Windows XP tablet edytion and problem with driver X200

Hello
I have problem with Windows XP Tablet edytion , I must working with this system . Microsoft stop all. I do not have a one driver is SM Bus controller and not work tablet button . Can you help me ?

Hi Wogabun and welcome to the community,
Download and install TVSU and run it and see what it comes up with.  You'll need MS Net Framework 1.1 or 2.0 at least for it to run.
Regards,
Dave 
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Does anybody know if Windows 8 is causing a problem with iTunes?   Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere.  Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

    Does anybody know if Windows 8 is causing a problem with iTunes?  Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere.  .  Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Backup Error - 0x810000E4 Windows Backup has encountered a problem with the backup catalog

    Dear all,
    I'm trying to backup my files onto a 2TB big external USB disk. My computer is Dell Latitude E4300.
    When I run the backup, it runs normally but ends with this error:
    0x810000E4 Windows Backup has encountered a problem with the backup catalog
    When checking the zip files on the USB drive, it seems that only some of the files have been backed up. The same confirms the restore option when I browse the files in the backup.
    When I start the backup again, it continues - i.e. acknowledges the files already there and backs up a additional files but again fails after some time.
    Any ideas please.
    Thank you,
    Tomas

    Hello Tomas,
    This is not expected.
    Could you please collect the backup failure traces from %windir%\Logs\WindowsBackup and send them to my mail-id -
    [email protected] (pl. remove -nospam phrase from the id to get the correct one).
    Thanks,
    Sriram [MSFT]
    Sriram [MSFT]

  • All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

    All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

    Are the songs playing whole in iTunes? if not download them again.
    else read this Apple Support Article on your problem
    Have a nice day!

  • HT204302 At the very end of installing iTunes 11.1.1.11 a window appears: "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." Availab

    At the very end of installing iTunes 11.1.1.11 a window appears: "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." Available choice is click "OK" then "Finish" and install has then failed.

    Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you can't find ASU, go to Control Panel:
    XP - Add n Remove Programs
    Win7/Vista - Programs n Features
    Highlight ASU, click change then Repair.

  • Any new  about updating lion to 10.7.4 and problems  with bluetooth devices  like Bose Soundlink Bluetooth Speaker?

    Any new  about updating lion to 10.7.4 and problems  with bluetooth devices  like Bose Soundlink Bluetooth Speaker?

    Monroe
    Just in the moment i updated to lion 10.7.4  my Bose Soundlink Bluetooth  stop working as  good as it was. I´m gonna try the update in the Bose  web page. I hope  it works

  • Problem with driver for ipod nano 2nd gen on windows xp

    Every time i plug my ipod into my computer i get a message saying that theres a problem with the driver for an unknown usb device.
    Hp Pavillon 6630   Windows XP Pro  

    Have you had a chance to look at this troubleshooting
    page? It may be of some help: iPod is not recognized properly by computer
    when USB drivers are not installed properly or are
    out of date
    I tried that but it didnt do anything my ipod comes up as unknown device in the device manager and thats the only place it shows up no where else

  • HP Photosmart C4780 and Windows 8.1 -64-bit - Problems installing driver, plus wireless assistance

    Hello
    Apologies, I am technically challenged, so I hope I can explain myself. I have the above All-In-One Printer/ Scanner and now have a newish laptop with Windows 8.1 etc etc. I have incurred ongoing problems trying to scan documents to my laptop. I have managed to deduce that my printer driver has not installed. I have followed instructions from one of your help pages and downloaded whatever I needed to, however the driver is still not present.
    I read a solution offered through the Forum back in June 2014 about doing some form of reset. What exactly does this entail and will this result in me losing all settings/ favourites etc on my laptop?
    I am just trying the 'unplug the printer for 60 seconds thing' as also suggested to someone in May 2014. In the meantime if someone could get back to me anyway, I'd be grateful. I desperately need to rectify this problem, which I've been putting off for a couple of months as I need to scan alot of documents urgently.
    PS - can someone also talk me through how to get the wireless facility up and running after all these years!
    Many thanks, Amanda

    Hello @AmandaGreyUK , and welcome to the HP Forums!
    I see you're running into driver issues.  I would like to help.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Problems with driver in microsoft windows vista

    I speak of Brazil, I have a smarthfone BlackBerry 8100 and a Dell Inspiron 1525 notebook with Windows Vista 32-bit, Service Pack 1. I'm having problems with "Bluetooth peripheral device" and the solution of the problem indicates to contact with RIM to find and properly install the driver of that device. How did attempt to resolve the download of the BlackBerry Desktop Software v4.7, but said, I want to get a resolution to the problem. No more, thank you now.

    > What can we do?
    Let your Cisco rep know that this is an important feature. The word I have is that stateful firewall is not in the Vista feature set for Cisco.
    The readme for the Cisco VPN client 5.0 bears this out:
    Known Issues:
    CSCsh02887 Vista: Stateful firewall does not start.
    CSCse44616 Vista: VPN Client should not install Zone Lab Firewall on Vista platform
    CSCsf07334 Vista: Stateful Firewall Not Supported on Vista VPN Client

  • Extreme Music - Problems with Driver and Installation

    Hi guys,
    ?After the my computer has given up it's life on the last friday, I bought a new one and wanted yesterday to install everything like OS, driver and so on.
    I started the install of the driver(which is the version from the creative website , released in july 2009) for my soundcard, the X-FI Extreme Music and when the information was given, that the Windows drivers will be updated and it will take some minutes, something happend:
    At my first try a bluescreen appered. You can imagine, that I was shocked to see a bluescreen on my new pc after an hour.
    I run CCleaner to remove some rests of the "maybe installed" driver and started it again. There was no bluescreen, but the mouse freezes and the setup does nothing anymore. I can close it with may keyboard, but the driver wasn't installed.
    After a new clean up with CCleaner I tried it again. I put out my cable of the mouse , so maybe this was the problem(ofc, WHY is there a problem with USB and PCI Cards ?). The installations works, no hang up or freezes. After a restart nothing happend. No sound. I looked at the hardware manager(do not know, whether it is the correct word, I'm german and have a german windows ) of windows and at audio, video and gamecontroller, there is a warning of not working driver.
    I remember, that on my old system the driver was titled something like
    X-FI Audio[800] or something like that.
    But here it was named with?
    X-FI Processor WDM
    I thing the system is installing the wrong driver.
    I looked at some forums , find the hint to change the PCI slot. I did it, but nothing changed.
    So, here are some information of my system configuration, maybe someone can help.
    Old system(where the soundcard works fine with no problems):
    - Athlon X2 4200+(socket was the "old" 939)
    - Asus A8N-E
    - DDR 400 RAM, 2GB
    - Windows XP Professional(32 Bit) with SP3
    New System:
    - Phenom II X4 80(quadcore)
    - Gigabyte MA790XT-UD4P
    - DDR3 333 RAM , 4GB
    - same OS as used in the old configuration
    Ofc all chipdriver were installed and seems to work fine.
    The onboard soundchip is disabled too.
    Hope for help ^^
    Mel
    Message Edited by Meldanor on 08--2009 2:20 [email protected]

    Hi guys,
    I'm very sry for the wasted bytes and bits in this forum, but my problem was solved some minuetes after this post >.< .
    I tried once again to install the driver and everything is working ... until yet, but only the future will show me, whether it will work or not ^^
    What I've done? Just a restart after the post.

  • Windows Server 2003 and problem with SSL connection (TLS)

    Hi,
    We are forcing a problem with SLL/TLS connection on a machine Windows Server 2003 SP2.
    We spent hours trying to solve it without any result. 
    SYMPTOMS
    No SSL connection can be established in any application since last year, e.g.:
    we cannot do any windows update, because there is a time verification over SSL on the windows update website (there is an error that the time is incorrect while it is up-to-date)
    we cannot open any website in Internet Explorer over https
    when we try to connect to the SQL Server (database SQL 2008 hosted on the same server) with Management Studio it fails with an error: "A connection
    was successfully established with the server, but then an error occurred during the pre-login handshake.(provider: SSL Provider, error: 0 - Could not
    contact LSA)(Microsoft SQL Server)"
    in a custom applications which sends requests over https we receive an error: "Could not establish trust relationship for SSL/TLS secure channel"
    Everything seems to point at some SSL problem somewhere deep inside Windows.
    We installed several patches, but without any result. 
    Can anybody help?
    Regards,
    Dawid

    Hi, thanks for answers,
    - In IE both SSL2.0 and TLS1.0 are checked. We tried to disable TLS1.0 - with no results. 
    - In  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\Schannel both SSL2.0
    and TLS1.0 are enabled. We also tried to dislable TLS1.0 on the Client side - with no resuts. 
    - In
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL EventLogging is set to 3, so it should log warnings
    and errors. But we cannot find any related logs in EventLog
    Unfortunately we are still in the same place.

  • Y510p and problem with Update Nvidia Driver

    Hi everyonei have problem with updating my y510p lenovo laptop nvidia driver ,my current nvidia driver version is 327.62 which i download from lenovo website,Now for better performance in new games like gta v and witcher3 ,i decide to updating nvidia driver,first remove my nvidia graphic driver from add or remove then download nvidia ver 350 from nvidia official web site , which nvidia website confirm it support my graphic card which is Gt755m , then i install new ver and during install i check clean install , after successful install , restart laptop , then there was problem . when i try to open nvidia control panel it wont running and an error showed up and said "You are not currently using a display attached to an NVIDIA GPU" .i try to open a game , game running in really low fps and i find out game run on hd graphic of my laptop and my nvidia graphic wont run .The only way to repair was i install my last nvidia driver 327.62 and run a system restore .guys what is your suggestion and how i can update my y510p nvidia driver ?Thanks   

    Hi Y510Man,
         The video graphics installation order is important. You need to install the Intel Graphics first, and then do the Nvidia. IIRC you should un-install the Nvidia driver, then re-install (or upgrade) the Intel HD Graphics driver. Reboot, and install the new Nvidia driver.
         I don't know why, but every time I upgraded my Y470 Nvidia driver, I had to use this procedure. First install, or re-install, the Intel driver, then install the Nvidia. You can't just upgrade the Nvidia driver without a re-install of the Intel. I think it has to do with the Optimus setting, and the automatic switching.
        Let us know how it goes.
    Cheers
    DragonRider

  • Alligning page to very top of browser window and problem with a random error symbol

    Dear reader
    Before I start I would just like to say sorry for posting
    another help request so soon after I have posted one before but I
    am having a problem with my website. My website is www.iggpog22.com
    (but you must include the www. or it goes to the wrong site I do
    not know why) anyway I seem to get a random questionmark at the top
    of my webpage which is rather annoying. I believe it may have been
    the result of me trying to use the google search bar code and
    perhaps I left some old code in but I have searched and just cannot
    figure this out. Is it possible anyone could inform me of how to
    remove it aslong as it is not much trouble. I would also like to
    know how I can get the main section of my site to touch the top of
    the browser screen instead of leaving a gap for the background to
    show (and aswell if I can do the same for the bottom of the page)
    Thank you for any assistance
    .Sam

    02cspearson wrote:
    > Dear reader
    > Before I start I would just like to say sorry for
    posting another help request
    > so soon after I have posted one before but I am having a
    problem with my
    > website. My website is www.iggpog22.com (but you must
    include the www. or it
    > goes to the wrong site I do not know why) anyway I seem
    to get a random
    > questionmark at the top of my webpage which is rather
    annoying. I believe it
    > may have been the result of me trying to use the google
    search bar code and
    > perhaps I left some old code in but I have searched and
    just cannot figure this
    > out. Is it possible anyone could inform me of how to
    remove it aslong as it is
    > not much trouble. I would also like to know how I can
    get the main section of
    > my site to touch the top of the browser screen instead
    of leaving a gap for the
    > background to show (and aswell if I can do the same for
    the bottom of the page)
    >
    > Thank you for any assistance
    > .Sam
    >
    why not just look at the code of your page? it's there:
    <td width="88" rowspan="2" align="center"
    bgcolor="#333333"><img
    src="Images/Iggpog22Index/dev_id/ig2lgonobg.png" width="78"
    height="75" /></td>
    �
    Just remove that question mark, whatever it is.
    seb ( [email protected])
    http://webtrans1.com | high-end web
    design
    An Ingenious WebSite Builder:
    http://sitelander.com

  • Spaces and problems with windows on extended desktop (Cinema 20")

    I have got a MacBook connected to a Cinema Display 20". When I move a certain window (but this is happening maonly with Mail received messages windows) on a certain space, it should open the next messages always on the same display where the space is located (if you have the extended display the space is double) but on the contrary every message comes on the wrong side of the space. This was not happening till some days ago but now it is always like this. Is there any preference file that I can cancel so that the situation can be fixed as it was in the beginning? I hope I have explaind myself... Thanks

    Up please!

  • Installing Windows 7 RC From and External Hard Drive?

    I burned a DVD of the Windows 7 64-bit RC installer and successfully booted from the DVD. However, I hit the following error once the installer collects information about my hardware:
    "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, of USB Flash Drive, Please insert it now."
    I cannot proceed any further. Another discussion board noted that June 2007 Macbook Pros have had internal DVD drive problems from recent firmware upgrades. I seek an alternate installation method. (Would and external DVD reader work at boot time?)
    I'm trying to make a bootable external hard drive that has the Windows 7 Installer on it. I have tried extracting the contents of the Windows 7 RC iso file, and then placing the contents in a FAT32 formatted hard drive with the GUID Partition Table. However, my mac does not recognize the drive as bootable. I believe I am missing the procedure needed to make bootcamp recognize the drive as bootable. The drive was connected by Firewire if that matters.
    My computer currently runs Mac OS X Leopard and Windows XP SP2. I have no access to a machine running Windows Vista.
    How can I make a bootable external hard drive containing the Windows 7 installer for my macbook pro?

    You can't get there with GUID/GPT.
    There are tips on making a USB flash device that is bootable.
    You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
    Windows Vista can be upgraded in place to 7 RC.
    You'll need NTFS (30-50GB).
    Windows doesn't support FW for booting.
    You can create a drive that has Master Boot Record.

Maybe you are looking for