Windows XP Service Pack 2

My company is considering deploying windows XP Service Pack 2. Does anyone know of any compatability issues after the updates have been applied? I'm wondering if IE is going to have any problems with the source pages generated by Plumtree. I understand that the service pack includes several changes to IE.
Thanks,
Jared Lanter

I've been using 4.5 WS SP 2 for a few days now without incident. My client workstation is running Win XP SP 2 with the updated IE. Don't know about 5.x, but I haven't noticed a difference on 4.5 WS.
You should review the documents Microsoft put out regarding the IE updates. For the mostpart you should be fine. If you have embedded Active-X controls or java you might see issues with security warnings. This document might be helpful to you (there's a better one, but I can't seem to find the link...):
http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2brows.mspx

Similar Messages

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HP UFT 12.02 not installing on Windows 7 Service Pack 1

HP UFT 12.02 is not installing on Windows 7 Service Pack 1. But the Install Guide says it supports and recommends Windows 7 Service Pack 1 as the Operating System.

Hey Hello Dear,
   Please upgrade UR windows 7 Service pack to Service pack 2.
   from my knowledge for SQL SERVER 2012 it requires Windows 7 service pack.
   And before installing SQL server 2012 Plz activate .NET framework for that,
   Put UR windows 7 Format CD then,
   Run Command prompt as Administrator and paste following cmd in that
DISM.exe /online /enable-feature /featurename:NetFX3 /All /Source:c:\net35 /LimitAccess
it will take 2 min. after that restart your PC and try to install SQL server 2012.
Note: Before installing SQL SERVER again format UR PC/lapy once.
After this if it gives error while installation then plz change ur setup and try again.
This will be helpful.
Best of Luck
Regards,
Sandesh

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

G580 wireless device not recognized in windows Xp service pack 3

Hi i bought a new laptop last week, g580 and the serial no is **********. I have installed windows xp service pack 3 and the laptop cannot detect the wlan device when i check in the hardware/device manager/network adapter , i also get a message when i turnon my laptop from the wlan adapter that the drivers are missing. I have downloaded the wireless drivers from the lenovo support website i.e. WLAN (Liteon, Cybertan) and when i am trying to install the drivers a error pops up saying "BCM4313 : cannot find setup file". So please guide me to resolve this issue, i also installed wimax but it says the wimax device is not found.
Moderator note: serial number removed for member's protection.

Hi vijeth,
thanks for posting and welcome to the community,
Based from your post here this does seem to be a driver issues impacting your Broadcom wireless card that has been fitted into your machine. This Error code is actually wide spread across different Manufacturers that has the Broadcom wireless installed. At this point it is uncertain what the exact solution is. Some have rectified the issue by doing a windows update and it had installed the broadcom drivers and that had solved the issue.
Currently there are some solutions that has help some of the users. Especially from the thread below.
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G580-Limited-access-Wireless-problem/td-p/9155...
You may want to check this out. Some of the user are experiencing this Win 7 or Win8. But it worth checking what they did as it might help you out as well.
regards

Error - iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3 ???

In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???

You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter. That's also done in Get Info for the file or folder concerned.
Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

Can't update windows 7 service pack 1, can I use windows 8 for AirPort Extreme on my laptop?

I need help! I'm trying to set up AE with 3 laptops, a desk top, an ipad and two iPhones! Got the software downloaded onto all but one laptop. My laptop won't configure windows 7 service pack 1 so the AE software won't install. I've tried all Microsoft fixes and still nothing. Any ideas? Can I upgrade to windows 8 and proceed or can you tell me how to get this computer to configure properly?!

Hey Me little
You can set it up using the AirPort Utility app for iOS. It has the ability to set up the AirPort Extreme for you.
AirPort Utility
https://itunes.apple.com/us/app/airport-utility/id427276530?mt=8
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How do i get windows xp service pack 2 or later?

When trying to install itunes, it says i need windows xp service pack 2 or later. How do i get tis i have never had this problem before

Hey menel77,
Click Start> All Programs> Windows Update, this will take you to the Microsoft update page.
Jason

Windows xp service pack 3 not compatible with 10.6

I have windows xp service pack 3. When I try to play music on Itunes 10.6, it just makes garbage. What is the highest version of itunes I can run.

iTunes (the current version) requires Windows XP SP2 and higher.
The version of iTunes is not the issue.
Does playing the media in other media players, like Windows Media Player, result in the same garbage?

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Can't update AIR application on Windows XP service pack 3

We've run into another AIR update issue with our AIR 2.0.4 sidecar product.
Our application uses the standard ApplicationUpdater.checkNow() method to look for and download updates. Just such an update was issued recently, and one of our team members has reported an issue attempting to download the new update on a Windows XP service pack 3 machine.
They are getting an Error 16818.
Thanks for any insight.

Hi,
Error 16818 is "IO error while saving data to disk". Is there any way we could get the installer log from this machine? It might give us additional clues.
Thanks,
Chris

Latest patch for 11.2.0.3, OS is windows 2003 service pack 2 (32 bit)

Hello everyone,
Can any body let me know what is the latest CPU and PSU patch for 11.2.0.3, OS is windows 2003 service pack 2 (32 bit).
I found this patch 16042647 i don't no either it's CPU or PSU.
Re: Patch 16042647: Oracle Database Family 11.2.0.3.0 for Microsoft Windows (32-bit) - ORACLE 11G 11.2.0.3 PATCH 15 BUG FOR WINDOWS 32 BIT
Thanks

In readme file i found this that why i am confused.
Table 1 Installation Types and CPU Applicability
Installation Type Latest CPU with Security Fixes
Server homes CPUJan2013
Client-Only Installations CPUOct2012
Instant Client Installations None
(The Instant Client installation is not the same as the client-only Installation. For additional information about Instant Client installations, see Oracle Database Concepts.)

Windows Vista Service Pack 1

Company I work for just got some new MSDN CD & DVD's and included in the pack was the official Windows Vista Service Pack 1 DVD. Just curious if anyone else has tried it with Boot Camp and had any issues? Was considering installing it but just wanted to check the forums to see what's up.

The general public release of Vista SP1 is out today and supposedly available through Windows Update, yet it does not appear as an available update when I check for it. Microsoft says that will happen in a number of cases, one being if there are incompatible drivers installed (which Microsoft knows about presumably). I'm wondering if anyone running Vista via Boot Camp has been able to access SP1 through Windows Update. It can also be downloaded, but I don't want to try it if it's not going to work. Another problem might be that I only have around 1.75 gigabytes left on the Windows partition. Any advice appreciated.

Windows 7 Service Pack 1 installation

HI,
When i deploy Service Pack1 for windows 7 via SCCM, it gets installed in client machines. But when they restart, they are not getting the message "windows 7 service pack 1 is now installed" while logging in. But OS version is changed and in the
ARP, it shows the entry. When i login in the same machine (my ID has admin rights), this message is showing up.
Problem is when i target this machine in IE 9 collection, it is not getting deployed till the time i login in the client machine and click close in the message box. please suggest me what we should do to resolve this.
Thanks in Advance.
Regards,
Raja

How did you deploy the SP1? via SUP or Software Distribution？ What version does the System Properties show if you use the normal user's credential to open it? If it does show Windows 7 with SP1. It means the SP1 is installed successfully.
I assume the pop-up is just a reminder to tell us the SP1 finishes installing and somehow it needs admin or system account credential so that the normal user cannot see it.
Juke Chou
TechNet Community Support

Windows 7 Service Pack 1 for x64-based Systems (KB976932)

After failed attempts to install Windows 7 Service Pack 1, I ran this HotFix
Hotfix for Windows (KB947821)
Installation date: ‎2/‎18/‎2014 1:41 PM
Installation status: Successful
Update type: Important
Fix for KB947821
More information:
http://support.microsoft.com/?kbid=947821
Help and Support:
http://support.microsoft.com
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.

Hi,
Are you refering to this KB?
KB947821
Fix Windows Update corruption errors such as 0x80070002 and 0x80070057
Could you please have a share with the error messages that shown after SP1 failed to install?
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.
Do you mean the computer wants to continually install another copy every time when shutdown?
Please make sure we have enough space in the system drive(where the system OS installed), perform a cleanup of that drive(ensure we have ), then take a try to boot into
clean boot and install SP1 manually, download fron here:Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Best regards
Michael Shao
TechNet Community Support

Drivers for HP2000C printer to run on Windows XP Service Pack 2

I am trying to reinstall an HP2000C printer on Windows XP Service Pack 2. When I insert CD a message says "Your operating system is not supported by this program". Problem I am having is that when I try to print a PDF file the printer cycles but does not print. I can print o.k. from Word or other programs. Could it be the PDF set up that is causing the problem. Hope somebody can provide me with an answer. Waiting hopefully.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial ink board here:
http://h30499.www3.hp.com/t5/Printers-Designjet-Large-Format/bd-p/bsc-414
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Windows XP Service Pack 2

Similar Messages

Maybe you are looking for