Windows XP will not boot up, and only gives a blue screen on Qosmio F20

I am having a similar problem to this:
http://www.techspot.com/vb/topic26409.html
The only solution to this is to reinstall/repair Windows XP Media Centre Edition:
http://www.techspot.com/vb/showthread.php?t=8356&highlight=windows+repair
This consists of reinstalling ONLY Windows (without formatting) the Recovery CD supplied with my computer cannot do this. I really do not want to format my computer, and being a sealed unit I do not want to remove the HDD from the laptop.
How can I carry out the process above with my current copy of Windows XP Media Centre supplied with the computer on the Recovery Disk?
Thanks in advance.
[Edited by: admin]

You could try to repair the OS using the XP repair console.
But the Toshiba recovery CD does not contains such console because its not a original Microsoft CD but it contains only a image files.
So if you want you can remove the HDD and connect it via external USB HDD controller to another computer.
Then you could get access to the HDD and could save all important files.

Similar Messages

My iMAC 24 will not boot up, I only get a blue screen

My iMAC 24 will not boot up, all I get is a blue screen. I loaded my install disk but the problem remains the same.

Failed hardware, take it in for service.

My operating system will not boot up and I have a black screen

My laptop just went black as if it was in stnd by mode yet now will not boot up. It gets to the wirl of the fans and the cd drive turning but that is it. I m running the BIOS Test and nothing is showing up. the screen is black with a single dash flashing. can someone help me please as my tech is not that good

Hi @RK3
Welcome to the HP Forums!
It is a great place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that your display just went black. If you restart the display remains black with a blinking cursor, but with no error messages. You do hear the fan and hard drive spin up.
Here are two links to assist you with this difficulty.
Troubleshooting problems with notebook displays (Windows 8, Windows 7)
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Macbook will not boot. Locked hard drive. Blue screen when booting

Hi, my little brother decided he wanted a few files off of my mac book, so he went to settings>sharing>file sharing and added my only hard drive to the list and tried removing everyone but his name and password thinking it would only effect people trying to log into my hard drive, not actually me on my computer alone trying to boot mac osx from it.
He came crying to me telling me he paniced because he saw a locked icon on my hard drive and couldn't do anything, so tried to restart the macbook and now i just get a blue screen and nothing happens when i try booting it.
Right now i'm thinking i gotta archive and reinstall from booting the osx disk, but i'm affraid it'll just apply the same settings again and keep me locked out. I need files off of my hard drive since i'm in school and have several assignments that i have not backed up at all.
Any help would be greatly appreciated

after searching the forums deeper i found the solution. it's now working. you may delete this thread.
http://discussions.apple.com/thread.jspa?messageID=2087835

I changed the cracked screen on my 3gs, and screen works but it will not boot up and go past the Apple screen.

I tried recovery at least three times, and it says that it can not complete the activation at this time. I did take my Sim card out and try as well, because I had to use it in my old phone. I reopened the phone and double checked that everything was plugged back in from the screen change. What went wrong??? I restored it before and everything worked fine. It's not hacked or jailbroke, so I don't know what's going on???? Please help!

Yes, i did. I bought a screen repair kit and it was very simple to change. it works, but its stuck in recovery mode...

It rained in my window last night, on my power strip. My macbook adaptor (charger) and iphone adaptor were both plugged into the strip. The power strip is dead. Iphone is fine. Macbook will not boot up and charger light doesn't go on.

It rained in my window last night, on my power strip. My macbook adaptor (charger) and iphone adaptor were both plugged into the strip. The power strip is dead. Iphone is fine. Macbook will not boot up and charger light doesn't go on. I borrowed another charger and still no luck. What should I do? (Charger wasn't plugged into Macbook until I dried it off.)

Spill Cleaning
And, don't think that just because it was two teaspoons and not a glassful that there is a difference.
Some liquid has just spilled into your Mac. What should you do?
Do
Immediately shut down the computer and unplug the power cord.
Remove the computer's battery (if you can)
Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
Note what was spilled on your Mac.
Bring the computer into an Apple store or AASP as soon as possible.
Don't
Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
Don't shake the computer (this will only spread the liquid around).
Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).
Do not put in a bag of rice in as much as rice will get into the ports and optical drive and do further damage.

Windows 8 will not boot

Windows 8 will not boot, gives Bad_System_Config_Info error.
It will not boot from disk, let me refresh, or let me reset my windows system.
A couple of times i have gotten windows to boot from the disk and it asks if i want to instal windows 8 or there is a tab to repair my computer.
Should i just go ahead and click instal windows 8, and then backup that fresh instal with my backup drive?
Or will this complicate the problem?.........
I am running OS X 10.8.3 Macbook pro retina
Thanks
Todd

Wow, how about you guys just answer the dude's question instead of posting useless garbage. thanks for wasting everyone's time.
The only way I know of fixing this right now is unfortunately by doing a clean install. Thats not to say however that you won't run into the same problem down the road. To be honest, even tho Templeton's answer was useless, he's right. Seven is currently way more stable.

Windows xp will not boot up after installation of desktop software 4.3.

windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???

I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

Satellite Pro M10 will not boot again and comes up with the error message

My Toshiba Satellite Pro M10 notebook will not boot again and comes up with the error message "load error" when I push the power button.
The problem arised after installation of "symantec system works" and trying to restart windows XP professional to make the installed program executable.
What can I do to get the notbook restart again?

Hi everyone
If you cannot acces to the boot menu by pressing F8 you can try to recover the the master boot record from Windows Xp professional installation Cd, to do this:
Attention: don't run these commands if you have more than one operating systems running in your laptop.
Boot from Windows Xp installation cd
Choose repair installation from console by pressing "C" key.
A console will open asking you for administrator password, insert the password and press enter.
Run de command: FIXMBR (It will write a new boot record)
Run de command: FIXBOOT (It will write a new boot file)
Restart the laptop and now windows should start without problems.
Regards

Will not boot up and fans run at high speed

will not boot up and fans run at high speed

after much head scratching I ran the hardware test disk from cd. The test showed a memory issue I eliminated the faulty one systematically. So it wasn't a hard drive or software problem in the end it was faulty memory. What was misleading was the computer telling me there was a fault on the hard drive. The machine works fine now. Thanks to people's comments I learned a bit more about the G5 that helped eliminate probable causes

Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.

My Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it. I've tried Option key, and Control S keys and it still will not boop up. Can anyone help?

If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or later:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

IMac will not boot up, all I get is white screen help

MY iMac will not boot up, all I get is white screen?
what do I need to do to start machine please?

Start with a google search for white screen site:apple.com and peruse the many hits.

My Mac pro will not boot. it gets stuck on the grey screen.

My Mac pro will not boot. it gets stuck on the grey screen. What can I do?

Mac OS X: Gray screen appears during startup
If using 10.7 or later, the Installer/Utilities DVD has been replaced with a special emergency partition on the Hard drive called "Recovery_HD"

My iPhone will not turn on after a yet another blue screen of death. Please help!

As mentioned above, my phone will not turn on after a yet another blue screen of death. All of a sudden it turned off, and it wouldn't turn on for quite some time, even after I plugged it in the charger. It wasn't long after the screen turned on, but it only displayed a bright black. I decided to turn it on and off a few times. Nothing worked.
I have also tried to call the phone from another one. It was as if the phone was simply off.

Hello ZarinaUrum,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPhone.
iOS: Not responding or does not turn on
http://support.apple.com/en-us/TS3281
Cheers,
Allen

Windows XP will not boot up, and only gives a blue screen on Qosmio F20

Similar Messages

Maybe you are looking for