Windows XP won't recognize built-in wireless AFTER installing the drivers.

Hello,
I have an iMac, post leopard release.
So I ran Bootcamp, everything went well, and windows XP runs fine. I used an XP Pro edition with SP2 and all of that is in order. I initially used a Leopard Install DVD of my friends to install the drivers, because I couldn't find the disk that came with my mac, and that worked until it got the wireless components, and then would crash windows.
I then found, luckily, and put in the Mac OSX install disk that came with my mac and that installed the drivers.
(or at least I think it did, it sure looked like it was, but afterwards it seemed as though all it did was install a program called Bootcamp that helps with running dual systems on a Mac.)
But XP wont pick up any wireless networks on the page where you can manage your networks. It's as if I have no built in wireless.
I don't know if you have to actually set up the built in wireless to work with windows, or if the disks I put in actually didn't install the drivers. but I'm starting to go insane...
(on one last side note, my wireless mighty mouse and wireless keyboard won't connect in XP either, BUT only after I used the Mac OSX install CD.... it's very strange....

Any luck on the wireless issue? I too have a MacBook Pro that accesses the wireless internet with no problems on the Mac side. That is not the case on the PC side, using the Windows XP Professional. I can not access any internet, wireless or hardwired directly into the router. As a matter of fact, the Internet Wizard runs on the PC side and ends saying error.
I've contacted my internet provider, who walked me through the process to create a new internet account, still no luck. Ideas would be wonderful seeing that I have a single piece of PC only software I am trying to use for some charity work.

Similar Messages

MacBook Pro won't recognize Canon MP800, even after reloading print drivers

Time Warner Cable updated servers. We had to update the DNS address for the MacBook Pro to maintain internet access. After doing this MacBook Pro doesn't recognize the Canon MP800 printer - shows no print drivers for Canon IJ Network , even after reinstalling printer software and downloading print drivers from Canon website - MPNavigator 2.0 keeps saying print driver has not installed. The MacBook is wirelessly networked with the printer and an EMac. We haven't updated the DNS address for the EMac because it still recognizes the printer and prints; however, we now don't have internet access with EMac as a result.

If printing wirelessly check your printer sharing settings - System Preferences/Sharing
If printer is connected directly to your computer, check your printer connections, read the troubleshooting section in your printer manual and check the printer manufacturer website for drivers you may need to update.

My computer won't recognize my ipod anymore. after all the trouble shooting i don't have an apple mobile device driver how do i get one?

Please help me! my computer no longer recognizes my ipod. After troubleshooting for 2 days i think I need an apple mobile device driver. How can I get one?

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

My HP laptop with windows 8 won't recognize any library with home sharing; although the other computers do.

My HP laptop with windows 8 won't recognize any library with home sharing; although the other computers do.
I've tried activating and deactivating home sharing multiple times, any other reason why this is happening?
Thanks

A couple of other things you might like to try :-
- Determine whether you are able to access the internet from anywhere else on your new PC (e.g. do Windows updates download ? Can you access the Windows 8 store ? ) If the answer is no, then your problem doesn't lie with IE but with the actual wireless connection. If the answer is yes, then continue as below.
- Run IE from the desktop instead of the Start screen - probably won't make any difference, but worth a try.
- Download a decent browser like Firefox or Chrome and try that - this will show whether the problem lies just with IE or not
- As a general rule, don't do anything that PC World tell you to do, lol !
As gg30340 says, this does sound very much like it MAY be a problem with firewall settings - if you're running Norton Antivirus then I believe that will be providing the firewall service, rather than the inbuilt Windows firewall.
One thing you don't need to worry about - Windows 8 is a perfectly good OS and works just as well as Windows 7 did. I'm using it now !

Windows XP won't recognize my Zen Touch. Please he

Hi,
I jusy got a ZT and I did a full installation from the included disk. But I cannot get either Nomad Explorer or Creative Media Source to recognize my player. In Nomad, it has a Not Connected icon in the working area, and in CMS, the player is not present as a choice in the menu on the right side of the screen (where the PC music library drop-down is).
I've tried to re-install AND update the drivers in Windows. But Windows cannot seem to find the drivers even though the CD is in my CD player. I've also tried to install the drivers from Creative's website, but it tells me I need to be logged in as an administrator, and Windows seems to indicate that you really shouldn't do that, so I didn't pursue it.
When I tried to install the firmware update from the Creative website, it also says my player is not connected. So that didn't work either.
I am running Windows XP Home Edition if it matters.
I did not have the player connected when I installed the software. But just to be safe, I uninstalled everything, restarted my machine, and then reinstalled all the software and restarted again. This didn't help.
Does anyone have any idea what I can do? I cannot use the player because I cannot get any music in it (and I don't like the classical that they already loaded).
Thanks!!!!

PS. Notmad doesn't recognize the player as connected either. I cannot manually connect it in Notmad Manager.
I have not disconnected and reconnected my USB hub as I read someplace as a suggested fix (don't know how to do that). And I have not logged on as an admin and tried to reinstall the drivers (don't know how).
Before I bought this thing I read all the horror stories of the software it came with and whatnot, but I never imagined the nightmare it would actually be. I've been installing hardware and software on this computer for three years and not one conflict or crashing program has ever occured. I can't believe you have to be an IT expert just to use this stupid little toy. End rant!
Thanks again for the suggestions.

I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." Please help.

Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error w

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error writing to file: c:\Config.Msi\feea.rbf. What do I do?

Hi Beverly ,
Please refer to the following and see if this helps.
https://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
Regards
Sukrit Dhingra

Windows Update installed the drivers for the wrong sound card?

I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

TS3824 My iMac won't wake from sleep after installing the most recent OS update.

I'm having trouble with my iMac, the screen won't wake up after it goes to sleep. The one time it did the screen was all fuzzy and pink. This has only happened in the last few hours after installing the latest OS X Lion update. Is this normal? Can someone help?

Hello, not normal.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.
Re-install if that doesn't work.

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5

After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5

if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp

Itunes doesn't recognize iphone sim card after installing io5

I sent hours trying to upgrade my Iphone 3gs to io5 and now Itunes doesn't recognize the phone sim card, I only have a message saying 'There is no sim card in the Iphone you are trying to activate'. Iphone is no longer under warranty, so I don't know what to do if doesn't work any more.
Any advice very welcome Thank you!

Same problem with my 3GS :
Impossible to activate IOS 5 because itunes say "sorry there is no sim inside"...
I tried everything and the problem is found on many forum. many people can not activate their iPhone after installing the update.

After installing the most recent iTunes update/version iTunes will no longer run on my PC. I receive a window with the Microsoft error code R6034

After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7). I receive multiple error windows with the Microsoft error code R6034. Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest". I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted. The site instructs the viewer to contact the application developer.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
The system shows everything is ok.
Please any help greatly apreaciated.
Thank you
Valentin

ValentinT, welcome to the forum.
There are no drivers available for Windows 8. I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected. It seems that the Sound is one area that gets changed when updating to Win 8.1. At least, this is what happened to me.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Windows XP won't recognize built-in wireless AFTER installing the drivers.

Similar Messages

Maybe you are looking for