Windows XP Pro: Service Pack 3 Issue

Hope I can get some help on this one...I just set up bootcamp and installed Windows XP Pro (Version 2002) and all went well. I go to put in my leopard disc to install the drivers, and after a minute of being in the drive, it ejects the CD. I tried to download the drivers and put them on an external HD but windows doesnt have the boot.exe to open it.
Now heres the kicker. I was having issues with my MBP and a good friend of mine offered to clean install and fix the computer for a monetary fee. He did so, and installed Snow Leopard for me (I had Leopard before). I was never given the CD by my friend, so I was using my roomies to install the drivers. Is this whats causing the problem since its not the CD registered to my comp?
Any help would be awesome! Thanks guys!

Did you completely remove all Apple related software from your system and re-installing it from scratch using the exact instructions in this Apple support document?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
B-rock

Similar Messages

  • OracleXE on Windows XP Pro Service Pack 1

    Hi there,
    I downloaded, set, and ran OracleXE on single computer. I wasn't able to set CL8MSWIN1251. I hope in production version that will be OK.
    Moreover, I succeed to run it on a small LAN of two computers with Windows XP Pro. Unfortunately, I couldn't find any Apache, DAD (marvel.conf), etc. configuration files! They are very useful for setting and troubleshooting.
    I am in trouble to run Oracle 10g, HTTP, and HTML DB 2.0 on same configuration in LAN. EmAgent is down, DB console is stopped, and I must disable the network adapter and restart the computer. Then when connect to the HTML DB or my application everything is OK. I can work from both computers. If somebody managed to run similar configuration, please sent me an email?
    That is the reason for me to be reserved in future use of OracleXE.
    I am looking for more information, testing results, and capabilities of OracleXE on small LAN and different Windows platforms.
    Thank you!

    XE doesnt use Apache / DAD's it is all stored in the XMLDB, you can access it using webdave if you want (open http://xxx:8080/ as a webfolder)

  • Forms 10g Installation issue on windows 7 Professional service pack 1

    hi
    I am trying to install oracle forms 10g  64 bit windows 7 Professional service pack 1 ..
    Below are 2 files that i am using ..
    ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
    ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
    But it failed but the error is .. 
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.    Actual 6.1     Failed <<<<
    just wondering if there are any workaround ..

    Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7.  You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified.  You must have a My Oracle Support account to obtain the patch.
    Now, to your question - is there a workaround; the answer is yes.  There are known issues with this installer.  I'll list them and their workaround.
    1.  The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
    Workaround:  Right-click the Installer and select Properties.  Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for:  Windows XP SP3).
    2.  The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
    Workaround:  You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes.  See this Microsoft article for more information on changing VM settings.  http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
    This change will require you to restart your computer.  After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
    3.  The Oracle installer MUST be installed as an "Administrator". 
    Workaround:  Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab.  Click the "Run this program as an administrator" checkbox.
    4.  Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
    Run the Oracle installer and it should now install succesfully.
    Craig...

  • Having problems downloading itunes 10.5.2; box states windows installer issue. I have a 2005 with windows XP and service pack 2. Any ideas?

    Just bought a new ipod touch for my daughter.  It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.)  When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer.  I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help.  Any suggestion?

    Hi Lorheak,
    thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
    Greetings Gert

  • ORADC problem on Windows 2000 with Service pack 1 and service pack 2

    Hi,
    I have a VB application running on NT4.0 workstations. It uses
    ORADC control to talk to ORACLE 7.3 When I load it on Windows
    2000 with service pack 1 or service pack 2, I encounter some
    problems.
    The ORADC control is used in most of the VB forms and the
    Refresh method of the ORADC conrol is used to refresh the APEX
    TRUE DBGRID PRO control. When this action is executed, I receive
    a run time error
    "Method Refresh of object '_DORADC' failed Err#: -2147417848
    It works fine when no service pack is applied on Win2K.
    Can anyone tell me what's going on?
    Thanks

    satheesh_p wrote:
    Thanks for your reply.
    When I checked the system requirements. I couldn't find information on windows 2003 service pack 2
    link http://www.adobe.com/products/coldfusion/systemreqs/.
    Whether your OS is windows 2003 with service pack 2?
    Are you sure coldfusion 8 will work on windows 2003 with service pack 2?
    Regards,
    Satheesh.
    Well it was there, if you understand the naming properly:
    ColdFusion 8 system requirements
            Windows
    Intel® Pentium® II or AMD Athlon processor
    Microsoft®
    Windows® 2000 Professional with Service Pack 3; Windows 2000 Server,
    Advanced Server, or Datacenter Server with Service Pack 3; Windows
    Server® 2003 Web, Standard, or Enterprise Edition with Service Pack 1
    and R2; Windows Server® 2008; Windows XP Professional or Home Edition;
    or Windows Vista®
    R2 is the "offical" Microsoft name for service pack 2.

  • HT1925 I cannot uninstall Bonjour and Quicktime so I can do a complete reinstall of iTunes.  I get an error message stating that both are older versions and to contact technical support.  I am running Windows XP Professional Service Pack 3.

    I am trying to update iTunes on my desktop (running Windows XP Professional Service Pack 3) and I continue to receive an error message stating that the update cannot continue because Bonjour and Quicktime are older versions and to contact technical support.  I have tried repairing both and tried to uninstall iTunes and all of it's componants and still receive the same message.  Any help getting this issue resolved as soon as possible will be much appreciated.   

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    Next, select any QuickTime entries and click "Remove", as per the following screenshot: 
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I downloaded the iCloud app to my PC (Windows Vista with Service Pack 2).  But now why I launch the aplication, i'm getting an arror message that says "Unable to launch app due to side-by-side comparison".  What do I need to do?

    I downloaded the iCloud app to my PC (Windows Vista with Service Pack 2).  But when I try to launch the app from the start menu, I'm getting an error message that says "Unable to launch due to side-by-side configuration".  What do I need to do?

    Sounds like a Windows issue.  Google the error message.  There are several discussions on the Microsoft forums listed that may help.

  • ICloud says there is server error when I try sign in on Windows Vista x32 service pack 2. Can't set it up on my PC any ideas?

    iCloud says "you can't sing in because of a server error" running Windows Vista x32 service pack 2. Can't set it up on my PC any ideas?

    I have used the solution below to fix mine and others that have run into this issue.
    Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
    then type in:  "Netsh winsock reset"  (-without the quotes-)
    Hit enter, restart PC, iCloud For PC should now connect without any server errors
    (This solutions will work in some instances when trying to fix errors associated when you are unable to connect to iTunes also.)

  • Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03

    Hi Experts,
    A customer wants to know if there Are any known issues with applying Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03 .
    i gave him the answer that SP2 is not tested for that version hence it is not supprted. So he now asks me if Windows 2003 Server Service Pack 1 is supported for 4.0.1.0.03 , Any input would be of great help.

    Hi,
    Be careful when you say SP2 is not supported.
    Hyperion s policy in terms of third party products was the following (I would imagine this should remain the same with Oracle, however you may want to check with your local support team):
    Hyperion products are tested against the versions specified in the product matrices. They do not actively look for issues in maintenance releases or service pack upgrades from 3rd party vendors for obvious reasons (there would be far too many). They will investigate any maintenance release or service pack upgrades as long as the vendor confirms backward compatibility.
    Therefore SP2 would be supported with 4.0.1 and Hyperion/Oracle should investigate any issues you may encounter.
    However keep in mind that if a specific issue you have encountered in 4.0.1 is caused by SP2 but fixed in a later version then Oracle's recommendation will be to upgrade.
    So its a catch 22 situation really.
    Personally I would take this opportunity to recommend an upgrade to 9.3.1 ;-)
    Hope this helps.
    Seb

  • Microsoft Windows XP Professional Service Pack 3 (Build 2600) To Be Filled By O.E.M. To Be Filled By O.E.M. iTunes 11.0.0.163 QuickTime 7.1 FairPlay 2.2.32 Apple Application Support 2.3.2 iPod 更新程序库 10.0d2 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mob

    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    To Be Filled By O.E.M. To Be Filled By O.E.M.
    iTunes 11.0.0.163
    QuickTime 7.1
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod 更新程序库 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver 1.63.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote 提交“1.9.6.143”
    Gracenote DSP 1.9.6.45
    iTunes 序列号 0012B96815A8CF58
    当前用户是管理员。
    当前的本地日期与时间是：2002-01-17 20:57:39。
    iTunes 并未在安全模式下运行。
    WebKit 加速合成已启用。
    不支持 HDCP。
    支持 Core Media。
    视频显示信息
    NVIDIA GeForce 6150SE nForce 430
    **** 外部插件信息 ****
    尚未安装外置插件。
    **** 网络连接测试 ****
    网络适配器信息
    适配器名称：          {E6238474-0F0E-4882-A736-658EEE96DF63}
    描述：          Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC - 数据包计划程序微型端口
    IP 地址：          192.168.1.100
    子网掩码：          255.255.255.0
    默认网关：          192.168.1.1
    DHCP 已启用：          是
    DHCP 服务器：          192.168.1.1
    获得租约的时间：          Thu Jan 17 20:07:17 2002
    租约到期时间：          Thu Jan 17 22:07:17 2002
    DNS 服务器：          222.88.88.88
                        222.85.85.85
    活动的连接：          LAN 连接
    已连接：          是
    在线：                    是
    使用调制解调器：          否
    使用 LAN：          是
    使用代理：          否
    防火墙信息
    成功连接到 Apple 网站。
    连接失败，无法浏览 iTunes Store。
    发生未知错误（0x800B0101）。
    连接失败，无法从 iTunes Store 购物。
    发生未知错误（0x800B0101）。
    无法连接到 iPhone 激活服务器。
    发生未知错误（0x800B0101）。
    无法连接到固件更新服务器。
    发生未知错误（0x800B0101）。
    成功连接到 Gracenote 服务器。
    上次成功访问 iTunes Store 是在：2013-01-04 12:38:48。
    这台电脑上的日期与时间的设置不正确。与 iTunes Store 的安全连接可能会失败。
    **** CD/DVD 驱动器测试 ****
    “LowerFilters”中没有驱动程序。
    UpperFilters: GEARAspiWDM (2.2.3.0),
    G: ASUS DVD-E818A4, Rev 1.00
    驱动器是空的。
    **** 设备连通性测试 ****
    iPodService 11.0.0.163当前正在运行。
    iTunesHelper 11.0.0.163当前正在运行。
    Apple Mobile Device service 3.3.0.0当前正在运行。
    通用串行总线控制器：
    Standard OpenHCD USB Host Controller.  设备工作正常。
    Standard Enhanced PCI to USB Host Controller.  设备工作正常。
    找不到 FireWire (IEEE 1394) 主机控制器。
    已连接的设备的信息：
    小C, iPhone 4 (GSM)正在运行固件版本 6.0.1
    序列号：          DX6JLS8HDP0N
    **** 设备同步测试 ****
    成功完成同步测试。

    i cant access to itunes store
    Can you walk us through what happens when you try to connect to the Store, please?

  • TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1.  Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

    Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1).  I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly.  Do you want iTunes to try to repair this for you?  I normally respond with OK and it immediately tells me "could not be repaired.  Please reinstall iTunes..."  I have done this a number of times to no avail.

    I also notice Quicktime is not getting installed at all.
    That one is normal nowadays (ever since the iTunes versions 10.5.x).
    The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

    I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

    What is the exact error message?

  • I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12  file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    Change browsers. See what happens.
    Be well...

  • Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I am able to add music or apps to my library but not just videos. Please help.

    Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I own ipad mini. I am able to add music or apps to my library but not just videos. I have already tried removing & reinstalling it. I also have tried with various formats like MPEG, MOV, MP4. Please help.

    I already have what you ( ClayandLonnie ) have suggested with the preferences>Shareing Preferences set to share all.
    I have tried turing it off, and then back on.
    I have tried just sharing specific items and this still did not work.
    I am going to try stepping back down to 11.04.4 as previously suggested by TheDarkCanuck when I get home tomorrow. (maybe saturday).  I am just leary about having to recreate all my libraries and how long that might take.  I have over 1.5 TB of Music and Video, that is why I would like to get it working in the current version.
    Just because I don't have a Mac, it seems that this is not being taken as a real problem for the windows 7 users (maybe it is specific to 64bit).  I may try the 32bit version to see if that fixes it first.  Unless someone else has, and want to chime in.

  • Weblogic 5.1 Service Pack 9 Issue

    Hi, I install weblogic5.1 with service pack 9 on Solaris. However, when I start the weblogic server, the following appears during startup even though the server is started successfully:-[ExternalEntity] : Could not resolve entity '-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN'. Check your dtd reference.Can anyone tell me what is wrong?

    You must be registered at WebSupport to download service packs
    Regards from Mexico
    Sergio Ríos
    [email protected] (Jean-Michel Gautreau) wrote:
    Hi folks!
    Where can I download Weblogic 5.1 Service Pack 9 Issue, I can't see
    any link to download it on BEA's website. There is only a link to
    download BEA WebLogic 5.1 WITH SP9... I just need the SP9!!!
    Thanks for your help.

Maybe you are looking for