Windows xp printer sharing to Mac OS 10.6.7

Hello everyone?
Im mac newbie. My small office network have 2 computer. 1 computer is a windows XP and another one is macbook. My network solution is wireless. I'm installing and configure canon mf4680 printer on my windows xp computer. Then sharing and I wanna add printer on my macbook. I was following this guide
http://macs.about.com/od/macwindows/ss/sharewinprinter.htm
all installation and configure succesfully done, but im printing on macbook i recieved error code. This error is printer driver error -50 etc, sorry im missed.
Pls help me guys how can install sharing printer on my macbook?
Pls apologize my english skill

Unfortunately it is not possible to use the Canon MF series from a Mac when the printer is being shared by Windows. This is due to limitations of Canon's UFR2 driver for OS X.
But if your wireless router has an Ethernet port then you would be able to print from the Mac and from Windows if the MF4680 Ethernet port was connected to the Ethernet port of the wireless router. All the printer will require is an IP address, which the router can assign automatically (DHCP). If your wireless router does have an Ethernet port and you need information on how to set the MF4680 to DHCP then please reply.

Similar Messages

  • Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

    Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
    My Mac runs lion and the windows desktop runs Windows XP
    I have tried for a few hours or so to connect my mac to this printer over a home network.
    For your information it does work when connected directly to my mac using a USB Cable.
    If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

    In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

  • Printer Sharing with Mac on a Windows dominated network

    Hey guys,
    So basically, for the past few weeks I've been trying to get my printer connected through the network so I can print wirelessly. Basically, from my research, I need to get my Mac connected on the "homegroup" of the Windows network. However, when I try to connect, it asks me for a username and password. My computer doesn't have a password -- and I don't want to put one because it's a shared computer. Is there a default password? Or am I forced to put a password on that computer?

    rversed wrote:
    Basically, from my research, I need to get my Mac connected on the "homegroup" of the Windows network.
    If a Windows computer was sharing the printer that you want to connect to, then this would be the correct action to take. But if the printer is networked, either wired or wireless, and not shared by a Windows computer then you could connect your Mac directly to the printer if you connect to the same network.
    As for the "homegroup" this is a WIndows only setup introduced with Vista. Your Mac cannot connect to a homegroup. So do mean workgroup?
    rversed wrote:
    However, when I try to connect, it asks me for a username and password. My computer doesn't have a password -- and I don't want to put one because it's a shared computer. Is there a default password? Or am I forced to put a password on that computer?
    When you want to connect to a Windows shared printer you will get prompted to enter a Windows username and password before you see the shared printer. So you do not enter your Mac user details. Have you been provided with a Windows account you can use?

  • How to create print sharing for Mac and PC computers

    Hello~ I hope someone can answer these questions... Thanks!
    We are a small design office. We have trouble printing recently after we upgrade our Mac OSX v10.4.
    We have:
    2 PC computers (Window XP Home Edition)
    1 Power Mac G4
    1 Power Mac G5
    1 PowerBook G4
    1 Epson Stylus Pro 4000 large format printer
    1 hp laserjet 3030 fax/copier/printer
    We used to transfer the PC files to the server and print from Mac. We were able to print with 'shared printer' if one Mac computer is connected to the printer. After we upgraded 1 Power Mac G4 to OSX v10.4, we can no longer use the 'shared printer' for the other Mac computers. We cannot find the printer under 'shared printer' in the Adobe application, such as Illustrator and Photoshop.
    We would like to set up the print sharing system that both Mac and PC computers can send files to the prints without putting files to the server or switching the printers. Can anyone help please? Many thanks!
    Power Mac G4   Mac OS X (10.4.4)  

    There are a couple of disadvantages with formatting a
    disk as FAT32. Firstly, there is a limit on the file
    size for FAT32. I think it like 2 GB so if you
    capturing video the results will probably not fit
    into this file limit. Secondly FAT32 will not be
    bootable. I alway clone my system to a backup disk as
    bootable. That way if anything goes wrong with my
    system, I can just boot from my backup disk and fix
    it.
    The problem with doing this though is that the drive will not be usable with Windows (which was in the original posting) unless you use the third party MacDrive software on the PC.
    iFelix

  • How to share an usb-connected Windows Vista Printer with a Mac Mini

    Hi,
    I own a laptop Sony with Windows Vista (64) which has a printer connected via USB. I recently purchased a MAC MINI (middle model) and wanted to use my laptops printer for printing from my Mac mini. is this possible? thanks. Mx

    Hey there Max,
    If you can’t find the printer in the network browser, it may be easier to add the printer manually using the URL field, as shown in the article below.
    Mac OS X: How to manually add a Windows shared printer - Apple Support
    Ciao,
    -Jason

  • Windows 7 Printer Sharing

    I have a HP PSC 2410 connected to a computer running windows 7.  Win 7 detected and installed the printer just fine and there are no issues printing.  I have a laptop running XP and I'll be darned if i can get the Win 7 computer to spool print jobs for the laptop.  Works fine when I boot into Vista.  I have the print sharing set up and I can see the XP machine from the Win7 machine just fine.  Everything I have read says I need to install the XP drivers on the Win 7 machine.  Does this mean I need to download the large, all-in-one file for XP and install on the Win 7 machine?  Just concerned this may cause an issue.  I've looked just for just the driver file to no avail.  Any ideas?
    Thanks!

    I too am stumped, seems no one has an answer.  Looks like we will need to upgrade the laptop to Win 7 in order to be able to print.  Although I was able to print using the RC version, now using the RTM version thats now not the case.
    I did try installing XP drivers onto the WIn 7 PC, but wouldn't install no matter what method I tried.
    And since HP won't be developing Win 7 drivers anytime soon, we'll just have to wait.
    Unless anyone knows differently!

  • Problems with file/print sharing between macs

    I just recently created a network between my mac pro and my imac. I discovered that the only way that I could share files/printers between the two is if I shut off the firewall on both machines. If I let the firewall 'allow only essential services ie, file and printer sharing, the machines would see each other and the printers, but would not allow either to connect. Any suggestions?

    Thanks a lot Frank.
    The firewall has always been disabled, since I baught my iBook.
    There's two issues, the irc app and the videocam app.
    Guess the videoapp is an easier issue. The port is 2000-2002
    The irc application is I think a little more complicated, it has two settings in the prefs file (the app is IRCLE):
    1. In the DCC prefs I flagged the "ADSL, Airport, IPNetRouter and have flagged the auto configure for the Public IP Number (151.51.138.131).
    2. There is also a Firewall prefs. I haven't done anything with this. There's an areal called "Ident Settings (OS X only)". There one can flag the "Run Ident on a different port than the usual 113" If one flags that, then you can choose the port (it says it must to be 1024 or greater). "Note: you may need to change your firewall rules to make ident work this way, redirect incoming ident data for TCP port 133 to the port set above"
    Does this make any sense?
    Thanks a lot again, really,
    Emmanuel

  • Connect Macbook to printer shared on Mac from a different subnet

    I have 2 printers shared from a Mac Mini (OS C 10.8.4) and I need to setup a Mac on a different subnet to use them.  The Mini already has shared folders that I can access from either location.  The printer only shows up when I am on the same subnet as the Mini.

    Read about Bonjour sharing:
    http://www.grouplogic.com/Knowledge/PDFUpload/Info/WanBonjour_1.pdf
    It will help us to give better answers if we know the printer models.

  • Windows Vista Printer Sharing - Error: 256

    I am trying to share an Epson CX4800 printer that is connected to my Vista PC with my iMac. When I try to add the printer from my iMac using Windows Printing, I can see the Vista machine. I select it and enter the username and password and receive the following error, "Unable to connect to server with the provided password and user name. Error: 256".
    I am able to mount my Vista Public drive and share files. Why can't I share the printers?
    Thanks.

    I found my answer at this web post
    http://discussions.apple.com/thread.jspa?messageID=6819799
    the post by Hade tells how to add an "advance button" to the add printer window
    then you use this button to add a windows printer using
    smb://user:password@workgroup/computer/printer
    Message was edited by: ronw52a

  • HP printer shared between Mac & PC

    After searching the forums I am having to post.
    I have a Deskjet 5550 connected to the mac.
    I cannot get the printer to print from the PC.
    I know they see each other as I am able to access the PC files from my MAC.
    I am in the process of making the switch so if you wouldn't mind dummy up any suggestions.
    I must be missing a major step??

    Major step - on the PC, use a color postscript driver (Apple Color LaserWriter is good). This sends postscript from PC to Mac - the Mac print queue expects postscript input.
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1770.html

  • Print sharing Ubuntu & Mac OS X

    Hello everyone!
    I need some help from the experts! I have an hp LaserJet connected to a PC running Ubuntu. Printer works with the PC, and I just made it available to the network. Then I went to a Mac and tried to reach it via CUPS, but probably I'm skipping a step somewhere. I'm trying to reach it with the IP address of the ubuntu computer and pointing to port 631. However it can not reach the server. It's says access is denied.
    Can someone please tell me what is missing and whether I should change the cups.conf file in both computers?
    Thanks!
    MiniMac   Mac OS X (10.4.5)  

    Thank you Greg,
    Unfortunately I don't habe a KDE printer wizard, so I went to modify the cupsd.conf according to two sources that I found on the web:
    http://linuxprinting.org/~till/printing-tutorial/tut.html
    However, whenever I do that change, the printer stops working on Ubuntu, and of course then it is not recognized by the Mac neither. That happens irrespectivly whether I restart the CUPS daemon or not.
    Anyway, with the original cups.conf it works just fine for the ubuntu... But I'm not able to see it on the Mac.
    I'm really confused now, I don't understand why the changes in the cups.conf prevents the local machine to recognize the printer.
    Thanks again!
    MiniMac Mac OS X (10.4.5)

  • Canon Pixma MX300 Printer sharing through Windows PC

    I have a canon mx300 printer hooked up to a windows pc and share it wireless throught aiport extreme with a Macbook pro and Macbook. Thing is I can not use the CD that came with the printer to install the drivers on the MACS. They will not work when I try and connect to the printer throught the windows pc. I can not even find the Pixma MX300 on the mac printer list yet they sell it on the apple site.
    I have gone to canon site and downloaded the latest versions of the drivers but when connecting through the windows pc those versions still do not work. Only thing I have been able to do is try a preloaded driver found on the Mabook Pro/Macbook but they do not work 100%. Paper feeds funny and colors do not work correct. Any recomendations.

    The easiest thing to do is install Bonjour for Windows on the PC. Then, your Mac will be able to find and use the printer.
    However, from the Mac's point of view, the printer is no longer a Canon printer. It is a Windows printer and you have to go through the Windows SAMBE printer sharing features.

  • Trying to print from a Windows XP laptop to a Mac Home Network

    Help! I have a home wireless network (netgear) using a DSL line. I have an iMac G4 and an iMac G5 cabled to my wireless router and I have an iBook G4 running wirelessly on the network. In addition, I have an Epson C84 cabled to my iMac G4's USB port. All the computers can print flawlessly to the C84 using printer sharing in OS X 10.4.6. My problem is this: I also have a Windows XP laptop that uses this home network for internet access (which it does with no problem) but I want to be able to print to the C84 printer as well from the Windows laptop. I cannot seem to make it work. I have turned on "Windows" and "Printer" Sharing in OS X preferences and I have also tried loading "Bonjour for Windows" from Apple onto my XP laptop but that doesn't work either although it seems to "see" the printer - but gives me a connection error message and won't print.
    Does anyone have any suggestions? Thanks.
    iMac G5   Mac OS X (10.4.6)  

    Are you running the windows firewall?
    Try this: http://docs.info.apple.com/article.html?artnum=301514

  • Can i print from my mac to a win 7 printer?

    I have done a search and was unable to find the answer to my question. I have tried to figure out how to print from my MBP to my wifes printer that is attached to her windows 7 computer. I am able to print to that printer over the network with a windows computer but not my mac.
    Does anyone know how to get this done or if it is even possible?

    Printing from your Mac to a printer attached to a WIndows 7 printer can indeed be done.
    It use to be quite easy under Windows XP or even Vista, But Microsoft changed the SMB code in Windows 7, making it more of a headache.
    Here is how to share your Windows 7 printer:
    http://macs.about.com/od/printersharing/ss/Printer-Sharing-Share-Your-Windows-7- Printer-With-Your-Mac.htm
    You may also find this helpful for sharing files with Windows 7 and your Mac:
    http://macs.about.com/od/networking/tp/Windows-7-And-Mac-Os-X-Getting-Windows-7- And-Mac-Os-X-To-Play-Together.htm
    Tom

  • Print to windows attached printer

    Hi!
    I am facing a "small" problem here in my home lan. I have to computers connected. One is running Windows XP and has attached an Epson Stylous C60 printer. The other is running redhat 9 (2.4.8-20smp)
    I have managed to make thw two boxes "talk" via samba.
    $ rpm -q samba
    samba-2.2.7a-7.9.0
    I can read/write from one box to another without problem. The windows can see the linux through the lan and the linux can see the windous after mounting the share. But the thing I cannot do is print from linux to the windows attached printer.
    First of all I checked if the printer is supported redhat and I found out that it is.
    http://www.linuxprinting.org/show_p...pson-Stylus_C60
    So this eliminates the obvious question: Can you print with this printer from linux in the first place?
    I've read many things about how to print to windows, like
    http://www.idevelopment.info/data/U...tLinuxSMB.shtml
    http://www.redhat.com/docs/manuals/...mb-printer.html
    as well as many stuff from google search But there is no way I can solve my problem. I follow the instructions but still I can't print
    I also tried cups
    $ rpm -q cups
    cups-1.1.17-13
    But there too I faced the same proble.
    Can someone help me out here because I need that printer. I attach my smb.conf file. Any other information I will be standing by to submit.
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options (perhaps too
    # many!) most of which are not shown in this example
    # Any line which starts with a ; (semi-colon) or a # (hash)
    # is a comment and is ignored. In this example we will use a #
    # for commentry and a ; for parts of the config file that you
    # may wish to enable
    # NOTE: Whenever you modify this file you should run the command "testparm"
    # to check that you have not made any basic syntactic errors.
    #======================= Global Settings =====================================
    [global]
    # workgroup = NT-Domain-Name or Workgroup-Name
    workgroup = mshome
    # server string is the equivalent of the NT Description field
    server string = samba server
    # This option is important for security. It allows you to restrict
    # connections to machines which are on your local network. The
    # following example restricts access to two C class networks and
    # the "loopback" interface. For more examples of the syntax see
    # the smb.conf man page
    ; hosts allow = 192.168.1. 192.168.2. 127.
    # if you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    printcap name = /etc/printcap
    load printers = yes
    # It should not be necessary to spell out the print system type unless
    # yours is non-standard. Currently supported print systems include:
    # bsd, sysv, plp, lprng, aix, hpux, qnx, cups
    printing = cups
    # Uncomment this if you want a guest account, you must add this to /etc/passwd
    # otherwise the user "nobody" is used
    ; guest account = pcguest
    # this tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/%m.log
    # Put a capping on the size of the log files (in Kb).
    max log size = 0
    # Security mode. Most people will want user level security. See
    # security_level.txt for details.
    # Use password server option only with security = server
    # The argument list may include:
    # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
    # or to auto-locate the domain controller/s
    # password server = *
    ; password server = <NT-Server-Name>
    # Password Level allows matching of _n_ characters of the password for
    # all combinations of upper and lower case.
    ; password level = 8
    ; username level = 8
    # You may wish to use password encryption. Please read
    # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
    # Do not enable this option unless you have read those documents
    encrypt passwords = yes
    smb passwd file = /etc/samba/smbpasswd
    # The following is needed to keep smbclient from spouting spurious errors
    # when Samba is built with support for SSL.
    ; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt
    # The following are needed to allow password changing from Windows to
    # update the Linux system password also.
    # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
    # NOTE2: You do NOT need these to allow workstations to change only
    # the encrypted SMB passwords. They allow the Unix password
    # to be kept in sync with the SMB password.
    unix password sync = Yes
    passwd program = /usr/bin/passwd %u
    passwd chat = *New*password* %nn *Retype*new*password* %nn *passwd:*all*authentication*tokens*updated*successfully*
    # You can use PAM's password change control flag for Samba. If
    # enabled, then PAM will be used for password changes when requested
    # by an SMB client instead of the program listed in passwd program.
    # It should be possible to enable this without changing your passwd
    # chat parameter for most setups.
    pam password change = yes
    # Unix users can map to different SMB User names
    ; username map = /etc/samba/smbusers
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ; include = /etc/samba/smb.conf.%m
    # This parameter will control whether or not Samba should obey PAM's
    # account and session management directives. The default behavior is
    # to use PAM for clear text authentication only and to ignore any
    # account or session management. Note that Samba always ignores PAM
    # for authentication in the case of encrypt passwords = yes
    obey pam restrictions = yes
    # Most people will find that this option gives better performance.
    # See speed.txt and the manual pages for details
    socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
    # Configure Samba to use multiple interfaces
    # If you have multiple network interfaces then you must list them
    # here. See the man page for details.
    ; interfaces = 192.168.12.2/24 192.168.13.2/24
    # Configure remote browse list synchronisation here
    # request announcement to, or browse list sync from:
    # a specific host or from / to a whole subnet (see below)
    ; remote browse sync = 192.168.3.25 192.168.5.255
    # Cause this host to announce itself to local subnets here
    ; remote announce = 192.168.1.255 192.168.2.44
    # Browser Control Options:
    # set local master to no if you don't want Samba to become a master
    # browser on your network. Otherwise the normal election rules apply
    ; local master = no
    # OS Level determines the precedence of this server in master browser
    # elections. The default value should be reasonable
    ; os level = 33
    # Domain Master specifies Samba to be the Domain Master Browser. This
    # allows Samba to collate browse lists between subnets. Don't use this
    # if you already have a Windows NT domain controller doing this job
    ; domain master = yes
    # Preferred Master causes Samba to force a local browser election on startup
    # and gives it a slightly higher chance of winning the election
    ; preferred master = yes
    # Enable this if you want Samba to be a domain logon server for
    # Windows95 workstations.
    ; domain logons = yes
    # if you enable domain logons then you may want a per-machine or
    # per user logon script
    # run a specific logon batch file per workstation (machine)
    ; logon script = %m.bat
    # run a specific logon batch file per username
    ; logon script = %U.bat
    # Where to store roving profiles (only for Win95 and WinNT)
    # %L substitutes for this servers netbios name, %U is username
    # You must uncomment the [Profiles] share below
    ; logon path = \%LProfiles%U
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
    ; wins support = yes
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ; wins server = w.x.y.z
    # WINS Proxy - Tells Samba to answer name resolution queries on
    # behalf of a non WINS capable client, for this to work there must be
    # at least one WINS Server on the network. The default is NO.
    ; wins proxy = yes
    # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
    # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
    # this has been changed in version 1.9.18 to no.
    username map = /etc/samba/smbusers
    guest ok = yes
    guest account = axelman
    dns proxy = no
    # Case Preservation can be handy - system default is _no_
    # NOTE: These can be set on a per share basis
    ; preserve case = no
    ; short preserve case = no
    # Default case is normally upper case for all DOS files
    ; default case = lower
    # Be very careful with case sensitivity - it can break things!
    ; case sensitive = no
    #============================ Share Definitions ==============================
    [homes]
    comment = Home Directories
    browseable = no
    writeable = yes
    valid users = %S
    create mode = 0664
    directory mode = 0775
    # If you want users samba doesn't recognize to be mapped to a guest user
    ; map to guest = bad user
    # Un-comment the following and create the netlogon directory for Domain Logons
    ; [netlogon]
    ; comment = Network Logon Service
    ; path = /usr/local/samba/lib/netlogon
    ; guest ok = yes
    ; writable = no
    ; share modes = no
    # Un-comment the following to provide a specific roving profile share
    # the default is to use the user's home directory
    ;[Profiles]
    ; path = /usr/local/samba/profiles
    ; browseable = no
    ; guest ok = yes
    # NOTE: If you have a BSD-style print system there is no need to
    # specifically define each individual printer
    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    # Set public = yes to allow user 'guest account' to print
    printable = yes
    # This one is useful for people to share files
    ;[tmp]
    ; comment = Temporary file space
    ; path = /tmp/samba
    ; read only = no
    ; public = yes
    # A publicly accessible directory, but read only, except for people in
    # the "staff" group
    ;[public]
    ; comment = Public Stuff
    ; path = /home/samba
    ; public = yes
    ; writable = yes
    ; printable = no
    ; write list = @staff
    # Other examples.
    # A private printer, usable only by fred. Spool data will be placed in fred's
    # home directory. Note that fred must have write access to the spool directory,
    # wherever it is.
    ;[fredsprn]
    ; comment = Fred's Printer
    ; valid users = fred
    ; path = /home/fred
    ; printer = freds_printer
    ; public = no
    ; writable = no
    ; printable = yes
    # A private directory, usable only by fred. Note that fred requires write
    # access to the directory.
    ;[fredsdir]
    ; comment = Fred's Service
    ; path = /usr/somewhere/private
    ; valid users = fred
    ; public = no
    ; writable = yes
    ; printable = no
    # a service which has a different directory for each machine that connects
    # this allows you to tailor configurations to incoming machines. You could
    # also use the %U option to tailor it by user name.
    # The %m gets replaced with the machine name that is connecting.
    ;[pchome]
    ; comment = PC Directories
    ; path = /usr/local/pc/%m
    ; public = no
    ; writable = yes
    # A publicly accessible directory, read/write to all users. Note that all files
    # created in the directory by users will be owned by the default user, so
    # any user with access can delete any other user's files. Obviously this
    # directory must be writable by the default user. Another user could of course
    # be specified, in which case all files would be owned by that user instead.
    ;[public]
    ; path = /usr/somewhere/else/public
    ; public = yes
    ; only guest = yes
    ; writable = yes
    ; printable = no
    # The following two entries demonstrate how to share a directory so that two
    # users can place files there that will be owned by the specific users. In this
    # setup, the directory should be writable by both users and should have the
    # sticky bit set on it to prevent abuse. Obviously this could be extended to
    # as many users as required.
    ;[myshare]
    ; comment = Mary's and Fred's stuff
    ; path = /usr/somewhere/shared
    ; valid users = mary fred
    ; public = no
    ; writable = yes
    ; printable = no
    ; create mask = 0765
    [axelman]
    path = /home/axelman
    writeable = yes
    guest ok = yes
    thanx to all
    axelmang

    This easy to follow procedure (5 web pages with screen shots) worked for MacBook Pro 10.6.8 via Wireless-N to Windows 7 Home Premium SP1 x64 using USB Cable to HP Officejet 7210 All-in-One.  This configuration had worked with Windows XP.
    http://macs.about.com/od/printersharing/ss/Printer-Sharing-Share-Your-Windows-7- Printer-With-Your-Mac.htm
    Error messages encountered prior to using the above procedure:
    authorization required
    Backend returned status 2 (authentication required)
    Cannot find server
    Communication Failure: The computer is no longer able to communicate with your printer
    cupsdAuthorize: pam_authenticate() returned 9
    getaddrinfo: <windows printserver> nodename nor servname provided, or not known
    Job held for authentication
    On Hold (Authorization required)
    pam_authenticate() returned 9 (authentication error)!
    Printer Paused
    Printer stopped due to backend errors
    Session setup failed: NT_STATUS_INVALID_PARAMETER
    snmpInk: Unknown host (<windows printserver>)
    This computer seems to have a working Internet connection. but we cannot find "<windows printserver>" You may have typed the address incorrectly.
    Tree connect failed (NT_STATUS_ACCESS_DENIED)
    Unable to locate printer
    Unable to locate printer Unknown host
    Unknown host

Maybe you are looking for