Windows XP/Solaris 10/laptop - Problem after to install recomended patches

Hi,
I have a Toshiba laptop with a HDD 40GB. Tow partitions: 20GB for Windows XP and 20GB for Solaris 10 3/05.
1.- Windows was installes first, later with a boot linux CD I use fdisk to resize the disk and create a new partition to install Solaris 10.
2. I installed Solaris 10 perfectly and I worked for more than 1 year this way.
3.- When I turn on the laptop a menu show me and let me choose from where to boot, Windows XP or Solaris.
4.- Now, I got the Solaris 10 Recomended bundle of patches from EIS-DVD (may302006) and I decide to update Solaris 10. I loged into Solaris 10 and in Single user applied the recomended bundle of patches. It become with the new boot loader GRUB and this just let me start Solaris.
5.- format sees the disk with 20GB for solaris and from fdisk utility I could see the Windows XP partition and the Solaris 10 partition as Active.
6.- I setted the Windows partition (1) as Active and reboot the system.
7.- Now I cannot get anything. The laptop turn on and no display is show, nothing.
Someone of you can helpme with this?
Thank you for comments and experience.
spersant

Well, I found a doc #73412 where teach how to enable Windows XP partition with boot loader GRUB.
But my problem is my laptop don't start because the active partition defined with fdisk from Solaris, doesn't have the Master Boot Record and don't show anything on the screen. I am trying to get access through the function keys, but I cannot.
Any suggestion??
spersant

Similar Messages

  • I'm trying to install itunes on new laptop but after clicking install button it jumps straight to thank you page!

    i'm trying to install itunes on laptop but after clicking install button it jumps straight to thank you page!

    Hello hate_technology,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    If you are having trouble installing iTunes or QuickTime for Windows, follow the troubleshooting steps in this article.
    Best of luck,
    Mario

  • My Late 2009 27" iMac i7 wake up problems after LION installed

    About 5 or 6X, My iMac has had wake up problems after I installed LION.  The screen wakes but the trackpad or mouse are frozen.  I have to do a hard shut down (pressing the power button) for system to work correctly.  When I power on the Mac, then everything functions.  NEVER had this issue with Safari!

    Exatly the same problem here with Lion on iMac 27" C2D late 2009.
    more discussion about the issue here: https://discussions.apple.com/message/15757182#15757182

  • Laptop problems after reformat

    Hi all,
    After formatting my laptop and re-installing Windows 7 I am having problems,
    1. Both shift keys do not work
    2. And the audio doesn't work dispite the drivers being installed.
    HELP.
    Thanks in advanced
    Chris

    HI @chrisjd2
    I grasp that after formatting your notebook and reinstalling Windows 64 bit you are having an issue with the audio and the keyboard.
    Did you do a recover or install from a Windows disk?
    Have you done all your Windows updates?
    Have you ran the HP Support Assistant ?
    Try updating the keyboard driver in Device Manager.
    Here is a link to the software and drivers for your notebook and Windows 7 . Please ensure you have the recommended drivers and updates installed.
    HP Pavilion g6-1160sa Notebook PC Software and Drivers
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Weird problems after clean install on Win 7 64 bit

    So I just built out a brand new machine with Win 7 64 bit and installed CS4 on it.  PS works great, super quick!  As I went through and tried to work on some websites last night, I found that the File/Open, File/Save and File/SaveAs options don't work?  When you first open Dreamweaver (or Flash - haven't tested anything other than PS/DW/FL) the initial opening screen you can click on new HTML doc for example but clicking Open... doesn't bring up the windows open/browse dialog box.  My DW install is all up to date and I tried to install over the top of it but that didn't help.  Does anyone have any idea what is going on? Thanks in advance for any insight or help you can offer!
    --J

    I have been running Dreamweaver CS4 on Windows 7 64-bit without problems for over a month (new machine, not upgraded from a previous version of Windows). The only part that fails is the documented problem with selecting the site root in a new site definition (see http://forums.adobe.com/thread/478327).

  • I am having this Problem after I installed MSE!

    Hello,
    Yesterday, I removed Norton and I installed Microsoft Security Essential (MSE) Anti-virus. Just after that, I am having this issue with Mozilla. Since, I am Mozilla Lover, I always browse Net with Mozilla.
    Main Problem ->
    When I gone to my own site, I was not able to see some images, I mean some of those which uses CSS cropping technique. (I don't know how much you guyz will understand this :P)
    But it was working correctly with Chrome, but after I installed MSE, my browsing/downloading speed become very low in both.
    The following are some Pic, 1 of them are snapped chrome and 1 is mozilla..
    [http://i1137.photobucket.com/albums/n501/harshitpeer/chrome.png Chrome Snap Link]
    [http://i1137.photobucket.com/albums/n501/harshitpeer/mozilla.png Mozilla Snap Link]

    And when you called your phone carrier what did they say?

  • Graphic problem after Lion installed? Anyone else?

    After i installed Lion, ive been having problems with the graphics while playing world of warcraft ? [url=http://bildr.no/view/1020583][img]http://bildr.no/thumb/1020583.jpeg[/img][/url]
    Anyone know what to do?
    Thanks

    i have the same configuration and i've been having issues with Time Machine as well.

  • Fan  problem after Leopard install

    PowerMac Dual G5 - after Leopard install, fan between hard drive and optical drive revved up like the computer was going to blast off, faster and faster until I powered down by holding down the power button. Leopard seems to be working fine, but with the fan continuing to go at high speed at all times. I've tried reboot, reinstall, pull plug for a few minutes, remove CMOS battery, and zap PRAM, all to no avail. I haven't put the panel cover back on yet, and that may work, but I won't have time to mess with it for a few days and hope for some insight before I try that.Ideas?

    Problem went away. Must have been a ghost in the machine.

  • Apple ID problem after Mavericks install

    Hello Everyone,
    After upgrading to Mavericks I tried to read one of my books in ibooks, and after signing in with my apple id I received a notification with the following error "This computer is already associated with an Apple ID." The book was originally bought and downloaded on my iPad, but I cannot download them on my Mac. I also get the same error in iTunes when I try to play/download a song from the cloud.
    I managed to get the book after syncronizing my iOS devices, but I was wondering if anyone encountered this.

    Now that I think about it, this started happening after I installed iTunes 11

  • After I installed the patches, the server and Jdeveloper do not start, Why?

    I installed the patch 1,2,3 and mandatory patch 4369818 this afternoon. It showed installing is successful. But after the installing, I do not start the server and Jdeveloper.
    05/11/27 22:21:28 java.lang.Thread.run(Thread.java:534) This is the server error.
    When I start the Jdeveloper, the picture of starting flashed and disappeared. I don't know why. PLS people who know causes reply to me. I will feel grateful to you.

    some questions to help us understanding this ssue a little bit better ..
    1) what plattform and what versions of jdeveloper and bpel
    2) pls run jdev.exe and not jdevw.exe to get a debug window ,, what exception does it show there..
    3) is the message you posted the only one you've ssen on the server?
    thx clemens

  • Solaric boot up problem after poweroff

    Hi Everybody,
    I have a solaris 10 8/07 installation on X86. I have problem regarding boot up after power off. Its not booting in multiuser mode and hangs up at the blue screen. Could we do something in the single user mode to rectify the problem, because its possible to boot in single user mode?
    Thanks.

    Please include your full model number when posting problems on the forums. It can be found on the bottom of your laptop.
    If it's now working perfectly, then I wouldn't worry about it if I were you. However, I can say that it's best to do a system recovery with the exact media designed for your notebook and then upgrade if you wish.
    - Peter

  • Problems after re-installing Windows on W520

    Hi I'm new to this forum, quite weird as I have been using this W520 for 3 years now...
    I've recently re-installed Windows 7 64bit on my W520 and having some small problems.
    1. I can't have the mute-mic hotkey to work as the mute hotkey (no light) and nothing on the screen to indicate the hotkeys I just pressed. I've installed the Hotkey Features Integration for Windows 8 (32-bit, 64-bit), 7 (32-bit, 64-bit), Vista (32-bit, 64-bi...
    2. I don't know if I was using the Optimus Graphics feature before but I can't find it anywhere (device manager, Nvidia control panel, etc). I'm assuming that I was using the Quadro 1000M all the time as my battery life is not great. How can I know that I have it turned on?

    Hello.
    You can try out an older version of the Hotkey Integration package, found here
    For your graphics setup, you can check it in BIOS, go to Config - Display - Graphics Device, there you can select to either run Integrated or discrete only, and nVidia Optimus for both.
    Cheers!
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • Mac App store problem after Mavericks install

    I have installed Mavericks, 3 times now, on my MacBook Air. There have been a few hicups but the only one I have been unable to fix is the App Store. It will open, accept my user name and perform updates however it will not allow me to view or download new Apps. If I create a new user that user has full functionality. So the Maverick install has obviously done something to my Mac Store user settings. Has anyone any idea how I fix it?
    Thanks

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use  another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Windows 8 Audio has locked up after itunes install?!

    Anyone got a clue how to restore sound operations on a windows 8 system after an itunes install.
    I uninstalled all apple products, but the audio is still broken. Automated problem resolution didn't work.
    My last option is to do a restore, but that's kind of ugly. Any other suggestions?
    Anybody reported iTunes 11 to DHS as a virus yet?
    Thanks
    m

    To whom it may concern:
    Be forewarned ... Execute a system checkpoint for restore prior to executing iTunes 11(64) installation on Windows 8 platforms. Be prepared to execute a restore after installation given it appears that iTunes 11 will change basic settings on systems with multiple advamced audio systems (hdmi + analog) resulting in configurations that point parts of the audio stream at disconnected hardware/software streams.
    These errors will result in all audio playback system "freezing", or failing to load and sequence audio files properly. Quick resolution is to restore the system from checkpoint and removing all traces of the iTunes package.
    Man i really miss Steve!
    Love my iPad, love my iPod, hate iTunes with a passion!
    m

  • Screen Problems after Leopard install.

    When I first installed Leopard, I got a black screen full scrolling white text after only 10min of use.
    I did a clean install and that problem is gone, but I'm still getting very odd screen problems. The Apple logo and translucent part of the menu bar go away at times and it freezes some times too.
    I was wondering if any other iMac G4 users have had these problems... ???

    I believe the default settings for labels and text in Finder windows, if that's what you mean, is 12 point. You you can change font size through View Options. Text sizes for menus, etc. is fixed; I don't know what the size is specifically. For Firefox, text size for web pages is specified by the web site generally, but you can change the size Firefox will default to in the Firefox Content preferences.
    I hope I've answered the question you were asking. Regards.

Maybe you are looking for

  • Query on Sales Order Analysis

    Dear Experts I have written a Query for Sales Order Analysis and would like to have help on this. The query is used for generating daily report for Sales Order on number of documents (Sales Order), total amount of sales orders and total GP of Sales O

  • JDBC + MySQL : "Operation Not Allowed After ResultSet Closed"

    I have a very short piece of code. I use one connection to the database. I execute a query, get back a lot of rows, then iterate through the result set and for each row I get some information and then perform an insert into a different table. The pro

  • MUTATING TABLES(ORA-04091) ERROR

    HI ALL, i am trying to solve the above problem. I don't have much experience in pl/sql. I tell u the problem. I am trying to write trigger on transaction_master table before insert or update so that record can insert into tran_modify_log table. Becau

  • Works as List, not as Map

    I'm having an issue with 1-M mappings where the type of the child attribute is a java.util.Map. When I read the parent and reference the child, Toplink is only populating one object in the Map, even though there multiple in the database. When I chang

  • Characteristics Value screen suppress while Sales Order creation

    Hi Experts, In Super BOM of header item, we have around 50 materials as Configurable components. Now when user create Sales Order, system first shows Value Assignment Screen for all configurable components. So here user intervention is more. Requirem