Windows xp update returned transfer aborted on iplanet proxy server 3.6

Have set proxy to bypass for windows updates.
However, once updates determined, they then fail to install, with the error "Tranfer aborted"

Hi,
If you are running iPlanet Web/Proxy server 3.6 under WindowsXP "OS" is not supported.
(OR)
Let me know whether your sceniro was has below.
That, when you tries to do a search(hit) on one of web sites(weblink like www.anytest.com).
You get the following error message:
"Transfer Aborted
Transfer was aborted for unknown reason. Retrying the request may work."
If it so please let me know whether proxy server is running on UNIX or WinNT platform.
Thanks,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Similar Messages

Iplanet Proxy server

My question is :
Does Iplanet proxy server 3.6 SP8 support the following http method :
PROPFIND, PROPPATCH,REPORT,MKACTIVITY,CHECKOUT,MKCOL,LOCK,UNLOCK,MERGE
I read that in the iplanet web server you can put this line in the magnus .conf:
Init fn="register-http-method" methods="PROPFIND,PROPPATCH,LOCK,UNLOCK........"
But in the Iplanet proxy server this line seem to be not support
The ``register-http-method`` is not support by the Iplanet proxy server
Do you have a solution to make these method fonctionning in the iplanet proxy server
Thanks in advance.

You may find interesting information there:
http://docs.sun.com/source/817-3880-10/sys-set.html
Under this chapter: "Allowing or Blocking Arbitrary Methods"

IPlanet Proxy Server 3.6/NT4 restart and heartbeat-Problems

Hi,
we get the following errors:
- Proxy Server: proxy-proxy Heartbeat connect failed: error - 10061
- Proxy Server: proxy-proxy Restarting proxy: reason - 0
- Proxy Server: proxy-proxy Restarting proxy: reason - 2
we were able to minimize the first error by tweaking the
heartbeat-timeout-values as described in the iPlanet-knowledgebase
although we didn't eliminate them completely.
The second error is seldom but the third error sometimes occures several
times within an hour. Does anyone around here know anything about this
error ? I didn't find anything in the knowledgebase.
Is anyone around who can help me out ?
Cheers,
Karsten
Energis-ISION
Karsten Wiborg
System Engineer
Steinhoeft 9
D-20459 Hamburg
Phone: +49 40-3070-1984
Fax: +49 40-3070-1909
eMail: [email protected]
Web: http://www.energis-ision.com

This is a GOOD question. I have just received the SAME message
Could SOMEONE come up with something ?
I've got Windows'2000 Professional and Netscape 7.2
It was only after I installed the Web Proxy Server that I found out I needed Netscape. So I downloaded and installed Netscape and then reinstalled the Web Proxy Server
I've noticed that sometimes IE6 still pops into the picture when something needs a browser

Update fails behind a MS ISA proxy server

We have all our clients behind a MS ISA proxy server. When
Flash player tries to update itself, or when you try to install it
from the download site, a network connection for the update times
out over and over. The only way to get around this has been to set
the configuration on the ISA server so that the workstation is
allowed to use anonymous authentication through the ISA server.
This is a royal pain in the neck and not something I can leave
configured for 60+ users. Anyone know of a fix or work around for
this? Even downloading the installer through a browser other than
IE and installing it doesn't seem to install the whole player.
Thanks in advance!
ML

Hum,
I've got the same problem with any kind of proxies.
And this is not news. Every other apple apps use the proxy config, but not mail since Tiger.
Why?
There is an ugly method by using some proxifier to open outgoing ssh tunnel, but, as i said, that's ugly and this solution needs to have an access to SSH server.
so, UP

HT201210 updating iOS - must log in to proxy server?

Hello, I am trying to update my IOS on my IPAD 3G. I am getting an error reading that i must log into the proxy server after clicking on the update button under Devices/ IPAD. How do i do this?

You might havefirewall or virus scanning software active and it might be causing this. Try shutting down firewall and virus scanning and see if it makes a difference

Does anyone have a perl script that can submit a proxy request to iplanet proxy server with basic authentication? We want to do content verification using BigIP.

Hi, Dave.
If you're using the BlackBerry browser, you can't configure anything to bypass the RIM servers. I believe you may do so by using the Opera browser, but I haven't tried it myself so cannot comment with authority.
I hope that clears up the issue for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Proxy Server in File Transfer System

Hi, I need to write out a file transfer system through a proxy server for my project
All the while i was writing a file transfer system directly from client to server without any security issue
Anyway, the scope is given as below, and i know it needs the JSSE package to come out a SSLSocket and SSLServerSocket.
The question is...
1. can i use NIO with JSSE included?
2. how to come out a java proxy server? is there any tutorial i can read through?
The scope is given as below
1) Proxy server
* perform tunning and keep the linking between file transfer host and client
* authenticate the file transfer client using CA certificate to establish SSL connection
* Once authorised, need to establish another SSL connection to host engine
2) File Transfer Manager at Client
* To initiate SSL connection to proxy server
* To open two type of connection: command and file connection
* The command connection is always keep alive
* For the file connection, the system required to re-open another connection after send file to host
* Auto-reconnect to server when the connection is down
* Re-handshake the SSL connection when the channel is inactive for sometime
3) File Transfer Manager at host
* To authenticate the proxy server and authorise the client before establish the connection
* Manage the connection
* request to client to open new connection (by sending command) when there is no file connection available to send file to client
* Request for re-handshake the SSL connection when the channel is inactive for sometime

Hi,
It is a new feature of SMB3 named SMB MultiChannel, which helps copy files through multiple NICs.
Detailed information please see:
http://blogs.technet.com/b/josebda/archive/2012/05/13/the-basics-of-smb-multichannel-a-feature-of-windows-server-2012-and-smb-3-0.aspx
As mentioned you can disable or enable it with following steps:
2.2. Disabling
SMB Multichannel is enabled by default and there is typically no need to disable it.
However, if you want to disable SMB Multichannel (for testing purposes, for instance), you can use the following PowerShell cmdlets:
On the SMB server side:
Set-SmbServerConfiguration -EnableMultiChannel $false
On the SMB client side:
Set-SmbClientConfiguration -EnableMultiChannel $false
Note: Disabling the feature on either the client or the server prevent the systems from using it.
2.3. Re-enabling
You can re-enable SMB Multichannel after you disabled it by using:
On the SMB server side:
Set-SmbServerConfiguration -EnableMultiChannel $true
On the SMB client side:
Set-SmbClientConfiguration -EnableMultiChannel $true
Note: You need to enable the feature on both the client or the server to start using it again.
If you have any feedback on our support, please send to [email protected]

Why incomplete HTTP Response by iplanet Proxy ( Few cases ) ???

Hi All,
I create a " HTTP CONNECT "connection through iPlanet proxy server, it works fine for few connection ,and fails for some.
Request
"CONNECT 192.168.0.67:443 HTTP/1.1\r\r\r\n"
Success Response
HTTP/1.0 200 Connection established \r\n
Proxy-agent: Sun-ONE-Web-Proxy-Server/3.6-SP5 \r\rn\r\n
Incomplete Response
HTTP/1.0 200 Connection established \r\n\r\n
Once i get a incomplete response , If i try to write data on the socket, it disconnects.
Can anybody explain, when do i get the incomplete HTTP response. If you need further info fell free to ask.
Regards,
Manjesh

I have configured iPlanet 3.6 on Windows 2003 server with admin port as 10000 and Client connection on port 8000.
I m Able to use client port thru 8000 but when i goto particular URL i.e http:\\I.P:10000 it do ask for admin user name aND password.. and after that it show "page cannot be displayed" .. where as if i try on same server to connect to admin panel thru netscape . once it ask the user name password for iPlanet and after that is keeps asking user name password in WINDOWS STYLE.. liek some time it ask for IIS .. i dont know why and overall i am not able to connect to it on admin port ..
pls provide some solution if any one have faced similar problem..

Oracle iPlanet Web Proxy Server 4.0.14 not getting started.

bash-3.00# ./start
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
ld.so.1: parsexml: fatal: relocation error: file parsexml: symbol __RTTI__1nMXMLException_: referenced symbol not found
Oracle iPlanet Proxy Server 4.0.14 B06/08/2010 05:46
failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /export/home/Oracle_Proxy/bin/proxy/lib/libj2eeplugin.so failed (ld.so.1: proxyd: fatal: libjvm.so: open failed: No such file or directory)
bash-3.00# uname -r
5.10
bash-3.00# uname -a
SunOS sunfire-v240 5.10 Generic_118822-25 sun4u sparc SUNW,Sun-Fire-V240
bash-3.00#
The web proxy server version is 4.0.14 and the package i used is "Oracle-iPlanet-Web-Proxy-Server-4.0.14-sparc.zip"
Please help me. If any other information is needed, please let me know.

Your proxy instance should start. The error you are seeing should only be for the admin server. Add the location of where your jvm.so is located to the LD_LIBRARY_PATH. The jvm.so is located under the JDK directory.

Install BootCamp update 4.0 on Windows 7 x64 returns error

Hello,
I have a problem updating BootCamp software on Windows. Updating from 3.2 to 3.3 or 4.0, from ASU or from manual installation, returns this:
https:// picasaweb.google.com/lh/photo/-w77Vf1cQrlarNb_LUz7fNct5nxxnOU3qWXwGpPvXwI?feat=directlink (spanish)
Basically, it says that I'm using a network resource that is not available, and tell me to pick a "BootCamp64.msi" file
If I set the file, it returns this:
https://picasaweb.google.com/lh/photo/_tqfhSNKK1wBmojjR7kWy9ct5nxxnOU3qWXwGpPvXwI?feat=directlink (spanish)
It says the file set is not valid msi for installing Boot Camp Services, and tell me to find a file called "BootCamp64.msi" on a folder ready to install Boot Camp Services
This for 3.3 and 4.0 versions.
In the log, it says...:
Info: Found Boot Camp x64 version 3.2
Info: BootCampUI failed to install 64 bit Boot Camp patch. The install returned 1603
Info: BootCampUI is exiting. The install returned 1
I know how to manually install the drivers, but what I want is update bootcamp.
Details:
SO W: Windows 7 x64 Updated
SO OSX: Mac OSX 10.7.3 "Lion" Updated
Mac: iMac 21.5" (Late 2010 I think) 500GB, 8GB RAM.
This problem appeared from the first day I installed Windows 7.
I also have a log file from de msi generated with the command "/l*v c:\log.txt",it doesn't make me happy to make it public, but I've attached.
Thanks,
Alberto Salazar
P.S. : I'm spanish, so my english might be difficult to understant. Sorry.

Uninstall Boot Camp
Run Microsoft Installer Cleanup Utility
Install 4.01
Sometimes you update by first removing the old version
You may want to run CCleaner as well.
CCleaner Optimization Cleaning
Start: run
Type: %TEMP%
Select All - send to Recycle Bin
Those two should be done as regular household cleaning maintenance
http://technet.microsoft.com/en-us/magazine/2008.08.utilityspotlight.aspx
The Windows Installer CleanUp Utility is designed to allow you to safely remove Windows Installer settings from your computer in the event of a problem. Although the Windows Installer is designed to be very robust, it is possible for Windows Installer to become damaged if:
Your computer's registry becomes corrupted
You or someone else inadvertently changes a registry setting used by the Windows Installer, resulting in a problem
The installation of a program that uses Windows Installer (for example, Microsoft Office 2000) is interrupted
There are multiple instances of Setup running simultaneously, or an instance of Setup is "blocked"
http://download.cnet.com/Microsoft-Windows-Installer-Cleanup-Utility/3000-18512_ 4-15905.html
FIXIT: The new utility that replaced Windows Installer Cleanup:
http://support.microsoft.com/kb/2438651/

[450 Transfer aborted. Link to file server lost] Followed Adobe Chat advise..still getting this message..

Since after trying four times this morning to log on to Chat support to continue working on this issue with them only to find chat it isn't working..I thought I would try here before I take a bat or some other item and disassemble my computer with it. Details on what is happening, what I have done, etc...
After updating my website using Muse the following happens:
I save my site.
I click FTP upload
Go through the first screens
Hit okay for upload
Pages load
Then uploading images begins…goes to either the first or third (61-62%) and stalls. After waiting for what seems forever..a new box appears.
Error:
Error uploading file loanimal2013.jpg. Click Resume to try again. If this problem persists, try again later.
[450 Transfer aborted. Link to file server lost]
Sometimes I can hit resume, the image will load immediately and it will continue for a more images then stops again.
Yet I have not gotten past about 74% or the 25th image before it or me stops as this is very time consuming. Time that I don’t have.
After speaking to an Adobe representative last week, it was suggested that maybe because my files were on an external that could be the issue and suggested relinking them. So, I did.
The process I followed was:
Go to assets
Right click Relink
Searched…Found corresponding image moved it to my local hard drive… then highlighted it in local folder…hit the Open button on the bottom
It returned me back to the original screen
I repeated this for all the assets
After relinking them…I saved the page…reopened it…tried uploading and it still having the same issues
After this didn’t work I contacted the host company and they checked to see if images could load by ftp and found no issues.
I am past frustrated at this moment, as I have been using the same method of saving and uploading for a few years now and suddenly I have this issue. And, I am not a technical person so I have no idea what else to do…if you can help it would be appreciated.

Since after trying four times this morning to log on to Chat support to continue working on this issue with them only to find chat it isn't working..I thought I would try here before I take a bat or some other item and disassemble my computer with it. Details on what is happening, what I have done, etc...
After updating my website using Muse the following happens:
I save my site.
I click FTP upload
Go through the first screens
Hit okay for upload
Pages load
Then uploading images begins…goes to either the first or third (61-62%) and stalls. After waiting for what seems forever..a new box appears.
Error:
Error uploading file loanimal2013.jpg. Click Resume to try again. If this problem persists, try again later.
[450 Transfer aborted. Link to file server lost]
Sometimes I can hit resume, the image will load immediately and it will continue for a more images then stops again.
Yet I have not gotten past about 74% or the 25th image before it or me stops as this is very time consuming. Time that I don’t have.
After speaking to an Adobe representative last week, it was suggested that maybe because my files were on an external that could be the issue and suggested relinking them. So, I did.
The process I followed was:
Go to assets
Right click Relink
Searched…Found corresponding image moved it to my local hard drive… then highlighted it in local folder…hit the Open button on the bottom
It returned me back to the original screen
I repeated this for all the assets
After relinking them…I saved the page…reopened it…tried uploading and it still having the same issues
After this didn’t work I contacted the host company and they checked to see if images could load by ftp and found no issues.
I am past frustrated at this moment, as I have been using the same method of saving and uploading for a few years now and suddenly I have this issue. And, I am not a technical person so I have no idea what else to do…if you can help it would be appreciated.

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

Windows Update does not work, Windows Standalone Update Installer stops with error 0xc8000247 (Windows 7 Home Premium on Acer Aspire 1810TZ notebook)

I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.
Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore.
I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.
I really would appreciate help.

I hit this same problem... I spent days trying to figure out what went wrong. MS advise of doing; Windows7 re-installs, BIOS/firmware updates, drivers changed, etc etc etc.
I installed a new(large) SEAGATE Momentus XT hybrid 750GB SATA drive upon newly purchased notebook, but the twist here is between the storage configuration mode in the BIOS, ATA vs. AHCI. See, the DELL BIOS required to configure my laptop storage for AHCI
mode, because I had the 4GB Intel Flash Cache Module (Turbo Memory) installed on the DELL Precision notebook. The Flash Cache is installed internally in the mini-pcie slot, loaded the Intel storage drivers, and when it works, is an outstanding feature which
supports:
Windows ReadyDrive*
Windows ReadyBoost*
Looking at the details of the Intel storage drivers that support the INTEL TURBO MEMORY, they're from 2009. Of course it was recommended by users to install these drivers first before anything else, so it would function best, but this was part of the
cause to all the problems with Windows 7. I've provided links to Intel Flash Cache info for those interested. Unfortunately, loading the HP/Intel Storage drivers fixes the Windows permissions/update problems, but "Breaks" the Intel Turbo Flash Cache
functionality now, even though Microsoft still supports ReadyDrive in Windows 7.
"Intel® Turbo Memory is a primary PC component, along with the CPU, chipset, and system memory. It caches large amounts of frequently used data or user selected applications for faster access by the processor. This decreases the need for hard-disk accesses,
saving both time and power, which equates to increased performance and energy efficiency. That's good news for users who run data-intensive software like media applications. It's also a good match to the substantial system requirements to load and run Windows
Vista*.
Intel Turbo Memory is a single solution that accelerates data transfer both to and from the processor."
Intel discontinued support for the modules or drivers with the marketing move to producing their own SSD storage drives.
WIKI: http://en.wikipedia.org/wiki/Intel_Turbo_Memory
INTEL page: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396715.htm
Intel Drivers/Support Turbo Memory: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396719.htm
For me, I hit all the symptoms everyone else hit and thanks to humphrey for his find. I just wish Microsoft/Intel would get together and fix this Windows 7 issue between SW/HW; Large Drive Sizes, Licensing/Permissions, Flash Memory, ATA vs. ACHI, BIOS, etc.
There's been an incredible amount of loss productivity, resources, and costs incurred on this one ISSUE by everyone involved.
Intel Member login for Mobility Turbo Memory Flash Cache pdf: http://www.intel.com/cd/channel/reseller/asmo-na/eng/products/mobile/mprod/turbo_memory/394947.htm

Application builder Error: Windows SDK function returned an error. (Error code -12) *** End Error Report

try to create an installer in Labview 8.6. The build fail and I got this message.
CDK_CreateNewWizard_Invoke.vi.ProxyCaller >> CDK_CreateNewWizard_Invoke.vi >> CDK_InstallerConfiguration_Editor.vi
>> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'NI LabVIEW 8.6.1 Datalogging and Supervisory Control Module' from:
D:\software\application\LabView\NI.LABVIEW\NI-Labview 8.6.1 DSC Module\ to: C:\Documents and Settings\Lidaoling\桌面
\Builds\generate waveform\My Installer\
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
Copying files...
Updating files...
Creating merged database...
*** Error: Windows SDK function returned an error. (Error code -12)
*** End Error Report
Done building deployment

Solution

RemoteUpdateManager "install updates returned statusCode:44, errorCode:7"

Hi all,
I've set up an internal Adobe Software Update Server and it works but one update(for InDesign) continually fails to deploy:
12/10/14 11:49:49:054 | [ERROR] | | AAMEE | Utilities | RemoteUpdateManager | | | 245368 | install updates returned statusCode:44, errorCode:7
12/10/14 11:49:49:054 | [ERROR] | | AAMEE | Utilities | RemoteUpdateManager | | | 245368 | *** Failed to install (AdobeInDesignCC2014-10.0/10.1.0.071) ...
I've tried rebuilding the directory with the AUSST tool twice and each time I get the same error.
Also, none of the "2014.1" updates for applications seem to be picked up by this tool, is this the expected behaviour? What's the point of the updater if it can't update Dreamweaver 2014.0 to 2014.1? (Versions 14 to 15).
Thanks in advance.
Sean

It seems a permission issue on destination folder. Make sure you have sufficient privilege on below locations.
WIN: C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory
MAC: Library>application support>Adobe>AAMUpdaterInventory
If error persist, please send the RemoteUpdateManager.log via private message from location below.
In Windows, the log file is in the %temp% location.
In Mac OS, the log file is in the folder ~/Library/Logs/.
Thanks,
Ashish

Windows xp update returned transfer aborted on iplanet proxy server 3.6

Similar Messages

Maybe you are looking for