Windows7 64x can't detect soundcard

upgraded windows7 64x from 6gb to 8 ,and now it dosen't detect my souncard (sound blaster fatalty)
any help pls... i have upgraded my drivers and nothing

What version of iTunes?

Similar Messages

  • Windows7 64-bit can not detect my creative sb live 24-bit 7.1

    >windows7 64-bit can not detect my creative sb li've 24-bit 7. windows7 can not detect my creative sb li've 24-bit 7.
    I tried every thing
    updated my bios
    tried in device manager
    tried in any mode you like
    tried to install the latest drivers that support windows7
    but windows 7 64-bit's actually can not see any sound card install in pci
    while windows XP and Vista and and and can see the card and work just great
    just cant
    Microsoft says its creative problem
    creative says it is microsoft problem
    I dont care whos problem is this
    Just want my card to work
    Dont ignore this thread cause I am not the only one who suffer this problem .
    any one knows what to do? what is the problem?
    is there any problem between creative and microsoft that I am paying the price for their problems.
    Just tired and want the solution

    I tried every thing
    updated my bios
    tried in device manager
    tried in any mode you like
    tried to install the latest drivers that support windows7

  • Help!!! Itunes and Pc can't detect my Ipod Touch 4g

    I tried everything that Apple Support told me to do and still can't detect my ipod touch 4g. Still stuck at apple boot logo, tried DFU mode and Recovery, still can't be detected by PC or Itunes. What to do? I need Help Badly.
    When i connect my ipod, no sounds pops out but it opens and charge still stuck at boot logo.
    I'm running Windows7 ultimate.
    Some told me to connect it to a Mac Book, is it possible that it can be detected on a mac book? Because i only tried connectin it to other Windows PC with XP, Vista and still haven't got anything. I don't thinl it's a hardware problem cause my ipod just run low on battery and i restarted it and then It got stuck. xD

    - Yes, another computer may help.
    - Next try disconnecting from computer/charger and let the battery fully drain.  Then charge and try again.
    - Last, make an appointment at the Genius Bar of an Apple store.  If defective, they will give you a replacement under your warranty.

  • DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

    I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
    Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
    I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
    When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0005h (I/O Access, BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h Unknown
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 0000A800h
    System IRQ 5, INT# A
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
    Vendor 02h Creative Labs
    Device 0002h EMU0K Audio Chipset (SB Li've!)
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 04h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 002002h CT4850 SBLi've! Value
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00009000h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 7002h PCI Gameport Joystick
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 0h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Input, type Other
    Subsystem ID 002002h PCI Gameport Joystick
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008800h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008400h
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    (Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
    So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
    I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
    I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
    Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
    Cheers,
    Russ.

    Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
    The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
    Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

  • APPLE/DEVS Read this! Windows 7 CAN'T detect the iPhone 5s but iTunes CAN detect it! WEIRD, huh?!..

    just a summary...
    i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
    now, back to the topic..
    so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
    so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
    i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
    the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
    so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
    so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
    and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
    so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
    Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
    i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
    so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
    "4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
    If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
    so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
    after reinstallation of itunes my DVD drive can be seen and just  noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
    so going back to the topic..
    i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
    so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
    so now i opened iTunes and BOOOM!
    iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
    so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
    so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
    Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
    if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
    [for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
    and then you will see the screen below
    click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
    BUT the problem here is that your iPhone can't be detected on iTunes...
    now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
    click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
    SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
    i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
    PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
    Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.

    Hi LSGZ,
    If you are having issues updating or restoring your iPhone, you may find the following article helpful:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Regards,
    - Brenden

  • Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.

    Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.I restore it and then it works for a while, but then a couple weeks later I'll plug it in and I get the same message again. It's very frustrating because even though I have all the settings to save to cloud, my apps and data don't all come back.

    Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

  • My Macbook Pro can't detect or read my CDFS file system external HDD

    My Macbook Pro can't detect or read my CDFS file system external HDD

    Open Disk Utility and see if the USB drives show in there. If they don't then it is a USB port or bus problem. If they do show in disk utility are they formatted in either Mac extended or a Windows format?

  • How can I detect a dialog and respond?

    I'm having trouble doing something that's probably not that hard. I'm trying to "Print to PDF" a bunch of old AppleWorks documents. When you open a document created in AppleWorks v6 it opens right up, but when you open a document created in AppleWorks 5 you get a dialog box that says, "This document was created by a previous version of AppleWorks. A copy will be opened and "[v6.0]" will be added to the filename."
    Right now I open the file and then:
    tell application "AppleWorks 6"
            activate
            repeat while not (exists front document)
                    delay .2
            end repeat
    end tell
    When the dialog box pops up, there's no front document so the whole thing freezes until you hit OK. How can I detect this dialog box and dismiss it?
    Thanks
    PS
    When the box is open I ran this and got this result:
    /usr/bin/osascript -e 'tell application "System Events" to get properties of windows of application process "AppleWorks 6"'
    minimum value:missing value, orientation:missing value, position:436, 153, class:window, role description:dialog, accessibility description:missing value, focused:missing value, title:missing value, size:412, 123, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXDialog, selected:missing value, name:missing value, description:dialog, minimum value:missing value, orientation:missing value, position:8, 76, class:window, role description:floating window, accessibility description:missing value, focused:missing value, title:Starting Points, size:631, 189, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXFloatingWindow, selected:missing value, name:Starting Points, description:floating window, minimum value:missing value, orientation:missing value, position:4, 22, class:window, role description:floating window, accessibility description:missing value, focused:missing value, title:Button Bar, size:612, 51, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXFloatingWindow, selected:missing value, name:Button Bar, description:floating window

    Hi,
    The simplest would be to set the application preferences in the script.
    Like this :
    -- *** set prefs ****
    tell application "AppleWorks 6"
          activate
          set oldPrefs to its preferences
          copy oldPrefs to tPrefs
          tell tPrefs
                set old version warning to false --doesn't show the old version warning alert  
                set converted file suffix to true -- append “[v6.0]” to documents converted from older formats
                set locked file warning to false
                set paint reduction warning to false
          end tell
          set preferences to tPrefs
    end tell
    -- *** end set prefs ****
    --**** your script, example ***
    set tfiles to choose file with multiple selections allowed
    tell application "AppleWorks 6"
          repeat with i in tfiles
                open i
                tell front document
                      -- do something
                end tell
          end repeat
    end tell
    --**** end  your script ***
    -- *** reset prefs ****
    tell application "AppleWorks 6" to set preferences to oldPrefs

  • How can I detect a certain text within a field within CASE using IF

    Dear all,
    for a transformation / generation of values receiving from R/3 into BW I try to
    manupulate three fields. I have a problem detecting a string in a field.
    I am using a CASE with several WHEN clauses on one field. Depending on the
    value, an IF is integrated. There I look into another field evaluating, if it contains
    a certain string. E.g. IF STRING CP 'xyz' OR 'abc'.
    System gives error for the locigal expression. I also tried CS, but same error.
    How can I detect a certain text within a field and which is the right logical
    expression.
    Many thanks in advance!!!
    Claudia

    Hi,
    Folow the blow example...
    May be it helps....
    DATA: hex1 TYPE string,
          hex2 TYPE string.
    hex1 = 'FFFF'.
    hex2 = '123FF'.
    IF hex1 CP hex2.
    ENDIF.
    Cheers,
    SImha.

  • How can i detect if my PC is not on Network..... Urgent Pls Help Soon !!!!!

    Hello Everyone,
    We all know whenever we try to connect to a PC which is not on network, we get UnKnownHostException etc..... by which we can detect that the corresponding PC is not an network(intranet/internet)
    But when i send a msg from my PC to my PC, it works fine even if the network is down. I hv provided my PC's IP address instead of using localhost or 127.0.0.1 which reduces the possibility that the msg will not be traversed thru the network.
    Any IDEA how this works.
    Is There any possible way by which i can detect that my PC is not on network or the PC to which i'm trying to connect is not on network .......
    Pls help me out, its really urgent as to be implemented in my Project
    Thanks In Advance
    Sahil Shaikh

    Hello Surtee
    I have developed a Messeging Service for the eCRM Apllication my company is developing and we r in the final stage of debugging.
    Now whenever a user sends a msg to a PC which is not on network, the messaging service automatically sends an Offline mssg to that PC. But know i want ot distinguish wheather the PC to which i'm sending the msg is not on network or am I not on network based on this i need to perform diff. actions, hence i wanted to know that how can i detect .......
    Pls see if u canhelp me out ......
    Thanks
    Sahil Shaikh

  • I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

    I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

    Hi jstutsman,
    If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
    iPod not appearing in iTunes - Apple Support
    Regards,
    - Brenden

  • Skype can't detect sound card

    Skype was working just fine previously when making a video call (could hear the other person well - no problems.) Then I stopped using the monitor stereo speakers and installed desktop speakers.
    Wasn't happy with them and uninstalled them about a day or two later. When I tried to make a video call again (after choosing monitor speakers again under the pc control panel - sounds and audio devices, also tried to choose monitor stereo speakers in Skype but didn't see this option) - there was no sound - even on the Skype test.
    So I tried "check settings" and saw under speaker - "can't detect your sound card". Under adjust speaker settings there's no speaker suggestions at all - it just says none.
    I also cancelled the speaker setting on SoundMAX digital integrated audio under the control panel.
    I have rebooted the system but still the same problem!

    I'v sorted out the problem. Sorry for the inconvenience!

  • JMF-based applet can not detect audio devices on Vista (?)

    Hi,
    As many people reported, I encountered the same issue - CaptureDeviceManager.getDeviceList does not detect any audio device on IE/Vista.
    Here is my testing environment:
    HP XW4600, RealTek HD Audio onboard sound card,
    Vista SP1 (Business, Home Premium, and Vista64)
    JRE1.5.0_16, JMF2.1.1e
    A recording Applet runs in IE7 (which works fine on XP and its Java application version always works fine on Vista)
    I have tried a number of things without success:
    1)Use different audio formats as the input parameter for getDeviceList
    2)Try CaptureDeviceManager.getDevice(new String("DirectSoundCapture"))
    3)CaptureDeviceInfo info = new CaptureDeviceInfo(com.sun.media.protocol.dsound.DataSource.NAME,new MediaLocator("dsound://"),null);
    4) Vector devices = (Vector) CaptureDeviceManager.getDeviceList(null).clone();
    5)Uncheck UAC(Vista User Access Control)
    6)Set IE settings least restrictive
    7)Try signed or unsigned recording Applet
    8)Pack the recording Applet to a jar and deploy to JRE\lib\ext
    9)Run JMFInit and copy the files in JMF\Lib to System32 folder
    On a few occasions, audio devices can be detected. For examples,
    10)Upgrading an HP XW4200 (XP machine with AC�97 codecs driver) to Vista,
    11)1/5 chance on the machines with both Sun JRE and MS Java SDK installed.
    12)Trying Item # 9. it worked once on one machine, but after rebuilding the machine, the same trick does not play.
    I am wondering if there is a way to let JMF-based applets detect audio devices on Vista or this is an inherent problem with JMF, IE and Vista.
    I would appreciate it very much if you�d kindly offer any help and suggestions.
    -Belfield

    >
    As many people reported, I encountered the same issue - CaptureDeviceManager.getDeviceList does not detect any audio device on IE/Vista.>(..in an applet)
    >
    I would appreciate it very much if you'd kindly offer any help and suggestions. >I suspect the basic problem here, is the installer that defaults to preventing the applet access to record sound (I am guessing that would 'spill over' into web-cam permissions). A quick test of that is to try the same code as an application.
    If the application works, one possible fix is to launch the application using webstart. Webstart will work from a web page, and offers many other advantages over a standard applet.

  • Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

    Hallo,
    Can someone help me with this issue?
    I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
    I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
    So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
    What to do????
    It is something special with the DVD that i have from Toshiba ?????
    Thank you very much.

    Hi
    > I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
    So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
    The whole issue is really mysterious. In my opinion there are two options;
    Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
    Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
    If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
    Furthermore I found you second posting in other thread
    http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
    and I think more and more that this must be an graphic card issue.

  • FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

    FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
    It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

    Hi Bob,
    Thanks for the advice. It succeeded.
    The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
    Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
    Finally...
    Sytze

Maybe you are looking for