Wine cannot resize screen when in fullsreen using nvidia

Hello
when I switched from nouveau to the nvidia driver I get this problem when I want to start a game (Commandos) :
fixme:win:EnumDisplayDevicesW ((null),0,0x32ece8,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x32ec18,0x00000000), stub!
err:x11settings:X11DRV_ChangeDisplaySettingsEx No matching mode found 640x480x0 @0! (XRandR 1.2)
fixme:win:EnumDisplayDevicesW ((null),0,0x32df38,0x00000000), stub!
err:x11settings:X11DRV_ChangeDisplaySettingsEx No matching mode found 640x480x0 @0! (XRandR 1.2)
fixme:win:EnumDisplayDevicesW ((null),0,0x32df38,0x00000000), stub!
err:x11settings:X11DRV_ChangeDisplaySettingsEx No matching mode found 640x480x0 @0! (XRandR 1.2)
err:d3d:wined3d_unregister_window Window 0x1006c is not registered with wined3d.
err:d3d:wined3d_unregister_window Window 0x1006c is not registered with wined3d.
When I run xrandr I only get:
$ xrandr --query
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 8192 x 8192
VGA-0 disconnected primary (normal left inverted right x axis y axis)
LVDS-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 290mm x 170mm
1366x768 60.0*+ 50.0
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
I tried this article to add some resolutions but I only get this error:
$ cvt 640 480
# 640x480 59.38 Hz (CVT 0.31M3) hsync: 29.69 kHz; pclk: 23.75 MHz
Modeline "640x480_60.00" 23.75 640 664 720 800 480 483 487 500 -hsync +vsync
$ xrandr --newmode "640x480_60.00" 23.75 640 664 720 800 480 483 487 500 -hsync +vsync
$ xrandr --addmode LVDS-0 640x480_60.00
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 29
Current serial number in output stream: 30
I believe the problem exists between xrandr and the nvidia driver because it worked with the nouveau driver.
I switched from nouveau to nvidia with this commands:
$ pacman -Rdds --noconfirm nouveau-dri xf86-video-nouveau mesa-libgl lib32-nouveau-dri lib32-mesa-libgl
$ pacman -S --noconfirm nvidia lib32-nvidia-libgl
Knows anyone a solution?
Regards
Debellator

Hello,
thanks for you suggestions. So I updated my 10-monitor.conf
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "1"
EndSection
Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24 #Choose the depth (16||24)
Option "Metamodes" "LVDS-0: nvidia-auto-select; 1366x768_60 {ViewPortIn=640x480, ViewPortOut=640x480+120+0};"
SubSection "Display"
Depth 24
Modes "1366x768" "1024x768" "800x600" "640x480" #Choose the resolution
EndSubSection
EndSection
Unfoftunately it does not help. I still get the same error message.

Similar Messages

  • Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

    Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

    Hi Liz,
    Sorry to hear you are having a similar problem.  Last night I went to the tool bar at the top of iphoto, clicked on "File",  then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups  opened the iphoto pages in the Time Machine.  I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked  "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1).  I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do. 
    The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu,  when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.  
    I am now a happy camper. 
    I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto,  that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"? 
    Good luck Liz,  if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
    Karen

  • Blue screen when attempting to use the dedicated video card

    I keep getting a blue screen when attempting to use the dedicated video card.
    I managed to install the AMD driver for it but without the other components like the Catalyst Control Center as it blue screened on startup when attempting to load the Catalyst Control Center.
    The OS loads fine. Any applications that don't use the dedicated video card runs fine. All other drivers install fine as well.
    Applications like games and Photoshop that switch to the dedicated video card on startup automatically crashes, the OS freezes then a blue screen appears.
    What could be causing the problem? This problem just recently appeared. Two weeks ago.

    boogs wrote:
    I tried installing the drivers for my laptop from HP's support site. Still the same result.
    This problem only appeared a few weeks ago. Before that, the same drivers from the HP site installed and functioned normally.
    Could this be a problem with the graphics card itself?
    Note sure but if we can know the system P/N others can look to see what drivers it has for the graphics to know what is there.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • I just bought a new iphone 4S and its has green and purple striiples on the screen when not in use, I took it back to store and they said it was the display protector that is making the striples?

    I just bought a new apple iphone 4S and its has green and purple striples on it when not in use, is this norm? I took it back to the Verizonwirless and they said it was from the display protector on the screen?

    it was from the display protector on the screen?
    Most likely that is the reason.  I have a screen protector on and see similar issues when the iPhone is not on.  They're not noticeable when turned on.  Remove it and see the difference.

  • Does anyone know how to stop my I Pad from going to the main screen when I'm using it ?

    Every time I use my I pad on any screen it jumps back to the main screen any ideas

    I'm not sure if this will do it, but try a rest. Hold down the sleep and home buttons at the same time for about 15 seconds until the Apple appears.
    Hope this helps.

  • My 2007 iMac seems to reset the home screen when not in use.  I am running mavericks and have had no other issues... just curious if this is a sign of something worse or to come?

    I updated to Mavericks and love it.  Its made both my 2007 iMac and 2007 MacBookPro faster.  But I have noticed in the last couple of days that my iMac screen with periodically go blank except for the background photo I set... then just as fast the icons on the desktop flash back up.  Is this a sign of something wrong or impending?  

    Finder crashes are often caused by "Google Drive." If it's installed, I suggest you remove it according to the developer'sinstructions. You may need to boot in safe mode to do so. Back up all data before making any changes.
    If you use Google Drive and don't want to remove it, then try deselecting the option in its preferences to show a status icon. According to reports, that may be enough to stop the Finder from crashing.

  • Cannot set focus when reset data using datasets

    Hi All,
    When I click reset form button. I would like to reset data then focus to the first field. I can clear information I provided but setFocus to the first name field is not working. Please help.
    I use datasets to reset data. 
    Here is my coding:
    event: click
    xfa.datasets.data.loadXML("<form1/>", true, true);
      xfa.host.setFocus("xfa.form1.contactInformation.firstname")
    Thanks,
    Cindy

    I tested the clear button. But it is not set Focus to the first field. It is not successful.

  • Blank display when exiting X, using NVidia blob

    I'm using the proprietary NVidia drivers for my Macbook's 9400M graphics card, and while X can start, it seems to have trouble quitting. I can startx normally, but if I kill X or quit my window manager, the screen will go entirely blank. The system is not actually frozen, because if I issue a "reboot" command while in X, the screen will blank for just a moment (as opposed to showing the console, which it usually does) before rebooting normally. I've also tried to startx from the console, quit the WM, and blindly type "sudo reboot" and my password, after which the computer still reboots. If I blindly type "startx", the display will show whatever's in X as it would normally, but once again blanks when I return to the console. Xorg.0.log says that the server terminated normally.
    It seems to me that the console is still present and working, but not doing anything. What can I do to restore its normal behavior while keeping the NVidia binary blob?
    EDIT: I might not have been clear on what happens when I first start the computer. The console appears normally before X starts, but it only breaks after X has been started at least once.
    Last edited by DrKillPatient (2012-08-26 20:00:35)

    > Don't suppose you can think of any workarounds, can you?
    Try downgrading if possible. There are some kernel line switches that may help (e.g. acpi=off) but it's all Greek me.
    Edit: http://idyllictux.wordpress.com/2010/04 … ed-driver/
    Edit 2: http://www.nvnews.net/vbulletin/forumdisplay.php?f=26
    Last edited by karol (2010-07-25 17:08:36)

  • Strange small glyph in the middle of the screen when using LabVIEW 8.2.1

    I've started noticing a strange small glyph in the middle of the screen when I am using LabVIEW 8.2.1.
    Sometimes it is there, sometimes it isn't. Has anyone else seen this? Why is it there? Can I get rid of it?
    (Just in case you think I am going crazy from too much LabVIEW I'll include a screen capture of it...)
    Well that's it. I barely noticed it on my blue/ background picture. It seems to be there on my XP machine but not my Win2K machine.
    Message Edited by Troy K on 10-11-2007 10:49 AM
    Troy
    CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
    I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
    Beware of the man who won't be bothered with details. - William Feather
    The greatest of faults is to be conscious of none. - Thomas Carlyle
    Attachments:
    strange glyph.PNG ‏1 KB

    It's something from your video driver (If I recall correctly an NVIDIA).
    LabVIEW creates somewhere off-screen a window with  a size of 0,0. The driver detects this and as som sort of anti-spam moves it on-screen.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • White spot appears in one corner of the screen when watching YouTube videos?

    Hello.  I have a fifth generation iPod Touch and when I watch YouTube videos, I notice a little white spot appear in only one corner on the screen.  It does not show up on the screen when I am using applications, just on YouTube.  Why is that happening?

    What happens when you view in landscape orientation?Try:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Limited functionality in Win 8.1 Start Screen when using Server 2012 GPO

    I'm testing Windows 8.1 EE with Server 2012 for a school where I need to configure a common layout that users are unable to change. So, I have configured a start layout and exported it via Powershell to the server and it works fine across my various test
    user ids apart from a couple of things.
    If I create tiles on the start screen which point to specific websites such as Scratch, they only work on the user I exported the start layout from - they don't appear on other user start screens under the same GPO. I can get round this by creating a desktop
    shortcut in the GPO under User Config/Prefs/Win settings/shortcuts. It's a bit crude but it works so if there is a straightforward way of creating tiles that do this I'd prefer that..
    The other challenge is getting a documents tile on the start screen. I'm using roaming profiles and folder redirection as pupils could log onto any machine and once again, I can set this up and export the start layout to the server but only the user whose
    start screen I exported gets the documents folder on their start screen when the GPO is applied. The other users just get a blank space. I guess when I create the tile it's pointing to the specific users folder on the server which other users won't have access
    to so it needs to pick up the specific username of whoever is logged on...
    Any suggestions would be appreciated... Thanks

    Hi,
    Please make sure that the .xml file with the Start screen layout must be located on shared network storage that is available to the users’ computers when they sign in (the users must have Read-only access to the file). If the
    file is not available at sign-in, the Start screen is not customized during the session, and the user can make changes to the Start screen.
    After you use Group Policy to import a customized Start screen layout on a computer or in a domain, you can update the layout simply by replacing the .xml file that is specified in the Start Screen Layout policy settings.
    To change the Start screen layout imported by Start Screen Layout policy settings
    Customize the Start screen on your test computer the way that you want it to look for users.
    Run the Export-StartLayout cmdlet, with the following format, to export the new Start screen layout to an .xml file that overwrites the original file:
    export-startlayout –path <path><file name>.xml -as xml
    That’s all you need to do. The next time the users sign in to their computers, the GPO will import the new Start screen layout.
    Kate Li
    TechNet Community Support

  • I cannot "click" on the top inch of any screen when in firefox. This prevents me from signing in and out of certain webpages. This doesn't happen when I am either on my desktop or using IE. I love firefox, but this is frustrating. HELP!

    I cannot "click" on the top inch of any screen when in firefox. This prevents me from signing in and out of certain webpages. If I minimize the screen this does not go away either. This doesn't happen when I am either on my desktop or using IE. I love firefox, but this is frustrating! Help!

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Cannot resize collapse/expand window when no project is open

    Using Premier Pro CC 2014 on Windows, when I first launch Premier and no project is open, I cannot resize the Premier window, nor can I collapse or expand it. Is that just a bug?

    Post a screen grab please.
    I am interested to see where you are in this "issue".

  • How do I turn off the tiny Shuffle-sized iPod Nano (v6 with a touch screen) when not using its iOS?

    Hello and happy new year.
    I decided to use this used iPod Nano (touch screen) as an eight/8 GB flash disk/storage (FAT32). I can access the files just fine. I can always restore it back to use iOS quickly and easily if needed.
    However, it never seems to turn off/sleep. I tried holding down the big button on top right (next to the two volume controls [+ and -]), but it never does anything. Also, it says "OK to disconnect." when disconnected.
    So, I restored its iOS v1.2 from an old 15" MacBook Pro (2008; Mac OS X 10.5.8) onto it and can turn off easily. However, I cannot access its drive since it is not a MS FS and Windows XP Pro. SP3 asked me to format. How can I turn it off and still use it as an 8 GB USB flash disk/drive without installing and using iTunes?
    Thank you in advance.

    Hey,
    Holding in the play/pause and the menu (select) button will force the iPod into disk mode. This is the stand by mode you are talking about.
    To turn your iPod off properly you will want to hold down the play/pause button until the screen goes blank and then turn the hold switch on. This is cause the iPod to go to the Apple screen when it turns back on.
    Hope this helps,
    Ms D.

  • I have iphone 4s with iO6. My problem is I can no longer update my apps since "cannot connect to itunes" always shows on my screen when i try to. Tried fixing by changing the dates, turning off location as suggested in some forums but both didn't work!

    I have iphone 4s with iO6. My problem is I can no longer update my apps since "cannot connect to itunes store" always shows on my screen when i try to. Tried fixing by changing the dates, turning off location as suggested in some forums but both didn't work!  Please help!! Thanks.

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

Maybe you are looking for