Windows Xp Pro itunes help

whenever i close i tunes and re open it at a later time there is no content in it!! Please tell me what is wrong because its a real pain to transfer purchases and re subscibe to podcasts and stuff.
-its never done this before
-2nd gen ipod touch
-HELP-

The answers from four or five years ago still apply. There is no version of iTunes that supports the 64-bit version of Windows XP and never will be. If you search this forum for "XP 64"or do a web search for something like "iTunes Windows XP 64", you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete.
As to alternatives, there are third-party utilities such as MediaMonkey, Ephpod, or Xplay for handling the transfer. I haven't used any of these, so I can't make any recommendations. These applications cannot connect to the iTunes Store, so you will not be able to purchase content from the Store. The applications may also may not work with the most recent iPods, so confirm compatbility with your iPod model.
Regards.

Similar Messages

Windows 8 Pro - iTunes problems, please help!

Since I have installed Windows 8 Pro 32 bit, itunes has not worked at all? I keep getting error messages when installing and the it says I need to verifiy I have privilages to use 'Apple Moblie Device Support' I've tired run as admin. please help!

hello, i have a HP computer a pavillion g6 with a GPU Ati Radeon 6470M and windows 10 as operating system i tryed every single roubleshooting web site that speaks about this issue for now. in my opinion windows 10 isn't made for this kind of Graphic cards (by that i mean ATI mobility graphic cards)... for now !!!. a lot of people offer alternative solutions to the driver provided by the official AMD website, try this web site "http://leshcatlabs.net/". may be it'll work. but they didn't work for me, try them may be they could work for you if u happen to try windows 10. the thing is and my question is : Will there ever be any fix from HP (or microsoft, or AMD) for this issue ?. because it's not worth to wait if i will never use my graphic card on windows 10... i'm seriously thinking about downgrading back to windows 7 where every thing was stable over this issue. it's a temporary solution, but at least i can use my GPU. thx for answering, let's hope we all find a solution soon.

Itunes version 11 will not open with windows 8 pro, itunes version 11 will not open with windows 8 pro

I install the new itunes version 11 .The program will not open. What is the problem . I have windows 8 pro.

I can't even get it to install. The installation process stalls at a certain point and nothing happens. I try to cancel and that doesn't work either.

Installing Windows Xp Pro NEED HELP!!

I have a lenovo 3000 n200 0769 and it has no OS and the hdd is completely clean (it is ntfs formatted). When attempting to install windows xp pro the cd won't self boot (the drive is functioning properly as far as i know). Additionally, i get to the phoenix screen and it remains there. if im not quick to press the lenovo care button the notebook wont respond to anything. It does give me the options of pressing esc to resume normal startup, F1 to enter bios setup, F11 to diagnose hardware or recover system (which i have tried with the cd inserted but it only takes me to a black screen) and F12 to choose a temp startup device (which also takes me to a black screen) I am able to access the bios setup once the screen turns on by pressing esc then F1 if that helps anyone in aiding my efforts but other then that i can't do anything with the notebook. Could it be something wrong with the bios?
Message Edited by Twizz08 on 08-13-2008 03:05 PM

Hi !
On boot, press F1 just when the Lenovo logo shows. Navigate to the BIOS boot options and set the system to boot first on the CD device.
Save and exit BIOS. The system should boot on the CD.
If not check either the disk drive (faulty or not ? ) Bios passwd, try to have a USB stick (bootable with some software into it ) and try to boot from it (using F12) .
If nothing works, It may be the mainboard or something like that faulty....
I use a 0769 laptop with vista wiped out for Windows XP so it is feasible. (difficult as the disk is SATA and not IDE so you need a tweaked Win xp install CD)

ORA12154-Need urgent help on Windows XP Pro-PLEASE HELP!!!!

Hello
Iam having trouble in installing 10.1 g oracle on windows XP Pro box.
The installation goes fine and when it comes to step 3 of Database creation,
The installation screen throws this error:
ORA1-2154:TNS could not resolve the connect identifier specified.
I have not even completed the installation to look into files.
Anyway if I abort the installation,it finishes fine saying error on optional configuration
selected.
Now if I attempt to manually create the database using the database configuration assistant
that too throws the same error when it attempts to start oracle instance.
Here is the tnsnames.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ras268)(PORT = 1521))
Sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Any suggestion will be greatly appreciated.
Thanks
Sam

I think I hit this problem too, but's it been a while. I had to make the following change to the sqlnet.ora file.
#SQLNET.AUTHENTICATION_SERVICES= (NTS) -- PNosko 07/26/2005
SQLNET.AUTHENTICATION_SERVICES= (NONE)

Imac to macbook pro itunes help

I have and imac that i have my itunes on. i got a macbook pro and noy i cannot get my new music on my phone to go on my macbook pro itunes, it will only go on the imac. does anyone know how i can fix this?

Instead of using Migration Assistant, the best way is to use the Target Disk Mode, so you will save headaches (Migration Assistant creates a new user with the transferred data).
To do this, just connect both Macs with the Thunderbolt cable, and then, start the MacBook Pro holding the T key, so a Thunderbolt or FireWire icon should appear on the display. After that, go to the iMac, open Finder, and the hard drive of the MacBook Pro will appear on the Finder sidebar as an external drive, under "Devices". Just access to it, go to the folders with your iTunes and iPhoto libraries, and copy them to the iMac

Thankfully: Moving from Windows PC to Mac Book Pro - iTunes Help!

I recently got a MBP from work and I have previously had a Thinkpad that I was running iTunes (had all my music running from an External HD). I need to link my External HD up with iTunes on my new MBP, can you help me get this going. I have tried to "choose an iTunes Library" and tried to select the ITL file, but it is saying that it is locked for some reason.d

Use the instructions in this article to move the music to the MacBook Pro.
(11354)

IPod Touch not being recognised in Windows XP or iTunes - HELP!!!!!

Hi.
I have just bought a 16gb iPod Touch which I am trying to use on Windows XP.
When I connect the iPod to my PC it brings up the 'Found New Hardware Wizard' but does not open up iTunes.
On the Hardware Wizard it trys to search for the driver but cannot locate it, whenever it tries to search it comes back saying "The hardware was not installed because the wizard cannot locate the necessary software".
I have uninstalled iTunes, Apple Software Updater and Apple Mobile Device Support, and then reinstalled these with iTunes V7.5, but can't get anything to work so that my iPod comes up in iTunes.
If anyone can help it would be much appreciated!! Thanks.

Hi, sounds like me and CJ2000 are having exactly the same problem!
I've gone through all of the suggested fixes, and spent 78 minutes on the phone to Apple Care last night but still not working.
But, I just tried it with my friends PC and it worked fine, so its definitely a PC issue. What I noticed was that when I plugged it into the other PC it brought up a bubble saying "found new hardware", but then straight away found the USB Driver without needing the "Found New Hardware Wizard". iTunes then opened up automatically.
It seems that my PC seems to have problems locating the USB Driver for the Touch, any suggestions?
Thanks very much.

ITunes for Windows 7 Pro, iTunes not recognized

I recently had my Windows computer get a Crypto Locker virus and had to reset it to factory original. I installed iTunes to use with my iPhone 5 and I cannot sink my phone without the program warning me that my phone will be erased and the content replaced with iTunes content. The problem is my phone has a GREAT DEAL more music on it than is listed on my iTunes page. How can I download ALL my music from my phone back into the iTunes program?
Additionally, when I try to access the iTunes store from another program, such as QuickTime, my iTunes installation is not being recognized by QuickTime. It takes me to a page where I can download iTunes again. I have downloaded iTunes and used it to repair the program, and I have also uninstalled and reinstalled iTunes and it is still malfunctioning!
HELP!
Bob

ahhhhhh, many thanks for the link. for a while (about a year ago), Packard Bell UK was including those instructions on their troubleshooting pages, but then they went away. (or i just couldn't find where they'd been shifted to.)
usually nowadays i crank out the MS instructions instructions instead:
(MS) CD-ROM access is missing and messages cite error Code 31, Code 32, Code 19, Code 39, or Code 41 after you remove Easy CD Creator in Windows XP
... but it's a (slightly perverse) sort of comfort to know that i'm still recommending basically what Packard Bell recommends.

I'm running Windows XP Pro - iTunes won't start up unless I reboot my computer. What do I need to fix so it will run without having to reboot (rather than leaving computer in Stand By)?

.

Hi LZeitgeist,
please try the following, which works fine for me:
Start the taskmanager (Ctrl-Alt-Escape)
In taskmanager stop the process(tree) for APSDaemon.exe*32
In (file) explorer go to the folder under C:\Program Files (x86)\Common Files\Apple\Apple Application Support
Rename (or delete) the files
APSDaemon.exe
APSDaemon_main.dll
Close iTunes. If it doesn't react, kill it from the taskmanager.
Now iTunes should be working fine (again). If not:
Start Windows Control Panel, go to the section 'Uninstall a program'
Select iTunes with the right mouse button and choose 'Repair'
The above steps will have to be repeated usually after every iTunes update, provided that the new iTunes version starts to hang again...
Best of luck,
Michael

Windows Media vs iTunes - HELP!

Hi, while at uni, I have an old computer with windows 98, and thus cannot use itunes. I used Windows Media to upload a whole lot of music to my ipod, but it doesnt upload it as albums or anything - just each individual song, which are placed all over my music library.
I want to organise it properly, so I can actually find the song or album I want to listen to, and now that I am at home using windows XP, I assumed I could use itunes to do that.....however, the music is nowhere to be found when I use itunes - but it is all there if I connect the ipod to media. I accidentally loaded them on under contacts, and I cant get to that either on itunes.
How can I access this music?!
p.s. its a nano.

As a Windows Media Player fan...I too understand your pain. Here's the bottom line:
iTunes DOES NOT search your drives and update the library regularly. You have to do all updates manually!
I have 750 GBs of music so I can relate to your concerns and frustrations. The MAC file system is very "odd" in my opinion...the music folder is arranged by artist/sub-artist...so you can have MULTIPLE files for one artist...and even more frustrating...one album! How crazy is this? I rip all of my CDs using Windows Media Player because I TRULY HATE how iTunes arranges music! (Then I add the folder/file to iTunes after the rip). This way, I know I can find the song file again if I ever need to!
Anyway...for the last part of your post...are you trying to ADD the music files to your Mac or just a file path? If you're adding them...they'll go onto your computer in the iTunes format, thus your frustrations, sorry!
If you're just trying to play the music from a remote device...then the existing file structures should hold and I'm not sure why you're having problems.

Illustrator cs4 has stopped working on Windows 7 Pro. Help?

Has worked fine since first installed a few years ago. Suddenly stopped on 4/30/13. On trying to start the program, I get a window that wants me to agree to the License Agreement. This has also happened on InDesign CS4 and Fireworks CS4

Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium

I am using Windows 7 Pro, 64 bit on a brand new PC, and cannot connect to the iTunes store using iTunes version 10. HELP!!

Ok, so after purchasing a new computer, with windows 7 pro, 64 bit, I tried downloading the newest iTunes, which at the time was 10.2.1 (i believe). After installation, everything seemed to work, except that iTunes was unable to securely connect to the internet, use home sharing, or validate my computer.
As troubleshooting, I first ran msconfig, and then turned OFF all programs that boot at start up EXCEPT itunes and quicktime. After a restart, i opened itunes again, and got the same result. That led me to believe that iTunes was NOT being blocked by another program on my machine. I am currently running itunes 10.7 successfully on a Windows 7 32 machine at work. Anyhow, for grins, I tried to install version 9 on the new computer, and it installed perfectly, and immediately connected to the itunes store, leading me to believe that there is nothing wrong with my software configuration (not sure if this is a safe assumption or not). I then tried to let iTunes update itself using the automated update function. It tried to update itself to the most current version, then 10.6. Again, iTunes was unable to connect to the iTunes store. I HAVE tried disabling the anti-virus software (AVG), but that made no difference.
I have since gone back and reinstalled iTunes 9. Here's the catch though. When I reinstalled using version 9, I had to redo all my library files. I'm about 1/2 way through my CD's, and now have a substantial library file going. The last time I let iTunes update itself to 10.6, once I realized that it was not going to connect to the store, I uninstalled iTunes, and reinstalled ver. 9. However, when I did this, it told me it could no longer open the library file, because it was a newer .itl or .xml (i believe it was one of those two extensions) library file. At that point, I basically started everything over again, using version 9, and have been importing CD's like a madman at night.
Here are my questions:
1) Is there a way to make a copy of the files that store my library info, so that if my upgrade to ver 10 IS NOT SUCCESSFUL, I can restore ver 9, but still have all of the album art work, playlists (when I import music, I create a playlist with the artists' name, and store things that way), etc. in tact?
2) What else can I try (firewall settings, internet options, etc.) to try and get version to to successfully install? I would really like to get all the benfits of the newer versions.
3) When I tried to get apple tech support before, they wanted me to pay a ridiculous 69$ fee for phone support. I just bought an iphone 5....this should entitle me to a fresh 90 days of phone support, right? The reason I ask here is that I could hardly understand the "tech" that answered the phone when I called for tech support last time, and to be honest, it really ****** me off that they wanted to try and milk me for another 69 bucks....I've purchased every iPhone since the 3Gs came out (pre-ordered at that), and have nearly gone broke purchasing music from their iTunes store....heck, maybe they're doing me me a favor not letting me into the store, huh?
Any help or ideas would be greatly appreciated,
-Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I have Windows 8 pro on my computer . I un-installed itunes on my computer to re-install itunes 7.1.1 Now the system will not allow the re-install. Can anyone help?

I have Windows 8 pro on my computer . I un-installed itunes on my computer to re-install itunes 7.1.1 Now the system will not allow the re-install. Can anyone help?

I have an HP Officejet Pro 7580 similar to the 8600 you have and after upgrading to Mountain Lion it wouldn't work. HP support site said download updates for Mountain Lion from App Store not their site so I went to software update but there were NO UPDATES FOR 10.8. Tried a million things and could not get printer to work. So I restored back to Lion figuring at least printer worked then only now I can't get it to work with old settings either. I am sick to death of claims by Apple and peripheral manufacturers that everything is compatible all you have to do is get updates well in this case THERE ARE NONE TO BE GOT and I don't have time to **** about trying to find 'work arounds'. There shouldnt be a need for work-arounds. Unless the updates are ready DONT release the new OS. You shouldn't have to be an IT tech to make basic things like printing work. I see also the HP 8600 is even sold by appstore so there is no reason why it shouldn't work with minimum fuss.

HELP - cant install itunes in my pc windows xp pro

i can't install itunes on my laptop - i've got an administrator account, but the itunes software that came with my ipod doesn't complete installation - error msg: 1607: Unable to install InstallShield Scripting Runtime.
is there any other way or software to install... i just need to transfer files between my pc and ipod.
can anyone help me?
pc Windows XP Pro

Let's start with this common recommendation...
tips on fixing 1607 error

Windows Xp Pro itunes help

Similar Messages

Maybe you are looking for