Windows XP - Update iTunes 10.5 doesn't work, mistake in the setup

During the installation of iTunes 10.5 a problem will be shown:
"Es liegt ein dieses Windows Installer-Paket betreffendes Problem vor. Ein Programm, das im Rahmen der Installation ausgeführt wurde, wurde nicht erfolgreich abgeschlossen. Wenden Sie sich an das Supportpersonal oder den Hersteller des Pakets."
I think this is an error within the installation procedure and couldn't corrected by myself.
Did anyone got the same problem? Perhaps in the next version of the iTunes setup it will be fixed.
If someone could help - thank you very much!
Regards
Enrico

Habe fast einen Tag damit herumgemacht! In einem Forum las ich den folgenden, wenn auch noch etwas stärker verschlüsselten Rat, der mir tatsächlich zur Lösung verhalf:
Copy "C:\Program Files\Apple Software Update" or "C:\Programme\Apple Software Update" (all of its contents) from a PC, on which iTunes 10.5 runs smoothly as it should, to exactly the same directory of the stubborn PC causing your problem. After that iTunes 10.5 (iTunesSetup.exe) installed extremely slowly but correctly on my PC.
Hope that works for U2.

Similar Messages

Can't download any apps anymore. Get an error of -45054. Running Yosemite and tried to update itunes, but that doesn't work either.

I "updated" itunes and now I am unable to download any apps. I receive the error message -45054, try later. Please advise.

Try repairing disk permissions in Disk Utility (it should be in the Utilities folder in Applications) : https://discussions.apple.com/message/23478840
If that doesn't fix it then try the suggestion three posts further down that thread by the same user (wmark), that appear to have worked for some people

Installing and Updating iTunes 7.3 doesn't work

ok so this afternoon, i tried to update my iTunes... it updated it, then i tried to get it to open and it said i need the Mac OS X 10.4.7 in order for it to work, so i searched the 10.4.7 on the apple site and downloaded it, but that didn't work either... and now i can't use my iTunes because my computer isn't up to date... and i can't seem to find iTunes7.2 or 7.1.... i don't know what to do... any suggestions?

Download and install either this update or this one, or run the Software Update pane of System Preferences and install the Mac OS X updater which appears.
(23007)

Updated itunes now it doesn't recognize my ipod nano 6

updated itunes now it doesn't recognize my ipod nano 6

Hello mhill10633,
Based on your post, it sounds as if your device is not recognized by iTunes for Windows. I have located an article that will walk you through a series of troubleshooting steps to resolve this:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

My iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

Hello ole-gunnar,
Thanks for using Apple Support Communities.
If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
If you see a black screen
You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on.
You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
Restart your device.
If it still doesn't respond, or if it doesn't turn back on, reset your device.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Alex H.

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

I just updated to the newest software and all my apps were deleted. I have tried syncing on itunes but it doesn't work. Help!

I just updated to the newest software and all my apps were deleted. I have tried syncing on itunes but it doesn't work. Help!

Try ReSynching to iTunes. If you set up sync to the cloud, turn that off, resync to your PC. That should bring them back. You can then turn on sync to cloud again.
You may, however, want to re-think that. There is a lot of chatter about the cloud being the source of some if not many of the battery issues. Personally, I decided to rurn the cloud off until the Battery-gate issue is resolved.
Good Luck.

My computer keeps saying that itunes is not working so i updated my windows and reinstalled itunes but it still doesnt work what do i do?

my computer keeps saying that itunes is not working so i updated my windows and reinstalled itunes but it still doesnt work what do i do?

This link will give service options for your Country ,select from drop down menu
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=iph one
To troubleshhoot restore see document below
http://support.apple.com/kb/HT1808

After update flash player doesn't work most of the time

Hi Folks!
Windows XP
IE 6
About 2 weeks ago I installed a flash player security update and ever since then flash player doesn't work most of the time. On most websites with embeded video all I see is an empty placeholder where the video is supposed to be.
If I go to a site like Youtube all is fine. However, if I go to a site that has embeded a Youtube video all I see is the empty placeholder where the video is supposed to be.
Some folks have recommended I uninstall and download and reinstall. The problem with this is that there isn't *anything* related to Abobe flash player in Add/Remove programs.
Not sure what to do about this (read: I'm totally lost!).
Here's a screencap of the empty placeholder:
http://i27.tinypic.com/2wrdttf.jpg

The standard warranty is for 12 months from the date of purchase, unless you bough AppleCare which would have extended it to 2 years.
If it's out of warranty, then you pay for repairs, and it's expensive. There are 3rd party repairers who are cheaper.
Did you try these?
The Five Rs.
As the previous poster said, it's more than likely a hardware issue, but there's no harm in trying the software fixes before you decide it needs repair.

I've just updated itunes and it has disappeared from my PC- the previous shortcut won't work and it can't locate on my file search- this is the second time this has happened when updating itunes- APPLE you're going donw the tubes slowly but surely..

I've just updated itunes and it has disappeared from my PC- the previous shortcut won't work and it can't locate on my file search- this is the second time this has happened when updating itunes- APPLE you seem to be going down the tubes slowly but surely..

its not apple going "down the tubes" its that you have windows junk. These opinion best left at apple.com/feedback
you need to completely uninstall itunes and all components
see these for help
http://support.apple.com/kb/HT1925
http://support.apple.com/kb/HT1923
Peace, Clyde

HT2404 I'm trying to update apps and download new ones on mi ipad, but it doesn't work... the icons say "waiting" and nothing happens for days!

I'm trying to update apps and download new ones on mi ipad, but it doesn't work... the icons say "waiting" and nothing happens for days!Help!

Here are a bunch of things that you can try to get the downloads to resume.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

When i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

when i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again.

I recently installed WIndows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

I recently installed Windows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

update your scanner's driver. ie, see if hp has a win 8 driver for that model.

Updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian

Windows XP - Update iTunes 10.5 doesn't work, mistake in the setup

Similar Messages

Maybe you are looking for