Windows xp pro // tryin to install oracle 10.1.2.0 login into oralce ;

Hi:
I am trying to login to oracle but get the error ora 12154 tns error. Can anyone help me please. I got the tnsname sales from tje tnsnames.ora file but when I used to configure the net configuration assisstant it did not work for me. I would not pass the test when I tested it. Can anyone help.

Windows? Go to control panel, Administration Tasks, Services and look for the Oracle services. If up, then let us know. If not up, bring them up and report any problem.
This stuff is discussed in the 2-day DBA manual. Please take the time to read it.

Similar Messages

Windows XP-Pro will not install on my new P965 Platinum

I hope someone can help me with my problem.
It seems that everytime i try to install Windows XP-Pro after the initial
drivers setup i get this Error Message:
A problem has been detected and windows has been shut down to prevent
damage to your computer.
If this is the first time you've seen this stop error screen, restart
your computer. If this screen appears again, Follow these steps:
Check to be sure you have adequate disk space. If a driver is identified
in the stop message, disable the driver or check with the manufacturer
for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS
Memory option such as caching or shadowing. If you need to use Safe Mode
to remove or disable components, restart your computer and press F8 to
select Advance Start up options, and then select Safe Mode.
Technical Information:
*** STOP: 0x0000007E (0xc0000005, 0xF78350BF,0xF7C81208,0xF7C80F08)
*** PCI. sys-address F8350BF base at F782E000, Datestamp 3b7d855c
This is a new build with a Samsung Spinpoint SP2504C SATAII Drive but
when this occurred i thought that it might be the drive that was the
problem.So i therefore put it i my Old PC and tried to install Windows
XP-Pro onto it which i did with no problems at all.
I then put the drive back in my New PC where it Booted Up First Time and
runs OK and i have even installed Software onto it.In fact i am using at
this very minute as i type.
Unfortunately when i still try to Reinstall Windows XP-Pro on my New Build
with my P965 i get the same Error Message as above.
Can anybody please help.
Thanks
P965 Platinum
Intel Core 2 Duo E6300
Samsung Spinpoint SP2504C SATAII
Corsair 1GB DDR2 Twin2X(5x512MB)
inno3D GeForce 7600GT
Creative Sound Blaster X-Fi Extreme Music Sound Card
NEC ND-3520 DVD
Arctic Cooling Freezer 7 Pro
Thermaltake Toughpower 600W
Thermaltake Tsunami Dream Case

Quote
I hope you don't mind me asking this question for Jack the Newbie.
You say i have to use a Windows XP-Pro Install-CD that includes SP2 as well as the JMicron driver for the JMicron IDE-Port which i have my Optical Drive connected to.I know this is telling me how to fix my problem, but what i would also like to know is WHY do i have to install it with SP2 & the JMicron driver like this on my P965 when it installed on my old pc with just the XP-Pro Install-CD.
Your Windows Installation CD should be as up to date as possible, especially for newer hardware. SP1 is from 2002, SP2 was released in 2004. Neither SP1 nor SP2 install CDs provide the proper drivers for the JMicron chipset used on your mainboard. I cannot give a detailed list about the differences between SP1 and SP2. I just know, that there are a lot of problems when people do not use SP2 on Intel 975/965 Chipset-boards which where released in 2006.
When you say that your installation works fine on your old PC I believe you. It worked on my old Laptop too. However I was not able to install XP Pro on my 975X-board without SP2 at all until I upgraded my Installation CD.
Quote
Garfield,
I had exactly the same problem--because I had my optical drive hooked up to a Promise IDE controller, rather than to a mobo IDE connection. Turns out the Promise will read and write the optical drives OK, just won't boot from them properly. And, somehow, that affects Windows Setup.
I don't know anything about the JMicron and the need for SP2. But, as you can see from my sig, I'm using XP Pro SP1, and once I moved my NEC 3500 back to the mobo IDE (as secondary behind my IDE hard disk) everything worked like a champ.
Just my $.02.
Stahlwird
To relate Garfields problem with your solution is a mistake. Your board does not use any JMicron hardware, has NVidia chipset instead of Intel and an AMD CPU. Your are talking about a totally different Setup here.

Windows 7 Pro will not install on iMac after HD replacement.

I have a late 2009 iMac on which I have OS X 10.8 Mountain Lion and ran Windows 7 Professional in Bootcamp. My iMac wound up having a defective hard drive which was just replaced last week under warranty. The problem is now I am unable to install Windows 7 in Bootcamp. I use the Bootcamp assist to partition the HD, it goes through the motions of installing Windoes 7 but at a certain point after 2 reboots and just before it would say Windows is setting up your computer for first use the screen goes black and nothing happens. The iMac is still turned on because if I hold the power button down I hear it shut off. When I turn it back on I can see that Windows was not fully installed.I tried to see what it says running in safe mode, and then I can see that it wants to continue setting Windows up but I get a message that Windows cannot be installed in Safe Mode, and I should reboot but then I get the black screen again. I've tried to repair the installation but to no avail. I've done this using both 32 bit and 64 bit with full disc of Windows 7 Professional but neither work.
Does anyone have any idea what could be wrong and what I can do to rectify this problem? Thanks in advance for any help.

Quote
I hope you don't mind me asking this question for Jack the Newbie.
You say i have to use a Windows XP-Pro Install-CD that includes SP2 as well as the JMicron driver for the JMicron IDE-Port which i have my Optical Drive connected to.I know this is telling me how to fix my problem, but what i would also like to know is WHY do i have to install it with SP2 & the JMicron driver like this on my P965 when it installed on my old pc with just the XP-Pro Install-CD.
Your Windows Installation CD should be as up to date as possible, especially for newer hardware. SP1 is from 2002, SP2 was released in 2004. Neither SP1 nor SP2 install CDs provide the proper drivers for the JMicron chipset used on your mainboard. I cannot give a detailed list about the differences between SP1 and SP2. I just know, that there are a lot of problems when people do not use SP2 on Intel 975/965 Chipset-boards which where released in 2006.
When you say that your installation works fine on your old PC I believe you. It worked on my old Laptop too. However I was not able to install XP Pro on my 975X-board without SP2 at all until I upgraded my Installation CD.
Quote
Garfield,
I had exactly the same problem--because I had my optical drive hooked up to a Promise IDE controller, rather than to a mobo IDE connection. Turns out the Promise will read and write the optical drives OK, just won't boot from them properly. And, somehow, that affects Windows Setup.
I don't know anything about the JMicron and the need for SP2. But, as you can see from my sig, I'm using XP Pro SP1, and once I moved my NEC 3500 back to the mobo IDE (as secondary behind my IDE hard disk) everything worked like a champ.
Just my $.02.
Stahlwird
To relate Garfields problem with your solution is a mistake. Your board does not use any JMicron hardware, has NVidia chipset instead of Intel and an AMD CPU. Your are talking about a totally different Setup here.

Ideapad A720 Windows 8 Pro can't install the bluetooth driver

I upgraded to Windows 8 than went to the Lenovo site and down loaded a few of the drivers that it needs (primarily the NVIDIA video driver), however Windows 8 forced me to uninstall the Bluetooth driver before doing the upgrade.
Downloading the Bluetooth A720 Windows 8 driver from the support site doesn't seem to work. You run the install, it unpacks than dies and does run. trying to force the setup to run from the driver folder throws an error saying I am missing the blue tooth license.
Any guess here? everything else seems to be work on Windows 8 great, multi-touch 27" is gorgeous just opening bing.com is a cool experience.

Hi,
Have you tried these command to uninstall and reinstall the right key?
slmgr.vbs /upk
slmgr.vbs -ipk YOUR-ACTIVATION-KEY-HERE
slmgr.vbs -ato
As I known, during clean installation of Windows 8 pro, we need to enter the product key.
What kind of Windows 8 pro did you try to install on your Windows 8 PC? Is this just a pro package? or full version?
Kate Li
TechNet Community Support

Windows 8 Pro, can't install

Hi,
We bought a new laptop, Asus N750JV, Which has a Windows 8 Home. We do have a pro license to install on it.
I took the DVD, installed and it didn't asked the key. After installation, windows is getting activated as a Home, can't get rid of it, I just can't get my pro key working.
Anyone already had this issue? I do think it's related to the BIOS, which have a home product ID I guess...
Thanks for any help!

Hi,
Have you tried these command to uninstall and reinstall the right key?
slmgr.vbs /upk
slmgr.vbs -ipk YOUR-ACTIVATION-KEY-HERE
slmgr.vbs -ato
As I known, during clean installation of Windows 8 pro, we need to enter the product key.
What kind of Windows 8 pro did you try to install on your Windows 8 PC? Is this just a pro package? or full version?
Kate Li
TechNet Community Support

Photoshop tools dont respond after Windows 7 pro 64 bit installed

     I have the Abobe creative suite CS4 web premium student edition and I have recently upgraded to the Windows 7 professional 64 bit OS. Some of my tools in each program do not respond to clicks. In the Photoshop program my cursor in each tool is broken apart and I see 3 of the object such as an arrow or hand. Very difficult to fine tune anything. This is just one of the issues of many.
     I have tried to RESET the settings file by holding CTRL-SHIFT-ALT on startup and it had no effect. I've tried reinstalling my display drivers, upgrading my display and motherboard drivers from NVIDIA, formatting the Hard drive and reinstalling my operating system, and lastly I have tried reinstalling my Adobe Collection.
     I've run out of answers and need help.

Please post your query in the Photoshop forum.

Apple Mobile Device Support fails to install on Windows XP Pro SP2

I have a dualboot between my Vista and my XP, my itunes on Vista works great and can connect with my ipod touch (2.1) but on my XP the installation of AMDS fails. Tried completly re-installing all services, i searched the internet for possible solutions but it seems i'm the only one having problems with windows XP, all the other similar problems are on Vista.
I know it's AMDS that fails because i unpacked the .exe file and ran all the installers one by one, they all work except AMDS (i get a rollback feature). I downloaded it with 3 different browsers from the official apple site and to eliminate that it's my hard drive that gives errors i also did a CHKDSK.
Also, it's not my ipod either, it can connect to my Vista and other computers with windows XP.
All the latest drivers are installed and during the installation no CD/USB was inserted except my mouse, i even tried it with the CD tray open (sometimes helps). Safe mode also doesn't work
I have no idea what's wrong. Could anyone help me out?

Hi,
good news: You're not the only one with this problem. Bad news: I don't have a solution either. To restrict possible answers here is what I did so far:
- computer was set up brand new with Windows XP Pro SP2
- iTunes installed, AMDS didn't, everything deleted after this, nothing (no iTunes, no Quicktime, no Apple updater) left on computer
- disconnected laptop from network, switched off firewall, switched off virus scan
- ran install package for AMDS only, as Johan described, install won't finish, files are first copied then everything gets rolled back (and no log found). This means the service is not existing, so the problem is NOT solved by going into services and switch it on ...
ANYONE PLEEEASE?
Cheers & thanks

How to install oracle Forms and Report 10g in windows XP OS

How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
It is working good.
please help me this issue.
please give the steps..............
Thanks
Rajeev

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

Unable to install Windows XP Pro into Parallels

When I try to open a new VM and install windows XP Pro using my install CD, I understand to click on the right arrow to start the VM. However, when I do that, rather than read the CD and install the software, it makes me (requires) reboot the iMac. I'm a new user of iMac so there may be something I'm not doing. Maybe something in the setup of the VM.
When I reboot, I have to start all over with a new VM and the same thing happens. I have software related to Diabetes control which I must use (keeps track of glucose levels) and need to run this stuff.
Can anyone help???
iMac Mac OS X (10.4.7)

I had the same problem - although the Parallels auto update may tell you that your copy is up-to-date, you still need to go to their site & download "Build 1884". Once that's done also make sure before starting the VM that the boot sequence is set to begin with CD before you install Windows. After installation reset it to begin with Hard Drive.

Install Oracle eBusiness 12 on Oracle Linux 5.7

Hi All,
My name is John and I have some questions in relation to the installation of Oracle eBusiness 12 on Oracle Linusx 5.7 64bit. Here is what I've done so far:
- I installed Window 7 on my Macbook Pro Retina Display using Boot camp.
- I installed VMware Player 5.00 on the Window 7 host.
- I installed Oracle Linux 5.7 64bit Guest in the VMware Player 5.00
- I performed 'yum update' on the Oracle Linux 5.7 Guest
- When I ran 'uname -r' it returned '2.6.32-300.39.1.el5uek'
- I updated the latest Rapid Install patch as described in Oracle Applications Release Notes, Release 12.1.1 (My Oracle Support Document 798258.1) and now the RapidWizVersion returned is 12.1.1.13.
My question is in Moc 761566.1, it stated that the following packages must be installed from the Oracle Linux 5 or RHEL 5 distribution media on both application and database tiers:
•gcc-4.1.2-14.el5.x86_64
•gcc-c++-4.1.2-14.el5.x86_64
•glibc-2.5-18.i686 (32-bit)
•glibc-2.5-18.x86_64
•glibc-common-2.5-18.x86_64
•glibc-devel-2.5-18.i386 (32-bit)
•glibc-devel-2.5-18.x86_64
•libgcc-4.1.2-14.el5.i386
•libgcc-4.1.2-14.el5.x86_64
•libstdc++-devel-4.1.2-14.el5.i386
•libstdc++-devel-4.1.2-14.el5.x86_64
•libstdc++-4.1.2-14.el5.i386
•libstdc++-4.1.2-14.el5.x86_64
•libXi-1.0.1-3.1.i386
•libXp-1.0.0-8.1.el5.i386
•libXp-1.0.0-8.1.el5.x86_64
•libaio-0.3.106-3.2.i386
•libaio-0.3.106-3.2.x86_64
•libgomp-4.1.2-14.el5.x86_64
•make-3.81-1.1.x86_64
•gdbm-1.8.0-26.2.1.i386
•gdbm-1.8.0-26.2.1.x86_64
•sysstat-7.0.0-3.el5.x86_64
•util-linux-2.13-0.45.el5.x86_64
•compat-libstdc++-296-2.96-138.i386
•compat-libstdc++-33-3.2.3-61.i386
Since I'm not a Linux guru so I just ran a 'rpm -qa > all_rpm.txt' and open that output file and find whether I have all of those above installed rpms before installing Oracle eBusiness Suite.
First, I discovered that I do not have any 'gcc-c++-4.1.2-14.el5.x86_64' rpm installed on my Linux 5.7 64 bit guest system. Could you please advise how do I install this particular rpm because I thought after running the 'yum update' command, it would already have installed this rpm (gcc-c++-4.1.2-14.el5.x86_64) for me.
Also, is there any 'pre-test' that I can carry out to ensure that the Oracle eBusiness installation would be successful. Because in the past, I have attempted to install Oracle eBusiness twice but on both occasions, they have failed miserably with the Linux just hung and I have to perform the whole process again. Thank you for your assistance as I really want to have it installed on my Mac Book Pro successfully.
Regards,
John

Hi Hussein,
Thank you for the quick reply but here were that results when I followed your suggestion and I believe none of three have worked successfully and can you advise what I've done wrong or what I've forgotten to do, thank you for your assistance.
1.) After I executed 'yum install gcc-c++-*'
yum install gcc-c++-*
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (111, 'Connection refused')>
Trying other mirror.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package gcc-c++.x86_64 0:4.1.2-52.el5_8.1 set to be updated
--> Processing Dependency: libstdc++-devel = 4.1.2-52.el5_8.1 for package: gcc-c++
--> Running transaction check
---> Package libstdc++-devel.x86_64 0:4.1.2-52.el5_8.1 set to be updated
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/filelists.xml.gz: [Errno 4] IOError: <urlopen error (110, 'Connection timed out')>
Trying other mirror.
Error: failure: repodata/filelists.xml.gz from el5_latest: [Errno 256] No more mirrors to try.
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va nofiles nodigest
The program package-cleanup is found in the yum-utils package.
2.) After I executed 'yum install gcc-c*'
yum install gcc-c*
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (110, 'Connection timed out')>
Trying other mirror.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package gcc-c++.x86_64 0:4.1.2-52.el5_8.1 set to be updated
--> Processing Dependency: libstdc++-devel = 4.1.2-52.el5_8.1 for package: gcc-c++
--> Running transaction check
---> Package libstdc++-devel.x86_64 0:4.1.2-52.el5_8.1 set to be updated
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/filelists.xml.gz: [Errno 4] IOError: <urlopen error (110, 'Connection timed out')>
Trying other mirror.
Error: failure: repodata/filelists.xml.gz from el5_latest: [Errno 256] No more mirrors to try.
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va nofiles nodigest
The program package-cleanup is found in the yum-utils package.
3.) After I executed 'yum install gcc-c++-4.1.2-14.el5.x86_64'
yum install gcc-c++-4.1.2-14.el5.x86_64
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
http://public-yum.oracle.com/repo/OracleLinux/OL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (110, 'Connection timed out')>
Trying other mirror.
Setting up Install Process
No package gcc-c++-4.1.2-14.el5.x86_64 available.
Nothing to do
Regards,
John

How do I get firefox to display images clearly? I've got Windows 2000 Pro and Firefox 3.6.6. Internet Explorer shows images clearly, so I'm sure I have the correct graphics driver. Do I need a plugin or add-on of some sort? When I go to "updates", it

When I use Firefox the images and logos don't show up clearly/correctly. I'm using Windows 2000 Pro. and just installed Firefox 3.6.6. I'm sure I have the right graphics driver as I'm able to see the images and logos clearly in Internet Explorer. I only have the "default plugin 1.0.0.15" installed. I'm thinking that I'm missing a plugin or add-on of some sort, but I'm not sure which one(s). When I go to "updates" it says there were no updates available. When I go to "Add-ons" it gives a list of Add-ons but I'm not sure which would help my issue. Any help would be appreciated.:)
== This happened ==
Every time Firefox opened
== I decided to Download and Use Firefox on this computer. I was using IE before, and it works fine. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content?

How to downgrade easily from windows 8.1 OEM to Windows 7 Pro

Hi,
I've tried to get used to Windows 8.1 (7 months), but I did not find a solution to get the classic view (3D look instead of the extra flat look) nor to play spider solitaire in a windowed mode, it always opens in full screen (desktop PC 2560x1440). If I
get the game in a small windows, it's a "crab view" = lateral.
I've created an account and when I went online the 1st time, Microsoft made it a MS account and I don't have my own account anymore. I don't feel that I own the PC, it doesn't feel like my personal PC. It feels like a public internet PC. I have no pleasure
at all using it.
I feel sad because I have been saving money for so long to buy a powerful PC with a nice large screen and it is so disappointing because of Windows 8.1 OEM. I have a license for Windows 7 Pro but if install it and it does not work (I can't find all the drivers),
the company I bought it from warns me I will lose my warranty.
It seems incredible to me that I have now 1st to pay Windows 8.1 Pro (I want to run away from it) in order to get downgrade rights. I feel miserable and helpless.
In the past I have bought a PC every time there was a new O/S (Windows 3.1, 95, 98, Millennium, Windows 2000, XP, XP Pro, Vista Home, Windows 7 Home.
Please any help is appreciated. I would like to be able to downgrade automatically, like when you click the "Windows update item in Start Menu" that everything happens automatically, but instead of upgrading I would like to downgrade.
Caroline

You can only do a clean install of Windows 7 to "downgrade" from Windows 8.1. There is no other path.
And you must ensure your hardware has support for Windows 7. Many of the platforms with Windows 8 do not have the necessary drivers to support the installation.
Follow Milos Puchta's advise and contact the manufacturer/vendor of your system for all assistance in this endeavor.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

How to upgrade Windows 8 pro OEM to 8.1 pro for a home PC builder

Built a PC. bought Windows 8 Pro OEM and installed. don't need retail as I have never needed support before. Tried to upgrade to 8.1 but my licence is OEM (I have a COA), but it will not update through store. Advised that 'volume licences'
must consult system administrator. As I have agreed to the home PC builder agreement, then I am the administrator. Check through Microsoft and for Volume licences you can down load 8.1 upgrade from the Microsoft Volume Licensing Service Center
(VLSC), but I have a single OEM licence so cannot access that route.
Can I ask if there is a way to upgrade to 8.1 or do I have to buy windows 8.1 OEM and install that.

COA Sticker says 'Windows 8 pro for oem software' then the product key
<DiagReport>
<LicensingData>
<ToolVersion>6.2.9200.16384</ToolVersion>
<LicensingStatus>SL_LICENSING_STATUS_LICENSED</LicensingStatus>
<LicensingStatusReason>0x00000000</LicensingStatusReason>
<LocalGenuineState>SL_GEN_STATE_IS_GENUINE</LocalGenuineState>
<LocalGenuineResultP>1</LocalGenuineResultP>
<LastOnlineGenuineResult>0x00000000</LastOnlineGenuineResult>
<GraceTimeMinutes>0</GraceTimeMinutes>
<TotalGraceDays>0</TotalGraceDays>
<ValidityExpiration></ValidityExpiration>
<ActivePartialProductKey>PWCK2</ActivePartialProductKey>
<ActiveProductKeyPid2>00178-50102-15414-AA046</ActiveProductKeyPid2>
<OSVersion>6.2.9200.2.00010100.0.0.048</OSVersion>
<ProductName>Windows 8 Pro</ProductName>
<ProcessorArchitecture>x64</ProcessorArchitecture>
<EditionId></EditionId>
<BuildLab>9200.win8_gdr.140502-1507</BuildLab>
<TimeZone>GMT Standard Time(GMT+01:00)</TimeZone>
<ActiveSkuId>949d6b86-bfa7-4ff1-b4df-17e67bb6320d</ActiveSkuId>
<ActiveSkuDescription>Windows(R) Operating System, VOLUME_MAK channel</ActiveSkuDescription>
<ProductUniquenessGroups>55c92734-d682-4d71-983e-d6ec3f16059f</ProductUniquenessGroups>
<ActiveProductKeyPKeyId>86202a92-0652-8022-5991-343ba2f20bc2</ActiveProductKeyPKeyId>
<ActiveProductKeyPidEx>05426-01785-010-215414-03-2057-9200.0000-2452014</ActiveProductKeyPidEx>
<ActiveProductKeyChannel>Volume:MAK</ActiveProductKeyChannel>
<ActiveVolumeCustomerPid></ActiveVolumeCustomerPid>
<OfflineInstallationId>566732249641728780885422514181499647154083204397030748926614966</OfflineInstallationId>
<DomainJoined>false</DomainJoined>
<ComputerSid>S-1-5-21-2653051395-138031257-847549496</ComputerSid>
<ProductLCID>2057</ProductLCID>
<UserLCID>2057</UserLCID>
<SystemLCID>2057</SystemLCID>
<CodeSigning>SIGNED_INFO_PRS_SIGNED</CodeSigning>
<ServiceAvailable>true</ServiceAvailable>
<OemMarkerVersion></OemMarkerVersion>
<OemId></OemId>
<OemTableId></OemTableId>
<Manufacturer>Gigabyte Technology Co., Ltd.</Manufacturer>
<Model>To be filled by O.E.M.</Model>
<InstallDate>20140902153518.000000+060</InstallDate>
</LicensingData>
<HealthCheck>
<Result>PASS</Result>
<TamperedItems></TamperedItems>
</HealthCheck>
<GenuineAuthz>
<ServerProps>GenuineId=55c92734-d682-4d71-983e-d6ec3f16059f;OemId=;OptionalInfoId=;Pid=6Ydd8896JiOFO1zSH32MVg40Lh+PZGZaDEGDuuX+bwg=;SkuId=949d6b86-bfa7-4ff1-b4df-17e67bb6320d;TimeStampServer=2014-09-02T19:07:22Z;</ServerProps>
</GenuineAuthz>
</DiagReport>

Problem beim installieren von Adobe Acrobat X Pro/Problem when installing Adobe Acrobat X Pro

Hallo,
ich wollte Adobe Acrobat von 8 Pro auf X Pro updaten. Dabei kommt jedoch die Fehlermeldung, dass die Systemanforderungen nicht gegeben sind.
Nun sind die Systemanforderungen aber gegeben.
OS: Windows XP Professional SP3 (32bit)
3 Gb Arbeitsspeicher
Prozessor: Intel Core2-Duo
Festplattenspeicher ist auch genug frei.
Internet Explorer ist in der Version 8 vorhanden.
Alle Systemanforderungen, die auf der Verpackung stehen sind gegeben. Trotzdem lässt sich Acrobat X Pro nicht installieren. Auf anderen Rechnern mit der gleichen Ausstattung habe ich Acrobat X Pro bereits erfolgreich upgedatet. Nur dieser eine PC will nicht.
Habt ihr schon mal von so einem Problem gehört?
Würde mich über Tipps oder Lösungen freuen.
Danke schonmal im Voraus.
Gruß Top93
Hello,
I wanted to update Adobe Acrobat to X Pro. When I wanted to start the installation an error message occured. The systemrequirements aren't given.
My systemrequirements:
OS: Windows XP Professional SP3 (32bit)
3 Gb main memory
Prozessor: Intel Core2-Duo
30 Gb free Hard drive space
Internet Explorer 8 is installed
So you see the systemrequirements are given. On other PCs with the same configuration I updated Adobe Acrobat to X Pro without any problems.
Has anyone ever seen such a problem?
Please help me.
Thanks in advance.
Top93

Ok, ich habe das Problem gefunden.
Auf dem Pc war Windows XP Pro SP2 installiert. Normalerweise haben wir auf jedem PC bei uns ein Standard Image, welches das Betriebssystem, MS Office und andere Programme, welche hier immer gebraucht werden, beinhaltet. Also habe ich auf diesem PC nicht nach dem Betriebssystem geschaut, da ja auf jedem PC Windows XP Pro SP3 installiert ist. Keine Ahnung warum auf diesem das nicht der Fall war.
Trotzdem vielen Dank für deine Zeit und Mühe David.
Gruß Top93
Ok, I found the problem.
On the PC Windows XP Pro SP2 was installed. Usually we've got a standard image on all our PCs with the main software like OS, MS Office and other programms. So I didn' look at the OS which is installed on this PC because on every PC is XP Pro SP3. I've got no idea why there was only SP2 on this PC.
Nevertheless many thanks for your time and your effort David.
Top93
(sorry for my bad english ;-)

Acrobat X Pro doesn't install on Win XP

Hello,
I have recently purchased 5 licences of Acrobat X Pro and downloaded the application from the website. However, once I attempt to install it, i get this (screenshot below) and install gets aborted.
Here is screenshot of my computer configuration (same accross 100+pcs)
I am using legally purchased Windows XP Pro, all updates installed regularly and I do not have Acrobat Reader installed.
Any help would be appreciated.

You must have SP3 installed.
See here: http://www.adobe.com/products/acrobatpro/tech-specs.html

Windows xp pro // tryin to install oracle 10.1.2.0 login into oralce ;

Similar Messages

Maybe you are looking for