Windows7 and on board 3G card

Hello,
it seems that some new PC with Windows 7 uses on board 3G card/processor with WWAN technology, and that last VPN client do not support WWAN device yet (VPN client 5.0.07.0290 for exemple).
Do you know when those on board card/module will be supported with CISCO VPN client ?
Do you know how we can check thet the inboard card is using WWAN technology ?
A end-customer is using a new PC HP 2740P with widows7 pro 32bits.
VPN connection does not work with the inboard HP UN2420 Module Broadband
but it works with an USB key Orange ICON225
Regards,

Hello Jabouaf,
I'm not a cisco expert, but I found what's wrong with the Cisco VPN Client with WWAN devices.
The DNE (Deterministic Network Enhancer) version (3.22.4.17992) provided by the Cisco VPN Client 5.X does not support WWAN devices in WIN7.
Please find below my workaround:
1. Uninstall the current version of Cisco VPN client software
2. Run ftp://files.citrix.com/winfix.exe. This will clean up and remove DNE installations.
3. Reboot computer
4. Install the Citrix DNE updater software ftp://files.citrix.com/dneupdate.msi
5. Install the Cisco VPN client software again
Hope this helps
Kelly

Similar Messages

HT4527 My old pc ran windows vista and mother board failed but the hard drive was good. I have a new system now and installed the old hard drive. how do I get itunes and all my music working now?

Hello, my old pc ran vista o.s. and the mother board died but the hard drive was good. I got a new system running windows7 and installed old hard drive to recover pictures and other data. How do I get my itunes and all my music back up and running.

See Recover your iTunes library from your iPod or iOS device.
tt2

I'm running windows7 and an iPhone4 and also an iPod touch2. When I connect to iTunes I get the message to uninstall and reinstall itunes. I've done this numerous times but still can't connect my devices to iTunes, HELP!

I'm running windows7 and I'm trying to connect my iPhone4 and iPod touch2 to itunes. I've installed the latest version of iTunes, and updated my iPhone's driver. When I connect either device to iTunes I get the message "you need to uninstall and reinstall itunes". I've done this multiple times with the same results. This is very frustrating, HELP!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

K7n2g on board graphic card

Hi,
I ve K7n2g and I couldnt use my on board graphic card
I couldnt set it up to 1152x864 and I coudlnt see healty
destop it was full or broken lines white lines I used
last vga driver for it but I didnt take any succesful result.
bios 3,3
amd xp 2200+
live!
creative v90 modem
512mb Twinmoss DDR

Hi,
Does it work OK using 1024x768?
Does your monitor support 1152x864?
Axel :D

Disable on board graphics card

How can I disable the on board graphics card on my P&-1227c? I am trying to install an new video card and it keeps coming up blank but when I take it out everything works agian. It came with Windows 7 installed so I do not have the secure boot configuration in my BIOS. My BIOS is the 7.7 version for the Jasmine motherboard. Is there a new version I can download?

Thank you for the additional information.
I have reviewed the specs of the video card. It appears to require a minimum of 400W. Your new PSU should take care of the problem. Corsair sells very good products.
The only BIOS updates that will work with HP motherboards are those provided by them. None of the retail versions will work properly.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Trouble with Windows7 and Gigabit link on Cisco 3560X switch

Hello,
In my company, we are using Cisco IP Phones 7945G (with 2 gigabit network ports) and Cisco 3560X-48P (1GB ports) switches for our users.
Our client computers are running on Windows 7 SP1 (64bit - Enterprise edition) and are connected behind the IP Phone. We use a "Boradcom
Xtreme Gigabit" onboard network card on the computers. All ports (on the switch site and IP Phone side) and on the network card of the computer are configured in "auto negotiation". Duplex and speed are set to "auto".
We tried now to deploy a new engineering software and we are facing a very strange problem. This means that the engineer software fails to download some files from the server. We are using a flat network, all the servers and computers are on the same network segment with no firewall inbetween.
The firewall and Anti-virus on the computers are configured to allow all incoming/outing connections.
To troubleshoot, I tried to change all the network cables but I still get same result --> download fails.
I connected the client computer directly to the Cisco 3560X switch, without the IP Phone and I get the same result.
I installed a separate network card from INTEL (Intel PRO1000 PT) but I get the same result.
As last test, I have connected to same client computer directly to a Cisco 2960-8TC switch (100Mbit; auto negotiate) and here is working fine. The software successfully downloads all the files from the server.
If I connect the computer behind the Cisco 7945 IP Phone, set the speed and duplex of the PC-Port on the Cisco IP Phone 7945G to "100MBit/full duplex" is also working fine.
Is there any know issue with Windows7 and Gigabit network connections?
Do I need to set any Registry key on my Windows 7?
The firmware version of my Cisco 3560X-48P switch is 12.2(53)SE2; do I need to update it?
The firmware version of the IP Phone 7945G is 9.2.1.
Thanks in advanced for your help.
Marc Hoffmann

Hello, Thanks for your answers. First of all, I have updated the firmware of my Cisco Catalyst 3560X-48P switch to the version 12.2(55)SE5. Unfortunately, this did not solve my problem. As second step, I ran an TDR test on my 3560X switch but I do not get any result. The "Pair status" always says "not completed". Even if I wait for 5 minutes, the status remains at "Not completed". Am I doing something wrong ? To do the TDR test, I use the commande "test cable-diagnostics tdr interface gigabitEthernet 0/XY". For your information, the port gigabitEthernet 0/XY is in a "Connected" status when I run the "show int status" command. Jeff, I think there is no issue on the server side, because if I connect my workstation on a 100MB switch (example Cisco Catalyst 2960-8TC-L) the application works absolutely fine. Also, if I run the application locally on the server, it works fine. As next step, I will connect the workstation directly on our backbone switch and try the same test. Is there perhaps any Registry key in our Windows7 which could cause this trouble? If you have any other ideas or options, please let me know. Thanks a lot, Marc Hoffmann

Page 2006 and AppleWorks 6 business cards

For the past few years, I've been using a DB template that came with AppleWorks 6 to generate standard 10-up sheets of business cards for a local volunteer organization's board members. Does Pages 2006 offer this kind of functionality?

http://www.iworkcommunity.com/modules.php?name=Downloads&d_op=search&query=
That iWorks site does have a 10 up business card template. Click on the link and then click on the download. When you click on the downloaded file it automatically opens the template and away you go.
Edit: Sorry. That link does not work. Go to the Template site and search for business cards. I got two different templates to pop up.

I signed up for Games Center. How to un-sign and get my credit card info removed?

OK. I'm an idiot (with an IPad2).
I don't want to play games with other people but there was a chess board among the images for Games Center so I thought there was a chess program I could check out.
So now there is no point in me taking any risks and having my credit card info associated with Games Center, so how to I reverse my sign-up for games center and get my credit card info deleted?
I can't even find a way to edit the credit card info - and if I could I suppose they wouldn't accept a link to an incorrect number ...

We don't work for Adobe. We are just users.
You'll want to take this to the proper forum for that product at Adobe PDF Pack (read only)
Good luck.

K8N Diamond Plus, SLI and Creative X-Fi cards, anyone running similar?

Hi there!
I've got an ASUS A8N32-SLI board and my X-Fi card does not work with it, nor does it for many other people with similar setups.
See here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=31426
and here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=26289
I get crackling and popping noises when running most games, e.g. BF2, Fear, FarCry. When my 2x7800GTX's are in SLI mode it crackles loads, e.g. start far cry, click options, and listen. When i disable SLI mode it crackles less, but it still crackles. Many others encounter similar issues with their systems that are not identical but the symptoms are similar - high load = crackling/popping.
My question is:
Is anyone here sucessfully running any X-Fi card (music, fatality, elite pro, etc) with 2x video cards and NO crackling/popping in BF2, FEAR and FarCry?
I've already had a replacement X-Fi card from creative which their tech guy said "should" fix it, lol, I'm wondering wether to replace my A8N32-SLI with an K8N Diamond Plus to fix the problem. Besides, the MSI board has better PCI slot location and works with nTune too unlike the ASUS board.

What's going on guys.
I hate to see peep's having soooo many prob's and it sucks major BALLZ. The reason why I'm reposting is that I encountered a new issue. Not with my rig, but a friend's.
We pretty much have the same setup. Differences are he's using 2GB of Corsair DDR400 (which is picking up as DDR333 as well), different branded video cards (I'm running two EVGA 7800GT's in SLi, he's running two BFG 7800GT's in SLi), XFi Platinum (me, Fatality Edition) and he's got a dedicated ITE RAID PCI card for his RAID from his previous rig. Configured his BIOS pretty much the same way I have it running (he wanted to Overclock his AMD x2 4400+ to 2.6 GHz), but when it came to installing Windows we kept getting BSOD's during installation. Looked over things numerous times and it didn't make sense. We resetted the BIOS to default settings and Windows went through without a hitch. We tried OC'ing it one more time and Windows was fine. But, when he installed and ran Quake 4, either Windows or the game would just lock up. He booted back into the BIOS and put the CPU back at stock frequency of 2.2 GHz. Game ran flawlessly afterwards. That points at the processor. The only differences were we both have different stock fans and his CPU was manufactured in July '05. Mine in Sept '05. His rig also reports the infamous "Phantom" PCI modem as well.
Quake 4 is the only game he's got installed so far, but he reports everything is set to their highest qualities, including resolution. He said it runs great with no anomalies. He's going to install Dawn of War and Winter Assault later I know.
Me? I haven't run into any issues with any games either, including F.E.A.R. as Hydrasworld asked. Both of our sound cards are in the Communication PCI Slot of the motherboard. My take on the OC issue is since we're using different proc's from different wafers, maybe my chip had revisions in September that the July proc my friend has didn't. Also, his heatsink has one less copper pipe I noticed. I'll still drop by for help. Good luck to you all and the only other thing I can add is try using the latest drivers for each piece of hardware you've got.
LPB
P.S. If you can and you purchased a retail version of the processor, on one of the sides of the carton insert for the processor, a date should be printed. Maybe that can explain some issues. Once more, my proc was manufactured September 15th, 2005.

Synchronisation of frame grabber and DAQ board

I want to aquire images and analog voltage signals at the same time, and synchronised, using a NI PCI-1428 Camera Link frame grabber and a NI PCI-6014 DAQ board. Can this be done using the RTSI trigger functions? I know that the frame grabber supports this, but what about the DAQ board?
How about synchronising a NI-board with a non-NI frame grabber?
Thanks a lot!
Peter

Hi, Peter,
No, the PCI-6014 DAQ board does not support RTSI. However, most of the low-cost E-series NI data acquisition cards do support RTSI, such as the PCI-6024E or PCI-6036E, so you might consider using one of those boards instead.
If you decide to go that route, there is a useful tutorial that describes the signals that can be routed over RTSI for NI DAQ and IMAQ boards:
Developer Zone Tutorial: Synchronizing Motion, Vision, and Data Acquisition
as well as several example programs:
Developer Zone Example: Integra
ting IMAQ and DAQ with Single Display
Developer Zone Example: Low-level Triggered Ring (with DAQ-supplied triggers)
As for a non-NI frame grabber, that would really depend on what support the frame grabber has for timing and synchronization. You could route a trigger signal or scan clock out over the PFI pins on the PCI-6014, but you would need to see if the frame grabber is designed to receive these types of signals.
I hope that helps!
Best regards,
Dawna P.
Applications Engineer
National Instruments

On-board sound card failing. Will BIOS let me add a sound card into the PCIE slot?

On-board sound card failing, consistently locking everything, (yes, I updated all drivers, codecs) so want to put in new sound card. Will the BIOS let me add a sound card into the PCIE slot? (of course after disabling the ReakTek onboard sound) I don't see an option to choose PCI or PCI-E in the setup screen (F10 at boot) for audio.
Pavilion desktop a6200t, Windows7 SP1
System board is Lancaster8 1.04, BIOS 5.18
This question was solved.
View Solution.

Hi there! yes it will let you install a seperate sound card as long as you have a vacant slot
spacechild

I have the following system and want to run Elements12 or 13 efficiently; Vista Home Premium 32bit, Intel core 2duo E4500@2.2GHZ, 3 GB RAM DDR2, Mobo MSI MS-7267 and on-board graphics chipset. I tried to run Elements9 and was rather slow so you can imagin

I have the following system and want to run Elements12 or 13 efficiently; Vista Home Premium 32bit, Intel core 2duo [email protected], 3 GB RAM DDR2, Mobo MSI MS-7267 and on-board graphics chipset. I tried to run Elements9 and was rather slow so you can imagine Elements12 or 13..... Do I have to change the whole system or just buy a suitable VGA card? Which card would be OK for this system? Thanx..

stavrosd
NVIDIA GT730
GeForce GT 730 | Specifications | GeForce
I think that the key here is going from a 32 bit to 64 bit computer operating system where Premiere Elements 11, 12, or 13 can become 64 bit application in a Windows 7 or 8.1 64 bit computer operating system. The increased computer resources implication of that should increase the frequency of getting the larger project taken to a successful complete more than before. A lot of this has to do with multitasking potential.
Premiere Elements does not support CUDA as seen in high end video cards/graphics cards. Since Premiere Elements 9, Premiere Elements has no GPU accelerated effects. But, I would decide on the best card for you based on overall computer rather than just for use in Premiere Elements. If you are interested in computer games, that will impact your card decision.
The use of a non super NVIDIA or ATI card should work for you. But, I have used neither.
I would consider more installed RAM, depending on your computer motherboard slots.
You might want to discuss the choice of the card with NVIDIA.
Compare and Buy GPUs | GeForce
I suspect that
My desktop and laptop computer both use the integrated Intel HD Graphics where my strengths included installed RAM, free hard drive space, and computer processor.
Please consider. Any questions, please do not hesitate to ask.
Thank you.
ATR

MSI BIOS Beeps and Mother Board Issues

Hi gang,
I am new to this forum. I am a tech at a small town PC store. I have an msi mother board that is throwing an error beep that I have never heard before. The beeps go something like this 1-2 a high pitch beep, then a low pitch beep. The mother board is the MS 6526 Ver. 2. I have tried another video card and the board will still do the same thing. The mother board does not act this way all of the time. Sometimes the machine boots fine and runs perfect. I have noticed that when restarting the machine, the problem occurs there most of the time. the machine will reboot and set there with an amber light on the monitor. I can turn the machine on and off a couple of times and then it will boot and run; this pattern is not consistant. I felt that it could be a bad processor or mother board. Any ideas?
Thanks

If the beep code is 1 long beep followed by 2 short beeps then that's indicating a problem with the display card. Perhaps it could even be an issue with the slot itself. If you try a PCI graphics card instead of AGP do you still get the issue? Have you tried a different power supply too?

How do i use my itunes gift card money and not my credit card

How do i use my itunes gift card money and not my credit card
My ipod told me that i had to put in a credit card and because of that i put in my moms wit her permission. but the thing is i do not want to use the money on her credit card. i hav a 10 dollar itunes gift card in it already and none of it is used up. i want to use that money
how do i do it

Open iTunes on your computer. In the iTunes Store log into your iTunes Store account and view your account. Select Edit Payment Information. In the credit card choices I would choose None. That will remove your Mom's CC info. Next under iTunes Gift Cards and Certificates click the little arrow to redeem your Gift Card. Then follow the instrction to redeem your GC.
You can also do this on your iPod, but it is more complicated to describe how to do it and to actually do it. It is easier to do in the iTunes on your computer.

Problem with Windows7 and Adobe Flash freezing computer?

Hello All, There is a problem with Windows7 and my Adobe Flash causing my computer to freeze. So, Skype, videos, etc will not work. Have tried many things to solve problem. Can Oracle VM be used to run a different operating system...such as XP or Vista where Flash will work properly? I would hate to have a new operating system installed on a new computer. thanks

If you mean Oracle VM VirtualBox, then yes, definitely. A free download, it installs and runs great on Windows 7. http://www.virtualbox.org/

Windows7 and on board 3G card

Similar Messages

Maybe you are looking for