Wine Does Not See Network Printer

I have an hp wireless printer setup on my network. I added it in hplip and it is showing up on CUPS and works fine from everything in Arch.
This is what CUPS looks like:
Driver: HP Envy 4500 Series, hpcups 3.14.10 (color, 2-sided printing)
Connection: hp:/net/ENVY_4500_series?ip=192.168.2.242
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
When I try to print from Wine using Notepad, an error message pops and says
"Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer. Please install one and retry."
This is the error that displays in the prompt:
fixme:winspool:WINSPOOL_EnumPrintersW We don't handle PRINTER_ENUM_CONNECTIONS
Everything I have read says if the printer is on CUPS, wine should see it automatically. I am using the 64-bit OS. Any ideas?

My printer is also on wi-fi. In the past (under os-x) I always had some problems with the scanner - generally I would get a message "Failed to open a session on the device". It happened infrequently, usually after several days of having my mac on. I could fix the problem by login-out and in again or by changing to guest and then back again. However, with Maverick the problem with the scanner and error "failed to open a session on the device" always occurs. I can't print either - the printer queue says it can't connect to the printer. To answer your question regarding HP software... there is no HP software for the mac. I am using the MAC device drivers that were loaded when I connected my printer. I can print from my iphone/ipad through airprint... but can't seem to print from my mac with maverick.
I did logout and login yesterday to finally install the printer drivers. But today - I can't connect to the printer. BTW all other computers and devices can print to this printer.

Similar Messages

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Macbook does not see wireless printer

My laserjet 1102w is connected to an airport extreme and I can print wirelessly from a windows 7 pc.
However, my Macbook Pro does not see the wireless printer. I can print though if I connect the printer directly via USB.
When trying to add a printer via the '+'button in Finder > Printer & Fax there is no response and nothing to connect to.
Anyone knows how to resolve this ?

Hi,
Be sure to enable Wireless Direct as listed within Steps one below, as well locate the display name as listed:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03351623&cc=us&dlc=en&lc=en &product=5169041&tmp_track_link=ot_search#N96
Once you are done click the WiFi icon on your Mac and select Join Other Network.
Click on Show Networks and the Wireless Direct network should be listed there.
Shlomi

My computer does not see my printer

Hi: I am having a problem with my HP Photosmart 4500 printer. My computer does not see it. I have a USB connected to it, have uninstalled and installed the software two time, dowloaded the latest update and nothing. Add to that, I can not connect it by WIFI. WIFI on the printer is on but again, it's no where on any of the screens. The only variable I can think of that has changed has been the router I got recently from AT&T. Everything else works with the WIFI but no computer. I'm running 10.7.5. I have read the install instructions and nothing seems to be working. The one thing I do get from the HP install disc is a message reading the printer isn't recognized but there are no updates in support. OK, what am I missing here?

Try these steps to uninstall the current software using the HP scrubber and then reinstall using the current HP driver available through Apple.
To do so, perform the following steps:
1. Go to Applications/Hewlett Packard/ and then click on “HP Uninstaller”
2. Next click “Continue”
3. Highlight the device on the left pane.
4. Press and hold control+alt+command on the keyboard simultaneously while you click on “Uninstall”.
5. After you do this, you will see a pop up that asks you if you want to uninstall all HP software. Please note, that in doing this, it will remove any other HP printers that you also have installed.
6. Click “continue” and wait for the program to finish.
7. After it completes, reboot your computer.
Once the computer is back on, do the following steps:
WARNING: This is will delete all of your printers.
1. Go into “System Preferences” and then select either “Print & Scan” or "Print & Fax".
2. Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.
After you have reset the printing system, let's make sure you have the most recent HP driver package installed.
You can do this two ways. First, check for any available HP Update's by clicking the Apple icon and then Software Update. If there are any updates available, they should show up here. However, if the printer is connected by USB, it will not show any available updates. The other option is downloading the drivers from Apple's website.
You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
Once you have downloaded the driver package and completed the installation, you will want to plug your printer back in (if you were using a USB connection). After the printer is plugged back in, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box. Make sure that says the name of your printer and not AirPrint. If you are using the printer wirelessly, make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
Best of luck,
Kyle

My mac does not see my printer

my mac does not see my printer

Is the printer physically connected to the computer with a cable, or is it wireless. Did you install the printer drivers from the manufacturers web site, for your specific OS?

Macbook osx does not see the printer on my xp pc

After hours I managed to connect my macbook to my PC (wireless ethernet network)and share folders bothways. But now I have another obstacle to overcome. I cannot print from macbook to a canon ip8500 printer connected (via USB) to my PC (Xp pro sp2). I followed the instructions of ifelix but my macbook does not recognize the printer at all.
Any tips? Looking forward to your help.

False alarm! My router assigns the first IP address to the computer I first open. And this time I first opened the Mac. Then everything went wrong. Now I know where to look for!

Previously networked computer does not see network

I recently exchanged my Airport Extreme for a Time Capsule. My iMac picked it up immediately. Another networked iMac has been a little bit of a problem, since it occasionally gives me a message that it is not connected to the internet, despite the fact that the network shows up. Through trial and error I can usually get it back on track. My biggest problem is the Powermac G5, which always picked up the network, and which does not see it at all. I entered the name of the network with the password, and got a message that there was an error connecting to it. No network at all shows up in the drop down menu for Airport. What am I doing wrong here???

Leslie Weinberg wrote:
I recently exchanged my Airport Extreme for a Time Capsule. My iMac picked it up immediately. Another networked iMac has been a little bit of a problem, since it occasionally gives me a message that it is not connected to the internet, despite the fact that the network shows up. Through trial and error I can usually get it back on track. My biggest problem is the Powermac G5, which always picked up the network, and which does not see it at all. I entered the name of the network with the password, and got a message that there was an error connecting to it. No network at all shows up in the drop down menu for Airport. What am I doing wrong here???
You might try the three suggestions in the second message of this thread:
http://discussions.apple.com/message.jspa?messageID=10445592
They may not help, but they're easy to try and shouldn't hurt anything.

PC itunes does not see network

Hi all,
My MM can see the itunes Airport speakers, but the itunes does not see the speakers (the dropdown menu at the bottom of the interface) on my PC laptop. It used to, but since I switched routers it doesn't anymore. Any idea to configure the PC itunes?

fixed itself it seems.

HT4356 My iPad does not see my printer on the network. The printer says it is connected and I can ping it from my pc, but the iPad does not seem to be able to find it. I am going though an AOL supplied router, I have read this can cause issues, is this

I am trying to print from my iPad to a HP 3520 printer using AirPrint. I have connected the printer to my local wireless network and it confirms it is connected. However my iPad can not find the printer on the network when it searches for it. I am using an AOL supplied router and have read reports that this can cause problems. Is this the case? How do I resolve this issue?

Hi,
That indeed can be caused by a router as Apple's AirPrint uses Bonjour to communicate with the device.
Bonjour Services relies on IP Multicasting which have to be supported by your network.
To isolate the problem, please follow the steps below to enable Wireless Direct and directly connect the iPad to your printer (which means without using the router).
Once the iPad connected to the Wireless Direct network try printing and check for any difference.
If the printer can be found via the temporary connection but not through your router that indicates lack of Multicast support or wrong configuration of your router.
In such a case be sure to contact AOL and check if the router support Multicasting, if so ensure it is enabled within your router configuration, as well ensure it have the latest firmware installed..
Shlomi

MacBook does not see LAN Printer

I have a Macbook connected by airport to a LAN. It sees the internet but not the LAN printer. The Printer, Canon PRIXMA MX 700, is conected to the LAN by eithernet as well as a PC desktop with XP. The MAC dropped seeing the printer after working fine. Ihave down loaded new Canon drivers,used the Canon network tool and tried to match the printer IP address to the MAC. Nothing works

I presume you're working with a home set-up and that your DHCP server is also your wi-fi router. All wi-fi router's are different and their configuration utilities differ. You need to login to the router with the admin account and look for the DHCP server config page. If it's not obvious look for local network config or LAN config and it should be under that. What you need to do is set the start address and end address for the DHCP server range. Presumably the router is 192.168.0.1 so you need to set the start address to 192.168.0.2. You have set the printer to 192.168.0.50 so set the end address to 192.168.0.49. That gives you 48 addresses in the range which should be more than enough for a home set-up. In fact, for security purposes, I would set the end address to the number of devices you want to connect, plus one. So, if you have let's say three computers and an iPhone that's four devices to connect to the network so set the end address to 192.168.0.5. That will go at least some way to limiting any rogue users getting into your network tho' you should have WPA2 encryption enabled too. But I believe in a belt-and-braces approach to security!

AirPort in Intel iMac loses connection and does not see network

I bought an Intel iMac in the summer of '06. I had no problems connecting my airport card to my house wireless network which uses an AirPort Extreme Base Station.
In september I brought my iMac to college and used an AirPort Express as my base station. I had no problems other than that the computer did not automatically reconnect to the network upon start up.
In december I returned home and configured the AirPort Express (located on the main level of the house) to extend the network of the AirPort Extreme (located upstair in the bedroom next to my iMac).
Lately the iMac loses connectivity to the wireless network randomly while the computer is on, even in the middle of using it. Not only does it lose the signal but does not list my network when i click the airport signal icon on the top bar of the screen. Once in a while it will have it listed but will give me an error when trying to connect. The only way I have of fixing the problem is to restart the computer.
I know the airport base station works fine and the network is still there becasue I have a PowerBook G4 that I will put right next to the iMac and the PowerBook will still be connected to the network.
Can someone help?

I have a very similar problem. My machine's airport connection has always been a little flaky, but it's always gone on working. However, yesterday I turned on WEP 128 bit encription. It now connects for a few minutes and then I see the signal strength gradually die until it goes off completely. There are then two ways to get it back working: 1. close the lid, then open it again; 2. tun off the airport, then turn it on again. When I do that the signal strength suddenly comes on full after about 3 seconds. The G4 iMac I have doesn't suffer from this problem. I am using a netgear access port as the base station.
Macbook Pro Mac OS X (10.4.8)

Iphone does not "see" network

friend visiting my daughter. her new iphone does not locate my daughter's wifi. my daughter is connected to it with mer macbook. the phone "sees" other networks in the areas. why not this one?
PS had her shut down phone and then turn it back on. no effect.
had her enter the network name in "Other," but it still could not locate it.

it is not hidden.
N (airport extreme base station)
other devices, including my iphone, have connected to this network recently. as noted, my daughter's macbook "sees" and is connected to the network.
the network is up and available.
the iphone can detect other networks in the vicinity, also detected by the macbook, but not the one located 20 feet away.
has to be something regarding that iphone, right?
device has been restarted.

OEL6.1 in VM manager does not see network card

I installed OL6.1 as a guest machine in VM manager. I started the install process and when I got to the network configuration it would not let me click on "configure network", it was greyed out. I thought that was a little bit odd but I just thought that I would configure it later. Once I got to the desktop of OL6.1 i checked for the eth0 settings but there was no eth0 at all. The OL6.1 did not even know a network card existed, but I tried to add it manually and still it did not see anything and would not connect to the internet. Has anyone seen this problem before? Thanks.

I will try to answer to the best of my knowledge your questions but I am a bit new at this. I downloaded the OEL 6.1iso media from Oracle site, I then imported it into the resources section in VM manager 2.1.
I then used the create new Virtual Machine and selected the server pool.
I selected the ISO file with OEL 6.1.
I gave it a name, memory size, console password.
Below that I can see the Virtual Network Interface is selected and it shows Bridge xenbr0.
It is showing Fully Virtualized machine not paravirtualized mode. As far as I know I did not install in Xen HVM or with PV drivers.
That is about all I did. Then I started the machine and when through the install process but it did not see the virtual network device.

Have Photoshop Elements 12, recently purchased Epson Workforce WF-7620 Printer/scanner , cannot import scanned pictures into Photoshop, does not see the Printer/scanner.

How can I get my Photoshop Elements 12 to import scanned images from my Epson Workforce WF-7620 ?. The program does not recognise the Priner/scanner.
Bruce

Is it trying to get you to join photoshop.com? The easiest way around that is not to use the welcome screen. Go into the program files and make direct shortcuts for the organizer and/or editor and start PSE that way from now on. Photoshop.com is dead and gone so the welcome screen will hang up trying to connect to something that no longer exists.

Using HP8500 wireless with other Macs but iPad2 does not see the printer on the network .. what needs to be done for the iPad to see the HP printer?

iPad2 doesn't see HP8500 wireless printer .. other Macs (Air & Mini) have no trouble printing ..

Same with mine. MacBook and pc both print fine but not my ipad2.

Wine Does Not See Network Printer

Similar Messages

Maybe you are looking for