Windows XP SP3 Migration

Dear Sir! I am a old Windows XP SP3 user. and now i want to use Windows 8.1 so can i or can i not, Migration Windows XP SP3 to Windows 8.1?? in my MCSA Windows 8.1 Class my instructor have told me that we can (Under Supported Windows 8.1 Upgrade
Paths) Migration to Windows 8.1 from Windows XP SP3. please help me out here!
i'm getting this message when i try to install Windows 8.1
(the procedure entry point __CxxFrameHandler3 could now be located in the dynamic library msvcrt.dll)

Hi,
Migrating from Windows XP to Windows 8.1 can really be achieved. You should use
the User State Migration Tool (USMT) 5.0, it’s a scriptable command-line tool that provides a highly-customizable user-profile migration experience.
During migration, you should do these things:
1. Install the USMT.
2. Run ScanState to Create a Migration Store on the Server.
3. Install Windows 8.1.
4. Apply Data Using the LoadState Tool.
For more information, you can refer to these links:
Migrating from Windows XP to Windows 8.1
http://www.microsoftvirtualacademy.com/training-courses/migrating-from-windows-xp-to-windows-8-1
Step-by-Step: Basic Windows Migration using USMT for IT Professionals
http://technet.microsoft.com/en-us/library/dd883247(v=ws.10).aspx

Similar Messages

USMT restore from Windows XP sp3 x86 to Vista x86 service pack 1 - USMT error code 36

Hi
We have been unable to restore user profile from Windows XP sp3 x86 to Vista x86 service pack 1 using USMT .
we keep receiving errors, see log below.
We have taken the backup from the windows xp several times, and Googled high and low for an answer - cannot get it to work.
We have used this sane command method on several windows xp to windows 7 migrations , without any issues.
please help
2014-06-11 14:50:18, Info                  [0x000000] LOADSTATE.EXE Version 6.2.9200.16384[gle=0x000000b7]
2014-06-11 14:50:18, Info                  [0x000000] USMT Started at 2014/06/11:14:50:18.626
2014-06-11 14:50:18, Info                  [0x000000] Command line: loadstate
\\backup\Profiles\Migration\Paul G /i:\\backup\Profiles\Migration\Paul G\migapp.xml /i:\\backup\Profiles\Migration\Paul G\miguser.xml /ue:*\* /ui:UNSWORTH\paulg /lac /lae /progress:C:\Users\ADMINI~1\AppData\Local\Temp\USMTprog.log
/l:C:\Users\ADMINI~1\AppData\Local\Temp\USMTload.log
ï»¿2014-06-11 14:50:18, Error                 [0x000000] Only Windows 7 and Windows 8 are supported as destinations.[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] Unsupported OS Version: 6.0.6001.Service Pack 1[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] Failed.[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000]   Compliance check failure; please check the logs for details[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] USMT Completed at 2014/06/11:14:50:18.628[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] * USMT error code 36: [gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] +-----------------------------------------------------------------------------------------[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] | Compliance check failure; please check the logs for details[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] +-----------------------------------------------------------------------------------------[gle=0x000000cb]

We are using
USMTGUI  5.0.3, which I understand uses latest version of windows USMT ( 6.3) .
When I try using USMT 6.2 from AIKTOOLS to restore the profile using this command , i get a different error. I have even tried adding /hardlink /nocompress and restoring profile from portable hard drive instead of NAS, and getting a different
error;
2014-06-12 11:53:21, Info [0x000000] USMT Started at 2014/06/12:11:53:21.897
2014-06-12 11:53:21, Info [0x000000] Command line: loadstate E:\conference-pc /i:E:\conference-pc\migapp.xml /i:E:\conference-pc\miguser.xml /ue:*\* /ui:UNSWORTH\administrator /lac /lae /progress:C:\Users\ADMINI~1\AppData\Local\Temp\USMTprog.log /l:C:\Users\ADMINI~1\AppData\Local\Temp\USMTload.log /hardlink /nocompress
2014-06-12 11:53:21, Info [0x000000] Script file specified: E:\conference-pc\migapp.xml[gle=0x000000cb]
2014-06-12 11:53:21, Info [0x000000] Script file specified: E:\conference-pc\miguser.xml[gle=0x000000cb]
2014-06-12 11:53:21, Info [0x000000] Starting the migration process[gle=0x000000cb]
2014-06-12 11:53:22, Warning [0x080462] CListSysFileFilter::BuildTree: could not create FileList object for Z:\SFLISTLH.DAT: Win32Exception: \\?\Z:\SFLISTLH.DAT: The system cannot find the file specified. [0x00000002] __thiscall UnBCL::FileStream::FileStream(const class UnBCL::String *,enum UnBCL::FileMode,enum UnBCL::FileAccess,enum UnBCL::FileShare,unsigned long)
2014-06-12 11:53:24, Info [0x000000] System information:
Computer name: WIN-4Q9K3THYGWW
Machine SID: S-1-5-21-1202719645-4168933617-2382629769
OS version: 6.0.6002.Service Pack 2
Language: en-US
Architecture: 32-bit
Drives:
C: Type: Fixed, Bus type: ATA, Hotplug: No
D: Type: CD/DVD
E: Type: Fixed, Bus type: USB, Hotplug: Yes
Z: Type: Remote
F: Type: CD/DVD
Users:
WIN-4Q9K3THYGWW\Guest, administrator: No, interactive: Yes, logged on: No, has profile: No
UNSWORTH\administrator, administrator: Yes, interactive: Yes, logged on: Yes, has profile: Yes
WIN-4Q9K3THYGWW\Administrator, administrator: Yes, interactive: Yes, logged on: No, has profile: Yes
2014-06-12 11:53:24, Info [0x000000] Processing the settings store
2014-06-12 11:53:24, Error [0x080000] HARDLINK: cannot find distributed store for c - 14f873cb-57a5-48c7-90d9-5d001c5625b6[gle=0x00000002]
2014-06-12 11:53:24, Error [0x0802e3] SelectTransport: OpenDevice failed with Exception: Win32Exception: HARDLINK: cannot find all distributed stores.: There are no more files. [0x00000012] void __thiscall Mig::CMediaManager::SelectTransportInternal(int,unsigned int,struct Mig::IDeviceInitializationData *,int,int,int,__w64 unsigned long,class Mig::CDeviceProgressAdapter *)
void __thiscall Mig::CHardLinkHelper::Open(class UnBCL::String *)[gle=0x00000002]
2014-06-12 11:53:24, Error [0x000000] Unable to open store at E:\conference-pc\USMT[gle=0x00000002]
2014-06-12 11:53:24, Error [0x000000] Failed to select store. Path: E:\conference-pc[gle=0x00000002]
2014-06-12 11:53:24, Warning [0x000000] Internal error 23 was translated to a default error
2014-06-12 11:53:24, Info [0x000000] Failed.[gle=0x00000091]
2014-06-12 11:53:24, Info [0x000000] An error occurred during store access[gle=0x00000091]
2014-06-12 11:53:24, Info [0x000000] USMT Completed at 2014/06/12:11:53:24.718[gle=0x00000091]

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

I have windows xp sp3, run Mcaffee security software- when I open I-tunes it does open however it will not connet to the I-tunes store. I-Tunes diagnostic indicates that it does connect to internet but the secure link to I-Tunes fails.

I have windows xp sp3, run Mcaffee security software- when I open I-Tunes it does open however it will not connet to the I-Tunes store. I-Tunes diagnostic indicates that it does connect to the internet but the secure ling to I-Tunes fails. I-Tunes diagnostic attached. Hope some one can help. Microsoft Windows XP Professional Service Pack 3 (Build 2600) Dell Inc. MP061 iTunes 11.0.2.26 QuickTime 7.7.3 FairPlay 2.3.31 Apple Application Support 2.3.3 iPod Updater Library 10.0d2 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile Device 6.1.0.13 Apple Mobile Device Driver 1.64.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.6.502 Gracenote MusicID 1.9.6.115 Gracenote Submit 1.9.6.143 Gracenote DSP 1.9.6.45 iTunes Serial Number 0012B5500B576CC8 Current user is an administrator. The current local date and time is 2013-04-28 10:27:11. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is not supported. Core Media is supported. Video Display Information ATI Mobility Radeon X1400 **** External Plug-ins Information **** No external plug-ins installed. iPodService 11.0.2.26 is currently running. iTunesHelper 11.0.2.26 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** Network Connectivity Tests **** Network Adapter Information Adapter Name: {7282B8D2-078A-4414-82D6-A506F9C935D0} Description: WiMAX Network Adapter - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: 255.255.255.255 Lease Obtained: Wed Feb 13 12:30:29 2013 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {9CE46F79-8015-4C15-A074-B1ACA4388E56} Description: Sierra Wireless Network Adapter - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: Lease Obtained: Mon Jan 18 21:14:07 2038 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {1A876FC9-50B6-4101-8E4F-838AF1D1CB32} Description: Dell Wireless 1390 WLAN Mini-Card - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: Lease Obtained: Mon Jan 18 21:14:07 2038 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {E64A2DD8-7A18-4784-8DC0-08B143E504A7} Description: Broadcom 440x 10/100 Integrated Controller - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: 10.0.40.20 Lease Obtained: Thu Aug 23 15:54:15 2012 Lease Expires: Thu Aug 23 17:54:15 2012 DNS Servers: Adapter Name: {2A9F97F5-D693-427F-BA40-9C3AA36937B1} Description: WAN (PPP/SLIP) Interface IP Address: 107.42.83.109 Subnet Mask: 255.255.255.255 Default Gateway: 107.42.83.109 DHCP Enabled: No DHCP Server: Lease Obtained: Wed Dec 31 18:00:00 1969 Lease Expires: Wed Dec 31 18:00:00 1969 DNS Servers: 66.1.77.7 68.29.73.7 Active Connection: Mobile Connected: Yes Online: Yes Using Modem: Yes Using LAN: No Using Proxy: No Firewall Information Windows Firewall is on. iTunes is enabled in Windows Firewall. Connection attempt to Apple web site was unsuccessful. The network connection timed out. Basic connection to the store failed. The network connection timed out. Connection attempt to Gracenote server was successful. The network connection timed out. Last successful iTunes Store access was 2013-04-16 10:14:47.

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

Cannot open Reader program, no error messages (Windows XP, SP3)

Hello all! I am hoping someone can provide a solution to my frustration....
Earlier this summer I was having some computer trouble. The computer was under warranty - HP came out and changed the memory and system board.
I have not been having any issues except for ONE thing - I cannot open Adobe Reader to view PDF files. Any PDF files on my system show the Adobe icon, but when clicking on a PDF file or the application itself, nothing happens. The hourly glass shows up briefly and then goes away, but otherwise, nothing.
Temporarily, I got by using another PDF reader. Unfortunately, some of our business systems only work with Adobe, so getting Adobe to work is now critical.
What I have tried (with no luck):
1) Uninstalled Reader, did a system search to remove all Reader files, re-installed latest version
2) Searched the Adobe community and other internet sites for help - tried a Microsoft fix, Adobe cleaner program, went into the Program Files menu to accept the user agreement, etc.
3) Installed earlier verions (9.5, and then 7.0)
Any other ideas? I called back HP, and they tried to be helpful but said it was a software issues since all other programs were running successfully. They suggested I re-install the operating system!
Thank you for your help.
-Marcus

My Laptop Specification :- 2GB RAM ,Dual Core Processer ,300 GB Hard Disk ,Windows XP-SP3
I would recommend adding 4 GB more, you need at least 4GB-6GB for R12 only (not including the OS).
Please see if (RW-50004 Installing EBS 12.1.1 Failed At 53 % During OH Registration (Doc ID 1592143.1)) helps.
Thanks,
Hussein

I can no longer print PDF files that were scanned with the very same MX479 on Windows XP, SP3

I can no longer print PDF files that were scanned with the very same MX479 All-in-One.
I have an (obsolete) Windows XP, SP3 computer. Obviously, no updates from Microsoft
have occurred that might have impacted my Canon Pixma MX479.
When I attempt to send 1 or more pages from a PDF file to the printer, I don't even get the
Canon PIXMA popup that would allow me to cancel the print job.
Yet the Print Queue icon appears in the lower right corner of my monitor.
If I view the Print Queue, the print queue shows "spooling" and does nothing more.
If I attempt to CANCEL the print job in the Print Queue, it simply changes to "deleting -
spooling".
I cannot cancel the print job that shows NOT RESPONDING via Task Manager, either.
In fact, the only way the Print Queue icon disappears is if I totally reboot my computer!
"Luckily", I can still print e-mails, Word documents, and even my downloaded PDF of my
bank statement.
So, I was thinking that it was *only* PIXMA'S OWN SCANNED PDFS that could not be
printed ON THE SAME PIXMA 479.
However, I have since realized that I also cannot print USPS Signature Proof of Delivery
PDFs that I received from USPS via e-mail.
So why can I print *some* PDF files, but not *all* PDF files, like I previously could do?
THESE SCANS ARE OF LEGAL DOCUMENTS, SO I WILL LIKELY HAVE TO E-MAIL
THE REQUISITE, PREVIOUSLY SCANNED PDFS TO FEDEX TO PAY FOR *THEM*
TO PRINT THEM.
NOTE: I *have* tried turning the PIXMA off, unplugging it, rebooting the computer, plugging
the PIXM in and restarting the PIXMA - still no ability to print PIXMA-scanned PDFs.
And, I find it very strange that e-mails, Word documents, and some other PDFs print with
no problem "around" "NOT RESPONDING" PIXMA print jobs.
I have owned Canon printers for years, including the MX420, and the MX340.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Windows XP SP3 does not recognize iPod Classic

I have an older computer with Windows XP SP3 and iTunes 10.2.2. iTunes does not recognize (load) my iPod Classic (160Gb model) when I plug it in. The iPod lights up and charges fine, but it does not appear in the left menu bar in iTunes.
I have an old iPod Shuffle that loads into iTunes just fine.
I have tried a number of remedies:
Updated the computer to XP Service Pack 3.
Completely uninstalled and reinstalled iTunes twice.
Reset the iPod Classic several times.
Tried plugging the iPod into different USB ports on the computer.
My music library is on an external drive, so I was able to borrow a computer (Win7) and use it to load the music into my iPod. But this isn't a permanent solution.
Does anyone know of a potential fix that I haven't considered?
Thanks in advance.

Try restarting your Apple Mobile Device Service, kent:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
(Classics also use AMDS to a greater or lesser degree, so trouble with the service or other aspects of Apple Mobile Device Support can cause some grief with a Classic connection.)

ITunes 10.5.3 Installation on Windows XP SP3: hanging on "Registering iTunes Automation Server"

I have uninstalled successfully iTunes 10.5.1 from my notebook and reinstalled iTunes 10.5.3.3. Unfortunately, in reinstallation process, iTunes is hanging on "Registering iTunes Automation Server" for over 3 hours!!!!!!!! Quicktime, Safari, Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update are all reinstalled successfully!!! WHAT's the problem for my notebook? How to overcome this issue??? Please help me !!!!!!!!!!!!!!!!!!!!
System:Windows XP SP3
Apple iPhone 4S, iPad 2, iPod Classic

Noboday has ideas about this issue???

Itunes 12.1.1.4 not run cd rom on windows xp sp3. have removed all cd burning software

itunes 12.1.1.4 not run cd rom on windows xp sp3. have removed all cd burning software.

Thanks Alex,
I performed all of the steps you suggested and iTunes v-12.1.1 installed correctly.
The problem is, that version of iTunes now does not recognize my HL-DTST DV-DRAM GMA-4082N, CD/DVD DRIVE.
When I insert a CD to rip into my iTunes library nothing happens.
If I click on the properties for that D-drive nothing shows using the Explore function.
If I open Microsoft Media Player v-11.0.5721.5262 I can see all of the tracks on the disk, and the player rips the songs to the Microsoft Media Player library which I can then play.
I then reinstalled VLC media player v-2.1.5, and was able to play cd's and watch DVD's. When I performed that install I again received the iTunes banner:
Earlier versions of iTunes worked just fine:
iTunes v-11.4 (32-bit) 10 September, 2014, (6 months ago), size: [106.11 MB], for Windows XP SP3 worked on this same Toshiba laptop.
The latest version: iTunes v-12.1.1 seems to want to be the only piece of software allowed on the 32 Bit XP system.
To me, it looks like Apple does not want any other applications running on this system. Not very thoughtful for customers that cannot afford to purchase more expensive computers when they are on a fixed income. I have been a long time user of Apple equipment when employed by Motorola, development engineering.in my younger years.
Is there any way to get the earlier versions of iTunes back on this laptop?
Thanks,
Jay

Windows XP SP3 for my mac book pro

I want to know if i can install windows XP SP3 on my mac book pro ( new one from yesterday) version 10.6.7 ?

No See here: http://support.apple.com/kb/HT4410
You could use a VM like Parallels, Fusion, or VirtualBox to install XP SP3.

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

HP Laserjet Pro MFP M125A " A Fatal Error Occured Preventing Product Use" on Window XP SP3

Dear Friends,
I really need your help on this issues, recently company that i been working buy 19 Unit of HP Laserjet Pro MFP M125A printer to be install at our 19 branches. All of our branches is using Window XP SP3 and the spec is exceed the minimum requirement stated at the box of the HP Printers which means by rights, it should be no problems.
However, I sent and setup the printer at 4 branches only 1 is a success. others 3 centre is showing the same errors which is A Fatal Error Occured Preventing Product Use. I been trying to install using original CD provided by HP and driver provided at HP Support also given the same errors. The 1 Centre that OK PC spec is almost the same as the others 3 and all using default programs and software. So i dont knows what really is the problem.
This is the things i have done in hoping to successfully install the driver but WITH NO SUCCESS:
Clear temp file, disk cleanup, defragment disk and restart PC.
Reinstall Windows SP3 and restart PC.
Install basic driver only and using control panel > device and printer > add printer (Select Driver Manually). (See Pic Below)
Repair windows using original windows XP SP3 CD.
Re-Check for USB.INF file.
Repair Registry with reg cure.
Uninstall USB support and etc (Google), then re-install the printers.
Uninstall Antivirus, disable all startup and services.
Install using FULL DRIVER, BASIC DRIVER AND DRIVER MANUAL.
Sometime when running the installer, it will prompt the below error signature and HP installer will loading quite long and then crash, but others PC don't have this errors, it straight away to the installation menu until DETECTING PRINTER until 99% and shows errors "A Fatal Error Occured Preventing Product Use".
It seems that almost everythings i try cannot make the printer driver to be install. However, the SCAN driver is install successfully. Currently the printer only can PHOTOCOPY AND SCAN, without being able to print.
Please anyone which facing similiar issues to HELP ME. anythings i can do, to install the printer DRIVER.
THANKS!

Hi @gendit ,
I see that you are having issues installing several Laserjet Pro MFP M125A printers on several Windows XP computers. You are getting "A Fatal Error Occured Preventing Product Use". I can help you with this.
What version of .NetFrameworks do you have? Check Your DOTNET.
You might have to run the Windows Updates. I would update the .Netframeworks to 4.0.
I believe HP software piggy backs Internet Explorer. Should have at least Internet Explorer 6.0.
Please try these steps, most likely the wrong driver is getting installed, giving you the Fatal error.
Disconnect the USB cable.
Uninstall the printer software from the CD.
Run the software again, immediately after connecting the USB cable, follow this document to update the driver before it errors out again. A Fatal Error Displays During Software Installation.
If the issue persists, here is a document with some different steps to try.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows XP SP3 and Dreamweaver 8.0.2 - "Error"

Windows XP SP3 and Dreamweaver 8.0.2
I am recently receiving this error message whenever I open a file -
"The following translators were not loaded due to errors:
ColdFusion.htm: has configuration information that is invalid.
JSP.htm: has configuration information that is invalid."
Really big problem;
I have lost ALL my disc so I can not do a clean install of anything!
Any help would be greatly appreciated.

Try clearing your program cache...
http://forums.adobe.com/thread/494811
If that doesn't help, try restoring the preferences...
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If you still have the activation number, you can try reinstalling a clean version available here (make sure you are logged into Adobe):
https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads

Bootcamp and Windows XP SP3

Ok, here goes. I have a Macbook Pro OS=10.6.8, 2.53gHz Intel Core Duo, 4gb, 1067mHz DDR3. I am...or was, I should say, running Windows XP SP2++ beautifully (as marginally beautiful as Windows is) using VMware Fusion 3.1.3 thru Bootcamp. I bought TurboTax for Business 1120 filers (no Mac version avail). This requires Windows XP SP3. No problem, if XP SP2 runs well, so should SP3 - NOPE!
After SP3 finished updating, I did the standard shut down and reboot. The Bootcamp window came up like it normally does with the cheesy Windows icon as is was bringing up Windows. Then, suddenly, I get the dreaded blue screen error (anyone that has suffered thru windows has experienced this). I tried completely shutting down the Mac and then restarting, but got the same error. I have attached a picture of the error message:

no I got it going eventually.. the problem was i was impatient.. apparently even an hour of waiting with no response doesn't mean a hang.. If you'll just leave it overnight it will move on to the next step..
A google search shows that i'm not the only one fooled by this.. at 33 minutes to go... there are various postings by people who assumed a hang after a long period of nothing happening..
Anyway all happy now.. Thought i'd let people know if they have this issue.
1/ you CAN install XP SP3 with bootcamp 2.0. The pdf guide on the site and the install guide you print out from bootcamp assistant both say twice that you can install XP SP2 or later.. The confusion comes with UPDATES form SP2 to SP3.. It appears to do this you need to first install the Bootcamp 2.1 update in windows.
2/When installing Windows, if you get a very long period of no feedback back to you and you assume the install has hanged, if the green progress indicators are still moving it is still working, but it may take HOURS..
Hope this helps someone else..

Windows XP SP3 Migration

Similar Messages

Maybe you are looking for