Windows7 deskjet 5652 Photopaper print lines

The Deskjet 5652 works fine under XP. Now a new PC with Windows7. I did NOT install additional software from the original cd. I just plugged the usb plug in the PC. The printer works fine, however I have a three column folder to print from Word2007 and the problem is that a dashed line is always printed above the text (header margin).
If I create the same document again, from scratch, it doesn't make a difference.
The black dashed line (not perfect, some dashes and not always on the same place, but always at the top line) is not there when I print a normal document.
Why is this hapening?
Thanks in advance

I can't print pictures that I download from my camera, everything else prints

Similar Messages

  • HP DESKJET 3052A When printing it is skipping lines. cartridges are new and cleaned

    When printing lines are being skipped. cartridges are HP and new
    Have cleaned 

    Hello @Jeanne3 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having issues with your print output.  I'd like to help!
    Does this issue occur when  making a copy as opposed to a print?
    I'd recommend removing the ink cartridges, and performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I'd also recommend utilizing this document:
    Fixing Print Quality Problems for the HP Deskjet 3050A (J611) All-in-One Printer Series
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Windows 7 in OS printer driver for Deskjet 6840 not printing properly

    The Windows 7 (32 bit) in OS print driver for the Deskjet 6840 produces print in "Normal" mode that is blurred (not properly registered left to right and slightly vertically). When printing in "Draft" mode it is apparent that the driver is not setting the left and right margins correctly, so that each line is alternately shifted left or right on the page. If I switch to a 500C driver, the printer works fine (but of course high res images do not print properly). This is occuring on two wired network computers, both running clean installs of Windows 7 professional with all current updates including Service Pack 1. Microsoft says, "It's a HP printer, it's their problem". I'm just looking for an answer. Anyone have experience with this?

    Hello Bhl3302,
    Thanks for posting at NI forums! I think you should follow RavensFan advice on contacting the vendor for information on the driver’s support, or if you have a readme file, you could check on that. Also, are the Windows XP and Windows sharing the same architecture (32 or 64 bits)? Maybe the driver is not compatible with one of them, in case it changed. I did a quick search on the error message you're getting, and I found this forum in which they give some steps you could follow regarding the INF file. For instance, in one of the comments, they say they had a similar issue with another device and they found some work arounds. 
    Best Regards,
    Alina M

  • HP Deskjet 1280, SAP printer drivers.

    We are using an HP Deskjet 1280 for SAP printing. It works fine but cannot print lines on SAP reports containing lines or tables. If you know of any drivers that I should be using for this kind of printer is SAP, I will be very glad to know.
    Thank you in advance.

    HP is not supporting this printer in Snow Leopard. You will need to use third party drivers to print. The Gutenprint drivers should already be installed on your system. If not, you can download a copy of the latest version at http://gutenprint.sourceforge.net/MacOSX.php. These drivers do not support duplex printing.
    The other choice is the hpijs package found on the OpenPrinting.org page http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs.

  • HP Deskjet 5652

    Hey I've got a deskjet 5652 setup on a network and I can't figure out how to print a config page out of it to find the IP of the printer? anyone know the series of buttons that need to pushed to make this happen.
    Cheers 

    Hi Marbert2,
    Welcome to the HP Forums!
    I understand that you are wanting to connect this HP Deskjet 5652 Color Inkjet printer to your Mac 10.9.2. I am sorry, but there are only drivers for up to Mac 10.5. There is no software available for this printer for Mac OS X 10.9. To see what Operating Systems are available to be used with this printer, please see this website. HP Deskjet 5652 Color Inkjet Printer Drivers.
    If you need a printer that can work on Mac OS X 10.9.2, please call our technical support at 800-474-6836 for your upgrade/replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Hope this answers your question, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hp deskjet 1510 not print A5 size paper

    just we buy the all in one 1510 printer, in advance option there in option to print A5 size paper

    Hello Dheerajdro,
    Welcome to the HP Support Forums!
    If I understood correctly, you are wondering if the Deskjet 1510 will print on A5 paper. A5 paper is not listed under the supported paper types.
    To see which media sizes are supported, please review the below screen shot.
    To view source: Printer Specifications for the HP Deskjet 1510 and Deskjet Ink Advantage 1510 All-in-One Printer Ser....
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

    Product Name and Number: HP Deskjet 3550 Inkjet Printer
    Operating System installed: Windows 7 Home Premium 64 bits
    Error message: None
    Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
    Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
    Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
    Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
    Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
    Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
    Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
    If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
    https://discussions.apple.com/community/wireless/airport
    Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

    UPDATE!
    Problem solved!  So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
    Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well.  So, we can call off the technoid hounds.  Everything running perfectly.
    I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper.  And just to recap those important Windows printer settings, they are:
    * [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
    * [Configure Port] IP Address "10.0.1.1" and Port "9100"
    Best of luck!
    Bilgey

  • I have an HP Deskjet D4200 series printer that ised with my iBook G4.  I would like to use it with my new MacBook Pro that I just purchased.  Is there anyway to do this?  When I try to install the driver using the CD, I get the message, "can not open the

    I have a HP Deskjet D4200 series printer that I used with my iBook G4 and I recently purchased a new MacBook Pro 13.5" and I would like to use this printer with my new lap top.  When I use the disc to try to install the printer driver, I get a message that "I can't open the application HP Installer because the Power PC applications are no longer supported.  I am not sure what all that means but is there any way to use this printer with my new computer?
    Thanks

    It would help to post this in a more proper form. This is for the iTunes family of stores.

  • HP Deskjet 460 wireless printer connection problem

    I just replaced my Airport Extreme (pre-n) with a Time Capsule. My HP Deskjet 460 WiFi printer no longer connects through wireless. However, configuring the Time Capsule wireless mode to "802.11g/b only" (i.e. no 802.11n) resolves the connection problem.
    Any suggestion on how to get the printer to connect with 802.11n enabled?
    Thanks in advance,
    - gael

    I also have an HP 460wbt and have similarly replaced my old airport base station with the TC. Without any wireless security the printer connected fine - but couldn't get connection using WPA or WEP. I've tried every combination I can - but have gone back to reconnecting the airport base station alongside the TC with bridging to the ADSL netgear modem I use. This seems a bit like overkill but I just can't get the WPA on the printer to work with the WPA personal options of the TC. Have you any ideas on this one?

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • Need the latest drivers for a Deskjet 895Cse inkjet printer

    I wanted to download and install the latest drivers for an HP Desket 895Cse inkjet printer but the only driver updates that are available on your website are for an HP Deskjet 895Cxi.  I've never owned an HP Deskjet 895Cxi inkjet printer; only the HP Deskjet 895Cse inkjet printer.   Do these two models use the same set of drivers or does your website no longer offer updated drivers for an HP Deskjet 895Cse inkjet printer?  
    I'm planning to address various sized envelopes for Christmas cards which I have done in the past using my older model HP Deskjet 895Cse inkjet printer because my current HP printer; an HP C5280 Photosmart All In One inkjet printer will not allow me to print on odd sized greeting card envelopes; only standard sized business envelopes like a No. 10, No. 11 and a No. 12.  
    Last night I ordered new inkjet cartridges for my Deskjet 895Cse inkjet printer; a #23 color cartridge and a #45 black cartridge; both cartridges set me back about $70.00 after applying discounts and using a promo coupon code from HP.   I spoke to someone in tech support overseas yesterday who advised me to download the most up to date drivers for my Deskjet 895Cse inkjet printer before I install the new cartridges and begin to address my Christmas card envelopes; about 75 envelopes; front and back.  
    If there are no new drivers available for my Deskjet 895Cse inkjet printer should I plan to return my new HP inkjet cartridges once I receive them because if my Deskjet 895Cse inkjet printer will not allow me to print on anything unless I install the latest set of drivers for my Desket 895Cse inkjet printer and if there are no new drivers currently available on your website I might as well return my newly ordered cartidges as soon as I receive them by Fedex from HP and get my $70.00 back.   Feedback on this would certainly be appreciated. 
    Stevoreno
    12/10/13

    Why doesn't the website list the latest drivers for an 895Cse?   Was the Deskjet 895Cse inkjet printer released for sale to the public before the Deskjet 895Cxi inkjet printer or visa versa?   Basically what's the difference between the 2 models?  Finally if I were to install my new cartridges which haven't arrived yet and choose not to install the drivers for the 895Cxi model will my 895Cse printer still work and be able to print?
    Stevoreno
    12/10/13

  • How to print line item 2times in two different main window in Sap Script

    Hi,
    I am designing check printing form using Sap script. I need to print line items 2times in different 2main window.can yu pls explain  how print like this.
    JK

    i cud not get ur query..pls elaborate

  • Printing line items in next line smartforms

    how to print line item description in next line...
    suppose
    i have line item description as
    "this is description of line item"
    then i need to print as
    "this is"
    "description of line item"
    in two lines......
                so that no trunkation takes place please reply me ....

    Use offset
    v_text(20)
    in the second line use
    v_text+20(40)
    If this does not work
    then declare two more fileds
    and write the code
    v_text1 =  v_text(20)
    v_text2 = v_text+20(40)
    and print the new fields
    Reward points if useful,
    Regards,
    Nageswar

  • How do I set up my 3520 Deskjet to e-print in windows 8

    how do I set up my 3520 Deskjet to e-print in windows 8

    Hi,
    Please download and install drivers first:
       http://ftp.hp.com/pub/softlib/software12/COL42544/​al-108812-3/DJ3520_1315.exe
    then install the following ePrint software:
       http://ftp.hp.com/pub/softlib/software12/COL39376/​lj-96046-6/HP-ePrint-win-4.6.60.12747.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My deskjet 9800 only prints partial pages

    My deskjet 9800 only prints partial pages in 11x17" format. then pulls another paper for two inches of printing then pulls another paper for another two inches of printing etc. Other sizes work fine. I just upgraded my computer and changed cable to a usb port. I downloaded a new driver and reset all the settings. I am lost as what to do. thank you Einer Mortensen

    Hello , Welcome to the HP Support Forums!
    I understand that you're experiencing partial print issues when printing from your Windows 8 computer to your HP Deskjet 2540 All-in-One Printer. I would like to assist you today with resolving this wireless printing issue. Because you are able to scan without issues, and are able to print from other devices perfectly fine I do not believe that this is a networking issue, or a software and driver conflict between your Windows computer and your printer. Rather, I believe that there is a wireless printing port (WSD Port) conflict occuring on your computer. Can I please have you follow the steps below to resolve this issue.  Microsoft has released a Hotfix to correct printing issues within the Windows 8 and Windows 8.1 Operating Systems. This includes 'Partial Printing' and 'Printer Offline' issues. The printing issues appear to affect networked printers regardless of make or model and is a conflict with the WSD Network Port on Windows 8.1. Please click here to download and run a Microsoft Fix It Tool. Once the website opens for the Hotfix please click the button for 'Hotfix Download Available'. Please follow the onscreen prompts to install the Hotfix. Once the Hotfix has been loaded please test wireless printing again. If printing fails you may need to restart your computer for the Hotfix to take affect. Once your computer comes ON test wireless printing to confirm that the issue has been resolved.
      Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Maybe you are looking for

  • Mac OS 10.7 (Lion) won't start After Effects CS5.5 because it's a powerpc app!?

    I've had CS 5.5 Master Collection installed on my Mac since it came out. All the CS 5/5.5 apps I've used up to now have worked fine, in 64-bit mode (Photoshop, Illustrator, Acrobat Pro, InDesign). Now I need to use After Effects, but I can't get it t

  • Bursting ERROR: java.util.NoSuchElementException in 1 level XML (i.e. FSG)

    Hello, We are encountering error with 1-level XML(non-RDF reports - i.e. FSG) on bursting. It is happening when the bursting control file ("select" attribute under "request" element) only has 1 level of distribution XML(i.e. /MasterReport). I have fo

  • Visible Frame minimizes when I instantiate print class

    On a JTabbedPane I have radiobuttons that popup reports in JTable format. Each report has a menu with print option which instantiates a print utility class. This action causes the frame with the JTabbedPane to minimize. How can I prevent this? Should

  • Create a Tool to create Opportunity.

    Hello All, We have two types of Opportunity A & B. Some times Users have to discontinute  Opportunity B and Create Opportunity A instead for the same customer .So just to make things easier they want  a Tool where we can automate the process of creat

  • To solo a track from an external device

    I'm from Germany... so, sorry for my english... Is it possible in Adobe Audition 3 to solo a track over an external device, maybe a midi keyboard? I tried it with midi trigger and shortcuts, but I can only make solo next track/solo previous track! I