Windows7 and boot camp, can it be reversed?

I like the new Windows7, but I'm still afraid of any Windows product screwing up my Mac.
If I decide, or if I start to have issues with Win7, can I delete all files and folders of the OS?
Thanks

If I decide, or if I start to have issues with Win7, can I delete all files and folders of the OS?
Yes. Use the Boot Camp Assistant to return the drive to a single partition setup.
(48501)

Similar Messages

Word for Mac and Boot Camp, can I run Word for Mac while running Windows?

Hi There :
I just installed windows xp on my mac book pro. I have Word for Mac already installed. Is there any way by which I can use this Word software while I am running Windows.
Thanks a lot

You'd need to install a virtualization product, such as VMware Fusion or Parallels Desktop for Mac. This way, you'd be running Windows alongside Mac OS X. I use VMware Fusion and recommend it. For resource-intensive applications, I boot natively into Windows, but I generally use the virtual machine for convenience sake.
Bryan

Enabling 'File Sharing' on my Mac allows my Macintosh HD and Boot Camp to be visible and writeable on my home network. How can I turn this off, so that only folders/files I share are visible?

So I've been trying recently to get my MacBook Pro connected to my home network. There are two other desktop computers in the household, and I'd like to be able to connect to their shared folders, as well as allow them to access shared items on my MacBook Pro. I think I've read all the documentation regarding this issue on the Apple Support site. I do have administrator privileges on my Windows 7 computer.
Issues connecting from PC to Mac
A couple of days ago, I enabled SMB File Sharing on my MacBook Pro, and in addition to the already shared Public folder, I added another that resides within Movies. Then I went to my Windows 7 PC, and under Network, my MacBook Pro appeared. I double-clicked on it (I cannot remember if I was asked to enter my Mac user credentials; I think I was), and I saw the two shared folders: Public, and the Movies folder.
However, today I went back to my Windows 7 PC, accessed my MacBook Pro, entered username and password, and in addition to the two shared folders, both my Macintosh HD and Boot Camp HD appeared as shared folders, both fully writable. However, under File Sharing on my MacBook Pro, only the two shared folders (Public and Movies) appear in the Shared Folders list.
How can I prevent my Mac from sharing my entire partitions? How can I configure it so thatonly the folders I select to share are actually broadcasted across my home network? Also, it would be ideal if I can access these shared folders from my Windows 7 PC without having to enter my Mac user credentials.
Issues connecting from Mac to PC
I have a user account on my Windows 7 PC with the same name as my Mac, but with no password. When I try to connect to my PC from my Mac, the enter credentials dialogue pops up and asks me to either log-in as a Guest, or enter my User credentials.
The Guest account is disabled on Windows 7, and I assume that's I'm not able to log in as Guest (if it is possible to connect as a Guest without having to enable the Guest account on Windows 7, please let me know). Leaving the password field blank on the enter credentials dialogue tells me that it's incorrect (even though I don't have a password on my Windows 7 account).
Is it possible to access shared files and folders on my Windows 7 PC from my Mac without having to create a password protected account? If not, is it possible to create a password for the sake of accessing shared files, while not requiring it to log in to the account? I'm sorry, I know this last bit more falls under the category of Windows Help.

Sharing files from a Mac to a PC is a different animal. I've never done it myself so you may want to repost a separate question on this topic.
From what I understand, in order to access files from a Mac on a PC, you must log in using your Mac username and password (no anonymous file sharing). Since this is not very desirable from a security standpoint, Apple recommends creating a separate user account on the Mac that is dedicated to file sharing. Give that account access only to the files/folders you want to share. You can then give that user account name and password to your Windows users.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

JDFitch wrote:
Ok Great,
Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
Jon
No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible)

HT5446 If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

If I buy a mac mini with a fusion drive and add windows using boot camp, can I make the SSD function be dedicated to the windows partition?

Additional information from Linc's post. Basically, only one additional partition can be added to a Fusion Drive and it resides on the HDD.
Do computers that come with a Fusion Drive support Boot Camp?
Yes. Use the Boot Camp Assistant to create a Windows partition and install Boot Camp. The Windows partition will exist on the hard disk drive, not the Flash drive, and is not part of Fusion Drive Logical Volume Group. 3TB Fusion Drive configurations need to update to OS X Mountain Lion v10.8.3 or later to install Windows 8. See iMac (27-inch, Late 2012): Boot Camp alert with 3T hard drive for more information.

Boot Camp can no longer be found

Using OS 10.6.8 on an early MacPro; Boot Camp can no longer be found; checked my Leopard disk but unable to find BC on it it. What to do?

Roy Bradshaw wrote:
I have the same problem as Merlin. I am runnung Snow Leopard 10.6.8 on a MacPro 1.1 with Intel Processor and when I go to Boot Camp Assistant to download the Windows support it says it is not available. Does this mean I have to "up-grade" to Lion, or what is the answer.
Read the Bootcamp Installation instructions. http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
The Windows Support software for Snow Leopard is on your Snow Leopard Installation disk. There is no download of Windows support software for Snow Leopard.

Windows 7 64 and Boot Camp

I installed 64-bits Windows 7 on my iMac 24 (end 2007) and it works perfectly. The only problem is the the Boot Camp drivers cannot be installed. (Snow Leopard disk).
Somewhere I have read that the Boot Camp drivers are not compatible with the 64-bit version on this iMac.
What shall I do now?
I also have a 32-bit version.

I don't see any help in those links.
What works for most, other than some of the issues with quality of Apple's drivers and graphic driver issue... the whole idea that somehow a Mac from 2007 isn't officially endorsed as supported, and Boot Camp 3.0 drivers are over a year old; came out before Windows 7 was out (but end of public RC phase).
which hinges on the Mac's firmware being EFI32 instead of UEFI 2.x (EFI64).
Copy the whole contents to a folder on your Windows volume.
Navigate to Apple\Drivers\Bootcamp64
control + click on that file and choose "Troubleshoot Compatibility Mode"
(or you can change Properties)
And you will then be able to overcome the "incompatible" error message and have them install
I have a 2006 Mac Pro also on the "endangered species list" as well.
Windows 64-bit versions from SP1 or later officially support UEFI, but that has not meant PCs couldn't install and use Windows 64-bit either.

I can't find ios partition after installation of Windows 7 via boot camp. can someone help please?

I installed Windows 7 via boot camp and now I can't find my Mac partition. My commuter boots up to a blank gray screen and after several minutes the Windows partition starts. I don't know what to do. Can someone help me?

In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
and Boot Camp: Install or repair Boot Camp drivers.
The other option is to use
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
How to Reset NVRAM on your Mac - Apple Support

How do I remove partitions "PV2" and "Boot Camp"?

I tried installing Windows 7 in Boot Camp and lost power during install. I want to completely start over but have partitions "PV2" and "Boot Camp" that I can't seem to remove. I have tried to remove partitions in Disk Utility but everything is grayed out. Boot Camp Assistant says "The disk appears to have been partitioned by another utility and can't be removed."

When I boot to recovery (Command+R) it gives me four options: Restore with Time Machine Backup, Reinstall OS X, Get Help Online, and Disk Utility. I am assuming I should erase the drives usings Disk Utility. I am able to select the PV2 and Boot Camp but when I select the "partition" tab the +/- buttons on the bottom is grayed out. I am not sure how exactly to "erase the entire drive." If you couldn't tell, I am a novice imac owner. I did make a backup using Time Machine earlier today.

Internetconection for Windows7 under Boot Camp

HI,
I have a Macbook Air 13 Running Lion and Windows7 under Boot Camp.
The internetconnection via WiFi is ok on both and via USB 2.0 Ethernet adapter to TP ok on Lion.
But the ethernetadapter does not work with windows.
I have installed the newest Brodacomdriver in Windows.
What is wrong???
Janne.

Mine does the same to.

If I want to install windows 8 in on my mac through boot camp, can I install windows 8 directly from my pendrive? whats the procedure?

If I want to install windows 8 in on my mac through boot camp, can I install windows 8 directly from my pendrive?
I do not have bootable CD.
whats the procedure?

Hi Rajthumar,
Welcome to the Apple Support Communities!
You can install Windows 7 or Windows 8 ISO using a USB flash drive. Please read over and reference the attached link for information on using Boot Camp to install Windows.
manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_10.8.p df
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Have a great day,
Joe

Problems with Bluetooth unter XP (SP 2) and Boot Camp 2.1

HI,
I recently installed XP (SP 2) and Boot Camp 2.0 (Original Leo DVD). After Installing, my Bluetooth Mighty Mouse works fine without installing anyting. After upgrading to Boot Camp 2.1 the Mouse is not working anymore. Looking at the System Settings at XP i get the Error "Apple Bluetooth hat a Problem (Error Code 43)", ist there an option to downgrade the Driver to Boot Camp 2.0 ? or has anybody an idea what to do ?

Thats an easier to diagnose problem.
Prior to BlueTooth is setup the Windows box will react on all BlueTooth devices present.
Thats why at boot you can use your BT keyboard and mouse.
As soon as the drivers get installed the not official paired devices get kicked off/disconnect.
You really need to go back into the BlueTooth setup and officially pair the devices to your system.
You anyway want to do that because a BT system that is not officially paired sends its keystrokes without any encryption out. So in your instance your neighbor could get all your passwords.
Setup your system without a BlueTooth keyboard and afterwards (the drivers are installed) officially pair the BT keyboard you want to use.
To your graphics card question, every driver is individually accessible via the disc. Just insert the driver disc, instead of running the setup.exe choose to explore the disc. On the disc you will either see a Boot Camp or a Driver folder. Click into that folder and you can individually install all drivers (separated by vendor) rather than using the general Boot Camp installer. Do note that with this method you do not install the other Boot Camp tools such as the full keyboard support and the Boot Camp Control Panel.

Intel Iris Pro and Boot Camp Gaming?

So I'm just wondering how the Intel Iris Pro, and Boot Camp Gaming go together? I just got a 15inch Mac Book Pro with:
2.0GHz quad-core Intel Core i7
Turbo Boost up to 3.2GHz
8GB 1600MHz memory
256GB PCIe-based flash storage
Intel Iris Pro Graphics
My question is, can this Macbook run games, (or just Star Wars the Old Republic), in max settings in Boot Camp?

I am assuming this is a custom-built dust prevention solution, yes?
Anyways, I received my replacement SuperDrive and just realized that due to Windows and Mac's limitations in regards to hard drives larger than 2.2 TB, I can't have any of my 3TB drives with both OS X and Windows without having at least two separate HFS partitions on them since the Windows partition must be in the fourth partition, requiring OS X to be in partition 2, Recovery in partition 3, and the combined size of these first four partitions must be under 2.2 TB.
At least that's my understanding. I currently have three 3 TB drives and one 1 TB drive (which contains Windows XP and 7 only).
I'm not really not sure if Windows has to be in the fourth partition because as I mentioned, my 1 TB drive has EFI in partition 1, Windows XP in partition 2, and Windows 7 in partition 3. I have OS 10.9 on one 3 TB drive, OS 10.7 on the second 3 TB drive, and no OS on the third 3 TB drive. I would prefer to install Windows 8 on that third 3 TB drive and yet have only one HFS partition because my desktop is already seemingly over-crowded with all the internal drives and partitions it has (I also have a 500GB SSD drive which is my 10.10 boot volume, plugged into one of the two unused SATA motherboard ports).
My plan is to first determine if I can now break the 1 TB drive barrier I ran into before and install two Windows OSs on a 2 TB drive (technically, I am going to clone my 1 TB Windows partitions onto the 2 TB drive). Next, I will attempt to partition a 3 TB drive with Windows 8 in partition 2 and HFS in partition 3.

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

Windows7 and boot camp, can it be reversed?

Similar Messages

Maybe you are looking for