, but when opening of the attachments in the bid invitation doesn't. System opens a new browser window for the attachment, but it cannot open it.
The attachment browser window has direct URL into the system, not through WEB dispatcher and therefore can't open it. I imagine that's the cause for this. How can I change the URL in opening the attachments to use URL through dispatcher?
Thx, in advance

Hi
The URL in the email is generated based on EXT_ITS attributes in the PPOMA_BBP. You can also change the URL by BADI BBP_CHANGE_URL.
Are you using integrated ITS (then the WAS) or a standalone ITS ?
Have a look at BADI BBP_CHANGE_URL that can be used to change generated URLs for docserver SICF service.
I used it to translate attachment URL, available for Suppliers via my customer's portal.
In SRM 4.0, you should find an implementation:
this is a implementatopmj that deals with the behaviour
of an application server, where in ICM HTTP is configured
but HTTPS not. In that case attachments are not displayed
if you logon to seperate ITS with HTTPS.
Go to Transaction - SE18 , give the BADI name as BBP_CHANGE_URL there and then on tha application toolbar Select Enahancement Implemenetation -> Create. Then follow the steps told by Marcin, Give any name of the Implemntation starting with either Y or Z character name (say, ZBBP_CHANGE_URL) and so on... Here is another sample code of this BADI Implementation using SE19 Transaction.
METHOD if_ex_bbp_change_url~change_url .
DATA:
lv_prottype TYPE syindex VALUE 1,
lv_prot TYPE plg_name,
lv_host TYPE plg_host,
lv_port TYPE plg_srv.
* this is a implementatopmj that deals with the behaviour
* of an application server, where in ICM HTTP is configured
* but HTTPS not. In that case attachments are not displayed
* if you logon to seperate ITS with HTTPS.
IF iv_url IS INITIAL.
CALL FUNCTION 'TH_GET_PLUGIN_INFO'
EXPORTING
protocol = lv_prottype
IMPORTING
name = lv_prot
host = lv_host
service = lv_port
EXCEPTIONS
no_plugin_active = 1
internal_error = 2
OTHERS = 3.
IF sy-subrc = 0.
* http://host:port
CONCATENATE lv_prot
bbpoa_http_colon
bbpoa_http_slash
bbpoa_http_slash
lv_host
bbpoa_http_colon
lv_port
INTO ev_url.
* add /srm/docserver
CONCATENATE ev_url
bbpoa_http_slash
bbpoa_http_path_sap
bbpoa_http_slash
bbpoa_http_path_ebp
bbpoa_http_slash
bbpoa_http_path_docserver
bbpoa_http_slash
sy-mandt
INTO ev_url.
ENDIF.
ENDIF.
ENDMETHOD.
Maybe better way is to use BADI BBP_CHANGE_URL ?
In method Change_url try write something like this:
if iv_url cs '/docserver/'.
replace 'serverprod:50' in ev_url with 'serverprod.df'.
endif.
Please provide the SRM system version details in next reply, meanwhile please go through the following SAP OSS Notes ->
Please go through these SAP Consulting OSS Note / Pointers given below->
Re: Attached documents can't be displayed
Re: Attachment in SRM
Re: problem with reverse proxy apache and docserver service
Note 847636 Attachments are not displayed: BBP_ROOT_URL
Note 588597 3.0: Attachment display by HTTP service
Note 605323 3.5: Attachment display by HTTP service
Re: SRM 5 - authentication request attaching documents in SC
Hope this will help. Let me know incase you face any issues.
Regards
- Atul

Error Message when installing updates: "Cannot open file (-3001)"

I have a MacBook3.1. with Mac OS 10.5.7. Three days ago I installed 5 to 6 updates for iTunes, iDVD, AirPort Express, Java, etc. After the installation, I could not access the internet because my AirPort wireless on the Mac was off (non-existent). I could not even scan for my network. I could not access iTunes, in fact when I opened iTunes, the application got stuck and I could not even "force quit" the application. I went to the Apple Store and was told to Re-install the original OS discs (10.5) received with the MacBook, which I did. After the installation things seemed to be back to normal. I was able to access the internet, etc. However, I could not open iTunes because and I paraphrase "the iTunes version that created/supported the application is not.....". OK so I need to update the software. Now, when I tried to update the software with the newly installed "re-install" 10.5 OS I received the following message:
"A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the Internet, then try again."
Meanwhile, I was searching the internet googling the above message. So internet access was not the issue. I decided to create a "test" admin account to see if I could update from another account. Low and behold, I was able to access and update each new software update from the new "test" account and ultimately open iTunes from my personal (main) account.
Very confused and could use some guidance. Any ideas?

Welcome to Apple Discussions:
My general rules:
Never install more than one update at a time - especially those requiring a reboot.
Whenever possible, use the manual updates and for OS updates, always use the manual combo update.
If a problem does occur, reinstall any "bad" updates with manual updates. Yes, they can be reapplied.
Again, one at a time.

CS5 InDesign cannot open files in the InDesign CS5 document format

I'll be working in InDesign CS5 with no problems then at some point I'll double click on an InDesign file and a window comes up and says - InDesign cannot open files in the InDesign CS5 document format. Sometimes when this happens I have to completely reboot my whole system before I can get InDesign to function correctly. Is this a flaw with CS5? Did not happen with previous versions. It doesn't always happen but I can't figure out what causes it. Would appreciate anyones help. I'm getting to really HATE InDesign!!

I have not uninstalled and reinstalled, but I did just switch over to another workstation using Time Machine. The previous system was Leopard. This one is running Snow Leopard.
I'm not sure how to parse this. When you say "switch over to another workstaiton using Time Machine" do you mean, "started using another machine that happens to be using Time Machine for backups and is also running 10.6 instead of 10.5"?
Or do you mean, "Used the Time Machine program to upgrade from 10.5 to 10.6?" If you mean the second one, well, I can't say I am surprised that things are messed up. And that would make your problem rather different than the other posters, which is good reason for you to have started your own thread (and thus your own solution)....
I'm a little bit leary of getting in and changing things in Terminal, without understanding what I am changing. Plus this is a workstation at work, so if I screw something up, that is not a good things, and I don't have time to spend a day fixing things back up again, with the way our workload is.
Well, you can find a lot of marginal documentation about lsregister and Launch Services, but I wonder whether your understood the ramifications of messing with Time Machine (or maybe I have misinterpretted you!). I'd be surprised if you found another way to fix this, other than uninstall/reinstall.
Good luck.

Data Services 12.2.2.0 cannot open connection to the repository NEW Install

I can connect to the repository DB using Toad and SQL Management Studio, but I cannot connect with DS. I've tried 12.2.0.0 and most recently 12.2.2.0 - nothing is working, any helpful advice is appreciated.
DS SERVER
SAP BusinessObjects Data Services XI 3.2 on Windows 2008 Server Standard 64bit SP2
DBMS SERVER
SQL 2005 (Microsoft SQL Server Standard Edition (64-bit)) on Windows 2K3 Server R2 Enterprise SP2 64bit (Microsoft Windows NT 5.2 (3790))
ERROR
Cannot open connection to the repository. The error message from the underlying DBMS is <ODBC call <SQLDriverConnect> for data source <10.101.212.35> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]Invalid connection.>. Notify Customer Support.>. (BODI-20006)
DS VERSION
SAP BusinessObjects Data Services
Version: 12.2.2.0

Hi,
which middleware are you using to connect to the sql2005 server ? For DS3.2 SP2 noyl the following middleware is supported to connect to MS SQL2005 RTM - SP3
Microsoft ODBC MDAC 2.8 SP1 or later
Regards
-Seb.

"cannot open...required .xml" again

Has anyone been able to open a pages file that has the cannot open .xml required error?
I opened a doc from pages'08 in pages'09 made some crucial changes saved as new name and cannot open it again now.
I tried opening in '08 and of course no luck.
I just finished 3 hours of writing and cannot do that again!!!
Thanx for any help.
Jean-Michel

CG_AUDIO wrote:
Has anyone been able to open a pages file that has the cannot open .xml required error?
I opened a doc from pages'08 in pages'09 made some crucial changes saved as new name and cannot open it again now.
I tried opening in '08 and of course no luck.
I just finished 3 hours of writing and cannot do that again!!!
3 hours of writing without no intermediate save in different files is silly.
Attach the file to a mail
send them to my maibox.
I will try to revive the raw text.
Click my blue name to get my address.
IMPORTANT: search for the keystring _"backup, backup"_ in existing threads !
Yvan KOENIG (VALLAURIS, France.) jeudi 20 août 2009 20:09:19

Cannot open persistence.xml nor orm.xml

I had to kill JDev process after I realized Data Control could not be created on a session EJB since application was not created with JSF,EJB technology. JDev kept trying to create Data Control. I left it trying over night and in the morning I killed process. I restarted JDev and tried to open files persistence.xml and orm.xml, but JDev just showed up message "Loading...Please wait." and it was stuck with that message. I could open all other files except these two XML files.
Is there a workaround?

CG_AUDIO wrote:
Has anyone been able to open a pages file that has the cannot open .xml required error?
I opened a doc from pages'08 in pages'09 made some crucial changes saved as new name and cannot open it again now.
I tried opening in '08 and of course no luck.
I just finished 3 hours of writing and cannot do that again!!!
3 hours of writing without no intermediate save in different files is silly.
Attach the file to a mail
send them to my maibox.
I will try to revive the raw text.
Click my blue name to get my address.
IMPORTANT: search for the keystring _"backup, backup"_ in existing threads !
Yvan KOENIG (VALLAURIS, France.) jeudi 20 août 2009 20:09:19

So I have a file on my desktop and I cannot open it, move it to a folder, or delete it from my mac. I dont know what it has in it, and that makes me suspicious. What can I do to remove this unremovable file from my computer? Is it a virus?

So I have a file on my desktop and I cannot open it, move it to a folder, or delete it from my mac. I dont know what it has in it, and that makes me suspicious. What can I do to remove this unremovable file from my computer? Is it a virus?

First, I would recommend repairing the hard drive with Disk Utility.
If that doesn't fix the problem, there's a very dangerous command you can execute in the Terminal. This is very hazardous, because a simple typo can result in very drastic consequences. I have seen people erase their entire hard drive by putting a space in the wrong place! So, please follow the directions I'm going to give you very carefully!
Open the Terminal, which is found in the Utilities folder in the Applications folder. In the Terminal, enter the following:
sudo rm -f
Make sure to put a space after the "-f"! Then, drag the troublesome file from the Finder and drop it on the Terminal window. That should insert the path to the file in the command. Then go back to the Terminal and press return. You will be asked for your password, and when you type it, nothing will be shown as a security measure. Press return again after entering your password. The file should be deleted.

I tried opening my Mac files to windows by using Macdriver 8, however upon opening the file my previous mac folders were converted to windows shortcuts and upon returning to my mac pc, all my folders has a .lnk file extension which I cannot open.

I tried opening my Mac files to windows by using Macdriver 8, however upon opening the file my previous mac folders were converted to windows shortcuts and upon returning to my mac pc, all my folders has a .lnk file extension which I cannot open. Need help very badly since the hard drive I use is the only back up I have for my very old pics. Thank you...

Backup with cloning software your HD to have an exact copy of it as it is.
Use this methodology to recover your partition.
Have fun,
Leo

I cannot open itunes on windows. It keeps saying short cut has changed or moved no longer working properly. I have tried everything. can someone please help. I have a older version of windows running. I cannot even do a repair on my computer

I cannot open itunes on my windows (older verson of windows) It keeps saying short cut has change or moved and no longer working properly. I have tried to do a repair on the file but the computer wont let me. I have tried reinstalling itunes but still not working. Is there anything you can sugguest please as I need my itunes.I have looked through the support questions and have tried everything. I have on Bonjour on my computer. Thanks heaps.

See Troubleshooting issues with iTunes for Windows updates for a complete set of iTunes rebuild steps.
tt2

Windows xp partion side has virus cannot open

Similar Messages

Maybe you are looking for