WindowsServer2008R2- "Access Denied. Contact your administrator"
Hello,
We are a small company using WindowsServer2008R2 Enterprise software for our file server. Users are using Microsoft Office 2010 on Windows 7 Professional. All users have similar permissions.
When I open a file from file server on my computer, and edit -> save -> close it, after that neither me nor other users are able to open the file. We all get error "Access Denied. Contact your administrator".
Note that if OTHER users do the same (i.e. open a file from file server on my computer, and edit -> save -> close it), we dont get the same error. We all are easily able to open the file.
Please suggest a solution urgently.
Thanks
Hi,
First I would like you to disable the anti-virus program on the server to test the result. I've seen that some anti-virus program may cause this problem.
Please right click on the shared file and check the Security tab permissions, are you listed as a user? Check it before and after you open and close the file. If you are not listed after you save the file, try re-adding yourself and check the result.
If it's not office documents specific, we may post this question in the Windows Server Forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank
you for your understanding.
Regards,
Melon Chen
TechNet Community Support
Similar Messages
-
"Access Denied. Contact your administrator"
Hello,
We are a small company using WindowsServer2008R2 Enterprise software for our file server. Users are using Microsoft Office 2010 on Windows 7 Professional. All users have similar permissions.
When I open a file from file server on my computer, and edit -> save -> close it, after that neither me nor other users are able to open the file. We all get error "Access Denied. Contact your administrator".
Note that if OTHER users do the same (i.e. open a file from file server on my computer, and edit -> save -> close it), we dont get the same error. We all are easily able to open the file.
Please suggest a solution urgently.
ThanksThis issue occurs because Excel 2010 tries to delete the temporary copy of the original workbook on the UNC share.
When a user saves an Excel workbook to a UNC share location, Excel 2010 creates a temporary copy of the workbook. In the final step of the saving process, Excel 2010 deletes the original Excel workbook and replaces it with a temporary copy. If Delete permissions
are not granted to the user, Excel 2010 cannot complete the saving process, and the user receives the error message that is mentioned in the "Symptoms" section.
To resolve this issue, apply the following update:
http://support.microsoft.com/kb/2553034
Source link: http://support.microsoft.com/kb/2589410
More information about troubleshooting errors when you save Excel files, please visit here:
https://support.microsoft.com/kb/271513
Tony Chen
TechNet Community Support -
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- EvenstarlineHi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account. I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well. I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline -
Hi guys,
I posted a question which was reviewed and published, now i am not able to see the quesrion and the replies anymore.
I am getting this message "Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here."
Can you please help.
Thank you
AndyYou get this due to your newer status in forum, most of the contect needs to be reviewed and approved by one of us ie modertors of this space
-
I tried to post a question on SCN and I too got the following error:
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
Does that mean my question is rejected ? or is it being moderated ?This is because your new discussion thread was rejected. You should see feedback from the moderation at http://scn.sap.com/actions/notifications
-
Hello,
I am not able to find the discussion, as it is showing error message
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
The thread link is mentioned below.
http://scn.sap.com/thread/3704991
ThanksHi Sanjana,
I think you may raised issue about CRM Data source enhancement.
if yes then that might be hidden by moderator as per SCN rules. Mean its alerted by scn experts and moderators will take action as epr scn rules.
Data source enhacement have been discussed mnay times on scn.
please go thru sample existing codes, apply your lgoic and follow it.
Later you can do syntax check and do the debeug with help of abap expert.
Thanks -
when intalling itunes i get message saying system administrator has set policies to prevent this installation; when trying to uninstall message says you do not have sufficient access to uninstall itunes please contact your administrator. i am the dministrator.
Windows right?
Likely your not the administor any more, the botnet is.
Check on this site really quick if your part of a botnet
http://botnetchecker.com/
All clear? Hopefully. Backup your files to a external drive, cd or dvd, USB keye etc off your computer.
Run the sfx file on this site and it will burn to a cd.
http://www.avira.com/en/support-download-avira-antivir-rescue-system
Next hit your BIO's key and set the cd to boot first, run the scanner and see what it pops up.
If your all clear then create another Admin, transfer your files over from the first Admin.
See if that works, eventually when your totally over to the new Admin, delete the old one.
If you can't create a new Admin, find out who locked your machine down, like your parents or it's a school computer?
Likely installed spyware or "nanyware" to watch you.
Hope that works. -
Guided access unavailable.please contact your administrator
How do I get a sign that says... Guided access app unavailable. Please contact your administrator. Off my screen
Had a similar problem. I remotely turned on guided access, but some of the iPads did not have the app that was suppose to load on.
Here is how I was able to fix it.
1. In your Mobile Management system tell the iPad to repair.
2. On the device turn on guided access, even though you turned it on it didn't seem to work.
3. Reset the iPad, holding both sleep and home button.
4. I waited a few minutes and turned it back on and I was set.
This worked on the two devices that I have tried it on. The first I completely removed the device from the management system, but did not need to do that because the second time I only repaired the iPad. -
Unauthorized Access: please contact the administrator. for BI publisher rep
Hi experts,
I am able to see the BI publisher as admin.But when i login with user it is giving the following error:
Unauthorized Access: please contact the administrator.
But analysis reports are working.only problem with BI publisher reports.any extra setting required for BI publisher reports
for implementing the object level security ?
Regards
BiruduVerify whether your userid is added in the developer group. Ask the person who has admin proviledges or tech Arch team.
Thanks,
Biindu H -
My Inspector for my house sent me his report via PDF that I had to access from an online link. I downloaded it but cannot forward it in an email to my insurance company who is requiring a copy. I get this error report every time:
Server Connection Error. Please verify that port 143 is available for connection on your machine or contact your administrator.
I have no idea what this means. Can someone help? I really don't want to have to print and scan this beast but I've been messing with this for 2 days now and am out of ideas.
Thanks!I'm having the same issue. Did you resolve it?
-
I get this error: "It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.", when I try to view this Thread: http://talk.sonymobile.com/thread/60272
Give me access to the Thread and explain me where I broke the forum rule... First Sony sells me phone by deception and when I question Sony, I get kicked out of the Thread (by Sony hired Goons)....respected admin,
when i connect my mobile with pc companion there's a update of 15.3.A.1.12 for Xperia L. But as usual for all user the update from pc companion becomes very slow while the update from update center from mobile means wireless update is comfortable and fast. But there is no update (15.3.A.1.12) seen in update center.
and as in the following link (of sony) its still showing 15.3.A.0.26..
Can you say how long will it take for the update (15.3.A.1.12) to come to the update center (wireless update) ?
and is the update 15.3.A.1.12 officially out..and if no how much time it will take?
Please do reply asap as there are many problems happening in .26 update. -
Hi,
I'm not able to access the term store. I get an below mentioned error.
"The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
Hence, this is not a permission issue.
I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
After reading one of the recommendation on internet, I created a new Managed Metadata Service.
After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
Now again its not working after I did an IISRESET.
The managed metadata service (Managed Metadata Service Connection) is grayed out.
ULS Error says:
Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
Please let me know if you need more information.Hi Victoria,
Thanks for your reply
I tried making all the changes you had recommended and which are mentioned in the link you have provided.
I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
One thing is that, my error in ULS logs has changed.
Error 1:
Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
Error 2:
Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a()
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings()
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0(). -
Hello Guys,
I am creating resultsource from central admin. If I create it from central admin it works fine. But if I am creating result source from power shell scripts it shows me following error message.
An exception of type 'Microsoft.Office.Server.Search.Query.InternalQueryErrorException' occurred in Microsoft.Office.Server.Search.dll but was not handled in user code
Additional information: Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
Any suggestion ?
Thanks in Advance.Hi,
Please provide more specific information about the issue. What type of content source you tried creating via powershell?
Make sure you are using the approproate permission and search service application.
Here is the reference for creating content resource via script:
http://technet.microsoft.com/en-us/library/ff607867(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support -
After clicking in email link, I get the following message on Firefox page : " The application cannot proceed!
An internal error occured. Please contact your administrator and describe the steps you took before you encounter this error message.Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct."
The email asked to install the latest Adobe Flashplayer version to have it working. I installed it, also updated my plug-ins and checked in safe mode that the extensions were not the problem. I also deleted the cookies an cache. Nothing seems to be working so far. I have the lastest version of Firefox 8.0.1 as well as Roboform 7. I noticed that the latest Firefox version has (x86) tagged to it. Does it refers to an 86 bits because my computer uses 32 or 64 bits only. I tried also different browsers and the message kept appearing. How do I resolve this problem?Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Maybe you are looking for
-
How to define an internal table which have to be dynamic
Hallo, here's a problem that i have to solve (but how ?). I defined an internal Table with 2 columns: col1: tablename col2: fieldname This table is filled with an unknown number of datasets like this: dataset1: A001 KAPPL dataset2: A001 KNUMH dataset
-
Printing right-justification problem
I have tried to use several methods to accurately determine the rendered width of a string in order to position it at (right_edge - width) --that is, right-justified. The problem is, all of the methods I have tried seem to under-report the length, r
-
Referencing tables in another Numbers '09 file
Is there a way to reference table in another Numbers file. For example using the VLOOKUP formula to bring data from another Numbers file into my current table. I was wondering if you have to have that table in the same Numbers file. My Tables are in
-
[SOLVED] Can not boot after mishap with clonezilla
Hi I was trying to back up my computer with Clonezilla. It kept telling me that the drive I was trying to back up (the only hard drive in my laptop and only has Arch Linux installed on it) had a GPT and MBR partition table. I thought that this was od
-
Updating to IOS 4.1 on 3GS - Any Problems?
Has anybody updated to IOS 4.1 without upgrading iTunes to 10 and been successful?