Windows7 64-bit can not detect my creative sb live 24-bit 7.1

>windows7 64-bit can not detect my creative sb li've 24-bit 7. windows7 can not detect my creative sb li've 24-bit 7.
I tried every thing
updated my bios
tried in device manager
tried in any mode you like
tried to install the latest drivers that support windows7
but windows 7 64-bit's actually can not see any sound card install in pci
while windows XP and Vista and and and can see the card and work just great
just cant
Microsoft says its creative problem
creative says it is microsoft problem
I dont care whos problem is this
Just want my card to work
Dont ignore this thread cause I am not the only one who suffer this problem .
any one knows what to do? what is the problem?
is there any problem between creative and microsoft that I am paying the price for their problems.
Just tired and want the solution

I tried every thing
updated my bios
tried in device manager
tried in any mode you like
tried to install the latest drivers that support windows7

Similar Messages

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

WRT54GS Can not detect the router

We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router. I am using the router to access the internet and it can't be detected???
I have powered it off enough times and then some and need to get this running to use the laptops.
I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
Thanks

okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

Creative MediaSource not detecting my creative zen to

I'm having trouble with my Creative Zen Touch. In Creative MediaSource, in the sources part on the left hand side, it does not detect my Creative Zen Touch and therefore i cannot transfer music. Any help would be much appreciated. PS when i plug my Creative Zen Touch into the computer using the usb port, the computer detects the device and i have an option to "take no action" or "Transfer files using Windows Media Player".

I am also having this problem, but in order to download from the zen to the pc, I will have to have everything erased off the Zen, and there is an important recording I want to load to my PC first. There is no where in my creative media source since I updated my firmware to load from Zen to PC like there used to be. Any suggestions?
Thank you.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

Guys I really need your advice please...
I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
Thanks in advance.
ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

rzulfikar wrote:
Thanks Chris for your solution.
But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
The problem is not about upgrading an iPhone to a newer version of iOS. Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes. You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it. Your choice, your decision, your consequences.

I have put my documents on creative cloud preview and now I can not open the creative cloud preview window open and I have nothing in my creative cloud app

I have put my documents on creative cloud preview and now I can not open the creative cloud preview window open and I have nothing in my creative cloud app

The license allows YOU to install on a 2nd computer... it does not allow someone else to use your license
Licenses and terms of use | Adobe
You may also not purchase an Education version for someone, they must do that for themself... if they qualify
Adobe Education... Start here https://creative.adobe.com/join/edu
Education Plan https://creative.adobe.com/plans?plan=edu
One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
ID Proof http://www.adobe.com/store/au_edu/academic_id.html
I do not know how it is done, but you MAY be able to buy her a regular subscription and pay with your credit card... just not the Education version that has strict requirements

Airplay can not detect apple tv

Airplay mirroring can not detect apple TV.
I upgraded to mountain lion this morning and the air play icon appears on my macbook pro but it can not detect my apple tv. Apple tv is running 4.4.4 gen 2.
Any ideas?
Here's the interesting part, when I disable airplay on the appleTV the icon on my macbook disappears and vice versa.

4.4.4 is old. It may be the reason but I can't confirm as my AppleTVs are 5.0+ and none of my Macs can Airplay.

My i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens. What should I do?

my i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens.
What should I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My LR 5.7.1 running on Windows 8.1 64-bits can not edit a image on PS CC 2014...

My LR 5.7.1 running on Windows 8.1 64-bits can not edit a image on PS CC 2014...

This will happen if you are in the Library Module and viewing images in the grid but you do not have any photo file selected. Select an image and the options should be available. see the screen capture.

I can not download in creative cloud

Hi!
I can not download in creative cloud! Every time I try, creative asks for password (although I am alreadt logged in), I write the name and password. It says , you have logged off. Try again. Choose to download PS CC. Again click in button download - asks for password - you log off - and so on!
Second point: my PS CC is now in evaluation mode! Why?
Thanks for your help in advance. Still 28 days of PS CC to go!
Jose Paulo Andrade

Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

Can not detect wireless card

WRE54G / Win XP SR2
My laptop and PDA can connect to the network wirelessly with no problems.
Trying to connect my WRE54G to my network. On every attempt at AutoConfigure nothing happens. Have disabled router security and 'SPI Firewall' (whatever that is). Still nothing. Have disabled router security and 'SPI Firewall' (whatever that is), and McAfee Firewall. Still nothing. I have moved the WRE54G to within ~4 feet of the router and tried everything again. Still nothing.
I have tried Setup but when I hit 'Next' I get the popup "Can not detect wireless card."
Have tried a reset and have unplugged/replugged the WRE54G. FWIW, the WRE54G 'Link' light blinks blue once for about a second and turns a constant red. The 'Activity' light blinks blue twice quickly about every 5 seconds. Nothing on my PC shows any response.
What is the wireless card that can't be found? The WRE54G?
How do I resolve this?
33#44

this worked for me too. Although I was never able to use the cisco install wizard successfully. I am using WEP security on my access point. I took the following steps.
1. From laptop, connect to network wirelessly with WEP security settings in place
2. From laptop, open browser, go to: 192.168.1.1, select wireless security, disable wireless security
3. From Range Extender, hold auto-configure button. It took me multiple attempts (~5) and it connected so the 'Link' light changed from red to a consistent blue.
4. From laptop, disable security for the access point (via control panel, wireless network connection settings)
5. From laptop, connect to wireless access point (via control panel, wireless network connection settings). test internet connection. Internet should work.
6. From laptop, access range extender web utility. open browser, got to 192.168.1.240, enable security, input desired WEP security settings/passphrase.
7. From laptop, enable wireless security for the access point. from browser, go to 192.168.1.1, select wireless security and enable it. use the same settings from step 6 (from the range extender).
8. From laptop, update wireless adapter settings to connect using the same security settings (eg. passphrase) from step 6/7.
range extender, access point and wireless adapter/laptop should all be connected.

TS1589 when I open airport utility it performs a scan and then say it can not detect a wireless device. The rest of the screen is blank; all menus are blanked out. What do I do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

I can not install adobe creative standards because the install icon has the symbol of the ban. What can I do?

I can not install adobe creative standards because the install icon has the symbol of the ban. What can I do?

Its a possibility that the product is not supported on your machine hence the BAN sign on the product icon. You can share the product name and your system configuration so that we can confirm the same.

The operating system can not detect my wireless device!

Hi all,
I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Windows7 64-bit can not detect my creative sb live 24-bit 7.1

Similar Messages

Maybe you are looking for