Windows XP SP 2 DHCP failure connecting to OS X Tiger Server

Hello,
Standard setup for DHCP Server on OS X Tiger Server... latest version. Mac's acquire 192.168.7.x just fine from OS X Server. When XP SP2 client attempts, shows self-assigned ip and subnet. Looking at the DHCP log in Server Admin, the server sees the xp client discover message, offers a response to the xp client, but that is it... no request for DHCP configuration information or acknowledge. If I go wireless, 10.0.0.x with XP, does fine as does the mac clients. What am I missing. Turned off the firewall, same scenario for DHCP through OS X Server. If I plug in the XP client directly into the cable modem, works fine for DHCP also. I've done some searching on the net for some info, unable to find any info that helps. Any help on this would be greatly appreciated.

Add some setup info. en0 is the static ip address for the server to the cable modem... 10 static. Using en1 as the DHCP server 192.168.7.1. Network consists of 10/100 switches. Standard DHCP settings in SA. IP range from 192.168.7.2 thru 127 using en1. DNS is set to 192.168.7.1. LDAP is configured and works fine with Open Directory on. I do have WINS set to our en0 static ip address for the server, but Windows services in SA are off. That is the DHCP settings in SA. Any info and help would be greatly appreciated.

Similar Messages

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Using Windows NT 4.0 client program connecting to oracle 8i linux server

Dear sir/madam,
Recently, I have successfully installed Oracle 8i in my red hat linux database server. I am disappointed because I can find client side Oracle Enterprise Manager in my linux server even I have installed client program in my linux database server.
Next, I install Oracle 8i client side program (windows NT/2000 version) in my Windows NT 4.0 server. I am still disappointed because I find Oracle Enterprise Manager console cannot work.
For Windows NT 4.0 Enterprise Manager, I have key in default administrator sysman, password oem_temp, and connect to mamagement server hangng (my linux database server). An error message display 'VTK-1000 Unable to connect to the management server hangng. Please verify that you have entered the correct host name and the status of the Oracle Management Server.'.
What's wrong with both Oracle 8i Management Server in linux database server and windows nt 4.0 server. Is there any problem for Oracle Management server console to connect to red hat linux database server?

[email protected] wrote:
I need to confirm that I will be able to connect an Oracle 11g R2 client (administrator install) to an Oracle 8i DB before i bother trying to setup such a scenario?Don't waste your time. It won't work. It simply results in an error.
I saw another thread that mentioned a patch level required for 8i to let the 10g client connect. Is there such a patch level needed for 11g clients as well?There is no such patch for 8i which allows 11g client to connect.

Mac OS X Server v10.7 does not show the ethernet link aggregated interface I created in Server Hardware Network Dialogue window. Are link aggregated ethernet connections not supported in Lion Server?

Mac OS X Server v10.7 does not show the ethernet link aggregated interface i created. Does Lion server support ethernet link aggregated interfaces?

Thanks for responding Cold--
Hardware: Mac Pro 3.0 GHZ quad core xeon
I read the link but it still does not explain why the aggregated dual ethernet interface does not show up in the Network tab of the hardware section Lion Server. I was able to see it on the network and looks to be using a single static IP that I assigned. My concern was that is this supported and will it allow for failover and double performance of the single network interface.
Any thoughts?
Thanks again!

Windows 7 Pro Client loses connectivity to internal Win2k8 web server

1. affected workstation are Optiplex 380 running Win 7 pro sp1 with broadcom NICs.
2. Internal users use a internal webserver for customer invoicing application. Users lose connectivity to this internal web server, all other networking works, network shares, internet, etc. If I try to ping the webserver IP I get no reply. XP
machines are not affected. Not a DHCP issue as there are plenty of IPs.
3. I have tried different internal NICs (3com) but still had issue. I have upgraded BIOS, nic drivers. etc.
4. I rebuilt one of the machines using Windows XP pro sp3 and have had no issue with that workstation.
the problem started a few months or so ago. I have not been able to determine the source. I tried running wireshark but nothing stuck out. I have changed the session settings on the IIS server from 15 minutes to 6 hours but did not make a difference.
5. Today when client lost connectivity to the server I tried pinging from the server back to the client and the connection was restored. This issue really has me confused as I cannot find anything in the logs that sticks out.

Hello,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.

Mail server failure. connection refused. too manay connections - when using sp_send_dbmail with job agent

Hello All,
I've a weird problem when I'm using "SP_Send_dbmail" to send a simple e-mail to two recipients using job agent.
The code i write is:
exec msdb.dbo.sp_send_dbmail
   @profile_name= 'Send Reports',
   @recipients = '[email protected] ; [email protected]',
   @Copy_recipients = '[email protected]',
   @Body = 'Whatever will be here',
   @subject = 'Daily Reports',
   @file_attachments = 'd:\MyFolder\MyFile.txt';
The error i receive is:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-03-03T14:57:17). Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response
was: service not available (connection refused, too many connections)).
Does any one know why i get such error???
Please advise.
Hany Mounir

Hello,
Please consider any Windows Firewall, security hardware/software, policies on your organization’s mail
server.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

BIAPPS 7.9.5.1 Failure connecting to integration service

Business Intelligence 10.1.3.4.1
Biapps version 7.9.5.1
Informática Powercenter 8.1.1
After completing the installation according to the manual we have copied the hibernate libraries in DAC directory:
http://download.oracle.com/docs/cd/E10783_01/doc/bi.79/e10742/anyinstadmwininstall.htm#i1105233
And also copied the Emergency Bug Files in Informatica:
Informatica Session Completing Successfully, but Still in Running Status
We have tried with Informática Powercenter 8.1.1 without Service Pack, and also applying the SP5, but we are getting the same error in DAC while making the Test Connection in both cases:
"Failure connecting to "integracion_informa"
STD OUTPUT
Informatica(r) PMCD, version [8.1.1 SP5], build [135.0129], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Righst reserved
Invoked at Fri Apr 16 13:29:52 2010
The command: [pingserver] is deprecated. Please use the commando [pingservice] in the future.
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [integracion_informa:4006]
Completed at Fri Apr 16 13:29:52 2010
ERROR OUTPUT"
cmd window:
"16-abr-2010 13:29:52 com.siebel.analytics.etl.client.util.DataVerification giveWarning
INFO: Unknown verification type!
16-abr-2010 13:29:52 com.siebel.analytics.etl.client.data.dataobject.UpdatableDataObject createUpdate
INFO: 0 calls to database avoided
DAC Command Line Utility Invocation"
There´s no other information about the error. Test connection for repository is correct.
We have done the installation many times, restarted the computer, restarted informatica services, restarted DAC server, verified in the Powercenter Admin Console that both (integration and repository) services are up...
Days ago, we have succesfully installed Biapps 7.9.6.1 and loaded PeopleSoft 9.0 data, but now we are trying to load PeopleSoft 8.8 and we are obligued to uses Biapps 7.9.5.1, because 7.9.6.1 have no connection with PeopleSoft 8.8.
Thanks in advance.
Edited by: user11179355 on 19-abr-2010 1:46

We have upgraded this repository to connect to it using DAC version 10.1.3.4.1 and we noticed that in Setup-Informatica Servers all the fields except Domain, had the values we entered using the previous version of DAC. This makes sense, because in the previous version of DAC (Biapps 7.9.5.1) you cannot enter the domain name.
If we try to connect to it without filling this field we get the same blank error. But if we fill it with the correct domain name the test ends succesfully. So if we could put the domain name in DAC Biapps 7.9.5.1 we might make it work.
Is there any place where you can put the domain name value in this version?
Does anyone know the table where this value is stored?

Windows Vista Machine Can No Longer Connect to Mac Following Upgrade

Before: Windows Vista machine with 6 drive letters mapped to the 6 hard drives in my Mac Pro running 10.5.8.
After: Mac Pro upgraded to 10.6. Now the Vista machine cannot connect to any of the drive letters, nor can it open the Mac Pro by browsing -- the Mac Pro shows up, but cannot be opened. A second Windows machine also cannot open any shares on the Mac Pro.
I have checked all of the settings in Network on the Mac Pro and they look fine. Does anyone have any ideas for things to check?

I was able to see the other Windows XP computer and begin to connect. I was then presented with a login screen. I tried using the usual user name and password - no luck. I then formatted the user name as as follows:
user name: computer name\user name
password: as normal
And it worked. Specifically in my case:
user: cwy-pln2152\administrator
password: planning
This is what worked for me your mileage may vary.

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
a) HP printer with USB port only (no ethernet port) connected to Airport Express
b) No issue printing from Macs
Tests
1) Installed Bonjour 2 - does not find printer (now uninstalled)
2) Bonjour 3 is listed in programs but no way to access
3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
Regards
Richard
p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

This is possible, but not with Bonjour or any other fixes. It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

HT4972 I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS.

I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE 10.6.3 DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS."DEVICE LIST" IS NOT DISPLAYING IN LEFT HAND SIDE WINDOW OF I TUNE. BEFORE IT WAS WORKING IN ITUNES 9 AND I WAS USING IT. BUT NOW IT IS NOT DETECTIN AT ALL. SO PLEASE HELP ME WHAT TO DO?

Have you tried here:
iOS: Device not recognized in iTunes for Windows

My phone wont back up or sync to itunes 10.6. i have a windows 7 32 bit laptop. i have tried updating the ios and receive the message saying it cannot connect to the iphone update server please check network connection. any help

have a iphone 4. i have downloaded the latest version of itunes to update the ios. I am having problems with the back up and sync and also the update. the update error message is coming up saying it cannot connect to the iphone update server. I am useing a windows 7 32 bit laptop. I have also reset my phone to factory settings. Would taking it to one of the stores and they would do it for me??
any help will be great thank you

All I can tell you is that I am having the exact same problem with an iPod Touch and that I was running iTunes 9.2.1.5 at the time it happened. Upgraded to 10.0.0.68 hoping that it might help, but no joy.
I don't want to do a restore just now since the Touch seems to be working fine. Restore will have to wait until I have plenty of free time in case something goes wrong.

Windows 7 clients suddenly unable to connect to SQL database

Our environment in a nutshell:
Server1: Small Business Server 2003 R2 (Active Directory domain, it is the sole domain controller [DC])
Server2: Dedicated to SQL Server 2005 and the SAP Business One database
Server3: Windows Server 2003 R2 Standard Terminal Server. This provides user sessions that are the equivalent of Windows XP SP3.
Two Windows 7 workstations: 1x 64-bit, 1x 32-bit. Both are domain joined.
All above computers on a gigabit LAN.
Client product is SAP Business One 2007 A (8.00.181) SP:00 PL:49
SQL Native Client is 9.00.5000.00
SQL Server is mixed-mode authentication, however all users use trusted Windows connections. All users with access to the product are members of an "SAP Users" domain security group.
Normal operation is:
Local Win7 workstations have client installed and connect over the LAN to the SQL Server instance on Server2
Remote users log on to the Server3 Terminal Server, fire up sessions and connect to the SQL Server instance
Up to and including Thursday, March 12 everything was working fine for all users. As of Friday, March 13 the Terminal Server users/sessions are still working perfectly but the Windows 7 workstations can no longer connect to the SQL Server instance with trusted connections. They are still able to connect if they switch to a SQL Server logon and use the "sa" user account and its password.
Also, the users normally using the Win7 workstations can log on to the Terminal Server with their usual domain accounts, and run SAP from there, which works perfectly.
The error the Windows 7 users are seeing:
Connection failed:
SQL State: 28000
SQL Server Error: 18452
[Microsoft][SQL Native Client][SQL Server]Login failed for user ". The user is not associated with a trusted SQL Server connection.
Prior to each logon attempt above, the Server2 SQL Server machine logs another event to its Application Event Log:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: xx.xx.xx.xx]
Source: SQL Server instance, event 17806. From SQL Server log, Severity 20, State 2
What I've tried so far:
All servers have been restarted in correct order
Running the client in Windows XP SP3 compatibility mode. No difference
Running the client as Administrator. No difference
Upgrading to SQL Server Native Client 11.0 via:
Uninstall B1 client
Uninstall v9.00 Native Client
Install v11.00 Native Client
Install B1 client
Net effect is no difference
Googling the event IDs that are being logged seems to point to:
Expired domain account. Manually checked that the 2 users accounts are not expired and they belong to the "SAP Users" group. Furthermore, the domain accounts are still working when used in Terminal Server sessions.
Problem with Service Primary Names (SPNs). This seems to be Active Directory-related. Again, the domain accounts normally used on the Win7 workstations work fine on the Terminal Server so I'm inclined to think AD is OK
Other information that may be useful:
No Windows updates applied between March 12 and 13 on either Win7 workstation
Both Win7 workstations running Microsoft Security Essentials and the native Windows 7 firewall
All servers running Trend Worry Free Business Security suite
Sorry about the length of the post but hopefully it will reduce wild goose chases. Any troubleshooting ideas greatly appreciated.

Problem found!
It turns out it was some sort of subtle problem with Trend antivirus running on the servers.
On all 3 servers there are 3 main protection components that are enabled by default:
Antivirus/Anti-spyware
Web Reputation
URL Filtering
What I did was to turn off all 3 components for all the servers. With Trend this can be done from the central management console. SAP then worked on one of the Win7 clients using Trusted Connection (i.e. Windows Authentication).
Then I turned the Trend components back on, on all servers, one at a time (to try to find which component was the culprit). Here’s the funny part: I turned all 3 back on, and SAP still works on the Win7 client using Windows Authentication! I even restarted it to make sure that state of affairs persists across a restart, and it’s still OK.
It's worth noting the problem was not solved shortly after it appeared by restarting all 3 servers. There was even a scheduled installation of Windows updates a couple of hours ago, which restarted all 3 servers again, and the problem still persisted. It was not fixed until the Trend components were globally disabled (on all 3 servers), then re-enabled.
Trend WBFS is version 9.0, pre SP1.

I can't connect to the itunes store. I have the latest version of itunes on my windows 7 computer. I can connect to itunes from my ipad and ipod but no my windows computer. i dont get any error message, the bar at the top just says accessing itunes.

I can't connect to the itunes store. I have the latest version of itunes on my windows 7 computer. I can connect to itunes from my ipad and ipod but no my windows computer. i dont get any error message, the bar at the top just says accessing itunes

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Window 2000 & RMI client losing network connection

We have a client/server java application communicating via RMI. The application runs perfect when the network is running smoothly. However, once the client loses connectivity with the network, the client runs in offline mode (as expected). However, once the client reestablishes a connection with the network, it is unable to communicate with the Server via RMI. It seems that Windows 2000 reassigns the client's IP address when it goes offline to localhost (127.0.0.1), when the client is reconnected the IP addresses is changed back to the network address, but it is unable to send data to the server running RMI. Any suggestions? We did not experience this problem with Windows NT.

you need to specify the IP address of the server object from the JVM in which it is exported, using -Djava.rmi.server.hostname argument to the JVM (since the client and server run on one machine, you probably want to set this to 127.0.0.1, I think)

My iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging as well, bit confusing

my iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging when i connected to the laptop as well, bit confusing, help please

Take a look at this link, http://support.apple.com/kb/TS1538

Windows XP SP 2 DHCP failure connecting to OS X Tiger Server

Similar Messages

Maybe you are looking for